25 resultados para cylindrical grinding
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
Cells from lung and other tissues are subjected to forces of opposing directions that are largely transmitted through integrin-mediated adhesions. How cells respond to force bidirectionality remains ill defined. To address this question, we nanofabricated flat-ended cylindrical Atomic Force Microscopy (AFM) tips with ~1 µm2 cross-section area. Tips were uncoated or coated with either integrin-specific (RGD) or non-specific (RGE/BSA) molecules, brought into contact with lung epithelial cells or fibroblasts for 30 s to form focal adhesion precursors, and used to probe cell resistance to deformation in compression and extension. We found that cell resistance to compression was globally higher than to extension regardless of the tip coating. In contrast, both tip-cell adhesion strength and resistance to compression and extension were the highest when probed at integrin-specific adhesions. These integrin-specific mechanoresponses required an intact actin cytoskeleton, and were dependent on tyrosine phosphatases and Ca2+ signaling. Cell asymmetric mechanoresponse to compression and extension remained after 5 minutes of tip-cell adhesion, revealing that asymmetric resistance to force directionality is an intrinsic property of lung cells, as in most soft tissues. Our findings provide new insights on how lung cells probe the mechanochemical properties of the microenvironment, an important process for migration, repair and tissue homeostasis.
Resumo:
Ceramic vessels and milling stones are important components of the archaeological record in several Nuraghi from the Pranemuru Plateau (Sardinia). To obtain information on the possible uses of the milling stones and the content vessels is of great interest to understand the economical activities carried out in these sites by these populations. One of the approaches to obtain information on the plant uses was the phytolith analyses of the sediment adhered both to the surface of the milling stones and to the surface of the vessel content. In total we analyzed eleven archaeological samples and two control samples collected from five different Nuraghi in the Pranemuru Plateau (Nuoro Province, Sardinia). The Nuraghi were located in an area of 10 km radius from nuraghe Arrubiu and were chronologically ascribed to the Bronze Age and one site -Pranu Illixi- to the Iron Age.
Resumo:
Projecte de recerca elaborat a partir d’una estada a la Charité - Universitätsmedizin Berlin, Alemanya, entre novembre i desembre del 2007. En aquest treball es presenta el protocol a seguir per a dur a terme el cultiu d’embrions sencers in vitro (Whole Embryo Culture, WEC). Amb aquest protocol es pretén implementar la tècnica del WEC en el laboratori de la Unitat de Toxicologia de la Facultat de Farmàca (UB), seguint la metodologia apresa durant l’estada i deixant per escrit tots els passos seguits i el material i la metodologia concreta de cadascun d’ells. En el WEC es cultiven embrions de rata de 9.5 dies durant 48h en ampolles rotatòries en un medi líquid i amb una fase gasosa controlats. Durant el cultiu, tenen lloc dos processos principals: el plegament de l’embrió i l’organogènesi. Els embrions durant els dos dies que dura el cultiu es pleguen en els plans transversal i sagital, passant d’un embrió pla a un altre de cilíndric en forma de “C”. En aquest període, a més, es produeixen importants processos d’organogènesi com la neurulació, la formació de la cresta neural, dels somites, dels vasos sanguinis - el cor inclòs- i de la sang. Es comencen a formar la placoda nasal, la vesícula oftàlmica, la vesícula òtica, les extremitats superiors i inferiors i la cua. En la memòria adjunta es descriuen amb detall els processos d'aparellament dels animals, preparació del material i del medi de cultiu, el procés d'aïllament del embrions en el dia 9.5, les condicions de cultiu i l'avaluació dels embrions en el dia 11.5. Finalment es presenten resultats d'embrions en situació control amb un correcte desenvolupament i es mostra com, al final de l'estada, es va aconseguir el cultiu d’embrions control amb un desenvolupament correcte i estadísticament sense diferències respecte als diferents paràmetres mesurats en comparació amb els embrions control de la Charité-Universitätsmedizin de Berlin.
Resumo:
The production of dicalcium phosphate are included in the list of industries classified as NORM in Euratom 29/96. The aim of this study is to determine the con-centrations of specific flows and their variability over time of 226Ra, 210Pb and 210Po in the inputs and out-puts of the production process. Also classified areas of the plant and the workers according to the radio-logical risk and radiation protection measures have been proposed. The results show that the rock phos-phate has a high specific activity of the 226Rn, 210Po and 210Pb in secular equilibrium (1500-2000 Bq • kg-1) but the outputs of the process will distort the secu-lar equilibrium. The only shortfall is the flow balance of 226Ra, which accumulates in the process. The dis-tribution of the dose in the plant concentrates on the area of reactor tanks and slop pipes as regards exter-nal irradiation dose and the grinding zone, the area of packaging and loading area so respects dose inhaled. We propose a signaling areas, cleaning and replace-ment of old equipment in the facilities and radiological safety of the maintenance staff.
Resumo:
Report for the scientific sojourn carried out at Massachusetts General Hospital Cancer Center-Harvard Medical School, Estats Units, from 2010 to 2011. The project aims to study the aggregation behavior of amphiphilic molecules in the continuous phase of highly concentrated emulsions, which can be used as templates for the synthesis of meso/macroporous materials. At this stage of the project, we have investigated the self-assembly of diblock and triblock surfactants under the effect of a confined geometry being surrounded by the droplets of the dispersed phase. These droplets limit the growth of the aggregates, deeply modify their orientation and hence alter their spatial arrangement as compared to the self-assembly taking place far enough from any boundary surface, that is in the bulk. By performing Monte Carlo simulations, we have showed that the interface between the dispersed and continuous phases as well as its shape has a significant impact on the structural order of the resulting aggregates and hence on the potential applications of highly concentrated emulsions as reaction media, drug delivery systems, or templates for meso/macroporous materials. Due to the combined effect of symmetry breaking and morphological frustration, very intriguing structures, such as square columnar liquid crystals, twisted X-shaped aggregates, and helical phases of cylindrical aggregates, never observed in the bulk for the same model surfactant, have been found. The presence of other more conventional structures, such as micelles and cubic and hexagonal liquid crystals, formed at low and high amphiphilic concentrations, respectively, further enhance the interest on this already rich aggregation behavior.
Resumo:
Human arteries affected by atherosclerosis are characterized by altered wall viscoelastic properties. The possibility of noninvasively assessing arterial viscoelasticity in vivo would significantly contribute to the early diagnosis and prevention of this disease. This paper presents a noniterative technique to estimate the viscoelastic parameters of a vascular wall Zener model. The approach requires the simultaneous measurement of flow variations and wall displacements, which can be provided by suitable ultrasound Doppler instruments. Viscoelastic parameters are estimated by fitting the theoretical constitutive equations to the experimental measurements using an ARMA parameter approach. The accuracy and sensitivity of the proposed method are tested using reference data generated by numerical simulations of arterial pulsation in which the physiological conditions and the viscoelastic parameters of the model can be suitably varied. The estimated values quantitatively agree with the reference values, showing that the only parameter affected by changing the physiological conditions is viscosity, whose relative error was about 27% even when a poor signal-to-noise ratio is simulated. Finally, the feasibility of the method is illustrated through three measurements made at different flow regimes on a cylindrical vessel phantom, yielding a parameter mean estimation error of 25%.
Resumo:
Silica speleothems take differenr forms such as cylindrical stems growing from either the floor or the ceiling in granitic caves. Mineralogically they are opal-A and accumulate in successive layers with a whiskery druse tip formed by gypsum crystals. Initially they are porous but progressively become infilled by opal precipitation. This results in formation of solid speleothems. their size is only a few millimetres long. Bacterial activity accelerate quartz dissolution
Resumo:
The possible association between the microquasar LS 5039 and the EGRET source 3EG J1824-1514 suggests that microquasars could also be sources of high energy gamma-rays. In this paper, we explore, with a detailed numerical model, if this system can produce the emission detected by EGRET (>100 MeV) through inverse Compton (IC) scattering. Our numerical approach considers a population of relativistic electrons entrained in a cylindrical inhomogeneous jet, interacting with both the radiation and the magnetic fields, taking into account the Thomson and Klein-Nishina regimes of interaction. The computed spectrum reproduces the observed spectral characteristics at very high energy.
Resumo:
The possible associations between the microquasars LS 5039 and LS I +61 303 and the EGRET sources 3EG J1824-1514 and 3EG J0241+6103 suggest that microquasars could also be sources of high-energy gamma-rays. In this work, we present a detailed numerical inverse Compton (IC) model, based on a microquasar scenario, that reproduces the high-energy gamma-ray spectra and variability observed by EGRET for the mentioned sources. Our model considers a population of relativistic electrons entrained in a cylindrical inhomogeneous jet that interact through IC scattering with both the radiation and the magnetic fields.
Resumo:
We investigate adsorption of helium in nanoscopic polygonal pores at zero temperature using a finite-range density functional theory. The adsorption potential is computed by means of a technique denoted as the elementary source method. We analyze a rhombic pore with Cs walls, where we show the existence of multiple interfacial configurations at some linear densities, which correspond to metastable states. Shape transitions and hysterectic loops appear in patterns which are richer and more complex than in a cylindrical tube with the same transverse area.
Resumo:
A phase-field model for dealing with dynamic instabilities in membranes is presented. We use it to study curvature-driven pearling instability in vesicles induced by the anchorage of amphiphilic polymers on the membrane. Within this model, we obtain the morphological changes reported in recent experiments. The formation of a homogeneous pearled structure is achieved by consequent pearling of an initial cylindrical tube from the tip. For high enough concentration of anchors, we show theoretically that the homogeneous pearled shape is energetically less favorable than an inhomogeneous one, with a large sphere connected to an array of smaller spheres.
Resumo:
We present the dynamic velocity profiles of a Newtonian fluid (glycerol) and a viscoelastic Maxwell fluid (CPyCl-NaSal in water) driven by an oscillating pressure gradient in a vertical cylindrical pipe. The frequency range explored has been chosen to include the first three resonance peaks of the dynamic permeability of the viscoelastic-fluid¿pipe system. Three different optical measurement techniques have been employed. Laser Doppler anemometry has been used to measure the magnitude of the velocity at the center of the liquid column. Particle image velocimetry and optical deflectometry are used to determine the velocity profiles at the bulk of the liquid column and at the liquid-air interface respectively. The velocity measurements in the bulk are in good agreement with the theoretical predictions of a linear theory. The results, however, show dramatic differences in the dynamic behavior of Newtonian and viscoelastic fluids, and demonstrate the importance of resonance phenomena in viscoelastic fluid flows, biofluids in particular, in confined geometries.
Resumo:
We have studied the interaction between the low-lying transverse collective oscillations and the thermal excitations of an elongated Bose-Einstein condensate by means of perturbation theory. We consider a cylindrical trapped condensate and calculate the transverse elementary excitations at zero temperature by solving the linearized Gross-Pitaevskii equations in two dimensions (2D). We use them to calculate the matrix elements between the thermal excited states and the quasi-2D collective modes. The Landau damping of transverse collective modes is studied as a function of temperature. At low temperatures, the corresponding damping rate is in agreement with the experimental data for the decay of the transverse quadrupole mode, but it is too small to explain the observed slow decay of the transverse breathing mode. The reason for this discrepancy is discussed.
Resumo:
A new experimental system to measure the equivalent thermal conductivity of a liquid with regard to the Bénard-Rayleigh problem was constructed. The liquid is enclosed within walls of polymethylmethacrylate between two copper plates in which there are thermocouples to measure the difference in temperature between the lower and upper surfaces of the layer of liquid. Heat flux is measured by means of a linear heat fluxmeter consisting of 204 thermocouples in series. The fluxmeter was calibrated and the linear relationship that exists between the heat flux and the emf generated was verified. The thermal conductivity of the polymethylmethacrylate employed was measured and measurements of the equivalent conductivity in cylindrical boundaries of two silicone oils were made. The critical value of the temperature difference and the contribution of the convective process to the transmission of heat were determined.
Resumo:
We have analyzed a two-dimensional lattice-gas model of cylindrical molecules which can exhibit four possible orientations. The Hamiltonian of the model contains positional and orientational energy interaction terms. The ground state of the model has been investigated on the basis of Karl¿s theorem. Monte Carlo simulation results have confirmed the predicted ground state. The model is able to reproduce, with appropriate values of the Hamiltonian parameters, both, a smectic-nematic-like transition and a nematic-isotropic-like transition. We have also analyzed the phase diagram of the system by mean-field techniques and Monte Carlo simulations. Mean-field calculations agree well qualitatively with Monte Carlo results but overestimate transition temperatures.