Geometric tools to determine the hyperbolicity of limit cycles

"Vegeu el resum a l'inici del document del fitxer adjunt."

Documentation and sport information: the challenges and opportunities brought by new technologies

This text corresponds to the contents of the seminar “Information Services at the Sport Institutions” held by the author as part of the programme of activities of the Invited Professor of Olympism of the International Chair in Olympism (IOC-UAB) in 2001. The seminar discusses the potential of technologies such as the Internet in sports documentation.

Euclidean geometric invariant of framed knots in manifolds

We present an invariant of a three dimensional manifold with a framed knot in it based on the Reidemeister torsion of an acyclic complex of Euclidean geometric origin. To show its nontriviality, we calculate the invariant for some framed (un)knots in lens spaces. An important feature of our work is that we are not using any nontrivial representation of the manifold fundamental group or knot group.

A computational and geometric approach to phase resetting curves and surfaces

"Vegeu el resum a l'inici del document del fitxer adjunt."

A geometric mechanism of diffusion: Rigorous verification in a priori unstable Hamiltonian systems

In this paper we consider a representative a priori unstable Hamiltonian system with 2+1/2 degrees of freedom, to which we apply the geometric mechanism for diffusion introduced in the paper Delshams et al., Mem.Amer.Math. Soc. 2006, and generalized in Delshams and Huguet, Nonlinearity 2009, and provide explicit, concrete and easily verifiable conditions for the existence of diffusing orbits. The simplification of the hypotheses allows us to perform explicitly the computations along the proof, which contribute to present in an easily understandable way the geometric mechanism of diffusion. In particular, we fully describe the construction of the scattering map and the combination of two types of dynamics on a normally hyperbolic invariant manifold.

Geometric and long run aspects of Granger causality

This paper extends multivariate Granger causality to take into account the subspacesalong which Granger causality occurs as well as long run Granger causality. The propertiesof these new notions of Granger causality, along with the requisite restrictions, are derivedand extensively studied for a wide variety of time series processes including linear invertibleprocess and VARMA. Using the proposed extensions, the paper demonstrates that: (i) meanreversion in L2 is an instance of long run Granger non-causality, (ii) cointegration is a specialcase of long run Granger non-causality along a subspace, (iii) controllability is a special caseof Granger causality, and finally (iv) linear rational expectations entail (possibly testable)Granger causality restriction along subspaces.

Parallelizing remote sensing image geometric correction

Remote sensing spatial, spectral, and temporal resolutions of images, acquired over a reasonably sized image extent, result in imagery that can be processed to represent land cover over large areas with an amount of spatial detail that is very attractive for monitoring, management, and scienti c activities. With Moore's Law alive and well, more and more parallelism is introduced into all computing platforms, at all levels of integration and programming to achieve higher performance and energy e ciency. Being the geometric calibration process one of the most time consuming processes when using remote sensing images, the aim of this work is to accelerate this process by taking advantage of new computing architectures and technologies, specially focusing in exploiting computation over shared memory multi-threading hardware. A parallel implementation of the most time consuming process in the remote sensing geometric correction has been implemented using OpenMP directives. This work compares the performance of the original serial binary versus the parallelized implementation, using several multi-threaded modern CPU architectures, discussing about the approach to nd the optimum hardware for a cost-e ective execution.

DOI: The "Big Brother" in the dissemination of scientific documentation

Rapid growth in the availability and use of digital documents has prompted the development of instruments to handle them. A most important example of these instruments are digital identifiers, which provide a codification system that allows digital items, usually up to the level of a computer file, to be singled out and located. Digital identifiers make up standardized global systems applied to specific products or areas. They are part of the very many identifiers developed to handle large numbers of items and large amounts of information for transactional purposes, which often have a global span. Digital identifiers include the ubiquitous Global Trade Item Number (GTIN), a code that unequivocally identifies trade items all around the world. The GTIN can take on several configurations depending on its application. These include: EAN-13, EAN-8, EAN-14, and UCC-12. EAN-13 is the code used for retail products in order to facilitate trade at the point of sale; its widely known symbol or graphical form is the EAN/UPC-13 bar code...

Nanocrystalline M-type hexaferrite powders: preparation, geometric and magnetic propertiess

Co-Ti-Sn-Ge substituted M-type bariumhexaferrite powders with mean grain sizes between about 10 nm and about 1 ¿m and a narrow size distribution were prepared reproducibly by means of a modified glass crystallization method. At annealing temperatures between 560 and 580°C of the amorphous flakes nanocrystalline particles grow. They behave superparamagnetically at room temperature and change into stable magnetic single domains at lower temperatures. The magnetic volume of the powders is considerably less than the geometric one. However, the effective anisotropy fields are larger by a Factor of two to three.

Higher order Lagrangian systems: Geometric structures, Dynamics, and Constraints

In order to study the connections between Lagrangian and Hamiltonian formalisms constructed from aperhaps singularhigher-order Lagrangian, some geometric structures are constructed. Intermediate spaces between those of Lagrangian and Hamiltonian formalisms, partial Ostrogradskiis transformations and unambiguous evolution operators connecting these spaces are intrinsically defined, and some of their properties studied. Equations of motion, constraints, and arbitrary functions of Lagrangian and Hamiltonian formalisms are thoroughly studied. In particular, all the Lagrangian constraints are obtained from the Hamiltonian ones. Once the gauge transformations are taken into account, the true number of degrees of freedom is obtained, both in the Lagrangian and Hamiltonian formalisms, and also in all the intermediate formalisms herein defined.

Nanocrystalline M-type hexaferrite powders: preparation, geometric and magnetic propertiess

Co-Ti-Sn-Ge substituted M-type bariumhexaferrite powders with mean grain sizes between about 10 nm and about 1 ¿m and a narrow size distribution were prepared reproducibly by means of a modified glass crystallization method. At annealing temperatures between 560 and 580°C of the amorphous flakes nanocrystalline particles grow. They behave superparamagnetically at room temperature and change into stable magnetic single domains at lower temperatures. The magnetic volume of the powders is considerably less than the geometric one. However, the effective anisotropy fields are larger by a Factor of two to three.

Reheating in inflationary cosmologies: Geometric coupling of the "inflaton" to quantum fields

We propose a simple geometrical prescription for coupling a test quantum scalar field to an "inflaton" (classical scalar field) in the presence of gravity. When the inflaton stems from the compactification of a Kaluza-Klein theory, the prescription leaves no arbitrariness and amounts to a dimensional reduction of the Klein-Gordon equation. We discuss the possible relevance of this coupling to "reheating" in inflationary cosmologies.

A Geometric Characterization of Interpolation in $\hat{\E}^\prime(\R)$

We give a geometric description of the interpolating varieties for the algebra of Fourier transforms of distributions (or Beurling ultradistributions) with compact support on the real line.

Photographic rectification of the graphic documentation of historical and archaeological heritage: The case of the southern facade of the Praetorium tower in Tarragona (Tarraco, Hispania Citerior)

This article details the use of photographic rectification as support for the graphic documentation of historical and archaeological heritage and specifically the southern facade of the Torre del Pretori (Praetorium Tower) in Tarragona. The Praetorium Tower is part of a larger monumental complex and one of the towers that connected different parts of the Tarraco Provincial Forum, the politic-administrative centre of the ancient capital of Hispania Citerioris. It is therefore a valuable example of the evolution of Roman urban architecture. The aim of this project is to provide accurate graphic documentation of the structure to facilitate the restoration and conservation of the tower, as well as to provide a more profound architectural and archaeological understanding of the Roman forum. The use of photographic rectification enabled us to overcome the spatial and time difficulties involved in collecting data caused by the size and location of the building. Specific software made it easier to obtain accurate two-dimensional images. For this reason, in our case, photographic rectification helped us to make a direct analysis of the monument and facilitated interpretation of the architectural stratigraphy. We currently separate the line of research into two concepts: the construction processes and the architecture of the building. The documentation collected permitted various analyses: the characterisation of the building modules, identification of the tools used to work the building materials, etc. In conclusion, the use of orthoimages is a powerful tool that permits the systematic study of a Roman building that has evolved over the centuries and is now in a modern urban context.

A geometric chracterization of the nucleolus of the assignment game

Maschler et al. (1979) caracteritzen geomètricament la intersecció del kernel i del core en els jocs cooperatius, demostrant que les distribucions que pertanyen a ambdós conjunts es troben en el punt mig d’un cert rang de negociació entre parelles de jugadors. En el cas dels jocs d’assignació, aquesta caracterització vol dir que el kernel només conté aquells elements del core on el màxim que un jugador pot transferir a una parella òptima és igual al màxim que aquesta parella li pot transferir, sense sortir-se’n del core. En aquest treball demostrem que el nucleolus d’un joc d’assignació queda caracteritzat si requerim que aquesta propietat de bisecció es compleixi no només per parelles, sinó també per coalicions entre sectors aparellades òptimament.