Educational innovation in large groups. Design of an experimental study implemented at the Polytechnic University of Madrid

The present paper shows de design of an experimental study conducted with large groups using educational innovation methodologies at the Polytechnic University of Madrid. Concretely, we have chosen the course titled "History and Politics of Sports" that belongs to the Physical Activity and Sport Science Degree. The selection of this course is because the syllabus is basically theoretical and there are four large groups of freshmen students who do not have previous experiences in a teaching-learning process based on educational innovation. It is hope that the results of this research can be extrapolated to other courses with similar characteristics.

Experimental design on the simplex

Optimum experimental designs depend on the design criterion, the model andthe design region. The talk will consider the design of experiments for regressionmodels in which there is a single response with the explanatory variables lying ina simplex. One example is experiments on various compositions of glass such asthose considered by Martin, Bursnall, and Stillman (2001).Because of the highly symmetric nature of the simplex, the class of models thatare of interest, typically Scheff´e polynomials (Scheff´e 1958) are rather differentfrom those of standard regression analysis. The optimum designs are also ratherdifferent, inheriting a high degree of symmetry from the models.In the talk I will hope to discuss a variety of modes for such experiments. ThenI will discuss constrained mixture experiments, when not all the simplex is availablefor experimentation. Other important aspects include mixture experimentswith extra non-mixture factors and the blocking of mixture experiments.Much of the material is in Chapter 16 of Atkinson, Donev, and Tobias (2007).If time and my research allows, I would hope to finish with a few comments ondesign when the responses, rather than the explanatory variables, lie in a simplex.ReferencesAtkinson, A. C., A. N. Donev, and R. D. Tobias (2007). Optimum ExperimentalDesigns, with SAS. Oxford: Oxford University Press.Martin, R. J., M. C. Bursnall, and E. C. Stillman (2001). Further results onoptimal and efficient designs for constrained mixture experiments. In A. C.Atkinson, B. Bogacka, and A. Zhigljavsky (Eds.), Optimal Design 2000,pp. 225–239. Dordrecht: Kluwer.Scheff´e, H. (1958). Experiments with mixtures. Journal of the Royal StatisticalSociety, Ser. B 20, 344–360.1

Experimental implementation of tightly focused beams with unpolarized transversal component at any plane

The aim of this paper is to provide a formal framework for designing highly focused fields with specific transversal features when the incoming beam is partially polarized. More specifically, we develop a field with a transversal component that remains unpolarized in the focal area. Moreover, its longitudinal component exhibits non-zero values on axis. Special attention is paid to the design of the input beam and the development of the experiment. The implementation of such fields is possible by using an interferometric setup combined with the use of digital holography techniques. Experimental results are compared with those obtained numerically.

On the Rule of Mixtures for Predicting Stress-Softening and Residual Strain Effects in Biological Tissues and Biocompatible Materials

In this work, we use the rule of mixtures to develop an equivalent material model in which the total strain energy density is split into the isotropic part related to the matrix component and the anisotropic energy contribution related to the fiber effects. For the isotropic energy part, we select the amended non-Gaussian strain energy density model, while the energy fiber effects are added by considering the equivalent anisotropic volumetric fraction contribution, as well as the isotropized representation form of the eight-chain energy model that accounts for the material anisotropic effects. Furthermore, our proposed material model uses a phenomenological non-monotonous softening function that predicts stress softening effects and has an energy term, derived from the pseudo-elasticity theory, that accounts for residual strain deformations. The model’s theoretical predictions are compared with experimental data collected from human vaginal tissues, mice skin, poly(glycolide-co-caprolactone) (PGC25 3-0) and polypropylene suture materials and tracheal and brain human tissues. In all cases examined here, our equivalent material model closely follows stress-softening and residual strain effects exhibited by experimental data

On the design of peer punishment experiments

We discuss how technologies of peer punishment might bias the results that are observed in experiments. A crucial parameter is the “fine-to-fee” ratio, which describes by how much the punished subjects income is reduced relatively to the fee the punishing subject has to pay to inflict punishment. We show that a punishment technology commonly used in experiments embeds a variable fine-to-fee ratio and show that it confounds the empirical findings about why, whom, and how much subjects punish.

Experimental investigation of transient natural convection cooling of high prandtl number fluid with variable viscosity

Report for the scientific sojourn at the James Cook University, Australia, between June to December 2007. Free convection in enclosed spaces is found widely in natural and industrial systems. It is a topic of primary interest because in many systems it provides the largest resistance to the heat transfer in comparison with other heat transfer modes. In such systems the convection is driven by a density gradient within the fluid, which, usually, is produced by a temperature difference between the fluid and surrounding walls. In the oil industry, the oil, which has High Prandtl, usually is stored and transported in large tanks at temperatures high enough to keep its viscosity and, thus the pumping requirements, to a reasonable level. A temperature difference between the fluid and the walls of the container may give rise to the unsteady buoyancy force and hence the unsteady natural convection. In the initial period of cooling the natural convection regime dominates over the conduction contribution. As the oil cools down it typically becomes more viscous and this increase of viscosity inhibits the convection. At this point the oil viscosity becomes very large and unloading of the tank becomes very difficult. For this reason it is of primary interest to be able to predict the cooling rate of the oil. The general objective of this work is to develop and validate a simulation tool able to predict the cooling rates of high Prandtl fluid considering the variable viscosity effects.

Experimental exposure of the blue mussel (Mytilus edulis, L.) to the toxic dinoflagellate Alexandrium fundyense: Histopathology, immune responses, and recovery

Mussels (Mytilus edulis) were exposed to cultures of the toxic dinoflagellate Alexandrium fundyense or the non-toxic alga Rhodomonas sp. to evaluate the effects of the harmful alga on the mussels and to study recovery after discontinuation of the A. fundyense exposure. Mussels were exposed for 9 days to the different algae and then all were fed Rhodomonas sp. for 6 more days. Samples of hemolymph for hemocyte analyses and tissues for histology were collected before the exposure and periodically during exposure and recovery periods. Mussels filtered and ingested both microalgal cultures, producing fecal pellets containing degraded, partially degraded, and intact cells of both algae. Mussels exposed to A. fundyense had an inflammatory response consisting of degranulation and diapedesis of hemocytes into the alimentary canal and, as the exposure continued, hemocyte migration into the connective tissue between the gonadal follicles. Evidence of lipid peroxidation, similar to the detoxification pathway described for various xenobiotics, was found; insoluble lipofuchsin granules formed (ceroidosis), and hemocytes carried the granules to the alimentary canal, thus eliminating putative dinoflagellate toxins in feces. As the number of circulating hemocytes in A. fundyense-exposed mussels became depleted, mussels were immunocompromised, and pathological changes followed, i.e., increased prevalences of ceroidosis and trematodes after 9 days of exposure. Moreover, the total number of pathological changes increased from the beginning of the exposure until the last day (day 9). After 6 days of the exposure, mussels in one of the three tanks exposed to A. fundyense mass spawned; these mussels showed more severe effects of the toxic algae than non-spawning mussels exposed to A. fundyense. No significant differences were found between the two treatments during the recovery period, indicating rapid homeostatic processes in tissues and circulating hemocytes.

Design of Novel Frequency Generation Circuit with Application to Ultra-Wideband Distributed Oscillators

Given the urgence of a new paradigm in wireless digital trasmission which should allow for higher bit rate, lower latency and tigher delay constaints, it has been proposed to investigate the fundamental building blocks that at the circuital/device level, will boost the change towards a more efficient network architecture, with high capacity, higher bandwidth and a more satisfactory end user experience. At the core of each transciever, there are inherently analog devices capable of providing the carrier signal, the oscillators. It is strongly believed that many limitations in today's communication protocols, could be relieved by permitting high carrier frequency radio transmission, and having some degree of reconfigurability. This led us to studying distributed oscillator architectures which work in the microwave range and possess wideband tuning capability. As microvave oscillators are essentially nonlinear devices, a full nonlinear analyis, synthesis, and optimization had to be considered for their implementation. Consequently, all the most used nonlinear numerical techniques in commercial EDA software had been reviewed. An application of all the aforementioned techniques has been shown, considering a systems of three coupled oscillator ("triple push" oscillator) in which the stability of the various oscillating modes has been studied. Provided that a certain phase distribution is maintained among the oscillating elements, this topology permits a rise in the output power of the third harmonic; nevertheless due to circuit simmetry, "unwanted" oscillating modes coexist with the intenteded one. Starting with the necessary background on distributed amplification and distributed oscillator theory, the design of a four stage reverse mode distributed voltage controlled oscillator (DVCO) using lumped elments has been presented. All the design steps have been reported and for the first time a method for an optimized design with reduced variations in the output power has been presented. Ongoing work is devoted to model a wideband DVCO and to implement a frequency divider.

A Tool for optimum design of Waste Water Treatment Plants under uncertainty

L’objectiu principal és presentar un nou prototipus d’eina per al disseny de les plantes de tractament d’aigües residuals utilitzant models mecànics dinàmics quantificant la incertesa

Analysis and Design of a secure WLAN solution for Cobre Las Cruces

Cobre Las Cruces is a renowned copper mining company located in Sevilla, with unexpected problems in wireless communications that have a direct affectation in production. Therefore, the main goals are to improve the WiFi infrastructure, to secure it and to detect and prevent from attacks and from the installation of rogue (and non-authorized) APs. All of that integrated with the current ICT infrastructure.This project has been divided into four phases, although only two of them have been included into the TFC; they are the analysis of the current situation and the design of a WLAN solution.Once the analysis part was finished, some weaknesses were detected. Subjects such as lack of connectivity and control, ignorance about installed WiFi devices and their localization and state and, by and large, the use of weak security mechanisms were some of the problems found. Additionally, due to the fact that the working area became larger and new WiFi infrastructures were added, the first phase took more time than expected.As a result of the detailed analysis, some goals were defined to solve and it was designed a centralized approach able to cope with them. A solution based on 802.11i and 802.1x protocols, digital certificates, a probe system running as IDS/IPS and ligthweight APs in conjunction with a Wireless LAN Controller are the main features.

An experimental study of adaptive behavior in an oligopolistic market game

We consider an oligopolistic market game, in which the players are competing firm in the same market of a homogeneous consumption good. The consumer side is represented by a fixed demand function. The firms decide how much to produce of a perishable consumption good, and they decide upon a number of information signals to be sent into the population in order to attract customers. Due to the minimal information provided, the players do not have a well--specified model of their environment. Our main objective is to characterize the adaptive behavior of the players in such a situation.

An experimental test of loss aversion and scale compatibility

This paper studies two important reasons why people violate procedure invariance, loss aversion and scale compatibility. The paper extends previous research on loss aversion and scale compatibility by studying loss aversion and scale compatibility simultaneously, by looking at a new decision domain, medical decision analysis, and by examining the effect of loss aversion and scale compatibility on "well-contemplated preferences." We find significant evidence both of loss aversion and scale compatibility. However, the sizes of the biases due to loss aversion and scale compatibility vary over trade-offs and most participants do not behave consistently according to loss aversion or scale compatibility. In particular, the effect of loss aversion in medical trade-offs decreases with duration. These findings are encouraging for utility measurement and prescriptive decision analysis. There appear to exist decision contexts in which the effects of loss aversion and scale compatibility can be minimized and utilities can be measured that do not suffer from these distorting factors.

The provision of relative performance feedback information: An experimental analysis of performance and happiness

This paper studies the effect of providing relative performance feedback information onindividual performance and on individual affective response, when agents are rewardedaccording to their absolute performance. In a laboratory set-up, agents perform a realeffort task and when receiving feedback, they are asked to rate their happiness, arousaland feeling of dominance. Control subjects learn only their absolute performance, whilethe treated subjects additionally learn the average performance in the session.Performance is 17 percent higher when relative performance feedback is provided.Furthermore, although feedback increases the performance independent of the content(i.e., performing above or below the average), the content is determinant for theaffective response. When subjects are treated, the inequality in the happiness and thefeeling of dominance between those subjects performing above and below the averageincreases by 8 and 6 percentage points, respectively.