Free-and open source software for a course on network management: authoring and enactment of scripts based on collaborative learning strategies

This paper describes a Computer-Supported Collaborative Learning (CSCL) case study in engineering education carried out within the context of a network management course. The case study shows that the use of two computing tools developed by the authors and based on Free- and Open-Source Software (FOSS) provide significant educational benefits over traditional engineering pedagogical approaches in terms of both concepts and engineering competencies acquisition. First, the Collage authoring tool guides and supports the course teacher in the process of authoring computer-interpretable representations (using the IMS Learning Design standard notation) of effective collaborative pedagogical designs. Besides, the Gridcole system supports the enactment of that design by guiding the students throughout the prescribed sequence of learning activities. The paper introduces the goals and context of the case study, elaborates onhow Collage and Gridcole were employed, describes the applied evaluation methodology, anddiscusses the most significant findings derived from the case study.

Discovering the campus together: a mobile and computer-based learning experience

One of the most relevant difficulties faced by first-year undergraduate students is to settle into the educational environment of universities. This paper presents a case study that proposes a computer-assisted collaborative experience designed to help students in their transition from high school to university. This is done by facilitating their first contact with the campus and its services, the university community, methodologies and activities. The experience combines individual and collaborative activities, conducted in and out of the classroom, structured following the Jigsaw Collaborative Learning Flow Pattern. A specific environment including portable technologies with network and computer applications has been developed to support and facilitate the orchestration of a flow of learning activities into a single integrated learning setting. The result is a Computer-Supported Collaborative Blended Learning scenario, which has been evaluated with first-year university students of the degrees of Software and Audiovisual Engineering within the subject Introduction to Information and Communications Technologies. The findings reveal that the scenario improves significantly students’ interest in their studies and their understanding about the campus and services provided. The environment is also an innovative approach to successfully support the heterogeneous activities conducted by both teachers and students during the scenario. This paper introduces the goals and context of the case study, describes how the technology was employed to conduct the learning scenario, the evaluation methods and the main results of the experience.

Case-based learning in VTLE: An effective strategy for improving learning design

This article presents preliminary research from an instructional design perspective on the design of the case method as an integral part of pedagogy and technology. Key features and benefitsusing this teaching and learning strategy in a Virtual Teaching and Learning Environment(VTLE) are identified, taking into account the requirements of the European Higher Education Area (EHEA) for a competence-based curricula design. The implications of these findings for alearning object approach exploring the possibilities of learning personalization, reusability and interoperability trough IMS LD, are also analyzed.

Using problem-based learning for introducing producer theory and market structure in intermediate microeconomics

This paper shows how instructors can use the problem‐based learning method to introduce producer theory and market structure in intermediate microeconomics courses. The paper proposes a framework where different decision problems are presented to students, who are asked to imagine that they are the managers of a firm who need to solve a problem in a particular business setting. In this setting, the instructors’ role isto provide both guidance to facilitate student learning and content knowledge on a just‐in‐time basis

El proyecto ‘Ecosportech’ como ejemplo de universidad emprendedora. Una experiencia a base del ‘Problem Based Learning’

El objetivo de este artículo es presentar el proyecto EcoSPORTech, cuya finalidad es la creación de una empresa social con jóvenes para la realización de actividades deportivas/ocio en el medio natural, integrando las nuevas tecnologías. Este proyecto supone una colaboración interdisciplinaria dentro de la Universidad de Vic, entre las facultades de Empresa y Comunicación (FEC), la de Ciencias de la Salud y el Bienestar (FCSB) y la de Educación (FE) e integra un equipo de profesionales procedentes de los ámbitos de la empresa, el marketing, el periodismo, el deporte y la terapia ocupacional. Estos profesores formarán al grupo de jóvenes con los que se creará la empresa y dirigirán la misma. Esta empresa (cooperativa) se integra en el vivero de empresas sociales que se está creando en la Universidad de Vic.

Assessing technology-based spin-offs from university support units

This paper takes a regional studies approach to assess spin-offs from a university-based technology transfer network. We first detect the regional objectives, inputs and outputs needed to assess spin-offs from support programmes. We then provide evidence on regional mechanisms for firm creation. We analyse spin-offs created at Catalan universities and find that many efficient spin-offs have formal technology transfer agreements, and emerge from technology-oriented universities. We also find that higher innovation levels and experience from the parent university are associated with higher efficiency, which is positively related to future fundamental profitability. Finally, we propose regional policy making and research directions.

Análisis de una experiencia de aprendizaje basado en proyectos en la asignatura de Fundamentos de Física = Project based learning: analysis of an experience in Introductory Physics courses

In this work we present and analyze the application of an experience of Project Based Learning (PBL) in the matter of Physics II of the Industrial Design university degree (Girona University) during 2005-2006 courses. This methodology was applied to the Electrostatic and Direct Current subjects. Furthermore, evaluation and self evaluation results were shown and the academic results were compared with results obtained in the same subjects applying conventional teaching methods

The practical application of e-Portfolio at the Open University of Catalonia : assessment of competence based learning

The paper presents the results of the piloting or pilot test in a virtual classroom. This e-portfolio was carried out in the 2005-2006 academic year, with students of the Doctorate in Information Society, at the Open University of Catalonia. The electronic portfolio is a strategy for competence based assessment. This experience shows the types of e-portfolios, where students show their work without interactions, and apply the competence-based learning theories in an interactive portfolio system. The real process of learning is developed in the competency based system, the portfolio not only is a basic bio document, has become a real space for learning with competence model. The paper brings out new ideas and possibilities: the competence-based learning promotes closer relationships between universities and companies and redesigns the pedagogic act.

A Classification of Tools for Learning Logic

A table showing a comparison and classification of tools (intelligent tutoring systems) for e-learning of Logic at a college level.

Towards reusability and tailorability in collaborative learning systems using IMS-LD and grid services

CSCL applications are complex distributed systems that posespecial requirements towards achieving success in educationalsettings. Flexible and efficient design of collaborative activitiesby educators is a key precondition in order to provide CSCL tailorable systems, capable of adapting to the needs of eachparticular learning environment. Furthermore, some parts ofthose CSCL systems should be reused as often as possible inorder to reduce development costs. In addition, it may be necessary to employ special hardware devices, computational resources that reside in other organizations, or even exceed thepossibilities of one specific organization. Therefore, theproposal of this paper is twofold: collecting collaborativelearning designs (scripting) provided by educators, based onwell-known best practices (collaborative learning flow patterns) in a standard way (IMS-LD) in order to guide the tailoring of CSCL systems by selecting and integrating reusable CSCL software units; and, implementing those units in the form of grid services offered by third party providers. More specifically, this paper outlines a grid-based CSCL system having these features and illustrates its potential scope and applicability by means of a sample collaborative learning scenario.

Reusing IMS-LD formalized best practices in collaborative learning structuring

Designs of CSCL (Computer Supported Collaborative Learning)activities should be flexible, effective and customizable toparticular learning situations. On the other hand, structureddesigns aim to create favourable conditions for learning. Thus,this paper proposes the collection of representative and broadlyaccepted (best practices) structuring techniques in collaborative learning. With the aim of establishing a conceptual common ground among collaborative learning practitioners and softwaredevelopers, and reusing the expertise that best practicesrepresent, the paper also proposes the formulation of these techniques as patterns: the so-called CLFPs (CollaborativeLearning Flow Patterns). To formalize these patterns, we havechosen the educational modelling language IMS Learning Design (IMS-LD). IMS-LD has the capability to specify many of the collaborative characteristics of the CLFPs. Nevertheless, the language bears limited capability for describing the services that mediate interactions within a learning activity and the specification of temporal or rotated roles. This analysis isdiscussed in the paper, as well as our approaches towards thedevelopment of a system capable of integrating tools using IMSLDscripts and a CLFP-based Learning Design authoring tool.

A Classification of Tools for Learning Logic

A table showing a comparison and classification of tools (intelligent tutoring systems) for e-learning of Logic at a college level.

Faculty-librarians collaboration in an e-learning experience : resources management and training in Open University of Catalonia (UOC)

The traditional model of learning based on knowledge transfer doesn't promote the acquisition of information-related competencies and development of autonomous learning. More needs to be done to embrace learner-centred approaches, based on constructivism, collaboration and co-operation. This new learning paradigm is aligned with the European Higher Education Area (EHEA) requirements. In this sense, a learning experience based in faculty' librarian collaboration was seen as the best option for promoting student engagement and also a way to increase information-related competences in Open University of Catalonia (UOC) academic context. This case study outlines the benefits of teacher-librarian collaboration in terms of pedagogy innovation, resources management and introduction of open educational resources (OER) in virtual classrooms, Information literacy (IL) training and use of 2.0 tools in teaching. Our faculty-librarian's collaboration aims to provide an example of technology-enhanced learning and demonstrate how working together improves the quality and relevance of educational resources in UOC's virtual classrooms. Under this new approach, while teachers change their role from instructors to facilitators of the learning process and extend their reach to students, libraries acquire an important presence in the academic learning communities.

La formulación magistral: adquisición de compètencias mediante ABP y estrategias no presenciales

[cast] La formulación magistral, una de las actividades profesionales más representativas del farmacéutico, consiste en la elaboración, de acuerdo con una prescripción médica, de un medicamento personalizado, adaptado a un paciente concreto, en un compromiso profesional de solucionar un problema de salud específico. La amplia oferta de medicamentos industriales ha reducido considerablemente esta actividad, que a pesar de todo, debe considerarse una herramienta de futuro en sintonía con la tendencia personalizadora actual de la medicina y las necesidades del paciente. Los conocimientos y competencias requeridas para dicha actividad profesional se introducen actualmente en la carrera de Farmacia mediante una asignatura optativa. En el presente trabajo se presenta el planteamiento metodológico diseñado por el Grupo de Innovación Docente de Tecnología Farmacéutica (GIDTF) y el grupo e-Galenica, ambos de la Universidad de Barcelona, para esta asignatura. Dicha metodología esta basada en el Aprendizaje Basado en Problemas (ABP) incluyendo tutorías y prácticas de campo, apoyada en estrategias no presenciales como foro de debate, recursos on-line, cuestionarios y tareas de autoevaluación a través de la plataforma Moodle del Campus Virtual de la UB. Se evalúan asimismo los resultados académicos y las respuestas de los estudiantes a las encuestas realizadas en relación al sistema de impartición de la asignatura. [eng] The pharmaceutical compounding, one of the most representative professional activities of pharmacists, involves the preparation of an individualized medicine tailored to a specific patient in a professional commitment to solve a specific health problem, according to a prescription. The wide range of industrial medicine has significantly reduced this activity, which nevertheless should be considered a tool of the future in line with the current trend of personalizing medicine and patient needs. The knowledge and competences required for this professional activity are introduced to the students of Pharmacy through an optional subject. In this paper we present the ethodological approach developed for this subject by the Teaching Innovation Group of pharmaceutical Technology (GIDTF) and e-Galenica group, both from the University of Barcelona. This methodology is based on Problem-Based Learning (PBL) including tutorials and practices in other centres, supported by out of class strategies as discussion forum, online resources, self-assessment questionnaires and work through the platform Moodle of Virtual Campus UB. The academic performance and student responses to surveys in relation to the didactic methodology are also assessed.