Development of specific ITS markers for plant DNA identification within herbivorous insects

DNA based techniques have proved to be very useful methods to study trophic relationships 17 between pests and their natural enemies. However, most predators are best defined as omnivores, 18 and the identification of plant-specific DNA should also allow the identification of the plant 19 species the predators have been feeding on. In this study, a PCR approach based on the 20 development of specific primers was developed as a self-marking technique to detect plant DNA 21 within the gut of one heteropteran omnivorous predator (Macrolophus pygmaeus) and two 22 lepidopteran pest species (Helicoverpa armigera and Tuta absoluta). Specific tomato primers 23 were designed from the ITS 1-2 region, which allowed the amplification of a tomato DNA 24 fragment of 332 bp within the three insect species tested in all cases (100% of detection at t = 0) 25 and did not detect DNA of other plants nor of the starved insects. Plant DNA half-lives at 25ºC 26 ranged from 5.8h, to 27.7h and 28.7h within M. pygmaeus, H. armigera and T. absoluta, 27 respectively. Tomato DNA detection within field collected M. pygmaeus suggests dietary mixing 28 in this omnivorous predator and showed a higher detection of tomato DNA in females and 29 nymphs than males. This study provides a useful tool to detect and to identify plant food sources 30 of arthropods and to evaluate crop colonization from surrounding vegetation in conservation 31 biological control programs.

A wolf in sheep"s clothing: carnivory in dominant sea urchins in the Mediterranean

Arbacia lixula and Paracentrotus lividus are the dominant sea urchins in the Mediterranean sublittoral, where they are key structuring species due to their grazing activity. It has been commonly accepted that competition between both species is minimized by specializing in different algal foods. A. lixula is considered to feed mainly on encrusting coralline algae, while P. lividus prefers fleshy macroalgae. We used stable isotope analysis to test if these species occupy different trophic positions at 3 locations in the western Mediterranean and one in Macaronesia. Our results show unambiguously that A. lixula always occupies a higher trophic level than P. lividus, with a δ15N comparable in some locations to strict carnivores such as Actinia schmidti or Marthasterias glacialis. A temporal monitoring at one locality showed that this signature of a higher trophic level is consistent throughout the year. These results are incompatible with the current belief of an herbivorous diet for A. lixula and suggest that it must be considered an omnivore tending to carnivory in Mediterranean ecosystems, feeding at least partially on sessile animals such as Cirripedia, Hydrozoa or Bryozoa. A parallel analysis of gut contents showed a predominance of vegetal items in both species, although A. lixula consistently had a higher abundance of animal components than P. lividus. Our results challenge the validity of using gut content observations alone for characterizing the trophic behaviour of omnivorous marine invertebrates that feed on a variety of food sources with different digestibility.

Polyphenol intake and mortality risk: a re-analysis of the PREDIMED trial

Background: Polyphenols may lower the risk of cardiovascular disease (CVD) and other chronic diseases due to their antioxidant and anti-inflammatory properties, as well as their beneficial effects on blood pressure, lipids and insulin resistance. However, no previous epidemiological studies have evaluated the relationship between the intake of total polyphenols intake and polyphenol subclasses with overall mortality. Our aim was to evaluate whether polyphenol intake is associated with all-cause mortality in subjects at high cardiovascular risk. Methods: We used data from the PREDIMED study, a 7,447-participant, parallel-group, randomized, multicenter, controlled five-year feeding trial aimed at assessing the effects of the Mediterranean Diet in primary prevention of cardiovascular disease. Polyphenol intake was calculated by matching food consumption data from repeated food frequency questionnaires (FFQ) with the Phenol-Explorer database on the polyphenol content of each reported food. Hazard ratios (HR) and 95% confidence intervals (CI) between polyphenol intake and mortality were estimated using time-dependent Cox proportional hazard models. Results: Over an average of 4.8 years of follow-up, we observed 327 deaths. After multivariate adjustment, we found a 37% relative reduction in all-cause mortality comparing the highest versus the lowest quintiles of total polyphenol intake (hazard ratio (HR) = 0.63; 95% CI 0.41 to 0.97; P for trend = 0.12). Among the polyphenol subclasses, stilbenes and lignans were significantly associated with reduced all-cause mortality (HR =0.48; 95% CI 0.25 to 0.91; P for trend = 0.04 and HR = 0.60; 95% CI 0.37 to 0.97; P for trend = 0.03, respectively), with no significant associations apparent in the rest (flavonoids or phenolic acids). Conclusions: Among high-risk subjects, those who reported a high polyphenol intake, especially of stilbenes and lignans, showed a reduced risk of overall mortality compared to those with lower intakes. These results may be useful to determine optimal polyphenol intake or specific food sources of polyphenols that may reduce the risk of all-cause mortality.

Phenol-Explorer 3.0: a major update of the Phenol-Explorer database to incorporate data on the effects of food processing on polyphenol content

Polyphenols are a major class of bioactive phytochemicals whose consumption may play a role in the prevention of a number of chronic diseases such as cardiovascular diseases, type II diabetes and cancers. Phenol-Explorer, launched in 2009, is the only freely available web-based database on the content of polyphenols in food and their in vivo metabolism and pharmacokinetics. Here we report the third release of the database (Phenol-Explorer 3.0), which adds data on the effects of food processing on polyphenol contents in foods. Data on >100 foods, covering 161 polyphenols or groups of polyphenols before and after processing, were collected from 129 peer-reviewed publications and entered into new tables linked to the existing relational design. The effect of processing on polyphenol content is expressed in the form of retention factor coefficients, or the proportion of a given polyphenol retained after processing, adjusted for change in water content. The result is the first database on the effects of food processing on polyphenol content and, following the model initially defined for Phenol-Explorer, all data may be traced back to original sources. The new update will allow polyphenol scientists to more accurately estimate polyphenol exposure from dietary surveys. Database URL: http://www.phenol-explorer.eu

External sources of innovation and industry-university interaction:evidence from Spanish firms

This paper is about the firm innovation process and the cooperation of the innovative firms with other firms and public institutions. A special attention is paid to the cooperation with universities. We use the Technological Innovation Survey (TIS) from the Instituto Nacional de Estadística (Spain) in order to obtain data for 4,159 innovative firms. Our results show that firm's cooperation activities are closely linked to the characteristics of the industry and the firm as well as to the origin of public funds for R&D activities. Key words: Innovation, universities, Spanish economy. JEL code: O31, I20, L60

Sources of Competitiveness in Tourist Local Systems

At the end of the XIX Century, Marshall described the existence of some concentrations of small and medium enterprises specialised in a specific production activity in certain districts of some industrial English cities. Starting from his contribute, Italian scholars have paid particular attention to this local system of production coined by Marshall under the term industrial district. In other countries, different but related territorial models have played a central role as the milieu or the geographical industrial clusters. Recently, these models have been extended to non-industrial fields like culture, rural activities and tourism. In this text, we explore the extension of these territorial models to the study of tourist activities in Italy, using a framework that can be easily applied to other countries or regions. The paper is divided in five sections. In the first one, we propose a review of the territorial models applied to tourism industry. In the second part, we construct a tourist filiere and we apply a methodology for the identification of local systems through GIS tools. Thus, taxonomy of the Italian Tourist Local Systems is presented. In the third part, we discuss about the sources of competitiveness of these Tourist Local Systems. In the forth section, we test a spatial econometrics model regarding different kinds of Italian Tourist Local Systems (rural systems, arts cities, tourist districts) in order to measure external economies and territorial networks. Finally, conclusions and policy implications are exposed.

Milk, from medicine to food Mediterranean Europe: Catalonia, 19th-20th centuries

The spread of milk consumption was a significant change in the diet of Europeans, however it is one that has not been greatly studied with regard to the populations of Mediterranean Europe. In this article we shall analyse the ain circumstances that conditioned that process in Catalonia between the middle of the 19th century and 1936. In our study we shall argue that the consumption of milk in this area was only relevant in the 19th century in situations of illness or old age, and that it subsequently increased and acquired a new significance as a result of various factors. In particular, we shall emphasise: (a) the scientific advances in microbiology and nutrition, (b) the activities carried out by doctors and various public institutions to promote the consumption of fresh milk, and (c) the technological innovations in the milk producing sector. In Appendix 1 we show two maps representing the main territorial references that we shall mention.

Understanding sources of the change in international business cycles

Macroeconomic activity has become less volatile over the past three decades in most G7 economies. Current literature focuses on the characterization of the volatility reduction and explanations for this so called "moderation" in each G7 economy separately. In opposed to individual country analysis and individual variable analysis, this paper focuses on common characteristics of the reduction and common explanations for the moderation in G7 countries. In particular, we study three explanations: structural changes in the economy, changes in common international shocks and changes in domestic shocks. We study these explanations in a unified model structure. To this end, we propose a Bayesian factor structural vector autoregressive model. Using the proposed model, we investigate whether we can find common explanations for all G7 economies when information is pooled from multiple domestic and international sources. Our empirical analysis suggests that volatility reductions can largely be attributed to the decline in the magnitudes of the shocks in most G7 countries while only for the U.K., the U.S. and Italy they can partially be attributed to structural changes in the economy. Analyzing the components of the volatility, we also find that domestic shocks rather than common international shocks can account for a large part of the volatility reduction in most of the G7 countries. Finally, we find that after mid-1980s the structure of the economy changes substantially in five of the G7 countries: Germany, Italy, Japan, the U.K. and the U.S..

Innovation sources and productivity in Catalonian firms: a quantile regression analysis

This paper explores the effects of two main sources of innovation -intramural and external R&D- on the productivity level in a sample of 3,267 Catalonian firms. The data set used is based on the official innovation survey of Catalonia which was a part of the Spanish sample of CIS4, covering the years 2002-2004. We compare empirical results by applying usual OLS and quantile regression techniques both in manufacturing and services industries. In quantile regression, results suggest different patterns at both innovation sources as we move across conditional quantiles. The elasticity of intramural R&D activities on productivity decreased when we move up the high productivity levels both in manufacturing and services sectors, while the effects of external R&D rise in high-technology industries but are more ambiguous in low-technology and knowledge-intensive services. JEL codes: O300, C100, O140. Keywords: Innovation sources, R&D, Productivity, Quantile regression

Innovation sources and productivity: a quantile regression analysis

This paper explores the effects of two main sources of innovation —intramural and external R&D— on the productivity level in a sample of 3,267 Catalan firms. The data set used is based on the official innovation survey of Catalonia which was a part of the Spanish sample of CIS4, covering the years 2002-2004. We compare empirical results by applying usual OLS and quantile regression techniques both in manufacturing and services industries. In quantile regression, results suggest different patterns at both innovation sources as we move across conditional quantiles. The elasticity of intramural R&D activities on productivity decreased when we move up the high productivity levels both in manufacturing and services sectors, while the effects of external R&D rise in high-technology industries but are more ambiguous in low-technology and services industries.

Innovation sources and productivity in Catalonian firms: a quantile regression analysis

This paper explores the effects of two main sources of innovation - intramural and external R&D— on the productivity level in a sample of 3,267 Catalonian firms. The data set used is based on the official innovation survey of Catalonia which was a part of the Spanish sample of CIS4, covering the years 2002-2004. We compare empirical results by applying usual OLS and quantile regression techniques both in manufacturing and services industries. In quantile regression, results suggest different patterns at both innovation sources as we move across conditional quantiles. The elasticity of intramural R&D activities on productivity decreased when we move up the high productivity levels both in manufacturing and services sectors, while the effects of external R&D rise in high-technology industries but are more ambiguous in low-technology and knowledge-intensive services. JEL codes: O300, C100, O140 Keywords: Innovation sources, R&D, Productivity, Quantile Regression

Assessing the quality of alternative energy sources: Energy Return On the Investment (EROI), the metabolic pattern of societies and energy statistics

This paper presents an initial challenge to tackle the every so "tricky" points encountered when dealing with energy accounting, and thereafter illustrates how such a system of accounting can be used when assessing for the metabolic changes in societies. The paper is divided in four main sections. The first three, present a general discussion on the main issues encountered when conducting energy analyses. The last section, subsequently, combines this heuristic approach to the actual formalization of it, in quantitative terms, for the analysis of possible energy scenarios. Section one covers the broader issue of how to account for the relevant categories used when accounting for Joules of energy; emphasizing on the clear distinction between Primary Energy Sources (PES) (which are the physical exploited entities that are used to derive useable energy forms (energy carriers)) and Energy Carriers (EC) (the actual useful energy that is transmitted for the appropriate end uses within a society). Section two sheds light on the concept of Energy Return on Investment (EROI). Here, it is emphasized that, there must already be a certain amount of energy carriers available to be able to extract/exploit Primary Energy Sources to thereafter generate a net supply of energy carriers. It is pointed out that this current trend of intense energy supply has only been possible to the great use and dependence on fossil energy. Section three follows up on the discussion of EROI, indicating that a single numeric indicator such as an output/input ratio is not sufficient in assessing for the performance of energetic systems. Rather an integrated approach that incorporates (i) how big the net supply of Joules of EC can be, given an amount of extracted PES (the external constraints); (ii) how much EC needs to be invested to extract an amount of PES; and (iii) the power level that it takes for both processes to succeed, is underlined. Section four, ultimately, puts the theoretical concepts at play, assessing for how the metabolic performances of societies can be accounted for within this analytical framework.

Consumer populations and nutritional transition in Spain in the 20th century: a methodology for their reconstruction

One feature of the modern nutrition transition is the growing consumption of animal proteins. The most common approach in the quantitative analysis of this change used to be the study of averages of food consumption. But this kind of analysis seems to be incomplete without the knowledge of the number of consumers. Data about consumers are not usually published in historical statistics. This article introduces a methodological approach for reconstructing consumer populations. This methodology is based on some assumptions about the diffusion process of foodstuffs and the modeling of consumption patterns with a log-normal distribution. This estimating process is illustrated with the specific case of milk consumption in Spain between 1925 and 1981. These results fit quite well with other data and indirect sources available showing that this dietary change was a slow and late process. The reconstruction of consumer population could shed a new light in the study of nutritional transitions.