Variable-stiffness composite panels: Defect tolerance under in-plane tensile loading

Automated Fiber Placement is being extensively used in the production of major composite components for the aircraft industry. This technology enables the production of tow-steered panels, which have been proven to greatly improve the structural efficiency of composites by means of in-plane stiffness variation and load redistribution. However, traditional straight-fiber architectures are still preferred. One of the reasons behind this is related to the uncertainties, as a result of process-induced defects, in the mechanical performance of the laminates. This experimental work investigates the effect of the fiber angle discontinuities between different tow courses in a ply on the un-notched and open-hole tensile strength of the laminate. The influence of several manufacturing parameters are studied in detail. The results reveal that 'ply staggering' and '0% gap coverage' is an effective combination in reducing the influence of defects in these laminates

Assessing the structural change of strategic mobility: determinants under hypercompetitive environments

The primary purpose of this exploratory empirical study is to examine the structural stability of a limited number of alternative explanatory factors of strategic change. On the basis of theoretical arguments and prior empirical evidence from two traditional perspectives, we propose an original empirical framework to analyse whether these potential explanatory factors have remained stable over time in a highly turbulent environment. This original question is explored in a particular setting: the population of Spanish private banks. The firms of this industry have experienced a high level of strategic mobility as a consequence of fundamental changes undergone in their environmental conditions over the last two decades (mainly changes related to the new banking and financial regulation process). Our results consistently support that the effect of most explanatory factors of strategic mobility considered did not remain stable over the whole period of analysis. From this point of view, the study sheds new light on major debates and dilemmas in the field of strategy regarding why firms change their competitive patterns over time and, hence, to what extent the "contextdependency" of alternative views of strategic change as their relative validation can vary over time for a given population. Methodologically, this research makes two major contributions to the study of potential determinants of strategic change. First, the definition and measurement of strategic change employing a new grouping method, the Model-based Cluster Method or MCLUST. Second, in order to asses the possible effect of determinants of strategic mobility we have controlled the non-observable heterogeneity using logistic regression models for panel data.

The structural approach of a natrex model on equilibrium exchange rates

Following a general macroeconomic approach, this paper sets a closed micro-founded structural model to determine the long run real exchange rate of a developed economy. In particular, the analysis follows the structure of a Natrex model. The main contribution of this research paper is the development of a solid theoretical framework that analyse in depth the basis of the real exchange rate and the details of the equilibrium dynamics after any shock influencing the steady state. In our case, the intertemporal factors derived from the stock-flow relationship will be particularly determinant. The main results of the paper can be summarised as follows. In first place, a complete well-integrated structural model for long-run real exchange rate determination is developed from first principles. Moreover, within the concrete dynamics of the model, it is found that some convergence restrictions will be necessary. On one hand, for the medium run convergence the sensitivity of the trade balance to changes in real exchange rate should be higher that the correspondent one to the investment decisions. On the other hand, and regarding long-run convergence, it is also necessary both that there exists a negative relationship between investment and capital stock accumulation and that the global saving of the economy depends positively on net foreign debt accumulation. In addition, there are also interesting conclusions about the effects that certain shocks over the exogenous variables of the model have on real exchange rates.

The effect of structural fund spending on the spanish regions: an assessment of the 1994-99 objective 1 CSF

This paper analyzes the growth and employment effects of the 1994-99 Community Support Framework (CSF) for the Objective 1 Spanish regions using a simple supply-side model estimated with a panel of regional data. The results suggest that the impact of the Structural Funds in Spain has been quite sizable, adding around a percentage point to annual output growth in the average Objective 1 region and 0.4 points to employment growth. Over the period 1994-2000, the Framework has resulted in the creation of over 300,000 new jobs and has eliminated 20% of the initial gap in income per capita between the assisted regions and the rest of the country.

Structural inferences from first-price auction experiments

We use structural methods to assess equilibrium models of bidding with data from first-price auction experiments. We identify conditions to test the Nash equilibrium models for homogenous and for heterogeneous constant relative risk aversion when bidders private valuations are independent and uniformly drawn. The outcomes of our study indicate that behavior may have been affected by the procedure used to conduct the experiments and that the usual Nash equilibrium model for heterogeneous constant relative risk averse bidders does not consistently explain the observed overbidding. From an empirical standpoint, our analysis shows the possible drawbacks of overlooking the homogeneity hypothesis when testing symmetric equilibrium models of bidding and it puts in perspective the sensitivity of structural inferences to the available information.

Caracteritació de models funcionals d'àmfores romanes mitjançant Finite Element Analysis

Projecte de recerca elaborat a partir d’una estada al Laboratory of Archaeometry del National Centre of Scientific Research “Demokritos” d’Atenes, Grècia, entre juny i setembre 2006. Aquest estudi s’emmarca dins d’un context més ampli d’estudi del canvi tecnològic que es documenta en la producció d’àmfores de tipologia romana durant els segles I aC i I dC en els territoris costaners de Catalunya. Una part d’aquest estudi contempla el càlcul de les propietats mecàniques d’aquestes àmfores i la seva avaluació en funció de la tipologia amforal, a partir de l’Anàlisi d’Elements Finits (AEF). L’AEF és una aproximació numèrica que té el seu origen en les ciències d’enginyeria i que ha estat emprada per estimar el comportament mecànic d’un model en termes, per exemple, de deformació i estrès. Així, un objecte, o millor dit el seu model, es dividit en sub-dominis anomenats elements finits, als quals se’ls atribueixen les propietats mecàniques del material en estudi. Aquests elements finits estan connectats formant una xarxa amb constriccions que pot ser definida. En el cas d’aplicar una força determinada a un model, el comportament de l’objecte pot ser estimat mitjançant el conjunt d’equacions lineals que defineixen el rendiment dels elements finits, proporcionant una bona aproximació per a la descripció de la deformació estructural. Així, aquesta simulació per ordinador suposa una important eina per entendre la funcionalitat de ceràmiques arqueològiques. Aquest procediment representa un model quantitatiu per predir el trencament de l’objecte ceràmic quan aquest és sotmès a diferents condicions de pressió. Aquest model ha estat aplicat a diferents tipologies amforals. Els resultats preliminars mostren diferències significatives entre la tipologia pre-romana i les tipologies romanes, així com entre els mateixos dissenys amforals romans, d’importants implicacions arqueològiques.

Price level convergence, purchasing power parity and multiple structural breaks: an application to US cities

This article provides a fresh methodological and empirical approach for assessing price level convergence and its relation to purchasing power parity (PPP) using annual price data for seventeen US cities. We suggest a new procedure that can handle a wide range of PPP concepts in the presence of multiple structural breaks using all possible pairs of real exchange rates. To deal with cross-sectional dependence, we use both cross-sectional demeaned data and a parametric bootstrap approach. In general, we find more evidence for stationarity when the parity restriction is not imposed, while imposing parity restriction provides leads toward the rejection of the panel stationar- ity. Our results can be embedded on the view of the Balassa-Samuelson approach, but where the slope of the time trend is allowed to change in the long-run. The median half-life point estimate are found to be lower than the consensus view regardless of the parity restriction.

Structural decomposition analysis and input-output subsystems: An application to Spanish CO2 emissions

Analysis of gas emissions by the input-output subsystem approach provides detailed insight into pollution generation in an economy. Structural decomposition analysis, on the other hand, identifies the factors behind the changes in key variables over time. Extending the input-output subsystem model to account for the changes in these variables reveals the channels by which environmental burdens are caused and transmitted throughout the production system. In this paper we propose a decomposition of the changes in the components of CO2 emissions captured by an input-output subsystems representation. The empirical application is for the Spanish service sector, and the economic and environmental data are for years 1990 and 2000. Our results show that services increased their CO2 emissions mainly because of a rise in emissions generated by non-services to cover the final demand for services. In all service activities, the decomposed effects show an increase in CO2 emissions due to a decrease in emission coefficients (i.e., emissions per unit of output) compensated by an increase in emissions caused both by the input-output coefficients and the rise in demand for services. Finally, large asymmetries exist not only in the quantitative changes in the CO2 emissions of the various services but also in the decomposed effects of these changes. Keywords: structural decomposition analysis, input-output subsystems, CO2 emissions, service sector.

Macroeconomic shocks and the business cycle: evidence from a structural factor model

We use a dynamic factor model to provide a semi-structural representation for 101 quarterly US macroeconomic series. We find that (i) the US economy is well described by a number of structural shocks between two and six. Focusing on the four-shock specification, we identify, using sign restrictions, two non-policy shocks, demand and supply, and two policy shocks, monetary and fiscal. We obtain the following results. (ii) Both supply and demand shocks are important sources of fluctuations; supply prevails for GDP, while demand prevails for employment and inflation. (ii) Policy matters, Both monetary and fiscal policy shocks have sizeable effects on output and prices, with little evidence of crowding out; both monetary and fiscal authorities implement important systematic countercyclical policies reacting to demand shocks. (iii) Negative demand shocks have a large long-run positive effect on productivity, consistently with the Schumpeterian "cleansing" view of recessions.

Testing for sufficient information in structural VARs

We derive necessary and sufficient conditions under which a set of variables is informationally sufficient, i.e. it contains enough information to estimate the structural shocks with a VAR model. Based on such conditions, we suggest a procedure to test for informational sufficiency. Moreover, we show how to amend the VAR if informational sufficiency is rejected. We apply our procedure to a VAR including TFP, unemployment and per-capita hours worked. We find that the three variables are not informationally sufficient. When adding missing information, the effects of technology shocks change dramatically.

Intermediary and structural determinants of early childhood health in Colombia: exploring the role of communities

This study examines how structural determinants influence intermediary factors of child health inequities and how they operate through the communities where children live. In particular, we explore individual, family and community level characteristics associated with a composite indicator that quantitatively measures intermediary determinants of early childhood health in Colombia. We use data from the 2010 Colombian Demographic and Health Survey (DHS). Adopting the conceptual framework of the Commission on Social Determinants of Health (CSDH), three dimensions related to child health are represented in the index: behavioural factors, psychosocial factors and health system. In order to generate the weight of the variables and take into account the discrete nature of the data, principal component analysis (PCA) using polychoric correlations are employed in the index construction. Weighted multilevel models are used to examine community effects. The results show that the effect of household’s SES is attenuated when community characteristics are included, indicating the importance that the level of community development may have in mediating individual and family characteristics. The findings indicate that there is a significant variance in intermediary determinants of child health between-community, especially for those determinants linked to the health system, even after controlling for individual, family and community characteristics. These results likely reflect that whilst the community context can exert a greater influence on intermediary factors linked directly to health, in the case of psychosocial factors and the parent’s behaviours, the family context can be more important. This underlines the importance of distinguishing between community and family intervention programmes.

Predicting random level and seasonality of hotel prices. A structural equation growth curve approach

This article examines the effect on price of different characteristics of holiday hotels in the sun-and-beach segment, under the hedonic function perspective. Monthly prices of the majority of hotels in the Spanish continental Mediterranean coast are gathered from May to October 1999 from the tour operator catalogues. Hedonic functions are specified as random-effect models and parametrized as structural equation models with two latent variables, a random peak season price and a random width of seasonal fluctuations. Characteristics of the hotel and the region where they are located are used as predictors of both latent variables. Besides hotel category, region, distance to the beach, availability of parking place and room equipment have an effect on peak price and also on seasonality. 3- star hotels have the highest seasonality and hotels located in the southern regions the lowest, which could be explained by a warmer climate in autumn

Modelling structural zeros in compositional data

This analysis was stimulated by the real data analysis problem of householdexpenditure data. The full dataset contains expenditure data for a sample of 1224 households. The expenditure is broken down at 2 hierarchical levels: 9 major levels (e.g. housing, food, utilities etc.) and 92 minor levels. There are also 5 factors and 5 covariates at the household level. Not surprisingly, there are a small number of zeros at the major level, but many zeros at the minor level. The question is how best to model the zeros. Clearly, models that tryto add a small amount to the zero terms are not appropriate in general as at least some of the zeros are clearly structural, e.g. alcohol/tobacco for households that are teetotal. The key question then is how to build suitable conditional models. For example, is the sub-composition of spendingexcluding alcohol/tobacco similar for teetotal and non-teetotal households?In other words, we are looking for sub-compositional independence. Also, what determines whether a household is teetotal? Can we assume that it is independent of the composition? In general, whether teetotal will clearly depend on the household level variables, so we need to be able to model this dependence. The other tricky question is that with zeros on more than onecomponent, we need to be able to model dependence and independence of zeros on the different components. Lastly, while some zeros are structural, others may not be, for example, for expenditure on durables, it may be chance as to whether a particular household spends money on durableswithin the sample period. This would clearly be distinguishable if we had longitudinal data, but may still be distinguishable by looking at the distribution, on the assumption that random zeros will usually be for situations where any non-zero expenditure is not small.While this analysis is based on around economic data, the ideas carry over tomany other situations, including geological data, where minerals may be missing for structural reasons (similar to alcohol), or missing because they occur only in random regions which may be missed in a sample (similar to the durables)

Simultaneous estimation of indirect and interaction effects using structural equation models

Interaction effects are usually modeled by means of moderated regression analysis. Structural equation models with non-linear constraints make it possible to estimate interaction effects while correcting formeasurement error. From the various specifications, Jöreskog and Yang's(1996, 1998), likely the most parsimonious, has been chosen and further simplified. Up to now, only direct effects have been specified, thus wasting much of the capability of the structural equation approach. This paper presents and discusses an extension of Jöreskog and Yang's specification that can handle direct, indirect and interaction effects simultaneously. The model is illustrated by a study of the effects of an interactive style of use of budgets on both company innovation and performance