Why are slip lengths so large in carbon nanotubes?

The enhanced flow in carbon nanotubes is explained using a mathematical model that includes a depletion layer with reduced viscosity near the wall. In the limit of large tubes the model predicts no noticeable enhancement. For smaller tubes the model predicts enhancement that increases as the radius decreases. An analogy between the reduced viscosity and slip-length models shows that the term slip-length is misleading and that on surfaces which are smooth at the nanoscale it may be thought of as a length-scale associated with the size of the depletion region and viscosity ratio. The model therefore provides a physical interpretation of the classical Navier slip condition and explains why `slip-lengths' may be greater than the tube radius.

Study of chemical modification of alkaline lignin by the glyoxalation reaction

In this study, glyoxalated alkaline lignins with a non-volatile and non-toxic aldehyde, which can be obtained from several natural resources, namely glyoxal, were prepared and characterized for its use in wood adhesives. The preparation method consisted of the reaction of lignin with glyoxal under an alkaline medium. The influence of reaction conditions such as the molar ratio of sodium hydroxide-to-lignin and reaction time were studied relative to the properties of the prepared adducts. The analytical techniques used were FTIR and 1H-NMR spectroscopies, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Results from both the FTIR and 1H-NMR spectroscopies showed that the amount of introduced aliphatic hydroxyl groups onto the lignin molecule increased with increasing reaction time and reached a maximum value at 10 h, and after they began to decrease. The molecular weights remained unchanged until 10 h of reaction time, and then started to increase, possibly due to the repolymerization reactions. DSC analysis showed that the glass transition temperature (Tg) decreased with the introduction of glyoxal onto the lignin molecule due to the increase in free volume of the lignin molecules. TGA analysis showed that the thermal stability of glyoxalated lignin is not influenced and remained suitable for wood adhesives. Compared to the original lignin, the improved lignin is reactive and a suitable raw material for adhesive formula

Characterization of alkaline lignins for use in penol-formaldehyde and epoxy resins

Besides polyurethanes and polyesters, phenolic and epoxy resins are the most prominent applications for technical lignins in thermosetting materials. To evaluate the potential application of lignin raw materials in phenol formaldehyde and epoxy resins, three types of alkaline lignins were characterized in terms of their structures and thermal properties. The lignin samples analyzed were kraft lignin (LIG-1), soda–rice straw lignin (LIG-2), and soda-wheat straw lignin (LIG-3). FTIR and 1H-NMR methods were used to determine their structure. Gel permeation chromatography (GPC) was used to determine the molecular weight distribution (MWD). Differential scanning calorimetry (DSC) was used to measure the glass transition temperature (Tg), and thermogravimetric analysis (TGA) to determine the thermal stability of lignin samples. Results showed that kraft lignin (LIG-1) has moderate hydroxyl-group content, is rich in G-type units, and has good thermal stability. These properties make it more suitable for direct use in phenol formaldehyde resins, and it is therefore a good raw material for this purpose. The alkaline soda-rice straw lignin (LIG-2) with a high hydroxyl-group content and excellent thermal stability is most suited to preparing lignin-based epoxy resin

Distributed all-atom simulations of intrinsically unstructured proteins

The Computational Biophysics Group at the Universitat Pompeu Fabra (GRIB-UPF) hosts two unique computational resources dedicated to the execution of large scale molecular dynamics (MD) simulations: (a) the ACMD molecular-dynamics software, used on standard personal computers with graphical processing units (GPUs); and (b) the GPUGRID. net computing network, supported by users distributed worldwide that volunteer GPUs for biomedical research. We leveraged these resources and developed studies, protocols and open-source software to elucidate energetics and pathways of a number of biomolecular systems, with a special focus on flexible proteins with many degrees of freedom. First, we characterized ion permeation through the bactericidal model protein Gramicidin A conducting one of the largest studies to date with the steered MD biasing methodology. Next, we addressed an open problem in structural biology, the determination of drug-protein association kinetics; we reconstructed the binding free energy, association, and dissaciociation rates of a drug like model system through a spatial decomposition and a Makov-chain analysis. The work was published in the Proceedings of the National Academy of Sciences and become one of the few landmark papers elucidating a ligand-binding pathway. Furthermore, we investigated the unstructured Kinase Inducible Domain (KID), a 28-peptide central to signalling and transcriptional response; the kinetics of this challenging system was modelled with a Markovian approach in collaboration with Frank Noe’s group at the Freie University of Berlin. The impact of the funding includes three peer-reviewed publication on high-impact journals; three more papers under review; four MD analysis components, released as open-source software; MD protocols; didactic material, and code for the hosting group.

Ultrastructural data on the life cycle of the parasite, Perkinsus atlanticus (Apicomplexa), on the clam, Ruditapes phillipinarum, in the Mediterranean

An Apicomplexan Perkinsus species has been found parasitizing the clam Ruditapes philippinarum (= Tapes semidecussatus) collected on the Mediterranean coast in the region of the Ebro Delta (Tarragona, Spain). Light and transmission electron microscopy were used to study different stages of this parasite during zoosporulation induced by incubation in thioglycollate medium and seawater. During incubation the trophozoites began zoosporulation, which originated prezoosporangia and zoosporangia at different developmental stages. Successive cytokinesis and nucleokinesis gave rise to prezoospores, which became elongate and differentiated in biflagellated zoospores. The latter presented large mitochondria and an apical complex formed by a conoid, polar ring, micronemes, rhophtries and subpellicular microtubules. The zoosporangium wall showed some typical lamosomes and a discharge tube developed in early phases of incubation. Ultrastructural data were compared with the only four species of the genus Perkinsus previously described. The morphological data, the host and the geographic proximity suggest that the species located on the Mediterranean coast was Perkinsus atlanticus.

Effect of expiratory flow limitation on respiratory mechanical impedance: a model study

Large phasic variations of respiratory mechanical impedance (Zrs) have been observed during induced expiratory flow limitation (EFL) (M. Vassiliou, R. Peslin, C. Saunier, and C. Duvivier. Eur. Respir. J. 9: 779-786, 1996). To clarify the meaning of Zrs during EFL, we have measured from 5 to 30 Hz the input impedance (Zin) of mechanical analogues of the respiratory system, including flow-limiting elements (FLE) made of easily collapsible rubber tubing. The pressures upstream (Pus) and downstream (Pds) from the FLE were controlled and systematically varied. Maximal flow (Vmax) increased linearly with Pus, was close to the value predicted from wave-speed theory, and was obtained for Pus-Pds of 4-6 hPa. The real part of Zin started increasing abruptly with flow (V) >85%Vmax and either further increased or suddenly decreased in the vicinity of V¿max. The imaginary part of Zin decreased markedly and suddenly above 95%Vmax. Similar variations of Zin during EFL were seen with an analogue that mimicked the changes of airway transmural pressure during breathing. After pressure andV measurements upstream and downstream from the FLE were combined, the latter was analyzed in terms of a serial (Zs) and a shunt (Zp) compartment. Zs was consistent with a large resistance and inertance, and Zp with a mainly elastic element having an elastance close to that of the tube walls. We conclude that Zrs data during EFL mainly reflect the properties of the FLE.

Elaboración de un video sobre calidad, seguridad y medio ambiente en la Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia de la Universidad de Barcelona

La Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia (UB) ha implantado un sistema de gestión de la calidad (SGC) que permite transmitir al estudiante una formación adicional con el objetivo de mejorar sus competencias transversales (siguiendo las directrices del Espacio Europeo de Educación Superior, EEES). Además, en el curso académico 06-07, se instauraron las Buenas Prácticas Ambientales (BPAL) para disponer de un sistema de gestión que incorporase los criterios de calidad, medioambiente y seguridad (sistema de gestión integrada, SGI). Durante el presente curso académico se ha procedido a la grabación y edición de un video sobre calidad, seguridad y medioambiente en la ULD con el objetivo de mejorar la formación transversal de los estudiantes facilitando la integración de los conocimientos y habilidades profesionales. De esta forma, al salir del entorno universitario, los licenciados y graduados de la Facultad de Farmacia dispondrán de un valor añadido en su formación, mejorando así sus competencias para el desarrollo de su futura profesión. En el video se muestra la manera de trabajar correctamente según las normas de calidad, seguridad y medioambiente recogidas además en un tríptico que se entrega a los estudiantes al acceder por primera vez a un laboratorio de prácticas. El video se difundirá a través de la página web de la ULD, de la videoteca de la UB, del canal You Tube Canal UB, así como de las asignaturas que lo soliciten (sirviendo de soporte para el personal docente).

Helium in polygonal nanopores at zero temperature: Density functional theory calculations

We investigate adsorption of helium in nanoscopic polygonal pores at zero temperature using a finite-range density functional theory. The adsorption potential is computed by means of a technique denoted as the elementary source method. We analyze a rhombic pore with Cs walls, where we show the existence of multiple interfacial configurations at some linear densities, which correspond to metastable states. Shape transitions and hysterectic loops appear in patterns which are richer and more complex than in a cylindrical tube with the same transverse area.

Model for curvature-driven pearling instability in membranes

A phase-field model for dealing with dynamic instabilities in membranes is presented. We use it to study curvature-driven pearling instability in vesicles induced by the anchorage of amphiphilic polymers on the membrane. Within this model, we obtain the morphological changes reported in recent experiments. The formation of a homogeneous pearled structure is achieved by consequent pearling of an initial cylindrical tube from the tip. For high enough concentration of anchors, we show theoretically that the homogeneous pearled shape is energetically less favorable than an inhomogeneous one, with a large sphere connected to an array of smaller spheres.

Polymer-induced tubulation in lipid vesicles

A mechanism of extraction of tubular membranes from a lipid vesicle is presented. A concentration gradient of anchoring amphiphilic polymers generates tubes from budlike vesicle protrusions. We explain this mechanism in the framework of the Canham-Helfrich model. The energy profile is analytically calculated and a tube with a fixed length, corresponding to an energy minimum, is obtained in a certain regime of parameters. Further, using a phase-field model, we corroborate these results numerically. We obtain the growth of tubes when a polymer source is added, and the budlike shape after removal of the polymer source, in accordance with recent experimental results.

Parity violation in Aharonov-Bohm systems: The spontaneous Hall effect

We show how macroscopic manifestations of P (and T) symmetry breaking can arise in a simple system subject to Aharonov-Bohm interactions. Specifically, we study the conductivity of a gas of charged particles moving through a dilute array of flux tubes. The interaction of the electrons with the flux tubes is taken to be of a purely Aharonov-Bohm type. We find that the system exhibits a nonzero transverse conductivity, i.e., a spontaneous Hall effect. This is in contrast to the fact that the cross sections for both scattering and bremsstrahlung (soft-photon emission) of a single electron from a flux tube are invariant under reflections. We argue that the asymmetry in the conductivity coefficients arises from many-body effects. On the other hand, the transverse conductivity has the same dependence on universal constants that appears in the quantum Hall effect, a result that we relate to the validity of the mean-field approximation.

Elaboración de un video sobre calidad, seguridad y medio ambiente en la Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia de la Universidad de Barcelona

La Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia (UB) ha implantado un sistema de gestión de la calidad (SGC) que permite transmitir al estudiante una formación adicional con el objetivo de mejorar sus competencias transversales (siguiendo las directrices del Espacio Europeo de Educación Superior, EEES). Además, en el curso académico 06-07, se instauraron las Buenas Prácticas Ambientales (BPAL) para disponer de un sistema de gestión que incorporase los criterios de calidad, medioambiente y seguridad (sistema de gestión integrada, SGI). Durante el presente curso académico se ha procedido a la grabación y edición de un video sobre calidad, seguridad y medioambiente en la ULD con el objetivo de mejorar la formación transversal de los estudiantes facilitando la integración de los conocimientos y habilidades profesionales. De esta forma, al salir del entorno universitario, los licenciados y graduados de la Facultad de Farmacia dispondrán de un valor añadido en su formación, mejorando así sus competencias para el desarrollo de su futura profesión. En el video se muestra la manera de trabajar correctamente según las normas de calidad, seguridad y medioambiente recogidas además en un tríptico que se entrega a los estudiantes al acceder por primera vez a un laboratorio de prácticas. El video se difundirá a través de la página web de la ULD, de la videoteca de la UB, del canal You Tube Canal UB, así como de las asignaturas que lo soliciten (sirviendo de soporte para el personal docente).

In rats, oral oleoyl-DHEA is rapidly hydrolysed and converted to DHEA-sulphate

Background: Dehydroepiandrosterone (DHEA) released by adrenal glands may be converted to androgens and estrogens mainly in the gonadal, adipose, mammary, hepatic and nervous tissue. DHEA is also a key neurosteroid and has antiglucocorticoid activity. DHEA has been used for the treatment of a number of diseases, including obesity; its pharmacological effects depend on large oral doses, which effect rapidly wanes in part because of its short half-life in plasma. Since steroid hormone esters circulate for longer periods, we have studied here whether the administration of DHEA oleoyl ester may extend its pharmacologic availability by keeping high circulating levels. Results: Tritium-labelled oleoyl-DHEA was given to Wistar male and female rats by gastric tube. The kinetics of appearance of the label in plasma was unrelated to sex; the pattern being largely coincident with the levels of DHEA-sulfate only in females, and after 2 h undistinguishable from the results obtained using labelled DHEA gavages; in the short term, practically no lipophilic DHEA label was found in plasma. After 24 h only a small fraction of the label remained in the rat organs, with a different sex-related distribution pattern coincident for oleoyl- and free- DHEA gavages. The rapid conversion of oleoyl-DHEA into circulating DHEA-sulfate was investigated using stomach, liver and intestine homogenates; which hydrolysed oleoyl-DHEA optimally near pH 8. Duodenum and ileum contained the highest esterase activities. Pure hog pancreas cholesterol-esterase broke down oleoyl-DHEA at rates similar to those of oleoyl-cholesterol. The intestinal and liver esterases were differently activated by taurocholate and showed different pH-activity patterns than cholesterol esterase, suggesting that oleoyl-DHEA can be hydrolysed by a number of esterases in the lumen (e.g. cholesterol-esterase), in the intestinal wall and the liver. Conclusion: The esterase activities found may condition the pharmacological availability (and depot effect) of orally administered steroid hormone fatty acid esters such as oleoyl-DHEA. The oral administration of oleoyl-DHEA in order to extend DHEA plasma availability has not been proved effective, since the ester is rapidly hydrolysed, probably in the intestine itself, and mainly converted to DHEA-sulfate at least in females.

Elaboración de un video sobre calidad, seguridad y medio ambiente en la Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia de la Universidad de Barcelona

La Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia (UB) ha implantado un sistema de gestión de la calidad (SGC) que permite transmitir al estudiante una formación adicional con el objetivo de mejorar sus competencias transversales (siguiendo las directrices del Espacio Europeo de Educación Superior, EEES). Además, en el curso académico 06-07, se instauraron las Buenas Prácticas Ambientales (BPAL) para disponer de un sistema de gestión que incorporase los criterios de calidad, medioambiente y seguridad (sistema de gestión integrada, SGI). Durante el presente curso académico se ha procedido a la grabación y edición de un video sobre calidad, seguridad y medioambiente en la ULD con el objetivo de mejorar la formación transversal de los estudiantes facilitando la integración de los conocimientos y habilidades profesionales. De esta forma, al salir del entorno universitario, los licenciados y graduados de la Facultad de Farmacia dispondrán de un valor añadido en su formación, mejorando así sus competencias para el desarrollo de su futura profesión. En el video se muestra la manera de trabajar correctamente según las normas de calidad, seguridad y medioambiente recogidas además en un tríptico que se entrega a los estudiantes al acceder por primera vez a un laboratorio de prácticas. El video se difundirá a través de la página web de la ULD, de la videoteca de la UB, del canal You Tube Canal UB, así como de las asignaturas que lo soliciten (sirviendo de soporte para el personal docente).

Spore germination and development of young mycelia in some Rhizopogon species

Spore germination in Rhizopogon abietis, R. luteolus, R. roseolus and R. villosulus was induced in the presence of Rhodotorula glutinis and activated charcoal, in agar medium (N6:5). In one R. roseolus sample, 51% of spores germinated within 35 days, allowing observation of the course of spore germination and the different developmental patterns of homokaryotic mycelia. In these plates, spores showed two times of germination. The spores that germinated early produced an apical germ tube. Later other spores germinated in proximity to young mycelium, by forming a germ vesicle. One of the hyphal growth patterns obtained (interruption-swelling-ramification) is similar to that reported for other fungi. With this technique for inducing spore germination, it is possible to obtain enough monosporic cultures to perform mating tests. Key words: Basidiomycotina, Hypogeous, Monosporic Cultures.