Avaluació ambiental de la recollida de residus municipals de Sant Boi de Llobregat

La gestió dels residus municipals ha d’avançar cap a la sostenibilitat per tal de poder fer front al gran volum de residus que es generen actualment i no malmetre el medi ambient. Aquest fet motiva a l’elaboració d’aquest projecte que es centra en l’anàlisi del procés de recollida dels residus municipals. L’estudi realitza en primer lloc una avaluació ambiental de la recollida global i una avaluació ambiental específica de la recollida de la fracció Resta mitjançant el programari SIMUR (desenvolupada per l’Agència d’Ecologia Urbana de Barcelona). Amb aquesta eina de simulació de models de gestió de residus municipal es calcula el balanç de massa, el balanç energètic, el balanç d’emissions i el balanç econòmic del procés de recollida. La metodologia per al desenvolupament de la segona fase del projecte es basa en la realització de treball de camp per al disseny de taules descriptives dels circuits de recollida de la fracció Resta, que permeten comparar-los entre sí i aconseguir l’objectiu d’avaluar l’eficiència dels sistemes de recollida de càrrega lateral i posterior de la fracció. L’assoliment dels objectius permet fer-se una idea de l’estat actual de la recollida dels residus de Sant Boi, identificant-ne els punts forts i febles i plantejant propostes de millora encarades a aconseguir una futura generació i recollida de residus més respectuosa amb l’entorn.

Alternativas tecnológicas para la recuperación y valorización del nitrógeno presente en los residuos orgánicos

La conciencia de los problemas asociados a la gestión de los residuos orgánicos y el interés por las oportunidades de su recuperación y valorización han ido tomando importancia en los últimos años, tanto en el campo de las deyecciones ganaderas como en el sector de las aguas residuales. Consecuentemente, las combinaciones tecnológicas que permitan cerrar los ciclos de los nutrientes y la recuperación energética han adquirido mayor importancia en la investigación así como en las nuevas normativas sectoriales. En este contexto se sitúa el trabajo realizado durante el periodo becado (octubre 2010 - noviembre 2011). En una primera etapa de estudio bibliográfico se identificaron i) el aumento de la eficiencia en el uso del nitrógeno en la agricultura y en la ganadería, ii) la reutilización del nitrógeno en los mismos ecosistemas agrícolas y iii) el tratamiento de las deyecciones para redistribuir el nitrógeno a zonas con poca disponibilidad, como las tres direcciones principales hacia las cuales se está focalizando el interés del sector agrícola. Se puso en marcha una planta piloto de stripping y absorción para estudiar la posibilidad de recuperar y valorizar el amoniaco presente en los purines en forma de solución amoniacal para la industria de fertilizantes. Los resultados obtenidos evidenciaron el rol fundamental de las características iníciales del substrato en el rendimiento global del proceso. En particular, elevados contenidos en materia orgánica resultaron en bajas eficiencias y en elevadas contaminaciones del producto obtenido. Finalmente, considerando sus potenciales ventajas tanto en la gestión de los residuos ganaderos como de las aguas residuales y focalizándose en las perdidas de nitrógeno se estudió un sistema descentralizado de separación de orina instalado en un centro de investigación. Los resultados preliminares permitieron caracterizar los principales procesos que ocurren en el sistema e identificar las posibles líneas futuras de investigación.

Monitoring switch-type sensors and powering autonomous sensors via inductive coupling: application to removable seats in vehicles

Aquesta tesi explora la possibilitat de fer servir enllaços inductius per a una aplicació de l’automòbil on el cablejat entre la centraleta (ECU) i els sensors o detectors és difícil o impossible. S’han proposat dos mètodes: 1) el monitoratge de sensors commutats (dos possibles estats) via acoblament inductiu i 2) la transmissió mitjançant el mateix principi físic de la potència necessària per alimentar els sensors autònoms remots. La detecció d'ocupació i del cinturó de seguretat per a seients desmuntables pot ser implementada amb sistemes sense fils passius basats en circuits ressonants de tipus LC on l'estat dels sensors determina el valor del condensador i, per tant, la freqüència de ressonància. Els canvis en la freqüència són detectats per una bobina situada en el terra del vehicle. S’ha conseguit provar el sistema en un marge entre 0.5 cm i 3 cm. Els experiments s’han dut a terme fent servir un analitzador d’impedàncies connectat a una bobina primària i sensors comercials connectats a un circuit remot. La segona proposta consisteix en transmetre remotament la potència des d’una bobina situada en el terra del vehicle cap a un dispositiu autònom situat en el seient. Aquest dispositiu monitorarà l'estat dels detectors (d'ocupació i de cinturó) i transmetrà les dades mitjançant un transceptor comercial de radiofreqüència o pel mateix enllaç inductiu. S’han avaluat les bobines necessàries per a una freqüència de treball inferior a 150 kHz i s’ha estudiat quin és el regulador de tensió més apropiat per tal d’aconseguir una eficiència global màxima. Quatre tipus de reguladors de tensió s’han analitzat i comparat des del punt de vista de l’eficiència de potència. Els reguladors de tensió de tipus lineal shunt proporcionen una eficiència de potència millor que les altres alternatives, els lineals sèrie i els commutats buck o boost. Les eficiències aconseguides han estat al voltant del 40%, 25% i 10% per les bobines a distàncies 1cm, 1.5cm, i 2cm. Les proves experimentals han mostrat que els sensors autònoms han estat correctament alimentats fins a distàncies de 2.5cm.

Economic and environmental effects of the CO2 taxation: an input-output analysis for Spain

CO2 emissions induced by human activities are the major cause of climate change; hence, strong environmental policy that limits the growing dependence on fossil fuel is indispensable. Tradable permits and environmental taxes are the usual tools used in CO2 reduction strategies. Such economic tools provide incentives to polluting industries to reduce their emissions through market signals. The aim of this work is to investigate the direct and indirect effects of an environmental tax on Spanish products and services. We apply an environmentally extended input-output (EIO) model to identify CO2 emission intensities of products and services and, accordingly, we estimate the tax proportional to these intensities. The short-term price effects are analyzed using an input-output price model. The effect of tax introduction on consumption prices and its influence on consumers’ welfare are determined. We also quantify the environmental impacts of such taxation in terms of the reduction in CO2 emissions. The results, based on the Spanish economy for the year 2007, show that sectors with relatively poor environmental profile are subjected to high environmental tax rates. And consequently, applying a CO2 tax on these sectors, increases production prices and induces a slight increase in consumer price index and a decrease in private welfare. The revenue from the tax could be used to counter balance the negative effects on social welfare and also to stimulate the increase of renewable energy shares in the most impacting sectors. Finally, our analysis highlights that the environmental and economic goals cannot be met at the same time with the environmental taxation and this shows the necessity of finding other (complementary or alternative) measures to ensure both the economic and ecological efficiencies. Keywords: CO2 emissions; environmental tax; input-output model, effects of environmental taxation.

Consumption of macrophytes by invertebrates in Tancada lagoon (NE Spain)

Gammarus aequicauda and Sphaeroma hookeri are the most abundant macroinvertebrates on Ruppia cirrhosa (1275 and 1290 individuals.m-2) and Potamogeton pectinatus (140 and 680 individuals. m-2) in Tancada lagoon, a Mediterranean coastal lagoon in the Ebro Delta (NE Spain). Consumption and assimilation efficiencies were calculated from bell jar experiments. Gammarus grazing effects are higher than Sphaeroma on both Ruppia cirrhosa and Potamogeton pectinatus. Green Ruppia leaves lost 0.3 mg per mg Gammarus per day, while Potamogeton leaves lost 0.2 mg per mg Gammarus per day. Decomposing Ruppia leaves lost 0.35-0.54 mg per mg Gammarus per day. Losses of weight by both Ruppia and Potamogeton due to Sphaeroma feeding were less than half those by Gammarus. Assimilation efficiencies are higher for Gammarus (44-78% feeding on Ruppia 2% feeding on Potamogeton) than for Sphaeroma (26-48%) feeding on Ruppia). These assimilation efficiencies were higher than those reported by other authors working at higher latitudes perhaps because of the higher temperature under which the experiments were carried out.

Efficiency of informational transfer in regular and complex networks

We analyze the process of informational exchange through complex networks by measuring network efficiencies. Aiming to study nonclustered systems, we propose a modification of this measure on the local level. We apply this method to an extension of the class of small worlds that includes declustered networks and show that they are locally quite efficient, although their clustering coefficient is practically zero. Unweighted systems with small-world and scale-free topologies are shown to be both globally and locally efficient. Our method is also applied to characterize weighted networks. In particular we examine the properties of underground transportation systems of Madrid and Barcelona and reinterpret the results obtained for the Boston subway network.

Consumption of macrophytes by invertebrates in Tancada lagoon (NE Spain)

Gammarus aequicauda and Sphaeroma hookeri are the most abundant macroinvertebrates on Ruppia cirrhosa (1275 and 1290 individuals.m-2) and Potamogeton pectinatus (140 and 680 individuals. m-2) in Tancada lagoon, a Mediterranean coastal lagoon in the Ebro Delta (NE Spain). Consumption and assimilation efficiencies were calculated from bell jar experiments. Gammarus grazing effects are higher than Sphaeroma on both Ruppia cirrhosa and Potamogeton pectinatus. Green Ruppia leaves lost 0.3 mg per mg Gammarus per day, while Potamogeton leaves lost 0.2 mg per mg Gammarus per day. Decomposing Ruppia leaves lost 0.35-0.54 mg per mg Gammarus per day. Losses of weight by both Ruppia and Potamogeton due to Sphaeroma feeding were less than half those by Gammarus. Assimilation efficiencies are higher for Gammarus (44-78% feeding on Ruppia 2% feeding on Potamogeton) than for Sphaeroma (26-48%) feeding on Ruppia). These assimilation efficiencies were higher than those reported by other authors working at higher latitudes perhaps because of the higher temperature under which the experiments were carried out.

Evolución estacional de δ13C en hojas y madera de dos quercíneas mediterráneas concurrentes (Quercus ilex subps. ballota L. y Quercus faginea Lam.): dinámica de la eficiencia en uso del agua

En el ámbito mediterráneo es frecuente la concurrencia en un mismo hábitat de especies perennifolias y caducifolias como Quercus ilex y Q. faginea. En este estudio se pretende analizar la diferencia en la respuesta ecofisiológica de las dos especies frente a la variación climática estacional mediante la composición isotópica de carbono de la materia orgánica soluble de las hojas (δ13Ch) y de la α-celulosa de la madera (δ13Cm). Se observaron patrones intraanuales dependientes de la especie en la δ13Ch. Por un lado, Q. faginea utiliza reservas de almidón como fuente de carbono para producir nuevas hojas a principios de abril, dando lugar a valores altos de δ13Ch. Por otro, Q. ilex utiliza asimilados recientes de las hojas formadas el año anterior (aún funcionales). No obstante, los valores globales de δ13Ch en ambas especies son similares (-25,4±0,55 y -25,5±0,89, para Q. faginea y Q. ilex, respectivamente), lo que apunta a valores equivalentes de eficiencia intrínseca en el uso del agua. Como en las hojas, la δ13Cm de Q. faginea reflejó claramente el uso de reservas en la madera temprana. Tanto la δ13Ch como la δ13Cm de las dos especies registran ajustes como respuesta a las variaciones ambientales estacionales. No obstante, y como parámetro integrador de eficiencia hídrica, la menor amplitud de las variaciones en la δ13Cm de Q. ilex sugiere una menor sensibilidad de esta especie frente a las fluctuaciones climáticas, lo que puede otorgarle cierta ventaja competitiva bajo condiciones de incremento progresivo de aridez.

Progress in a-Si:H/c-Si heterojunction emitters obtained by Hot-Wire CVD at 200°C

In this work, we investigate heterojunction emitters deposited by Hot-Wire CVD on p-type crystalline silicon. The emitter structure consists of an n-doped film (20 nm) combined with a thin intrinsic hydrogenated amorphous silicon buffer layer (5 nm). The microstructure of these films has been studied by spectroscopic ellipsometry in the UV-visible range. These measurements reveal that the microstructure of the n-doped film is strongly influenced by the amorphous silicon buffer. The Quasy-Steady-State Photoconductance (QSS-PC) technique allows us to estimate implicit open-circuit voltages near 700 mV for heterojunction emitters on p-type (0.8 Ω·cm) FZ silicon wafers. Finally, 1 cm 2 heterojunction solar cells with 15.4% conversion efficiencies (total area) have been fabricated on flat p-type (14 Ω·cm) CZ silicon wafers with aluminum back-surface-field contact.

ZnO nanorods for efficient third harmonic UV generation.

ZnO nanorods grown by both high temperature vapour phase transport and low temperature chemical bath deposition are very promising sources for UV third harmonic generation. Material grown by both methods show comparable efficiencies, in both cases an order of magnitude higher than surface third harmonic generation at the quartz-air interface of a bare quartz substrate. This result is in stark contrast to the linear optical properties of ZnO nanorods grown by these two methods, which show vastly different PL efficiencies. The third harmonic generated signal is analysed using intensity dependent measurements and interferometric frequency resolved optical gating, allowing extraction of the laser pulse parameters. The comparable levels of efficiency of ZnO grown by these very different methods as sources for third harmonic UV generation provides a broad suite of possible growth methods to suit various substrates, coverage and scalability requirements. Potential application areas range from interferometric frequency resolved optical gating characterization of few cycle fs pulses to single cell UV irradiation for biophysical studies.

Occurrence of inorganic arsenic in edible Shiitake (Lentinula edodes) products

The present study reports arsenic speciation analysis in edible Shiitake (Lentinula edodes) products. The study focused on the extraction, and accurate quantification of inorganic arsenic (iAs), the most toxic form of arsenic, which was selectively separated and determined using anion exchange LC-ICPMS. A wide variety of edible Shiitake products (fresh mushrooms, food supplements, canned and dehydrated) were purchased and analysed. A cultivated Shiitake grown under controlled conditions was also analysed. The extraction method showed satisfactory extraction efficiencies (>90%) and column recoveries (>85%) for all samples. Arsenic speciation revealed that iAs was the major As compound up to 1.38 mg As per kg dm (with a mean percentage of 84% of the total arsenic) and other organoarsenicals were found as minor species. Shiitake products had high proportions of iAs and therefore should not be ignored as potential contributors to dietary iAs exposure in populations with a high intake of Shiitake products.

Progress in single junction microcrystalline silicon solar cells deposited by Hot-Wire CVD

Hot-Wire Chemical Vapor Deposition has led to microcrystalline silicon solar cell efficiencies similar to those obtained with Plasma Enhanced CVD. The light-induced degradation behavior of microcrystalline silicon solar cells critically depends on the properties of their active layer. In the regime close to the transition to amorphous growth (around 60% of amorphous volume fraction), cells incorporating an intrinsic layer with slightly higher crystalline fraction and [220] preferential orientation are stable after more than 7000 h of AM1.5 light soaking. On the contrary, solar cells whose intrinsic layer has a slightly lower crystalline fraction and random or [111] preferential orientation exhibit clear light-induced degradation effects. A revision of the efficiencies of Hot-Wire deposited microcrystalline silicon solar cells is presented and the potential efficiency of this technology is also evaluated.

Treatment of micropollutants in municipal wastewater: study of a sequential batch biofilter

All the experimental part of this final project was done at Laboratoire de Biotechnologie Environnementale (LBE) from the École Polytechnique Fédérale de Lausanne (EPFL), Switzerland, during 6 months (November 2013- May 2014). A fungal biofilter composed of woodchips was designed in order to remove micropollutants from the effluents of waste water treatment plants. Two fungi were tested: Pleurotus ostreatus and Trametes versicolor in order to evaluate their efficiency for the removal of two micropollutants: the anti-inflammatory drug naproxen and the antibiotic sulfamethoxazole,. Although Trametes versicolor was able to degrade quickly naproxen, this fungus was not any more active after one week of operation in the filter. Pleurotus ostreatus was, on contrary, able to survive more than 3 months in the filter, showing good removal efficiencies of naproxen and sulfamethoxazole during all this period, in tap water but also in real treated municipal wastewater. Several other experiments have provided insight on the removal mechanisms of these micropollutants in the fungal biofilter (degradation and adsorption) and also allowed to model the removal trend. Fungal treatment with Pleurotus ostreatus grown on wood substrates appeared to be a promising solution to improve micropollutants removal in wastewater.

Modelling nitrogen and phosphorus loads in a Mediterranean river catchment (La Tordera, NE Spain)

Human activities have resulted in increased nutrient levels in many rivers all over Europe. Sustainable management of river basins demands an assessment of the causes and consequences of human alteration of nutrient flows, together with an evaluation of management options. In the context of an integrated and interdisciplinary environmental assessment (IEA) of nutrient flows, we present and discuss the application of the nutrient emission model MONERIS (MOdelling Nutrient Emissions into River Systems) to the Catalan river basin, La Tordera (north-east Spain), for the period 1996–2002. After a successful calibration and verification process (Nash-Sutcliffe efficiencies E=0.85 for phosphorus and E=0.86 for nitrogen), the application of the model MONERIS proved to be useful in estimating nutrient loads. Crucial for model calibration, in-stream retention was estimated to be about 50 % of nutrient emissions on an annual basis. Through this process, we identified the importance of point sources for phosphorus emissions (about 94% for 1996–2002), and diffuse sources, especially inputs via groundwater, for nitrogen emissions (about 31% for 1996–2002). Despite hurdles related to model structure, observed loads, and input data encountered during the modelling process, MONERIS provided a good representation of the major interannual and spatial patterns in nutrient emissions. An analysis of the model uncertainty and sensitivity to input data indicates that the model MONERIS, even in data-starved Mediterranean catchments, may be profitably used by water managers for evaluating quantitative nutrient emission scenarios for the purpose of managing river basins. As an example of scenario modelling, an analysis of the changes in nutrient emissions through two different future scenarios allowed the identification of a set of relevant measures to reduce nutrient loads.

Pharmaceuticals occurrence in a WWTP with significant industrial contribution and its input into the river system

Occurrence and removal of 81 representative Pharmaceutical Active Compounds (PhACs) were assessed in a municipal WWTP located in a highly industrialized area, with partial water reuse after UV tertiary treatment and discharge to a Mediterranean river. Water monitoring was performed in an integrated way at different points in the WWTP and river along three seasons. Consistent differences between therapeutic classes were observed in terms of influent concentration, removal efficiencies and seasonal variation. Conventional (primary and secondary) treatment was unable to completely remove numerous compounds and UV-based tertiary treatment played a complementary role for some of them. Industrial activity influence was highlighted in terms of PhACs presence and seasonal distribution. Even if global WWTP effluent impact on the studied river appeared to be minor, PhACs resulted widespread pollutants in river waters. Contamination can be particularly critical in summer in water scarcity areas, when water flow decreases considerably