Preliminary study of cooperation in hybrid ad-hoc networks

In this paper, we present a first approach to evolve a cooperative behavior in ad hoc networks. Since wireless nodes are energy constrained, it may not be in the best interest of a node to always accept relay requests. On the other hand, if all nodes decide not to expend energy in relaying, then network throughput will drop dramatically. Both these extreme scenarios are unfavorable to the interests of a user. In this paper we deal with the issue of user cooperation in ad hoc networks by developing the algorithm called Generous Tit-For-Tat. We assume that nodes are rational, i.e., their actions are strictly determined by self-interest, and that each node is associated with a minimum lifetime constraint. Given these lifetime constraints and the assumption of rational behavior, we study the added behavior of the network.

The biophysical perspective of a middle income economy: material flows in Mexico

We analyse natural resource use dynamics in the Mexican economy during the last three decades. Despite low and uneven economic growth, the extraction and use of materials in the Mexican economy has continuously increased during the last 30 years. In this period, population growth rather than economic growth was the main driving force for biophysical growth. In addition, fundamental changes have taken place in the primary sectors, in manufacturing, and in household consumption and these are reflected in an increasing emphasis on the use of fossil fuels and construction materials. Mexico’s economy has been strongly influenced by international trade since the country commenced competing in international markets. In the 1970s, Mexico mainly exported primary resources. This pattern has changed and manufactured goods now have a much greater importance due to a boom in assembling industries. In contrast with other Latin American countries, Mexico has achieved a diversification of production, moving towards technology-intensive products and a better mix in its export portfolio. However, crude oil exports still represent the single most important export good. Mexico’s material consumption is still well below the OECD average but is growing fast and the current resource use patterns may well present serious social and environmental problems to the medium and long term sustainability of Mexico’s economy and community. Information on natural resource use and resource productivity could provide valuable guidance for economic policy planning in Mexico.

The Impact of democratization: a preliminary investigation on social policies and political violence in Latin America

The recent strides of democracy in Latin America have been associated to conflicting outcomes. The expectation that democracy would bring about peace and prosperity have been only partly satisfied. While political violence has been by and large eradicated from the sub-continent, poverty and social injustice still prevail and hold sway. Our study argues that democracy matters for inequality through the growing strength of center left and left parties and by making political leaders in general more responsive to the underprivileged. Furthermore, although the pension reforms recently enacted in the region generated overall regressive outcomes on income distribution, democratic countries still benefit from their political past: where democratic tradition was stronger, such outcomes have been milder. Democratic tradition and the specific ideological connotations of the parties in power, on the other hand, did not play an equally crucial role in securing lower levels of political violence: during the last wave of democratizations in Latin America, domestic peace was rather an outcome of political and social concessions to those in distress. In sum, together with other factors and especially economic ones, the reason why recent democratizations have provided domestic peace in most cases, but have been unable so far to solve the problem of poverty and inequality, is that democratic traditions in the subcontinent have been relatively weak and, more specifically, that this weakness has undermined the growth of left and progressive parties, acting as an obstacle to redistribution. Such weakness, on the other hand, has not prevented the drastic reduction of domestic political violence, since what mattered in this case was a combination of symbolic or material concessions and political agreements among powerful élites and counter-élites.

Guiding students through competence-based educational material

Student guidance is an always desired characteristic in any educational system, butit represents special difficulty if it has to be deployed in an automated way to fulfilsuch needs in a computer supported educational tool. In this paper we explorepossible avenues relying on machine learning techniques, to be included in a nearfuture -in the form of a tutoring navigational tool- in a teleeducation platform -InterMediActor- currently under development. Since no data from that platform isavailable yet, the preliminary experiments presented in this paper are builtinterpreting every subject in the Telecommunications Degree at Universidad CarlosIII de Madrid as an aggregated macro-competence (following the methodologicalconsiderations in InterMediActor), such that marks achieved by students can beused as data for the models, to be replaced in a near future by real data directlymeasured inside InterMediActor. We evaluate the predictability of students qualifications, and we deploy a preventive early detection system -failure alert-, toidentify those students more prone to fail a certain subject such that correctivemeans can be deployed with sufficient anticipation.

Preliminary report of the first season work of the International Pluridisciplinary Archaeological Expedition to Bactria 2008

This year the development of our project can be divided into two main clearly different parts, on one hand the laboratory work, where the sampled ceramic individuals has been prepared and analyzed and the elaboration of the data obtained during the excavation of 2007 has been finished and, on the other hand, the field work developed at the archaeological site during this specific year (2008).In the mark of the analytical work a significant number of ceramic individuals (144) from the different stratigraphical units from various areas of the excavation of Termez and Tchinguiz Tepe sampled duringthe new and previous field works has been archaeometrically characterized. This specific material includedindividuals dated into the Hellenistic and Sassanian period, which has been confirmed by C14dating upon organic samples.At the same time, in the mark of the field work of 2008 the archaeological record, already started tobe under study during the excavation of 2007, has been completed and two new archaeological recordshave been registered on of which is located in the area of Tchinguiz Tepe. For the archeological studythe information of the previous geophysical prospecting has been indisputably taken into considerationand the same methodology has been applied to crosscheck the latter archaeological results.

Preliminary report of the first season work of the International Pluridisciplinary Archaeological Expedition to Bactria 2008

This year the development of our project can be divided into two main clearly different parts, on one hand the laboratory work, where the sampled ceramic individuals has been prepared and analyzed and the elaboration of the data obtained during the excavation of 2007 has been finished and, on the other hand, the field work developed at the archaeological site during this specific year (2008).In the mark of the analytical work a significant number of ceramic individuals (144) from the different stratigraphical units from various areas of the excavation of Termez and Tchinguiz Tepe sampled duringthe new and previous field works has been archaeometrically characterized. This specific material includedindividuals dated into the Hellenistic and Sassanian period, which has been confirmed by C14dating upon organic samples.At the same time, in the mark of the field work of 2008 the archaeological record, already started tobe under study during the excavation of 2007, has been completed and two new archaeological recordshave been registered on of which is located in the area of Tchinguiz Tepe. For the archeological studythe information of the previous geophysical prospecting has been indisputably taken into considerationand the same methodology has been applied to crosscheck the latter archaeological results.

Statistical modeling of bowing control applied to violin sound synthesis

Excitation-continuous music instrument control patterns are often not explicitly represented in current sound synthesis techniques when applied to automatic performance. Both physical model-based and sample-based synthesis paradigmswould benefit from a flexible and accurate instrument control model, enabling the improvement of naturalness and realism. Wepresent a framework for modeling bowing control parameters inviolin performance. Nearly non-intrusive sensing techniques allow for accurate acquisition of relevant timbre-related bowing control parameter signals.We model the temporal contour of bow velocity, bow pressing force, and bow-bridge distance as sequences of short Bézier cubic curve segments. Considering different articulations, dynamics, and performance contexts, a number of note classes are defined. Contours of bowing parameters in a performance database are analyzed at note-level by following a predefined grammar that dictates characteristics of curve segment sequences for each of the classes in consideration. As a result, contour analysis of bowing parameters of each note yields an optimal representation vector that is sufficient for reconstructing original contours with significant fidelity. From the resulting representation vectors, we construct a statistical model based on Gaussian mixtures suitable for both the analysis and synthesis of bowing parameter contours. By using the estimated models, synthetic contours can be generated through a bow planning algorithm able to reproduce possible constraints caused by the finite length of the bow. Rendered contours are successfully used in two preliminary synthesis frameworks: digital waveguide-based bowed stringphysical modeling and sample-based spectral-domain synthesis.

Material flow accounting of Spain

Material throughput is a means of measuring the so-called social metabolism, or physical dimensions of a society’s consumption, and can be taken as an indirect and approximate indicator of sustainability. Material flow accounting can be used to test the dematerialisation hypothesis, the idea that technological progress causes a decrease in total material used (strong dematerialisation) or material used per monetary unit of output (weak dematerialisation). This paper sets out the results of a material flow analysis for Spain for the period from 1980 to 2000. The analysis reveals that neither strong nor weak dematerialisation took place during the period analysed. Although the population did not increase considerably, materials mobilised by the Spanish economy (DMI) increased by 85% in absolute terms, surpassing GDP growth. In addition, Spain became more dependent on external trade in physical terms. In fact, its imports are more than twice the amount of its exports in terms of weight.

Methodological note about the determination of key sectors in final energy consumption: a preliminary approach to the Spanish case

In this paper we analyze the determination of "key" sectors in the final energy consumption. We approach this issue from an input-output perspective and we design a methodology based on the elasticities of the demands of final energy consumption. As an exercise, we apply the proposed methodology to the Spanish economy. The analysis allows us to indicate the greater or lesser relevance of the different sectors in the consumption of final energy, pointing out which sectors deserve greater attention in the Spanish case and showing the implications for energy policy.

Material flow accounting of Mexico (1970-2003)

This technical background paper describes the methods applied and data sources used in the compilation of the 1980-2003 data set for material flow accounts of the Mexican economy and presents the data set. It is organised in four parts: the first part gives an overview of the Material Flow Accounting (MFA) methodology. The second part presents the main material flows of the Mexican economy including biomass, fossil fuels, metal ores, industrial minerals and, construction minerals. The aim of this part is to explain the procedures and methods followed, the data sources used as well as providing a brief evaluation of the quality and reliability of the information used and the accounts established. Finally, some conclusions will be provided.

Material Flow Accounting in Chile, Ecuador, Mexico and Peru (1980-2000)

In this paper we compare the resource flows of Chile, Ecuador, Mexico and Peru between 1980 and 2000. In this time span, the domestic extraction of materials increased in the four countries, mainly due to the mining sector in Chile and Peru, biomass and oil in Ecuador and construction minerals in Mexico. Imports and exports increased too, due to the increasing integration in the international markets, prompted by the liberalization policies undertaken by the four countries between the late 1970s and the late 1990s. The four countries had a negative physical trade balance for most of the period analyzed, meaning that their exports exceeded their imports in terms of weight. However, the increase of imports reduced the physical deficit in Chile, Mexico and Peru. Ecuador’s physical deficit was the highest and did not decrease in the period analyzed. Also, a diversification of exports away from bulk commodities could be observed in Chile and Mexico, and to a lesser extent in Peru, whereas in Ecuador the export sector remained mainly based on oil and biomass. More research is needed to explore the environmental effects of this phenomenon. Also, the indirect flows associated to the direct physical flows deserve to be subject to further analysis.

Fabricació de Lents Zonals de Fresnel per aplicació als raigs X tous

Estudi elaborat a partir d’una estada al Paul Scherrer Institut del Maig a l’Octubre del 2006 amb l’ajuda i supervisió dels Dr. Konstantins Jefimovs i Dr. Christian David. Focalitzar raigs X tous és una necessitat essencial per al microanàlisis, la microscopia, i fer imatges en moltes Instal·lacions de Radiació Sincrotró. Les Lents Zonals de Fresnel (FZP, de la denominació anglesa “Fresnel Zone Plates”) han demostrat donar uns punts focals amb una resolució espacial destacada i una baixa il·luminació de fons. Tanmateix, la fabricació de FZP és complexa i no totalment reproduïble. A més a més, el temps de vida de les FZP és força curt, ja que estant situades sobre membranes de nitrur de silici molt fines i altament absorbents. Per tant, hem fet esforços per implementar FZP de silici, que s’espera que siguin més resistents. L’element està fet d’una oblia de cristall de silici poc absorbent, i no presenta cap interfase entre materials. Així doncs, aquestes lents són especialment adequades per a aguantar les extremes càrregues de radiació de les fonts de raigs X més brillants. Particularment, això és molt important per a les aplicacions a les pròximes generacions de fonts de raigs X, com els Làsers d’Electrons Lliures (FEL, de la denominació anglesa “Free Electron Laser”). El silici també garanteix que no hi hagi cap banda d’absorció en el rang d’energies de la finestra de l’aigua (200-520 eV), fent aquestes lents ideals per a fer imatges de mostres biològiques. En aquest informe, hi ha una descripció detallada de tots els passos involucrats en la fabricació de les Lents Zonals de Fresnel de silici. En resum, les estructures de FZP es modelen sobre una resina utilitzant litografia per feix d’electrons i llavors el patró es transmet al silici mitjançant un gravat d’ions reactius (RIE, de la denominació anglesa ‘Reactive Ion Etching’) utilitzant una fina (20 nm) màscara de Crintermitja. Les membranes de silici es poden aprimar després de la fabricació de les estructures per a garantir una transmissió suficient fins i tot a baixes energies. Aquest informe també inclou l’anàlisi i la discussió d’alguns experiments preliminars per avaluar el rendiment de les Si FZPs fets a la línia de llum PolLux del Swiss Ligth Source amb l’ajuda dels Dr. Jörg Raabe i Dr. George Tzvetkov.