Metal-Nitride-oxide-semiconductor light-emitting devices for general lighting.

The potential for application of silicon nitride-based light sources to general lighting is reported. The mechanism of current injection and transport in silicon nitride layers and silicon oxide tunnel layers is determined by electro-optical characterization of both bi- and tri-layers. It is shown that red luminescence is due to bipolar injection by direct tunneling, whereas Poole-Frenkel ionization is responsible for blue-green emission. The emission appears warm white to the eye, and the technology has potential for large-area lighting devices. A photometric study, including color rendering, color quality and luminous efficacy of radiation, measured under various AC excitation conditions, is given for a spectrum deemed promising for lighting. A correlated color temperature of 4800K was obtained using a 35% duty cycle of the AC excitation signal. Under these conditions, values for general color rendering index of 93 and luminous efficacy of radiation of 112 lm/W are demonstrated. This proof of concept demonstrates that mature silicon technology, which is extendable to lowcost, large-area lamps, can be used for general lighting purposes. Once the external quantum efficiency is improved to exceed 10%, this technique could be competitive with other energy-efficient solid-state lighting options. ©2011 Optical Society of America OCIS codes: (230.2090) Electro-optical devices; (150.2950) Illumination.

Light scattering from suspensions under external gradients

We analyze the light-scattering spectrum of a suspension in a viscoelastic fluid under density and velocity gradients. When a density gradient is present, the dynamic structure factor exhibits universality in the sense that its expression depends only on the reduced frequency and the reduced density gradient. For a velocity gradient, however, the universality breaks down. In this last case we have found a transition point from one to three characteristic frequencies in the spectrum, which is governed by the value of the external gradient. The presence of the viscoelastic time scales introduces a shift in the ``critical¿¿ point.

Staffing strategies in SME's: determinants of external recruitment and internal promotion

The purpose of this paper is to examine the determinants of use internal or external labour market to fill a firm vacancy in SME’s taking into account the differences existing among blue and white collar jobs. Following different theories we can identify three main reasons for use internal candidates rather than external ones‐ firm specific knowledge, adverse selection problems and motivation‐. However, there are others factors that might affect this choice but the last theories don’t take into account. In this paper we try to shed some light on what are these other factors that may affect firm decision to use internal or external labour market. Particularly we analyses the relationship among new technologies, innovation activity and firm location on the staffing strategy. The results shows difference behaviour on the decision to fill a vacancy using internal or external labour markets between manufacturing and service firms, and this decision depends not only on firm internal characteristics, like technological complexity or innovation activity, but also on firm location. The results also support the hypothesis of ports of entry especially in the manufacturing sector.

Bipolar pulsed excitation of erbium-doped nanosilicon light emitting diodes

High quantum efficiency erbium doped silicon nanocluster (Si-NC:Er) light emitting diodes (LEDs) were grown by low-pressure chemical vapor deposition (LPCVD) in a complementary metal-oxide-semiconductor (CMOS) line. Erbium (Er) excitation mechanisms under direct current (DC) and bipolar pulsed electrical injection were studied in a broad range of excitation voltages and frequencies. Under DC excitation, Fowler-Nordheim tunneling of electrons is mediated by Er-related trap states and electroluminescence originates from impact excitation of Er ions. When the bipolar pulsed electrical injection is used, the electron transport and Er excitation mechanism change. Sequential injection of electrons and holes into silicon nanoclusters takes place and nonradiative energy transfer to Er ions is observed. This mechanism occurs in a range of lower driving voltages than those observed in DC and injection frequencies higher than the Er emission rate.

Intense green-yellow electroluminescence from Tb+-implanted silicon-rich silicon nitride/oxide light emitting devices

High optical power density of 0.5 mW/cm2, external quantum efficiency of 0.1%, and population inversion of 7% are reported from Tb+-implanted silicon-rich silicon nitride/oxide light emitting devices. Electrical and electroluminescence mechanisms in these devices were investigated. The excitation cross section for the 543 nm Tb3+ emission was estimated under electrical pumping, resulting in a value of 8.2 × 10−14 cm2, which is one order of magnitude larger than one reported for Tb3+:SiO2 light emitting devices. These results demonstrate the potentiality of Tb+-implanted silicon nitride material for the development of integrated light sources compatible with Si technology.

Internal promotion versus external recruitment: evidence in industrial plants

An analysis is carried out in a sample of 738 industrial plants of the determining factors in the use of internal promotion of blue-collar workers to middle managers and skilled technicians as against their external recruitment. The use of internal promotion is positively correlated with variables indicative of the efforts made by plants to measure employees' skills, and to a lesser extent, with the level of specificity of investments in human capital made by blue-collar workers. Contrary to what was expected, variables related with the use and efficiency of other incentive systems have no significant influence on the increased or decreased use of internal promotion. These results are initial evidence that internal promotions are used to protect and favour specific investments, especially those made by firms in order to discover their workers' skills.

External sources of innovation and industry-university interaction:evidence from Spanish firms

This paper is about the firm innovation process and the cooperation of the innovative firms with other firms and public institutions. A special attention is paid to the cooperation with universities. We use the Technological Innovation Survey (TIS) from the Instituto Nacional de Estadística (Spain) in order to obtain data for 4,159 innovative firms. Our results show that firm's cooperation activities are closely linked to the characteristics of the industry and the firm as well as to the origin of public funds for R&D activities. Key words: Innovation, universities, Spanish economy. JEL code: O31, I20, L60

The European Union Police Mission: The Beginning of a New Future for Bosnia and Herzegovina?

The creation, reform and/or restructuring of the police in post-conflict societies remains one of the key challenges for practitioners and scholars in the contemporary fields of peace and security, particularly due to the changing nature of conflicts. Since the 1990s the world has witnessed a proliferation of international police missions, with regional organisations gradually acquiring a prominent role. This paper analyses the 2003-2005 period of the European Union Police Mission (EUPM) in Bosnia and Herzegovina. Much is at stake in this mission, both in terms of the development of the EU´s external identity but also for Bosnia and Herzegovina’s road to EU membership and sustainable peace. This paper will argue that by 2005 the balance sheet was mixed. EUPM fell short of fulfilling its overall goal of ‘Europeanising’ Bosnian police services, and of its desire to be seen as providing that additional ingredient in police matters that would set it apart from the earlier UN mission. Nevertheless, despite its shortcomings, the Mission did not merit the harsh criticisms it was faced with. Its lack of success was not entirely the Mission’s doing. The paper focuses on three aspects: political and economic viability and sustainability, security levels in Bosnia and Herzegovina, and institution and capacity building. The explanatory framework used in this paper is based on the democratic policing discourse. In doing so the argument developed here will also shed light on the nature of so-called “best European practices” in police matters.

Tomato response to a high light transmission greenhouse film

Increasing greenhouse light transmission has a positive effect not only in Northern latitudes but in Mediterranean countries as well. A greenhouse, H2, with a tetrafluoroethylene copolymer 60 microns film, (Asahi Glass company, Aflex) characterised by its high light transmission and durability was compared to another greenhouse with a co-extruded film considered as a control, H1. Tomato crop response to the increase in light during winter and summer with high temperature and light was evaluated. Light transmission in H2 remained very high in spite of the observed dust accumulation and the low angle of incidence of the winter solar radiation. Transmissivity was clearly higher for H2 (81 to 83 % throughout the season) than in the control (around 63 %). The rest of the climatic parameters were similar in both greenhouses, either in the winter or in the summer evaluations. In spite of the high solar radiation in H2, the summer temperature could be maintained at the desired levels by using evaporative cooling. Accumulated tomato yield and quality was better in the H2 greenhouse (15 % more for the winter crop and 27% more for the summer crop). Fruit size was bigger in the winter crop. As an overall conclusion, the use of high light transmissive films in Mediterranean areas is very convenient for many vegetable crops. This is valid not only in winter but in summer, provided the greenhouse has good ventilation or evaporative cooling to overcome the increase in sensible heat caused by this increase in light..

Analog Modelling of N-S anticlines of the External Sierras (Jaca basin, Southern Pyrenees)

Report for the scientific sojourn carried out at the Uppsala Universitet, Sweden, from April to July the 2007. Two series of analogue models are used to explore ductile-frictional contrasts of the basal décollement in the development of oblique and transverse structures simultaneously to thin-skinned shortening. These models simulate the evolution of the Central External Sierras (Southern Pyrenees, Spain), which constitute the frontal emerging part of the southernmost Pyrenean thrust sheet. They are characterized by the presence of transverse N-S to NW-SE anticlines, which are perpendicular to the Pyrenean structural trend and developed in the hangingwall of the Santo Domingo thrust system, detaching on an unevenly distributed Triassic materials (evaporitic-dolomitic interfingerings). Model setup performs a décollement made by three patches of silicone neighbouring pure brittle sand. Model series A test the thickness ratio between overburden and décollement. Model series B test the width of frictional detachment areas. Model results show how deformation reaches further in areas detached on ductile layer whereas frictional décollement areas assimilate the strain by means of an additional uplift. This replicates the structural style of Central External Sierras: higher structural relief of N-S anticlines with regard to orogen-parallel structures, absence of a representative ductile décollement in the core, tilting towards the orogen and foreland-side closure not thrusted by the frontal emerging South-Pyrenean thrust.

Continuity of set-valued maps revisited in the light of tame geometry

Continuity of set-valued maps is hereby revisited: after recalling some basic concepts of variational analysis and a short description of the State-of-the-Art, we obtain as by-product two Sard type results concerning local minima of scalar and vector valued functions. Our main result though, is inscribed in the framework of tame geometry, stating that a closed-valued semialgebraic set-valued map is almost everywhere continuous (in both topological and measure-theoretic sense). The result –depending on stratification techniques– holds true in a more general setting of o-minimal (or tame) set-valued maps. Some applications are briefly discussed at the end.

Assessing the quality of alternative energy sources: Energy Return On the Investment (EROI), the metabolic pattern of societies and energy statistics

This paper presents an initial challenge to tackle the every so "tricky" points encountered when dealing with energy accounting, and thereafter illustrates how such a system of accounting can be used when assessing for the metabolic changes in societies. The paper is divided in four main sections. The first three, present a general discussion on the main issues encountered when conducting energy analyses. The last section, subsequently, combines this heuristic approach to the actual formalization of it, in quantitative terms, for the analysis of possible energy scenarios. Section one covers the broader issue of how to account for the relevant categories used when accounting for Joules of energy; emphasizing on the clear distinction between Primary Energy Sources (PES) (which are the physical exploited entities that are used to derive useable energy forms (energy carriers)) and Energy Carriers (EC) (the actual useful energy that is transmitted for the appropriate end uses within a society). Section two sheds light on the concept of Energy Return on Investment (EROI). Here, it is emphasized that, there must already be a certain amount of energy carriers available to be able to extract/exploit Primary Energy Sources to thereafter generate a net supply of energy carriers. It is pointed out that this current trend of intense energy supply has only been possible to the great use and dependence on fossil energy. Section three follows up on the discussion of EROI, indicating that a single numeric indicator such as an output/input ratio is not sufficient in assessing for the performance of energetic systems. Rather an integrated approach that incorporates (i) how big the net supply of Joules of EC can be, given an amount of extracted PES (the external constraints); (ii) how much EC needs to be invested to extract an amount of PES; and (iii) the power level that it takes for both processes to succeed, is underlined. Section four, ultimately, puts the theoretical concepts at play, assessing for how the metabolic performances of societies can be accounted for within this analytical framework.

Inflation dynamics and the New Keynesian Phillips curve in EU-4

The paper seeks to shed light on inflation dynamics of four new EU member states: the Czech Republic, Hungary, Poland and Slovakia. To this end, the New Keynesian Phillips curve augmented for open economies is estimated and additional statistical tests applied. We find the following. (1) The claim of New Keynesians that the real marginal cost is the main inflation-forcing variable is fragile. (2) Inflation seems to be driven by external factors. (3) Although inflation holds a forward-looking component, the backward-looking component is substantial. An intuitive explanation for higher inflation persistence may be rather adaptive than rational price setting of local firms.

Internal and External Determinants of Radical and incremental Innovation in SMEs: the case of Catalonia

There is a major concern in economic literature about innovation, which is the interaction between internal and external factors.. In this paper those activities are hypothesized as being determined by some territorial characteristics like labour skills, technological infrastructure, educational facilities, agglomeration economies and industrial structure. This assumption allows understanding why those innovative activities are not spread across space and are located into specific areas. We use a detailed survey containing microdata for 497 SMEs located in Catalonia.