Nano-electro-mechanical in dynamical cellular processes

Report for the scientific sojourn carried out at the Department of Structure and Constituents of Matter during 2007.The main focus of the work was on phenomena related to nano-electromechanical processes that take place on a cellular level. Additionally, it has also been performed independent work related to charge and energy transfer in bio molecules, energy transfer in coupled spin systems as well as electrodynamics of nonlinear metamaterials.

Residual thermomechanical stresses in thinned-chip assemblies

A new technology for the three-dimensional (3-D) stacking of very thin chips on a substrate is currently under development within the ultrathin chip stacking (UTCS) Esprit Project 24910. In this work, we present the first-level UTCS structure and the analysis of the thermomechanical stresses produced by the manufacturing process. Chips are thinned up to 10 or 15 m. We discuss potentially critical points at the edges of the chips, the suppression of delamination problems of the peripheral dielectric matrix and produce a comparative study of several technological choices for the design of metallic interconnect structures. The purpose of these calculations is to give inputs for the definition of design rules for this technology. We have therefore undertaken a programme that analyzes the influence of sundry design parameters and alternative development options. Numerical analyses are based on the finite element method.

Investigations on doping of amorphous and nano-crystalline silicon films deposited by catalytic chemical vapour deposition

Hydrogenated amorphous and nanocrystalline silicon, deposited by catalytic chemical vapour deposition, have been doped during deposition by the addition of diborane and phosphine in the feed gas, with concentrations in the region of 1%. The crystalline fraction, dopant concentration and electrical properties of the films are studied. The nanocrystalline films exhibited a high doping efficiency, both for n and p doping, and electrical characteristics similar to those of plasma-deposited films. The doping efficiency of n-type amorphous silicon is similar to that obtained for plasma-deposited electronic-grade amorphous silicon, whereas p-type layers show a doping efficiency of one order of magnitude lower. A higher deposition temperature of 450°C was required to achieve p-type films with electrical characteristics similar to those of plasma-deposited films.

Characterization of nano-oxide layers fabricated by ion beam oxidation

In this paper, a remote O2 ion source is used for the formation of nano-oxide layers. The oxidation efficiency was measured in CoFe-oxide films, and a decrease of the oxide layer with the pan angle and the oxidation pressure is observed. For the same oxidation pressure, the oxidation efficiency depends on the O2 content in the Ar-O2 plasma. These results were applied in optimizing the fabrication of Al2O3 barrier for tunnel junctions. This method was also used to fabricate junctions with Fe-oxide layers inserted at the Al2O3-CoFe interface. TEM and magnetization data indicate that after anneal at 385°C, a homogeneous ferromagnetic Fe-oxide layer (Fe3O4?) is formed.

Depinning transition of dislocation assemblies: Pileups and low-angle grain boundaries

We investigate the depinning transition occurring in dislocation assemblies. In particular, we consider the cases of regularly spaced pileups and low-angle grain boundaries interacting with a disordered stress landscape provided by solute atoms, or by other immobile dislocations present in nonactive slip systems. Using linear elasticity, we compute the stress originated by small deformations of these assemblies and the corresponding energy cost in two and three dimensions. Contrary to the case of isolated dislocation lines, which are usually approximated as elastic strings with an effective line tension, the deformations of a dislocation assembly cannot be described by local elastic interactions with a constant tension or stiffness. A nonlocal elastic kernel results as a consequence of long-range interactions between dislocations. In light of this result, we revise statistical depinning theories of dislocation assemblies and compare the theoretical results with numerical simulations and experimental data.

Bicelles: new nano systems for skin applications

Bicellar systems are lipid nanostructures formed by long- and short-chained phospholipids dispersed in aqueoussolution. Because of their attractive combination of lipid composition, small size and morphological versatility, bicellesbecame new targets for skin research. Bicelles modify the skin biophysical parameters and modulate the skin barrier function acting as enhancers for drug penetration. Moreover, these aggregates have the ability to penetrate through the narrowintercellular spaces of the skin stratum corneum and to reinforce its lipid lamellae. Their structures allows for the incorporation of different molecules that can be carried through the skin layers. Theremarkable versatility of bicelles is their most important characteristic, which makes it possible their use in different fields.These aggregates represent new nanosystems for skin applications. In this work we provide an overview of the main properties ofbicelles and their effects on the skin.

Hot wire configuration for depositing device grade nano-crystalline silicon at high deposition rate

The University of Barcelona is developing a pilot-scale hot wire chemical vapor deposition (HW-CVD) set up for the deposition of nano-crystalline silicon (nc-Si:H) on 10 cm × 10 cm glass substrate at high deposition rate. The system manages 12 thin wires of 0.15-0.2 mm diameter in a very dense configuration. This permits depositing very uniform films, with inhomogeneities lower than 2.5%, at high deposition rate (1.5-3 nm/s), and maintaining the substrate temperature relatively low (250 °C). The wire configuration design, based on radicals' diffusion simulation, is exposed and the predicted homogeneity is validated with optical transmission scanning measurements of the deposited samples. Different deposition series were carried out by varying the substrate temperature, the silane to hydrogen dilution and the deposition pressure. By means of Fourier transform infrared spectroscopy (FTIR), the evolution in time of the nc-Si:H vibrational modes was monitored. Particular importance has been given to the study of the material stability against post-deposition oxidation.

BioSuper: A web tool for the superimposition of biomolecules and assemblies with rotational symmetry

Background Most of the proteins in the Protein Data Bank (PDB) are oligomeric complexes consisting of two or more subunits that associate by rotational or helical symmetries. Despite the myriad of superimposition tools in the literature, we could not find any able to account for rotational symmetry and display the graphical results in the web browser. Results BioSuper is a free web server that superimposes and calculates the root mean square deviation (RMSD) of protein complexes displaying rotational symmetry. To the best of our knowledge, BioSuper is the first tool of its kind that provides immediate interactive visualization of the graphical results in the browser, biomolecule generator capabilities, different levels of atom selection, sequence-dependent and structure-based superimposition types, and is the only web tool that takes into account the equivalence of atoms in side chains displaying symmetry ambiguity. BioSuper uses ICM program functionality as a core for the superimpositions and displays the results as text, HTML tables and 3D interactive molecular objects that can be visualized in the browser or in Android and iOS platforms with a free plugin. Conclusions BioSuper is a fast and functional tool that allows for pairwise superimposition of proteins and assemblies displaying rotational symmetry. The web server was created after our own frustration when attempting to superimpose flexible oligomers. We strongly believe that its user-friendly and functional design will be of great interest for structural and computational biologists who need to superimpose oligomeric proteins (or any protein). BioSuper web server is freely available to all users at http://ablab.ucsd.edu/BioSuper webcite.

The Disadvantage of winning an election

This paper analyzes the problem that an incumbent faces during the legislature when deciding how to react to popular initiatives or policy proposals coming from different sources. We argue that this potential source of electoral disadvantage that the incumbent obtains after being elected can jeopardize the reelection possibilities of the incumbent. We analyze the decision of the incumbent when facing reelection and we characterize the conditions under which the advantages that the incumbent obtains can overcome the disadvantages. Finally, we use the results of this analysis to discuss some implications of the use of mechanisms of direct democracy like referenda and popular assemblies on electoral competition.

Estudi per la implantació de un ERP en una empresa de muntatges elèctrics

Aquest projecte presenta un estudi per a la implantació d’un Enterprise Resource Planning (ERP) en una empresa de muntatges elèctrics. Per a això es mostra una primera part teòrica on es dóna a conèixer tot el que comporta el terme ERP i el seu procés d'implantació. A continuació s'estudien els requeriments i necessitats de l'empresa objecte de l'estudi. Per a finalitzar, s'estudien tres solucions existents el mercat actual de ERP’s i es selecciona la que millor s'adapta a les necessitats i requeriments en vistes a una hipotètica implantació.

Disseny d’un sistema d’entrenament per l’escalada

El projecte proposa un sistema d’entrenament per l’escalada, donant noves solucions adaptades a les noves tendències socials i de mercat. La millora en la comunicació usuari-producte i el seguiment del progrés en l’entrenament són les bases d’aquest projecte, entorn a les quals giren totes les solucions plantejades. Donat l’increment exponencial dels usuaris de sales d’entrenament i aficionats a l’escalada en els últims deu anys, on m’incloc, aquest projecte pretén donar una nova visió més real de l’entrenament, plantejant un producte versàtil i canviant, el qual s’adequa a les necessitats concretes de cada usuari, a l’hora que proposa diferents muntatges segons les possibilitats de l’espai d’instal·lació. L’interès personal per l’escalada i l’experiència durants els últims anys en sales d’entrenament m’han fet plantejar-me la funció de diferents elements dins d’aquests espais. L’ús de noves tecnologies i de sistemes de programació específics donen a l’usuari l’oportunitat d’endinsar-se en tota una experiència diferent d’entrenament, on pot dissenyar el seu propi pla, tenir un seguiment estadístic de la seva evolució i ser partícip d’una xarxa social de contactes, recomanacions, actualitzacions d’exercicis i plantejament de nous reptes. Naixent les sales d’entrenament a la dècada dels seixanta, avui dia són més de 40 les empreses dedicades a la producció i fabricació de material per elles. Només un 11% inverteixen en innovació i disseny i, tot i així, els resultats, en la majoria dels casos, no es desmarquen gaire d’allò que ja existeix. Amb aquest projecte es vol obrir un nou paradigma en el sector, donar la volta a allò existent i mostrar que fent un bon estudi de necessitats es poden plantejar solucions molt més reals, adaptables i personalitzables.

Synthesis, structural order and magnetic behavior of self-assembled epsilon-Co nanocrystal arrays

The synthesis of magnetic nanoparticles with monodispere size distributions, their self assembly into ordered arrays and their magnetic behavior as a function of structural order (ferrofluids and 2D assemblies) are presented. Magnetic colloids of monodispersed, passivated, cobalt nanocrystals were produced by the rapid pyrolysis of cobalt carbonyl in solution. The size, size distribution (std. dev.< 5%) and the shape of the nanocrystals were controlled by varying the surfactant, its concentration, the reaction rate and the reaction temperature. The Co particles are defect-free single crystals with a complex cubic structure related to the beta phase of manganese (epsilon-Co). In the 2D assembly, a collective behavior was observed in the low-field susceptibility measurements where the magnetization of the zero field cooled process increases steadily and the magnetization of the field cooling process is independent the temperature. This was different from the observed behavior in a sample comprised of disordered interacting particles. A strong paramagnetic contribution appears at very low temperatures where the magnetization increases drastically after field cooling the sample. This has been attributed to the Co surfactant-particle interface since no magnetic atomic impurities are present in these samples.

Colloidal assembly on magnetically vibrated stripes

We investigate the collective organization of paramagnetic colloidal particles externally driven above the periodic stripes of a uniaxial ferrimagnetic garnet film. An external field modulation induces vibration of the stripe walls and produces random motion of the particles. Defects in the stripe pattern break the symmetry of the potential and favor particle nucleation into large clusters above a critical density. Mismatch between particle size and pattern wavelength generates assemblies with different morphological order. At even higher field strengths, repulsive dipolar interactions between the particles induce cluster melting. We propose a novel approach to generate and externally control a variety of colloidal assemblies.

Feeding of nauplii, copepodites and adults of Calanipeda aquaedulcis (Calanoida) in Mediterranean salt marshes

Feeding of the different developmental stages of Calanipeda aquaedulcis on natural particles (bacterio-, phyto- and microzooplankton) was measured in a Mediterranean salt marsh (Empordà wetlands, NE Iberian Peninsula). Bottle incubations were performed in the field both in autumn and spring. The results showed differences in the diet of the different developmental stages due to both prey type and size. In general, the size of the ingested prey increased with increasing size of the C. aquaedulcis stage. While C. aquaedulcis adults had high ingestion rates and selection coefficients for large prey (micro- and nanoplankton), nauplii preferentially consumed smaller prey items (picoplankton). Copepodites showed the widest prey size range, including pico-, nano- and microplankton. Nevertheless, the lower size limit for particle capture was similar for all stages, i.e. between 1.7 and 2.1 μm. Omnivory was observed in all stages of C. aquaedulcis. Heterotrophic prey (picoplankton, dinoflagellates and ciliates) were the most ingested items. The ability to partition the available food among the different developmental stages could represent an advantage in times of ood scarcity because it may reduce intraspecific competition. This may explain how C. aquaedulcis is able to predominate in the zooplankton community for several weeks during spring and summer ven in situations of low food availability

Bump time-frequency toolbox: a toolbox for time-frequency oscillatory bursts extraction in electrophysiological signals

Background: oscillatory activity, which can be separated in background and oscillatory burst pattern activities, is supposed to be representative of local synchronies of neural assemblies. Oscillatory burst events should consequently play a specific functional role, distinct from background EEG activity – especially for cognitive tasks (e.g. working memory tasks), binding mechanisms and perceptual dynamics (e.g. visual binding), or in clinical contexts (e.g. effects of brain disorders). However extracting oscillatory events in single trials, with a reliable and consistent method, is not a simple task. Results: in this work we propose a user-friendly stand-alone toolbox, which models in a reasonable time a bump time-frequency model from the wavelet representations of a set of signals. The software is provided with a Matlab toolbox which can compute wavelet representations before calling automatically the stand-alone application. Conclusion: The tool is publicly available as a freeware at the address: http:// www.bsp.brain.riken.jp/bumptoolbox/toolbox_home.html