Two component systems: physiological effect of a third component

Signal transduction systems mediate the response and adaptation of organisms to environmental changes. In prokaryotes, this signal transduction is often done through Two Component Systems (TCS). These TCS are phosphotransfer protein cascades, and in their prototypical form they are composed by a kinase that senses the environmental signals (SK) and by a response regulator (RR) that regulates the cellular response. This basic motif can be modified by the addition of a third protein that interacts either with the SK or the RR in a way that could change the dynamic response of the TCS module. In this work we aim at understanding the effect of such an additional protein (which we call ‘‘third component’’) on the functional properties of a prototypical TCS. To do so we build mathematical models of TCS with alternative designs for their interaction with that third component. These mathematical models are analyzed in order to identify the differences in dynamic behavior inherent to each design, with respect to functionally relevant properties such as sensitivity to changes in either the parameter values or the molecular concentrations, temporal responsiveness, possibility of multiple steady states, or stochastic fluctuations in the system. The differences are then correlated to the physiological requirements that impinge on the functioning of the TCS. This analysis sheds light on both, the dynamic behavior of synthetically designed TCS, and the conditions under which natural selection might favor each of the designs. We find that a third component that modulates SK activity increases the parameter space where a bistable response of the TCS module to signals is possible, if SK is monofunctional, but decreases it when the SK is bifunctional. The presence of a third component that modulates RR activity decreases the parameter space where a bistable response of the TCS module to signals is possible.

Identifying quantitative operation principles in metabolic pathways: a systematic method for searching feasible enzyme activity patterns leading to cellular adaptive responses

Background: Optimization methods allow designing changes in a system so that specific goals are attained. These techniques are fundamental for metabolic engineering. However, they are not directly applicable for investigating the evolution of metabolic adaptation to environmental changes. Although biological systems have evolved by natural selection and result in well-adapted systems, we can hardly expect that actual metabolic processes are at the theoretical optimum that could result from an optimization analysis. More likely, natural systems are to be found in a feasible region compatible with global physiological requirements. Results: We first present a new method for globally optimizing nonlinear models of metabolic pathways that are based on the Generalized Mass Action (GMA) representation. The optimization task is posed as a nonconvex nonlinear programming (NLP) problem that is solved by an outer- approximation algorithm. This method relies on solving iteratively reduced NLP slave subproblems and mixed-integer linear programming (MILP) master problems that provide valid upper and lower bounds, respectively, on the global solution to the original NLP. The capabilities of this method are illustrated through its application to the anaerobic fermentation pathway in Saccharomyces cerevisiae. We next introduce a method to identify the feasibility parametric regions that allow a system to meet a set of physiological constraints that can be represented in mathematical terms through algebraic equations. This technique is based on applying the outer-approximation based algorithm iteratively over a reduced search space in order to identify regions that contain feasible solutions to the problem and discard others in which no feasible solution exists. As an example, we characterize the feasible enzyme activity changes that are compatible with an appropriate adaptive response of yeast Saccharomyces cerevisiae to heat shock Conclusion: Our results show the utility of the suggested approach for investigating the evolution of adaptive responses to environmental changes. The proposed method can be used in other important applications such as the evaluation of parameter changes that are compatible with health and disease states.

Minimization of biosynthetic costs in adaptive gene expression responses of yeast to environmental changes

Yeast successfully adapts to an environmental stress by altering physiology and fine-tuning metabolism. This fine-tuning is achieved through regulation of both gene expression and protein activity, and it is shaped by various physiological requirements. Such requirements impose a sustained evolutionary pressure that ultimately selects a specific gene expression profile, generating a suitable adaptive response to each environmental change. Although some of the requirements are stress specific, it is likely that others are common to various situations. We hypothesize that an evolutionary pressure for minimizing biosynthetic costs might have left signatures in the physicochemical properties of proteins whose gene expression is fine-tuned during adaptive responses. To test this hypothesis we analyze existing yeast transcriptomic data for such responses and investigate how several properties of proteins correlate to changes in gene expression. Our results reveal signatures that are consistent with a selective pressure for economy in protein synthesis during adaptive response of yeast to various types of stress. These signatures differentiate two groups of adaptive responses with respect to how cells manage expenditure in protein biosynthesis. In one group, significant trends towards downregulation of large proteins and upregulation of small ones are observed. In the other group we find no such trends. These results are consistent with resource limitation being important in the evolution of the first group of stress responses.

Biophysical requirements of power-supply systems: nuclear energy and fossil energy

The report presents a grammar capable of analyzing the process of production of electricity in modular elements for different power-supply systems, defined using semantic and formal categories. In this way it becomes possible to individuate similarities and differences in the process of production of electricity, and then measure and compare “apples” with “apples” and “oranges” with “oranges”. For instance, when comparing the various unit operations of the process of production of electricity with nuclear energy to the analogous unit operations of the process of production of fossil energy, we see that the various phases of the process are the same. The only difference is related to characteristics of the process associated with the generation of heat which are completely different in the two systems. As a matter of facts, the performance of the production of electricity from nuclear energy can be studied, by comparing the biophysical costs associated with the different unit operations taking place in nuclear and fossil power plants when generating process heat or net electricity. By adopting this approach, it becomes possible to compare the performance of the two power-supply systems by comparing their relative biophysical requirements for the phases that both nuclear energy power plants and fossil energy power plants have in common: (i) mining; (ii) refining/enriching; (iii) generating heat/electricity; (iv) handling the pollution/radioactive wastes. This report presents the evaluation of the biophysical requirements for the two powersupply systems: nuclear energy and fossil energy. In particular, the report focuses on the following requirements: (i) electricity; (ii) fossil-fuels, (iii) labor; and (iv) materials.

Straightening out the concept of direct and indirect input requirements

Gim & Kim (1998) proposed a generalization of Jeong (1982, 1984) reinterpretation of the Hawkins-Simon condition for macroeconomic stability to off-diagonal matrix elements. This generalization is conceptually relevant for it offers a complementary view of interindustry linkages beyond final or net output influence. The extension is completely similar to the 'total flow' idea introduced by Szyrmer (1992) or the 'output-to-output' multiplier of Miller & Blair (2009). However the practical implementation of Gim & Kim is actually faulty since it confuses the appropriate order of output normalization. We provide a new and elementary solution for the correct formalization using standard interindustry accounting concepts.

Abundància i persistència de Faecalibacteriun prausnitzii en la Malaltia de Crohn

Faecalibacterium prausnitzii és un del bacteris anaeròbis més abundants entre les espècies comensals del tracte intestinal humà sa. Aquesta espècie és una de les principals productores de butirat a l'intestí (que és la principal font d’energia per als colonòcits), però també s'ha suggerit que pot produir compostos antiinflamatoris i intervenir en la regulació de vàries rutes metabòliques de l’hoste. F. prausnitzii és un bacteri difícil de cultivar, ja que presenta una elevada sensibilitat a l'oxigen i presenta uns requeriments nutricionals molt exigents, el que ha compromès considerablement el nombre d’estudis basats en aïllats d’aquesta espècie. No obstant això, en els darrers anys l’interès en aquest bacteri està creixent ja que s’ha evidenciat que les poblacions de F. prausnitzii són variables en diferents grups d'edat i que es veuen reduïdes en certs trastorns intestinals com ara la malaltia inflamatòria intestinal i el càncer colorectal. L’objectiu d'aquest treball ha estat aprofundir en el rol que desenvolupa F. prausnitzii com un dels principals bacteris comensals del tracte intestinal humà. En primer lloc, s’ha dissenyat, optimitzat i validat un nou mètode molecular per determinar l’abundància d’aquesta espècie en mostres del tracte gastrointesinal, i s’ha demostrat la seva possible aplicació per ajudar al diagnòstic de la malaltia de Crohn. En segon lloc, s’ha dut a terme un estudi de les característiques filogenètiques i fenotípiques dels aïllats de F. Prausnitzii disponibles en l'actualitat a fi de coneixre’n millor la diversitat genètica i fenotípica i dilucidar quins factors són crucials en comprometre la població d’aquest bacteri en un intestí malalt. L’anàlisi de les soques ha revelat que F. prausnitzii inclou Principalment dos filogrups, nutricionalment versàtils i molt sensibles a canvis en les condicions ecològiques que pot patir l’intestí de l’hoste sota certes malalties intestinals. En conclusió, els resultat obtinguts en aquest estudi mostren que F. prausnitzii és una espècie ben establerta al còlon sa, amb una elvada versatilitat metabòlica ja que és capaç d’ interactuar amb carbohidrats de diferent estructura i complexitat. S’ha corroborat que aquest microorganisme seria un bon indicador de salut intestinal ja que la seva abundància es veu significativament reduida en pacients amb malaltia de Crohn. Aquests resultats concorden amb els obtinguts per proves fisiològiques que mostren una elevada sensibilitat de l’espècie a determinades condicions relacionades amb malalties intestinals. Estudis futurs s’orientaran a comprendre millor quins factros derrivats de la interacció amb l’hoste també determinen la persistència d’aquesta espècie en un intestí sa o malalt.

On the use of QoS requirements as base of multicast charging

We propose a charging scheme for cost distribution along a multicast tree when cost is the responsibility of the receivers. This scheme focuses on QoS considerations and it does not depend on any specific type of service. The scheme has been designed to be used as a bridge between unicast and multicast services, solving the problem of charging multicast services by means of unicast charging and existing QoS routing mechanisms. We also include a numerical comparison and discussions of the case of non-numerical or relative QoS and on the application to some service examples in order to give a better understanding of the proposal

Resource dimensioning aspect of heterogeneous traffic with different service requirements: Integration versus segregation

In this paper, we consider the ATM networks in which the virtual path concept is implemented. The question of how to multiplex two or more diverse traffic classes while providing different quality of service requirements is a very complicated open problem. Two distinct options are available: integration and segregation. In an integration approach all the traffic from different connections are multiplexed onto one VP. This implies that the most restrictive QOS requirements must be applied to all services. Therefore, link utilization will be decreased because unnecessarily stringent QOS is provided to all connections. With the segregation approach the problem can be much simplified if different types of traffic are separated by assigning a VP with dedicated resources (buffers and links). Therefore, resources may not be efficiently utilized because no sharing of bandwidth can take place across the VP. The probability that the bandwidth required by the accepted connections exceeds the capacity of the link is evaluated with the probability of congestion (PC). Since the PC can be expressed as the CLP, we shall simply carry out bandwidth allocation using the PC. We first focus on the influence of some parameters (CLP, bit rate and burstiness) on the capacity required by a VP supporting a single traffic class using the new convolution approach. Numerical results are presented both to compare the required capacity and to observe which conditions under each approach are preferred

On optimal location with treshold requirements

The optimal location of services is one of the most important factors that affects service quality in terms of consumer access. On theother hand, services in general need to have a minimum catchment area so as to be efficient. In this paper a model is presented that locates the maximum number of services that can coexist in a given region without having losses, taking into account that they need a minimum catchment area to exist. The objective is to minimize average distance to the population. The formulation presented belongs to the class of discrete P--median--like models. A tabu heuristic method is presented to solve the problem. Finally, the model is applied to the location of pharmacies in a rural region of Spain.

Anàlisi i quantificació de les accions i el temps de joc en l'hoquei sobre patins en equips de l'OK Lliga

Quantificar les variables temporal, les accions tècniques i els desplaçaments dels jugador al llarg de la competició proporciona una informació excel·lent per deduir les càrregues físiques i fisiològiques a les que estan sotmesos. Per aquest estudi es van visualitzar 4 partits de la Copa del Rei 2012. Es va enregistrà sistemàticament les dades en fulls de registre. Les principals dades analitzades van ser: temps total, temps real, temps de pausa, temps d’acció i relació entre el temps d’acció i el temps de pausa (densitat de treball). També es va analitzar: les incidències reglamentaries, les accions tècniques del jugador i els desplaçaments del jugador. El 45% de les accions es van produir entre 0 i 30s, i el promig d’interval de participació va ser 19:29s ±2:09. Més del 50% de les pauses es van produir entre 11s i 30s, i el promig d’interval de pausa va ser de 24:57s. Aquest va determinar que la densitat de treball era 1:1.3. Aproximadament el 70% de les incidències reglamentàries van ser faltes d’equip I tècniques. Van haver-hi 56 conduccions, 10 driblins, 12 remats, (3 xuts, 2 punxades/escopides, 5 remats de primeres i 2 arrossegades) i 80 passades. Finalment, en un partit el 42,23% dels desplaçaments van ser a baixa intensitat, el 27,02% van ser a intensitat mitjana i el 30,75% van ser a alta intensitat. A més a més, el 81,90% dels desplaçaments a alta intensitat van durar de 0s a 5s, el 54,56% a intensitat mitjana van durar de 6 a 10 s. I el 49,32% a intensitat baixa també van durar 6s a 10s. L’hoquei sobre patins és un esport en el que hi predominen els esforços intermitents a gran intensitat i de curta durada amb una important sol·licitació de la via anaeròbica alàctica. Analitzar la dimensió temporal, les accions tècniques i els desplaçaments dels jugador durant la competició permet estimar les exigències físiques i requeriments energètics, i aquest faciliten l’elaboració d’entrenaments més específics.

Minimal requirements for parameters to be used for the development of predictive models for microbial source tracking. The example of the pair somatic coliphages and phages infecting Bacteroides

Several methods and approaches for measuring parameters to determine fecal sources of pollution in water have been developed in recent years. No single microbial or chemical parameter has proved sufficient to determine the source of fecal pollution. Combinations of parameters involving at least one discriminating indicator and one universal fecal indicator offer the most promising solutions for qualitative and quantitative analyses. The universal (nondiscriminating) fecal indicator provides quantitative information regarding the fecal load. The discriminating indicator contributes to the identification of a specific source. The relative values of the parameters derived from both kinds of indicators could provide information regarding the contribution to the total fecal load from each origin. It is also essential that both parameters characteristically persist in the environment for similar periods. Numerical analysis, such as inductive learning methods, could be used to select the most suitable and the lowest number of parameters to develop predictive models. These combinations of parameters provide information on factors affecting the models, such as dilution, specific types of animal source, persistence of microbial tracers, and complex mixtures from different sources. The combined use of the enumeration of somatic coliphages and the enumeration of Bacteroides-phages using different host specific strains (one from humans and another from pigs), both selected using the suggested approach, provides a feasible model for quantitative and qualitative analyses of fecal source identification.

Installation Information requirements in the GPLv3 and LGPLv3

One of the major changes introduced in the GPLv3 and LGPLv3 is the clause preventing "tivoisation". Richard Stallman defines Tivoisation as "the practice of designing hardware so that a modified version cannot function properly". In this presentation we will go through the reasons of why the information installation requirement was introduced, how you can comply with this requirement and why you may want to think about it now rather than later.

Use of physiological constraints to identify quantitative design principles for gene expression in yeast adaptation to heat shock

Background: Understanding the relationship between gene expression changes, enzyme activity shifts, and the corresponding physiological adaptive response of organisms to environmental cues is crucial in explaining how cells cope with stress. For example, adaptation of yeast to heat shock involves a characteristic profile of changes to the expression levels of genes coding for enzymes of the glycolytic pathway and some of its branches. The experimental determination of changes in gene expression profiles provides a descriptive picture of the adaptive response to stress. However, it does not explain why a particular profile is selected for any given response. Results: We used mathematical models and analysis of in silico gene expression profiles (GEPs) to understand how changes in gene expression correlate to an efficient response of yeast cells to heat shock. An exhaustive set of GEPs, matched with the corresponding set of enzyme activities, was simulated and analyzed. The effectiveness of each profile in the response to heat shock was evaluated according to relevant physiological and functional criteria. The small subset of GEPs that lead to effective physiological responses after heat shock was identified as the result of the tuning of several evolutionary criteria. The experimentally observed transcriptional changes in response to heat shock belong to this set and can be explained by quantitative design principles at the physiological level that ultimately constrain changes in gene expression. Conclusion: Our theoretical approach suggests a method for understanding the combined effect of changes in the expression of multiple genes on the activity of metabolic pathways, and consequently on the adaptation of cellular metabolism to heat shock. This method identifies quantitative design principles that facilitate understating the response of the cell to stress.

Use of a pre-sidedress soil nitrate test (PSNT) to determine nitrogen fertilizer requirements for irrigated corn

In the present study, a 2-year N rate response experiment was conducted in different fields to monitor NO3-N soil profiles, N accumulation by the crop and final crop performance, in order to assess if soil NO3-N at pre-sidedressing (Pre-Sidedress Soil Nitrate Test, PSNT) is a reliable indicator for soil N availability for corn in the irrigated area served by canal d’Urgell (Lleida, Spain), and if the test can be used to separate responsive fields from non-responsive fields to sidedress N fertilizer applications. Preliminary soil N availability (N sidedress fertilizer rate + PSNT) critical levels to identify fields that need supplementary N fertilizer applications were established at ca. 300 and 210 kg NO3-N·ha–1, for PSNTrooting–zone and PSNT0–30 cm, respectively (for a yield goal of 14 t grain·ha–1).

Drought tolerance and light requirements of high and low sublittoral species of Mediterranean macroalgae of the genus Cystoseira C. Agardh (Fucales, Phaeophyceae)

Article sobre la tolerància a la sequera i les necessitats de llum d'espècies de l'alt i baix sublitoral de macroalgues de la Mediterrània del gènere Cystoseira C. Agardh (Fucales, Phaeophyceae)