Artificial diets for the production of natural enemies (predators and parasitoids) of greenhouse pest insects

The aim of this contract was to finalise in vitro rearing on artificial diets of entomophagous insects useful to control insect pests mainly in greenhouses through an analytical and rational approach. The work focuses on the development and optimisation of artificial diets for one coccinellid (Harmonia axyridis), two heteropteran predators (Orius laevigatus, Dicyphus tamaninii), and a braconid parasitoid of aphids (Aphidius ervi). The definition of the artificial diets was based on biochemical analyses of their natural food (aphids) or substitution food for the predators (Ephestia kuehniella eggs). Reliable quality control parameters of the entomophages produced were used in order to adjust dietary composition and formulation of the different diets tested.

Job losses, outsourcing and relocation: Empirical evidence using microdata

Using microdata, we analyse the determinants of firm relocation and conventional outsourcing decisions as a way to reduce employment. The results for a sample of 32 countries show the relevance of factors not considered previously in the literature. Firms that are below average in quality or innovation have a higher propensity to externalise part of their production through outsourcing, while lower relative profitability and longer time to market for new products each imply a higher probability of relocation.

Implementing CLIL in a primary school in Spain : the effects of CLIL on L2 English learners' oral production skills

This study presents the results of implementing a CLIL programme in a Catalan primary school three years after the onset of the implementation. The main objective of this investigation was to determine the effects of CLIL on students’ L2 English oral performance in terms of Complexity, Accuracy and Fluency (CAF). The results obtained suggest that CLIL learners outperform non-CLIL learners not only in fluency, but also in syntactic complexity. However, despite the encouraging results, the study concludes that further research which transcends the methodological limitations observed in the study is needed in order to confirm the results

The Effect of occupational sex-composition on earnings: job-specialisation, sex-role attitudes and the division of domestic-labour in Spain

Important theoretical controversies remain unresolved in the literatire on occupational sex-segregation and the gender wage-gap. A useful way of summarising these controversies is viewing them as a debate between - cultural -socialisation. The paper discusses these theories in detail and carries out a preliminary test of the relative explanatory performance of some of their most consequential predictions. This is done by drawing on the Spanish sample of the second wave of the European Social Survey, ESS. The empirical analysis of ESS data illustrates the notable analytical pay-offs that can stem from using rich individual-level indicators, but also exemplifies the statistical llimitations generated by small sample size and high rates of non-response. Empirical results should, therefore, be taken as preliminary. They seem to suggest that the effect of occupational sex-segregation on wages could be explicable by workers' sex-role attitutes, their relative input in domestic production and the job-specific human capital requirements of their jobs. Of these three factors, job-specialisation seeems clearly the most important one.

Spinning welfare: The gains from process innovation in cotton and car production

Economists and economic historians want to know how much better life is today than in the past.Fifty years ago economic historians found surprisingly small gains from 19th century US railroads,while more recently economists have found relatively large gains from electricity, computers and cellphones. In each case the implicit or explicit assumption is that researchers were measuring the valueof a new good to society. In this paper we use the same techniques to find the value to society ofmaking existing goods cheaper. Henry Ford did not invent the car, and the inventors of mechanisedcotton spinning in the industrial revolution invented no new product. But both made existing productsdramatically cheaper, bringing them into the reach of many more consumers. That in turn haspotentially large welfare effects. We find that the consumer surplus of Henry Ford s production linewas around 2% by 1923, 15 years after Ford began to implement the moving assembly line, while themechanisation of cotton spinning was worth around 6% by 1820, 34 years after its initial invention.Both are large: of the same order of magnitude as consumer expenditure on these items, and as largeor larger than the value of the internet to consumers. On the social savings measure traditionally usedby economic historians, these process innovations were worth 15% and 18% respectively, makingthem more important than railroads. Our results remind us that process innovations can be at least asimportant for welfare and productivity as the invention of new products.

Solving two production scheduling problems with sequence-dependent set-up times

In today’s competitive markets, the importance of goodscheduling strategies in manufacturing companies lead to theneed of developing efficient methods to solve complexscheduling problems.In this paper, we studied two production scheduling problemswith sequence-dependent setups times. The setup times areone of the most common complications in scheduling problems,and are usually associated with cleaning operations andchanging tools and shapes in machines.The first problem considered is a single-machine schedulingwith release dates, sequence-dependent setup times anddelivery times. The performance measure is the maximumlateness.The second problem is a job-shop scheduling problem withsequence-dependent setup times where the objective is tominimize the makespan.We present several priority dispatching rules for bothproblems, followed by a study of their performance. Finally,conclusions and directions of future research are presented.

An investigation of the relationship between job characteristics and the gender wage gap

This paper re-examines gender wage differences, taking into account notonly worker characteristics but also job characteristics. Considerationof a wide set of job quality indicators can explain a fraction of thewage gap that would otherwise be attributed to pure wage discrimination.In any case, the fraction of the wage gap that remains associated todifferential rewards for identical factors across sexes is stillsubstantial. Our results suggest that in order to avoid overestimationof the fraction of the wage gap attributable to discrimination, it isnecessary to control for job characteristics.

Stocks assesment, biomass and fish production in two mediterranean basins (NE Spain)

In order to evaluate the success of the reintroduction of the Eurasian otter (Lutra lutra) in the Empordh wetlands (Parc Natural dels Aiguamolls de I'Empordhà), and the Muga and Fluvih basins, density of fish, biomass and production in the Muga and Fluvia Rivers have been estimated, since fishes represent the principal prey in the otter diet. 12 study sites were selected in order to survey the main flows in both basins. Electrofishing surveys were conducted by blocking off the station with barrier nets, which was performed upon 3 successive catches. The density estimated presents a range of 1,136-1 25 ind .ha' in the Muga basin, 4,49-163 ind.ha' in the Fluvih basin and 3,76-52,2 ind.ha' in the Empordh wetlands. Estimated biomass ranges are 0,616-277,6 g.m2, 8,79-351,2 g.m2, and 5,7-108 g.m-2 respectively. These density anfi biomass ranges are similar to other results obtained from rivers inhabited by the Eurasian otter in NE Spain

Signatures of CP violation in the presence of multiple b-pair production at hadron colliders

We calculate the production of two b-quark pairs in hadron collisions. Sources of multiple pairs are multiple interactions and higher order perturbative QCD mechanisms. We subsequently investigate the competing effects of multiple b-pair production on measurements of CP violation: (i) the increase in event rate with multiple b-pair cross sections which may reach values of the order of 1 b in the presence of multiple interactions and (ii) the dilution of b versus b tagging efficiency because of the presence of events with four B mesons. The impact of multiple B-meson production is small unless the cross section for producing a single pair exceeds 1 mb. We show that even for larger values of the cross section the competing effects (i) and (ii) roughly compensate so that there is no loss in the precision with which CP-violating CKM angles can be determined.

Biotechnological production of taxanes: a molecular approach

Plant cell cultures constitute a promise for the production of a high number of phytochemicals, although the majority ofbioprocesses that have been developed so far have not resultedcommercially successful. An overview indicates that most of theresearch carried out until now is of the empirical type. For this reason,there is a need for a rational approach to the molecular and cellularbasis of metabolic pathways and their regulation in order to stimulatefuture advances.The empirical investigations are based on the optimization of theculture system, exclusively considering input factors such as theselection of cellular lines, type and parameters of culture, bioreactordesign and elicitor addition, and output factors such as cellular growth,the uptake system of nutrients, production and yield. In a rationalapproach towards the elucidation of taxol and related taxaneproduction, our group has studied the relationship between the taxaneprofile and production and the expression of genes codifying forenzymes that participate in early, intermediate and late steps of theirbiosynthesis in elicited Taxus spp cell cultures. Our results show that elicitors induce a dramatic reprogramming of gene expression in Taxus cell cultures, whichlikely accounts for the enhanced production of taxol and related taxanes and we have alsodetermined some genes that control the main flux limiting steps. The application ofmetabolic engineering techniques for the production of taxol and taxanes of interest is also discussed.

La actividad productiva de la fábrica de harinas “La Montserrat” (Girona) en el año agrícola de 1903-1904 = The Production Activities at the Company Harinera “La Montserrat” (Girona) over the Agricultural Year 1903-1904

Harinera La Montserrat, S.A, a company involved in the manufacturing and trading of cereals and flour, was founded in Girona in 1898 by José Ensesa y Cía., Sociedad en Comandita. With the objective to determine how the product activity of this business was structured, we have studied in detail the operations that were carried out over the agricultural year 1903-1904. We have focused on three main aspects. Firstly, the purchasing of wheat (origin, transportation, prices); secondly, the production of flour (using internal and external wheat, profits); and thirdly, its distribution (customers, destination). Finally, we have analyzed the profit and loos account for this period in order to find out if this business was profitable

Combining phospholipases and a liquid lipase for one-step biodiesel production using crude oils

Background Enzymatic biodiesel is becoming an increasingly popular topic in bioenergy literature because of its potential to overcome the problems posed by chemical processes. However, the high cost of the enzymatic process still remains the main drawback for its industrial application, mostly because of the high price of refined oils. Unfortunately, low cost substrates, such as crude soybean oil, often release a product that hardly accomplishes the final required biodiesel specifications and need an additional pretreatment for gums removal. In order to reduce costs and to make the enzymatic process more efficient, we developed an innovative system for enzymatic biodiesel production involving a combination of a lipase and two phospholipases. This allows performing the enzymatic degumming and transesterification in a single step, using crude soybean oil as feedstock, and converting part of the phospholipids into biodiesel. Since the two processes have never been studied together, an accurate analysis of the different reaction components and conditions was carried out. Results Crude soybean oil, used as low cost feedstock, is characterized by a high content of phospholipids (900 ppm of phosphorus). However, after the combined activity of different phospholipases and liquid lipase Callera Trans L, a complete transformation into fatty acid methyl esters (FAMEs >95%) and a good reduction of phosphorus (P <5 ppm) was achieved. The combination of enzymes allowed avoidance of the acid treatment required for gums removal, the consequent caustic neutralization, and the high temperature commonly used in degumming systems, making the overall process more eco-friendly and with higher yield. Once the conditions were established, the process was also tested with different vegetable oils with variable phosphorus contents. Conclusions Use of liquid lipase Callera Trans L in biodiesel production can provide numerous and sustainable benefits. Besides reducing the costs derived from enzyme immobilization, the lipase can be used in combination with other enzymes such as phospholipases for gums removal, thus allowing the use of much cheaper, non-refined oils. The possibility to perform degumming and transesterification in a single tank involves a great efficiency increase in the new era of enzymatic biodiesel production at industrial scale.

Irrigation performance and gross water productivity in furrow-irrigated ornamental tree production

In the ornamental plant production region of Girona (Spain), which is one of the largest of its kind in southern Europe, most of the surface is irrigated using wide blocked-end furrows. The objectives of this paper were: (1) to evaluate the irrigation scheduling methods used by ornamental plant producers; (2) to analyse different scenarios in order to assess how they affect irrigation performance; (3) to evaluate the risk of deep percolation; and (4) to calculate gross water productivity. A two-year study in a representative commercial field, planted with Prunus cerasifera ‘Nigra’, was carried out. The irrigation dose applied by the farmers was slightly smaller than the required water dose estimated by the use of two different methods: the first based on soil water content, and the second based on evapotranspiration. Distribution uniformity and application eff iciency were high, with mean values above 87%. Soil water content measurements revealed that even at the end of the furrow, where the infiltrated water depth was greatest, more than 90% of the infiltrated water was retained in the shallowest 40 cm of the soil; accordingly, the risk of water loss due to deep percolation was minimal. Gross water productivity for ornamental tree production was € 11.70 m–3, approximately 20 times higher than that obtained with maize in the same region.

Job losses, outsourcing and relocation: empirical evidence using microdata

Using microdata, we analyse the determinants of firm relocation and conventional outsourcing decisions as a way to reduce employment. The results for a sample of 32 countries show the relevance of factors not considered previously in the literature. Firms that are below average in quality or innovation have a higher propensity to externalise part of their production through outsourcing, while lower relative profitability and longer time to market for new products each imply a higher probability of relocation.