Economic structure and key sectors analysis of greenhouse gas emissions in Uruguay

This paper identifies the key sectors in greenhouse gas emissions of the Uruguayan economy through input-output analysis. This allows to precisely determine the role played by the different productive sectors and their relationship with other sectors in the relation between the Uruguayan productive structure and atmospheric pollution. In order to guide policy design for GHG reduction, we decompose sectors liability between the pollution generated through their own production processes and the pollution indirectly generated in the production processes of other sectors. The results show that all the key polluting sectors for the different contaminants considered are relevant because of their own emissions, except for the sector Motor vehicles and oil retail trade, which is relevant in CO2 emissions because of its pure, both backward and forward, linkages. Finally, the best policy channels for controlling and reducing GHGs emissions are identified, and compared with the National Climate Change Response Plan (NCCRP) lines of action.

Linear transceiver design in nonregenerative relays with channel state information

This paper deals with the design of nonregenerativerelaying transceivers in cooperative systems where channel stateinformation (CSI) is available at the relay station. The conventionalnonregenerative approach is the amplify and forward(A&F) approach, where the signal received at the relay is simplyamplified and retransmitted. In this paper, we propose an alternativelinear transceiver design for nonregenerative relaying(including pure relaying and the cooperative transmission cases),making proper use of CSI at the relay station. Specifically, wedesign the optimum linear filtering performed on the data to beforwarded at the relay. As optimization criteria, we have consideredthe maximization of mutual information (that provides aninformation rate for which reliable communication is possible) fora given available transmission power at the relay station. Threedifferent levels of CSI can be considered at the relay station: onlyfirst hop channel information (between the source and relay);first hop channel and second hop channel (between relay anddestination) information, or a third situation where the relaymay have complete cooperative channel information includingall the links: first and second hop channels and also the directchannel between source and destination. Despite the latter beinga more unrealistic situation, since it requires the destination toinform the relay station about the direct channel, it is useful as anupper benchmark. In this paper, we consider the last two casesrelating to CSI.We compare the performance so obtained with theperformance for the conventional A&F approach, and also withthe performance of regenerative relays and direct noncooperativetransmission for two particular cases: narrowband multiple-inputmultiple-output transceivers and wideband single input singleoutput orthogonal frequency division multiplex transmissions.

Forward induction and the excess capacity puzzle: An experimental investigation.

While the theoretical industrial organization literature has long argued that excess capacity can be used to deter entry into markets, there is little empirical evidence that incumbent firms effectively behave in this way. Bagwell and Ramey (1996) propose a game with a specific sequence of moves and partially-recoverable capacity costs in which forward induction provides a theoretical rationalization for firm behavior in the field. We conduct an experiment with a game inspired by their work. In our data the incumbent tends to keep the market, in contrast to what the forward induction argument of Bagwell and Ramey would suggest. The results indicate that players perceive that the first mover has an advantage without having to pre-commit capacity. In our game, evolution and learning do not drive out this perception. We back these claims with data analysis, a theoretical framework for dynamics, and simulation results.

The New EU’s External Action: A significant step forward towards the EU’s single voice?ction problems and rhetorical action

The aim of this paper is to analyse the main agreements on the EU’s External Action agreed within the European Convention and the IGC taking into account why, how and who reached the consensus on them. In other words, this paper will explore the principles followed in order to improve the instruments of the EU’s External Action such as authority, coherence, visibility, efficiency and credibility.

On forward induction and evolutionary and strategic stability

We analyze which normal form solution concepts capture the notion offorward induction, as defined by van Damme (JET, 1989) in the classof generic two player normal form games preceded by an outsideoption. We find that none of the known strategic stability concepts(including Mertens stable sets and hyperstable sets) captures this form of forward induction. On the other hand, we show that the evolutionary concept of EES set (Swinkels, JET, 1992) is always consistent with forward induction.

Pitfalls in the modeling of forward-looking price setting and investment decisions

The present paper makes progress in explaining the role of capital for inflation and output dynamics. We followWoodford (2003, Ch. 5) in assuming Calvo pricing combined with a convex capital adjustment cost at the firm level. Our main result is that capital accumulation affects inflation dynamics primarily through its impact on the marginal cost. This mechanism is much simpler than the one implied by the analysis in Woodford's text. The reason is that his analysis suffers from a conceptual mistake, as we show. The latter obscures the economic mechanism through which capital affects inflation and output dynamics in the Calvo model, as discussed in Woodford (2004).

Forward induction and the excess capacity puzzle: An experimental investigation

While the theoretical industrial organization literature has long arguedthat excess capacity can be used to deter entry into markets, there islittle empirical evidence that incumbent firms effectively behave in thisway. Bagwell and Ramey (1996) propose a game with a specific sequence ofmoves and partially-recoverable capacity costs in which forward inductionprovides a theoretical rationalization for firm behavior in the field. Weconduct an experiment with a game inspired by their work. In our data theincumbent tends to keep the market, in contrast to what the forwardinduction argument of Bagwell and Ramey would suggest. The results indicatethat players perceive that the first mover has an advantage without havingto pre-commit capacity. In our game, evolution and learning do not driveout this perception. We back these claims with data analysis, atheoretical framework for dynamics, and simulation results.

SIMSAFADIM-CLASTIC: A new approach to mathematical 3D forward simulation modelling for terrigenous and carbonate marine sedimentation

Most sedimentary modelling programs developed in recent years focus on either terrigenous or carbonate marine sedimentation. Nevertheless, only a few programs have attempted to consider mixed terrigenous-carbonate sedimentation, and most of these are two-dimensional, which is a major restriction since geological processes take place in 3D. This paper presents the basic concepts of a new 3D mathematical forward simulation model for clastic sediments, which was developed from SIMSAFADIM, a previous 3D carbonate sedimentation model. The new extended model, SIMSAFADIM-CLASTIC, simulates processes of autochthonous marine carbonate production and accumulation, together with clastic transport and sedimentation in three dimensions of both carbonate and terrigenous sediments. Other models and modelling strategies may also provide realistic and efficient tools for prediction of stratigraphic architecture and facies distribution of sedimentary deposits. However, SIMSAFADIM-CLASTIC becomes an innovative model that attempts to simulate different sediment types using a process-based approach, therefore being a useful tool for 3D prediction of stratigraphic architecture and facies distribution in sedimentary basins. This model is applied to the neogene Vallès-Penedès half-graben (western Mediterranean, NE Spain) to show the capacity of the program when applied to a realistic geologic situation involving interactions between terrigenous clastics and carbonate sediments.

Film-free laser forward printing of transparent and weakly absorbing liquids

A laser-based technique for printing transparent and weakly absorbing liquids is developed. Its principle of operation relies in the tight focusing of short laser pulses inside the liquid and close to its free surface, in such a way that the laser radiation is absorbed in a tiny volume around the beam waist, with practically no absorption in any other location along the beam path. If the absorbed energy overcomes the optical breakdown threshold, a cavitation bubble is generated, and its expansion results in the propulsion of a small fraction of liquid which can be collected on a substrate, leading to the printing of a microdroplet for each laser pulse. The technique does not require the preparation of the liquid in thin film form, and its forward mode of operation imposes no restriction concerning the optical properties of the substrate. These characteristics make it well suited for printing a wide variety of materials of interest in diverse applications. We demonstrate that the film-free laser forward printing technique is capable of printing microdroplets with good resolution, reproducibility and control, and analyze the influence of the main process parameter, laser pulse energy. The mechanisms of liquid printing are also investigated: time-resolved imaging provides a clear picture of the dynamics of liquid transfer which allows understanding the main features observed in the printed droplets.

SIMSAFADIM-CLASTIC: A new approach to mathematical 3D forward simulation modelling for terrigenous and carbonate marine sedimentation

Most sedimentary modelling programs developed in recent years focus on either terrigenous or carbonate marine sedimentation. Nevertheless, only a few programs have attempted to consider mixed terrigenous-carbonate sedimentation, and most of these are two-dimensional, which is a major restriction since geological processes take place in 3D. This paper presents the basic concepts of a new 3D mathematical forward simulation model for clastic sediments, which was developed from SIMSAFADIM, a previous 3D carbonate sedimentation model. The new extended model, SIMSAFADIM-CLASTIC, simulates processes of autochthonous marine carbonate production and accumulation, together with clastic transport and sedimentation in three dimensions of both carbonate and terrigenous sediments. Other models and modelling strategies may also provide realistic and efficient tools for prediction of stratigraphic architecture and facies distribution of sedimentary deposits. However, SIMSAFADIM-CLASTIC becomes an innovative model that attempts to simulate different sediment types using a process-based approach, therefore being a useful tool for 3D prediction of stratigraphic architecture and facies distribution in sedimentary basins. This model is applied to the neogene Vallès-Penedès half-graben (western Mediterranean, NE Spain) to show the capacity of the program when applied to a realistic geologic situation involving interactions between terrigenous clastics and carbonate sediments.

Hybrid turbo FEC/ARQ systems and distributed space-time coding for cooperative transmission

Cooperative transmission can be seen as a "virtual" MIMO system, where themultiple transmit antennas are in fact implemented distributed by the antennas both at the source and the relay terminal. Depending on the system design, diversity/multiplexing gainsare achievable. This design involves the definition of the type of retransmission (incrementalredundancy, repetition coding), the design of the distributed space-time codes, the errorcorrecting scheme, the operation of the relay (decode&forward or amplify&forward) and thenumber of antennas at each terminal. Proposed schemes are evaluated in different conditionsin combination with forward error correcting codes (FEC), both for linear and near-optimum(sphere decoder) receivers, for its possible implementation in downlink high speed packetservices of cellular networks. Results show the benefits of coded cooperation over directtransmission in terms of increased throughput. It is shown that multiplexing gains areobserved even if the mobile station features a single antenna, provided that cell wide reuse of the relay radio resource is possible.

Socially anxious and confident men interact with a forward virtual woman: an experiment study

Male volunteers entered an immersive virtual reality that depicted a party, where they were approached by a lone virtual woman who initiated a conversation. The goal was to study how socially anxious and socially confident men would react to this event. Interest focused on whether the socially anxious participants would exhibit sustained anxiety during the conversation or whether this would diminish over time, and differ from the responses of the more socially confident men.

“Of Spitzenkandidaten and European Leaders”: Is the new 2014 "politicized” Presidency of the Commission going to be a real step forward in the EU legitimization process?

Thanks to ART.17.7 of the Lisbon Treaty, the European Council now has to “take into account” the results of EP Elections when selecting a candidate for the role of Commission President. The European Parliament has grabbed the opportunity to launch the first electoral race for spitzenkandidaten to the Presidency. Is this the start of a new democratizing (and thus, politicizing) process for the European Union? This dissertation will try to give a possible answer to the dilemma by constructing a comprehensive framework around EP Elections 2014 that will involve both the Commission and the Parliament and an analysis of the debate beyond legal provisions and the possibility of a politicized presidency of the Commission.

¿Pueden contribuir los métodos visuales a avanzar hacia una investigación inclusiva? Un estudio sobre inclusión sociolaboral con personas con Trastorno Mental Grave (TMG) = Can visual methods help to go forward inclusive research? A study about social and labor inclusion with people with Severe Mental Illness (SMI)

En este artículo se pretende mostrar cómo la utilización de métodos visuales en la investigación contribuye a potenciar la participación activa de las personas con TMG. Se utiliza como ejemplo un estudio de caso de corte cualitativo que incorpora tres actividades de componente visual (el dibujo “el río de la vida”, las fotografías y el dibujo de proyección de futuro) para favorecer la reflexión narrada que, sobre sus experiencias y vivencias, desarrollan cinco personas con TMG. El uso de las fotografías y dibujos en este estudio permite afirmar que estas estrategias se han mostrado válidas para acceder, en la medida que los participantes han querido, a esferas de vida personales en trayectorias vitales determinadas por la enfermedad mental

Deposition and characterization of lines printed through laser-induced forward transfer

The possibility of printing two-dimensional micropatterns of biomolecule solutions is of great interest in many fields of research in biomedicine, from cell-growth and development studies to the investigation of the mechanisms of communication between cells. Although laser-induced forward transfer (LIFT) has been extensively used to print micrometric droplets of biological solutions, the fabrication of complex patterns depends on the feasibility of the technique to print micron-sized lines of aqueous solutions. In this study we investigate such a possibility through the analysis of the influence of droplet spacing of a water and glycerol solution on the morphology of the features printed by LIFT. We prove that it is indeed possible to print long and uniform continuous lines by controlling the overlap between adjacent droplets. We show how, depending on droplet spacing, several printed morphologies are generated, and we offer, in addition, a simple explanation of the observed behavior based on the jetting dynamics characteristic of the LIFT of liquids.