Biogeochemical processes controlling oxygen and carbon isotopes of diatom silica in Late Glacial to Holocene lacustrine rhythmites

Biogeochemical cycles and sedimentary records in lakes are related to climate controls on hydrology and catchment processes. Changes in the isotopic imposition of the diatom frustules (δ 18 O diatom and δ 13 C diatom ) in lacustrine sediments can be used to reconstruct palaeoclimatic and palaeoenvironmental changes. The Lago Chungará (Andean Altiplano, 18°15 ′ S, 69°10 ′ W, 4520 masl) diatomaceous laminated sediments are made up of white and green multiannual rhythmites. White laminae were formed during short-term diatom super-blooms, and are composed almost exclusively of large-sized Cyclostephanos andinus.These diatoms bloom during mixing events when recycled nutrients from the bottom waters are brought to the surface and/or when nutrients are introduced from the catchment during periods of strong runoff. Conversely, the green laminae are thought to have been deposited over several years and are composed of a mixture of diatoms (mainly smaller valves of C. andinus and Discostella stelligera ) and organic matter. These green laminae reflect the lake's hydrological recovery from a status favouring the diatom super-blooms (white laminae) towards baseline conditions. δ 18 O diatom and δ 13 C diatom from 11,990 to 11,530 cal years BP allow us to reconstruct shifts in the precipitation/evaporation ratio and changes in the lake water dissolved carbon concentration, respectively. δ 18 O diatom values indicate that white laminae formation occurred mainly during low lake level stages, whereas green laminae formation generally occurred during high lake level stages. The isotope and chronostratigraphical data together suggest that white laminae deposition is caused by extraordinary environmental events. El Niño-Southern Oscillation and changes in solar activity are the most likely climate forcing mechanisms that could trigger such events, favouring hydrological changes at interannual-to-decadal scale. This study demonstrates the potential for laminated lake sediments to document extreme pluriannual events.

Magnetostratigraphy of the Miocene continental deposits of the Montes de Castejón (central Ebro basin, Spain): geochronological and paleoenvironmental implications

A detailed magnetostratigraphic study has been carried out in the early to middle Miocene distal alluvial and lacustrine sediments of the Montes de Castejón (central Ebro Basin). The study was based on the analysis of 196 magnetostratigraphic sites sampled along a stratigraphic interval of about 240 meters. Local magnetostratigraphy yielded a sequence of 12 magnetozones (6 normal and 6 reverse) which could be correlated with the Geomagnetic Polarity Time Scale (GPTS) interval C5Cr to C5AD (between 17 and 14.3 Ma.). The sampled sedimentary sequences include the boundary between two tectosedimentary units (TSU, T5 and T6) already defined in the Ebro Basin. The magnetostratigraphy of the Montes de Castejón allows to date the T5/T6 TSU boundary at 16.14 Ma, within chron C5Cn.1n. This magnetostratigraphy also allows us to analyse in detail as well as to discuss the variations in sedimentation rates through space and time between different lacustrine environments: Outer carbonate lacustrine fringes and distal alluvial plains (Montes de Castejón sections) show higher sedimentation rates than offshore lacustrine areas (San Caprasio section, 50 km east of Montes de Castejón).

The history of the El Niño-Southern Oscillation according to lacustrine and marine sediments

El gran impacte que El Niño - Oscil·lació del Sud (ENSO) té en la nostra societat industrialitzada ha esperonat la comunitat científica d'arreu a entendre quins són els mecanismes físics que el controlen, així com clarificar quina ha estat la seva història. El registre sedimentari de sensors naturals, com els llacs o la mar, ha permès reconstruir la història de l'ENSO. En aquest article, els autors donen una visió sintètica de la història d'aquest fenomen climàtic al llarg dels darrers quatre milions d'anys.

The history of the El Niño-Southern Oscillation according to lacustrine and marine sediments

El gran impacte que El Niño - Oscil·lació del Sud (ENSO) té en la nostra societat industrialitzada ha esperonat la comunitat científica d'arreu a entendre quins són els mecanismes físics que el controlen, així com clarificar quina ha estat la seva història. El registre sedimentari de sensors naturals, com els llacs o la mar, ha permès reconstruir la història de l'ENSO. En aquest article, els autors donen una visió sintètica de la història d'aquest fenomen climàtic al llarg dels darrers quatre milions d'anys.

Sedimentological and palaeohydrological responses to tectonics and climate in a small, closed lacustrine system: Oligocene As Pontes Basin (Spain)

A small, closed, lacustrine system developed during the restraining overstep stages of the Oligocene As Pontes strike-slip basin (Spain). The increase in basin accommodation and the headward spread of the drainage, which increased the water input, triggered a change from shallow, holomictic to deeper, meromictic conditions.

Late Neogene lacustrine record and paleogeography in the Quillagua-Llamara basin, Central Andean fore-arc (Northern Chile)

The Cenozoic QuillaguaLlamara basin (northern Chile, Central Andes) is an asymmetrical, intramassif fore-arc basin with a relatively wide northern sector separated from a narrower southward extension by a basement threshold. The north- ern sector was characterised by a noticeable Oligocene?late Neogene alluvial-fan and lacustrine dominated deposition which resulted in sequences up to 900 m thick, whereas the southern sector was often a bypass zone with thinner fluvial and lacustrine sediment accumulation.

Depositional models of lacustrine evaporites in the SE margin of the Ebro basin (Paleogene, NE Spain)

An important evaporitic sedimentation occurred during the Paleogene (Eocene to lower Oligocene) in the Barberà sector of the southeastern margin of the Tertiary Ebro Basin. This sedimentation took place in shallow lacustrine environments and was controlled by a number of factors: 1) the tectonic structuration of the margin; 2) the high calcium sulphate content in the meteoric waters coming from the marginal reliefs; 3) the semiarid climate; and 4) the development of large alluvial fans along the basin margin, which also conditioned the location of the saline lakes. The evaporites are currently composed of secondary gypsum in surface and anhydrite at depth. There are, however, vestiges of the local presence of sodium sulphates. The evaporite units, with individual thicknesses ranging between 50 and 100 m, are intercalated within various lithostratigraphic formations and exhibit a paleogeographical pattern. The units located closer to the basin margin are characterized by a massive gypsum lithofacies (originally, bioturbated gypsum) bearing chert, and also by meganodular gypsum locally (originally, meganodules of anhydrite) in association with red lutites and clastic intercalations (gypsarenites, sandstones and conglomerates). Chert, which is only linked to the thickest gypsum layers, seems to be an early diagenetic, lacustrine product. Cyclicity in these proximal units indicates the progressive development of lowsalinity, lacustrine bodies on red mud flats. At the top of some cycles, exposure episodes commonly resulted in dissolution, erosion, and the formation of edaphic features. In contrast, the units located in a more distal position with regard to the basin margin are formed by an alternation of banded-nodular gypsum and laminated gypsum layers in association with grey lutites and few clastic intercalations. These distal units formed in saline lakes with a higher ionic concentration. Exposure episodes in these lakes resulted in the formation of synsedimentary anhydrite and sabkha cycles. In some of these units, however, outer rims characterized by a lithofacies association similar to that of the proximal units occur (nodular gypsum, massive gypsum and chert nodules).

Lacustrine Systems in Convergent Margins

From the late seventies to the present day, lacustrine sedimentology and lacustrine-related basin analysis have developed from a near-marginal aca- demic curiosity into a new ground-breaking multidisciplinary body of learning. The starting-point was economic interest in ancient lacustrine sequences as potential suppliers of natural resources such as raw materials (diatomites, clays), evaporite salts and energy (hydrocarbons and coal). The early discoveries of substantial hydrocarbon reserves connected with lacustrine facies in the western USA heralded the huge reserves found later in China, Brazil, western Africa, southeast Asia and the Caspian Sea, among other places.

Coal deposition in carbonate rich shallow Lacustrine systems: The Calaf and Mequinenza sequences (Oligocene, eastern Ebro Basin, NE Spain)

Two main coal-bearing sequences developed during the Oligocene in the Tertiary Ebro Basin, the Calaf (early Oligocene) and Mequinenza (late Oligocene) coal basins. Coal deposition took place in shallow marsh-swamp-lake complexes which sometimes became closed and evolved under warm climatic conditions with fluctuating humidity. These shallow lacustrine systems are closely interrelated with the terminal parts of the distributive fluvial systems which spread from the tectonically active Ebro basin margins. Laterally extensive lignite-bearing sequences, including rather thin, lenticular autochthonous and/or hypautochthonous coal seams with high ash and sulphur contents, characterized coal deposition in the shallow lacustrine systems. Coal seam geometry, which makes them nearly subeconomic, resulted from the tectonic instability during basin margin evolution and the sometimes closed, arid conditions under which the lacustrine systems evolved. High ash and sulphur contents resulted from the inadequate isolation of peat forming environments from clastic influx and from the very low acidity and sometimes high sulphate contents of the lacustrine waters. Coal exploration in shallow lacustrine sequences similar to those described here must take into account that the spread of coal-forming environments and maxima of coal deposition are usually coincident with lake expansions and retraction or shifting of the terminal fluvial zones interrelated with the lacustrine areas.

20 Myr of eccentricity paced lacustrine cycles in the Cenozoic Ebro Basin

Long-period orbital forcing is a crucial component of the major global climate shifts during the Cenozoic as revealed in marine pelagic records. A complementary regional perspective of climate change can be assessed from internally drained lake basins, which are directly affected by insolation and precipitation balance. The Ebro Basin in northeastern Iberia embraces a 20 Myr long continuous sedimentary record where recurrent expansions and retractions of the central lacustrine system suggest periodic shifts of water balance due to orbital oscillations. In order to test climatic (orbital) forcing a key-piece of the basin, the Los Monegros lacustrine system, has been analyzed in detail. The cyclostratigraphic analysis points to orbital eccentricity as pacemaker of short to long-term lacustrine sequences, and reveals a correlation of maxima of the 100-kyr, 400-kyr and 2.4-Myr eccentricity cycles with periods of lake expansion. A magnetostratigraphy-based chronostratigraphy of the complete continental record allows further assessing long-period orbital forcing at basin scale, a view that challenges alternate scenarios where the stratigraphic architecture in foreland systems is preferably associated to tectonic processes. We conclude that while the location of lacustrine depocenters reacted to the long-term tectonic-driven accommodation changes, shorter wavelenght oscillations of lake environments, still million-year scale, claims for a dominance of orbital forcing. We suggest a decoupling between (tectonic) supply-driven clastic sequences fed from basin margins and (climatic) base level-driven lacustrine sequences in active settings with medium to large sediment transfer systems.

Isotermes d'adsorpció d'alquilfenols en sediments i altres materials

Projecte de recerca elaborat a partir d’una estada al Center of Applied Geosciences de la Eberhard Karls Universität entre abril i octubre del 2007. Durant l'estada es va adquirir la tècnica per a la realització d'isotermes d'adsorció aplicant-la posteriorment a l'estudi de dos compostos del grup dels alquilfenols (nonilfenol i octilfenol). Aquestes isotermes es van realitzar en diversos sediments provinents de la conca hidrogràfica del riu Ebre i en altres dos materials (lignit i torba), tots ells amb diferent contingut de carboni orgànic total (que varia entre 0,4% per a un dels sediments i 47,8% per a la torba), per a estudiar la influència d'aquest paràmetre en els comportament del nonilfenol pel que fa a l'adsorció. Per altra banda es va afegir l’octilfenol a l’estudi, tant per separat com en combinació amb el nonilfenol, i es va extendre la isoterma per al nonilfenol a concentracions més baixes, properes a les concentracions que es poden trobar d’aquest compost al medi. Aquestes últimes isotermes es van realitzar utilitzant en tots els casos un dels sediments del riu Ebre, amb un contingut de carboni orgànic del 5,8 %, per a poder comparar els resultats sense la influència d’aquest paràmetre. Totes les mostres es van analitzar utilitzant un cromatogràf de gasos acoblat a un espectròmetre de masses.

Analisi de compostos orgànics persistents i estudi de la procedència d'hidrocarburs en sediments del mar Mediterrani català

Els sediments del fons marí són molt importants en els ecosistemes aquàtics. Aquests sediments són considerats absorbents naturals, ja que s’hi acumulen moltes substàncies nocives, com ara metalls pesants i contaminants orgànics persistents (COPs). En aquest estudi s’han analitzat mostres de sediments del mar Mediterrani amb la finalitat d’examinar els COPs i la possible procedència d’hidrocarburs derivats del petroli. Les mostres han estat extretes davant de la desembocadura del riu Besòs (se n’ha fet una extracció a 8 km i una altra a 54 km de distància respecte la costa) i davant del municipi català anomenat Vilanova i la Geltrú (se n’ha fet, també, una extracció a 8-10 km i una altra a 30-40 km de distància respecte la costa). D’aquestes mostres, obtingudes per perforació, se n’han analitzat el primer i segon centímetres. S’han quantificat els hidrocarburs aromàtics policíclics (PAHs), els bifenils policlorats (PCBs) i els compostos organoclorats (OCPs) utilitzats antigament com a pesticides. S’ha posat de manifest que en les zones més properes a la costa, les concertacions COPs són més elevades a la regió més meridional, tot i estar davant de la desembocadura del riu Besòs. Segurament això és degut a la influència de la deriva litoral (corrent costaner marí en direcció NE-SW). Finalment, l’índex Phytane/Pristane, l’índex de preferència de carboni o, en anglès Carbon Preference Index (CPI) i la barreja complexa sense resoldre o, en anglès, Unresolved Complex Mixture (UCM) apunten a la conclusió que l’origen dels hidrocarburs analitzats (n-alcans) podria ser petrogènic.

Application of compositional data analysis to geochemical data of marine sediments

In an earlier investigation (Burger et al., 2000) five sediment cores near the RodriguesTriple Junction in the Indian Ocean were studied applying classical statistical methods(fuzzy c-means clustering, linear mixing model, principal component analysis) for theextraction of endmembers and evaluating the spatial and temporal variation ofgeochemical signals. Three main factors of sedimentation were expected by the marinegeologists: a volcano-genetic, a hydro-hydrothermal and an ultra-basic factor. Thedisplay of fuzzy membership values and/or factor scores versus depth providedconsistent results for two factors only; the ultra-basic component could not beidentified. The reason for this may be that only traditional statistical methods wereapplied, i.e. the untransformed components were used and the cosine-theta coefficient assimilarity measure.During the last decade considerable progress in compositional data analysis was madeand many case studies were published using new tools for exploratory analysis of thesedata. Therefore it makes sense to check if the application of suitable data transformations,reduction of the D-part simplex to two or three factors and visualinterpretation of the factor scores would lead to a revision of earlier results and toanswers to open questions . In this paper we follow the lines of a paper of R. Tolosana-Delgado et al. (2005) starting with a problem-oriented interpretation of the biplotscattergram, extracting compositional factors, ilr-transformation of the components andvisualization of the factor scores in a spatial context: The compositional factors will beplotted versus depth (time) of the core samples in order to facilitate the identification ofthe expected sources of the sedimentary process.Kew words: compositional data analysis, biplot, deep sea sediments

Interactions between grain size and composition of sediments: two examples

Two contrasting case studies of sediment and detrital mineral composition are investigated in order to outline interactions between chemical composition and grain size. Modern glacial sediments exhibit a strong dependence of the two parameters due to the preferential enrichment of mafic minerals, especially biotite, in the fine-grained fractions. On the other hand, the composition of detrital heavy minerals (here: rutile) appears to be not systematically related to grain-size, but is strongly controlled by location, i.e. the petrology of the source rocks of detrital grains. This supports the use of rutile as a well-suited tracer mineral for provenance studies. The results further suggest that (i) interpretations derived from whole-rock sediment geochemistry should be flanked by grain-size observations, and (ii) a more sound statistical evaluation of these interactions require the development of new tailor-made statistical tools to deal with such so-called two-way compositions

A Log-linear model of grain size influence on the geochemistry of sediments

Sediment composition is mainly controlled by the nature of the source rock(s), and chemical (weathering) and physical processes (mechanical crushing, abrasion, hydrodynamic sorting) during alteration and transport. Although the factors controlling these processes are conceptually well understood, detailed quantification of compositional changes induced by a single process are rare, as are examples where the effects of several processes can be distinguished. The present study was designed to characterize the role of mechanical crushing and sorting in the absence of chemical weathering. Twenty sediment samples were taken from Alpine glaciers that erode almost pure granitoid lithologies. For each sample, 11 grain-size fractions from granules to clay (ø grades &-1 to &9) were separated, and each fraction was analysed for its chemical composition.The presence of clear steps in the box-plots of all parts (in adequate ilr and clr scales) against ø is assumed to be explained by typical crystal size ranges for the relevant mineral phases. These scatter plots and the biplot suggest a splitting of the full grain size range into three groups: coarser than ø=4 (comparatively rich in SiO2, Na2O, K2O, Al2O3, and dominated by “felsic” minerals like quartz and feldspar), finer than ø=8 (comparatively rich in TiO2, MnO, MgO, Fe2O3, mostly related to “mafic” sheet silicates like biotite and chlorite), and intermediate grains sizes (4≤ø &8; comparatively rich in P2O5 and CaO, related to apatite, some feldspar).To further test the absence of chemical weathering, the observed compositions were regressed against three explanatory variables: a trend on grain size in ø scale, a step function for ø≥4, and another for ø≥8. The original hypothesis was that the trend could be identified with weathering effects, whereas each step function would highlight those minerals with biggest characteristic size at its lower end. Results suggest that this assumption is reasonable for the step function, but that besides weathering some other factors (different mechanical behavior of minerals) have also an important contribution to the trend.Key words: sediment, geochemistry, grain size, regression, step function