Residual Stress Measurement on a MEMS Structure With High-Spatial Resolution

A new approach to the local measurement of residual stress in microstructures is described in this paper. The presented technique takes advantage of the combined milling-imaging features of a focused ion beam (FIB) equipment to scale down the widely known hole drilling method. This method consists of drilling a small hole in a solid with inherent residual stresses and measuring the strains/displacements caused by the local stress release, that takes place around the hole. In the presented case, the displacements caused by the milling are determined by applying digital image correlation (DIC) techniques to high resolution micrographs taken before and after the milling process. The residual stress value is then obtained by fitting the measured displacements to the analytical solution of the displacement fields. The feasibility of this approach has been demonstrated on a micromachined silicon nitride membrane showing that this method has high potential for applications in the field of mechanical characterization of micro/nanoelectromechanical systems.

Internal promotion versus external recruitment: evidence in industrial plants

An analysis is carried out in a sample of 738 industrial plants of the determining factors in the use of internal promotion of blue-collar workers to middle managers and skilled technicians as against their external recruitment. The use of internal promotion is positively correlated with variables indicative of the efforts made by plants to measure employees' skills, and to a lesser extent, with the level of specificity of investments in human capital made by blue-collar workers. Contrary to what was expected, variables related with the use and efficiency of other incentive systems have no significant influence on the increased or decreased use of internal promotion. These results are initial evidence that internal promotions are used to protect and favour specific investments, especially those made by firms in order to discover their workers' skills.

Mergers, investment decisions and internal organisation

We analyse the effects of investment decisions and firms' internal organisation on the efficiency and stability of horizontal mergers. In our framework economies of scale are endogenous and there might be internal conflict within merged firms. We show that often stable mergers do not lead to more efficiency and may even lead to efficiency losses. These mergers lead to lower total welfare, suggesting that a regulator should be careful in assuming that possible efficiency gains of a merger will be effiectively realised. Moreover, the paper offers a possible explanation for merger failures.

A general construction of internal sheaves in algebraic set theory

We present a solution to the problem of defining a counterpart in Algebraic Set Theory of the construction of internal sheaves in Topos Theory. Our approach is general in that we consider sheaves as determined by Lawvere-Tierney coverages, rather than by Grothen-dieck coverages, and assume only a weakening of the axioms for small maps originally introduced by Joyal and Moerdijk, thus subsuming the existing topos-theoretic results.

Staffing strategies in SME's: determinants of external recruitment and internal promotion

The purpose of this paper is to examine the determinants of use internal or external labour market to fill a firm vacancy in SME’s taking into account the differences existing among blue and white collar jobs. Following different theories we can identify three main reasons for use internal candidates rather than external ones‐ firm specific knowledge, adverse selection problems and motivation‐. However, there are others factors that might affect this choice but the last theories don’t take into account. In this paper we try to shed some light on what are these other factors that may affect firm decision to use internal or external labour market. Particularly we analyses the relationship among new technologies, innovation activity and firm location on the staffing strategy. The results shows difference behaviour on the decision to fill a vacancy using internal or external labour markets between manufacturing and service firms, and this decision depends not only on firm internal characteristics, like technological complexity or innovation activity, but also on firm location. The results also support the hypothesis of ports of entry especially in the manufacturing sector.

Internal and External Determinants of Radical and incremental Innovation in SMEs: the case of Catalonia

There is a major concern in economic literature about innovation, which is the interaction between internal and external factors.. In this paper those activities are hypothesized as being determined by some territorial characteristics like labour skills, technological infrastructure, educational facilities, agglomeration economies and industrial structure. This assumption allows understanding why those innovative activities are not spread across space and are located into specific areas. We use a detailed survey containing microdata for 497 SMEs located in Catalonia.

Acute Damage to the Posterior Limb of the Internal Capsule on Diffusion Tensor Tractography as an Early Imaging Predictor of Motor Outcome after Stroke

Background and Purpose Early prediction of motor outcome is of interest in stroke management. We aimed to determine whether lesion location at DTT is predictive of motor outcome after acute stroke and whether this information improves the predictive accuracy of the clinical scores. Methods We evaluated 60 consecutive patients within 12 hours of MCA stroke onset. We used DTT to evaluate CST involvement in the MC and PMC, CS, CR, and PLIC and in combinations of these regions at admission, at day 3, and at day 30. Severity of limb weakness was assessed using the m-NIHSS (5a, 5b, 6a, 6b). We calculated volumes of infarct and FA values in the CST of the pons. Results Acute damage to the PLIC was the best predictor associated with poor motor outcome, axonal damage, and clinical severity at admission (P&.001). There was no significant correlation between acute infarct volume and motor outcome at day 90 (P=.176, r=0.485). The sensitivity, specificity, and positive and negative predictive values of acute CST involvement at the level of the PLIC for 4 motor outcome at day 90 were 73.7%, 100%, 100%, and 89.1%, respectively. In the acute stage, DTT predicted motor outcome at day 90 better than the clinical scores (R2=75.50, F=80.09, P&.001). Conclusions In the acute setting, DTT is promising for stroke mapping to predict motor outcome. Acute CST damage at the level of the PLIC is a significant predictor of unfavorable motor outcome.

Media exposure and internal migration-evidence from Indonesia

This paper investigates the impact of television on internal migration in Indonesia. We exploit the differential introduction of private television throughout the country and the variation in signal reception due to topography to estimate the causal effect of media exposure. Our estimates reveal important long and short run effects. An increase of one standard deviation in the number of private TV channels received in the area of residence reduces future inter-provincial migration by 1.7-2.7 percentage points, and all migration (inter and intra-provincial) by 4-7.4 percentage points. Short run effects are slightly smaller, but still sizeable and statistically significant. We also show that respondents less exposed to private TV are more likely to consider themselves among the poorest groups of the society. As we discuss in a stylized model of migration choice under imperfect information, these findings are consistent with Indonesia citizens over-estimating the net gains from internal migration.

Internal Message para Joomla

El proyecto Internal Message consiste en el desarrollo de un sistema de mensajería interna que comunique de forma fiable y segura a los usuarios de cualquier sistema de gestión de contenidos Joomla.

Internal test sets studies in a group of antimalarials

Topological indices have been applied to build QSAR models for a set of 20 antimalarial cyclic peroxy cetals. In order to evaluate the reliability of the proposed linear models leave-n-out and Internal Test Sets (ITS) approaches have been considered. The proposed procedure resulted in a robust and consensued prediction equation and here it is shown why it is superior to the employed standard cross-validation algorithms involving multilinear regression models

The effect of counterpoise correction and relaxation energy term to the internal rotation barriers: application to the BF3 ...NH3 and C2H4 ...SO2 dimers

The relevance of the fragment relaxation energy term and the effect of the basis set superposition error on the geometry of the BF3⋯NH3 and C2H4⋯SO2 van der Waals dimers have been analyzed. Second-order Møller-Plesset perturbation theory calculations with the d95(d,p) basis set have been used to calculate the counterpoise-corrected barrier height for the internal rotations. These barriers have been obtained by relocating the stationary points on the counterpoise-corrected potential energy surface of the processes involved. The fragment relaxation energy can have a large influence on both the intermolecular parameters and barrier height. The counterpoise correction has proved to be important for these systems

Membership and internal democracy. Immigrant organisations in the city of Oslo

Immigrant organisations in the City of Oslo receive support from the government for their daily operation. In order to receive such support, each organisation must be membership-based and have internal democratic procedures. This paper raises the question of how we can understand this combination of support for ethnic based organisations and requirements of membership and internal democracy. It explores the usefulness of two partly overlapping ways of understanding this policy and discusses their interrelationship. Firstly, within the context of the crisis of multiculturalism, the paper discusses whether this combination is based on the aim of strengthening the organisations’ procedural commitment to liberal-democratic principles. Secondly, the paper analyses whether requirements of membership and internal democracy can mainly be understood within the framework of the Nordic model of voluntary organisation. By comparing the policy at three empirical levels, the paper concludes that this combination can mainly be understood within the framework of the traditional historical Nordic model, but that there is an ambiguity in this policy related to minority rights.

Mapping cell-matrix stresses during stretch reveals inelastic reorganization of the cytoskeleton.

The mechanical properties of the living cell are intimately related to cell signaling biology through cytoskeletal tension. The tension borne by the cytoskeleton (CSK) is in part generated internally by the actomyosin machinery and externally by stretch. Here we studied how cytoskeletal tension is modified during stretch and the tensional changes undergone by the sites of cell-matrix interaction. To this end we developed a novel technique to map cell-matrix stresses during application of stretch. We found that cell-matrix stresses increased with imposition of stretch but dropped below baseline levels on stretch release. Inhibition of the actomyosin machinery resulted in a larger relative increase in CSK tension with stretch and in a smaller drop in tension after stretch release. Cell-matrix stress maps showed that the loci of cell adhesion initially bearing greater stress also exhibited larger drops in traction forces after stretch removal. Our results suggest that stretch partially disrupts the actin-myosin apparatus and the cytoskeletal structures that support the largest CSK tension. These findings indicate that cells use the mechanical energy injected by stretch to rapidly reorganize their structure and redistribute tension.

Residual thermomechanical stresses in thinned-chip assemblies

A new technology for the three-dimensional (3-D) stacking of very thin chips on a substrate is currently under development within the ultrathin chip stacking (UTCS) Esprit Project 24910. In this work, we present the first-level UTCS structure and the analysis of the thermomechanical stresses produced by the manufacturing process. Chips are thinned up to 10 or 15 m. We discuss potentially critical points at the edges of the chips, the suppression of delamination problems of the peripheral dielectric matrix and produce a comparative study of several technological choices for the design of metallic interconnect structures. The purpose of these calculations is to give inputs for the definition of design rules for this technology. We have therefore undertaken a programme that analyzes the influence of sundry design parameters and alternative development options. Numerical analyses are based on the finite element method.