Analysis of IRAS stellar sources in Alpha Persei region

The present study is an analysis of IR sources in the Alpha Persei open cluster region from the IRAS Point Source Catalog and from ground-based photometric observations. Cross-identification between stars in the region and IRAS Point Source Catalog was performed and nine new associations were found. BVRI Johnson photometry for 24 of the matched objects have been carried out. Physical identity of visual and IRAS sources and relationship to the Alpha Persei open cluster are discussed.

Optical spectroscopy of microquasar candidates at low Galactic latitudes

We report optical spectroscopic observations of a sample of 6 low-galactic latitude microquasar candidates selected by cross-identification of X-ray and radio point source catalogs for |b|<5 degrees. Two objects resulted to be of clear extragalactic origin, as an obvious cosmologic redshift has been measured from their emission lines. For the rest, none exhibits a clear stellar-like spectrum as would be expected for genuine Galactic microquasars. Their featureless spectra are consistent with being extragalactic in origin although two of them could be also highly reddened stars. The apparent non-confirmation of our candidates suggests that the population of persistent microquasar systems in the Galaxy is more rare than previously believed. If none of them is galactic, the upper limit to the space density of new Cygnus X-3-like microquasars within 15 kpc would be 1.1\times10^{-12} per cubic pc. A similar upper limit for new LS 5039-like systems within 4 kpc is estimated to be 5.6\times10^{-11} per cubic pc.

Formation and distribution of point defects on a disclination line near a free nematic interface

Point defects of opposite signs can alternately nucleate on the -1/2 disclination line that forms near the free surface of a confined nematic liquid crystal. We show the existence of metastable configurations consisting of periodic repetitions of such defects. These configurations are characterized by a minimal interdefect spacing that is seen to depend on sample thickness and on an applied electric field. The time evolution of the defect distribution suggests that the defects attract at small distances and repel at large distances.

OnTheBus

El projecte OnTheBus pretén ser un sistema de guiatge gratuït, destinat per a la plataforma mòbil Android, útil com a eina d’ajuda pel desplaçament d’un punt d’origen a un punt de destí dins de la ciutat, utilitzant la xarxa de transport metropolità. Aquesta memòria s’enllaça amb 6 memòries més, dels meus companys amb els qui he realitzat el projecte OnTheBus. Per poder elaborar amb èxit l’aplicació OntheBus, cal donar importància al disseny i a la implementació de la interfície d’usuari. L’objectiu d’aquesta memòria és explicar com s’ha realitzat i dissenyat l’aplicació perquè sigui accessible per a tothom. Ja que pot tenir un rang molt ampli d’edats d’usuaris, la implementació de la interfície està basada en les directrius del Disseny Universal.

OnTheBus

El projecte OnTheBus pretén ser un sistema de guiatge gratuït, destinat per a la plataforma mòbil Android, útil com a eina d’ajuda pel desplaçament d’un punt d’origen a un punt de destí dins de la ciutat, utilitzant la xarxa de transport metropolità. Aquesta memòria s’enllaça amb 6 memòries més, dels meus companys amb els qui he realitzat el projecte OnTheBus. Per poder elaborar amb èxit l’aplicació OntheBus, cal donar importància al disseny i a la implementació de la interfície d’usuari. L’objectiu d’aquesta memòria és explicar com s’ha realitzat i dissenyat l’aplicació perquè sigui accessible per a tothom. Ja que pot tenir un rang molt ampli d’edats d’usuaris, la implementació de la interfície està basada en les directrius del Disseny Universal.

Herramientas open source para la creación de portales

En aquest treball es proposa una aproximació al món del codi font obert des del punt de vista de la realització de portals col·laboratius i les seves eines involucrades. Per fer-ho, es passa revista als diferents tipus d'aplicacions, plataformes i utilitats que trobem disponibles, i s'agrupen en diferents categories: infraestructura i sistemes, serveis de comunicació, serveis de comunitat, serveis genèrics de portal, eines d'interacció amb sistemes mòbils, eines per al desenvolupament i prova i llibreries de suport.

Contribution to Asterisk Open Source Project

With this final master thesis we are going to contribute to the Asterisk open source project. Asterisk is an open source project that started with the main objective of develop an IP telephony platform, completely based on Software (so not hardware dependent) and under an open license like GPL. This project was started on 1999 by the software engineer Mark Spencer at Digium. The main motivation of that open source project was that the telecommunications sector is lack of open solutions, and most of the available solutions are based on proprietary standards, which are close and not compatible between them. Behind the Asterisk project there is a company, Digum, which is the project leading since the project was originated in its laboratories. This company has some of its employees fully dedicated to contribute to the Asterisk project, and also provide the whole infrastructure required by the open source project. But the business of Digium isn't based on licensing of products due to the open source nature of Asterisk, but it's based on offering services around Asteriskand designing and selling some hardware components to be used with Asterisk. The Asterisk project has grown up a lot since its birth, offering in its latest versions advanced functionalities for managing calls and compatibility with some hardware that previously was exclusive of proprietary solutions. Due to that, Asterisk is becoming a serious alternative to all these proprietaries solutions because it has reached a level of maturity that makes it very stable. In addition, as it is open source, it can be fully customized to a givenrequirement, which could be impossible with the proprietaries solutions. Due to the bigness that is reaching the project, every day there are more companies which develop value added software for telephony platforms, that are seriously evaluating the option of make their software fully compatible withAsterisk platforms. All these factors make Asterisk being a consolidated project but in constant evolution, trying to offer all those functionalities offered by proprietaries solutions. This final master thesis will be divided mainly in two blocks totally complementaries. In the first block we will analyze Asterisk as an open source project and Asterisk as a telephony platform (PBX). As a result of this analysis we will generate a document, written in English because it is Asterisk project's official language, which could be used by future contributors as an starting point on joining Asterisk. On the second block we will proceed with a development contribution to the Asterisk project. We will have several options in the form that we do the contribution, such as solving bugs, developing new functionalities or start an Asterisk satellite project. The type of contribution will depend on the needs of the project on that moment.

Two methods for voltage sag source location

This paper presents and compares two approaches to estimate the origin (upstream or downstream) of voltage sag registered in distribution substations. The first approach is based on the application of a single rule dealing with features extracted from the impedances during the fault whereas the second method exploit the variability of waveforms from an statistical point of view. Both approaches have been tested with voltage sags registered in distribution substations and advantages, drawbacks and comparative results are presented

Country portfolios and the Solow-model

This paper shows that an open economy Solow model provides a good description of international investment positions in industrialized countries. More than half of the variation of net foreign assets in the 1990's can be attributed to cross country differences in the savings rate, population and productivity growth. Furthermore, these factors seem to be an important channel through which output and wealth affect international investment positions. We interpret this funding as evidence that decreasing returns are an important source of international capital movements. The savings rate (andpopulation growth) influence the composition of country portfolios through their downward (upward) pressure on the marginal productivity of capital.

Kinematic reduction of reaction-diffusion fronts with multiplicative noise. Derivation of stochastic sharp-interface equations

We study the dynamics of generic reaction-diffusion fronts, including pulses and chemical waves, in the presence of multiplicative noise. We discuss the connection between the reaction-diffusion Langevin-like field equations and the kinematic (eikonal) description in terms of a stochastic moving-boundary or sharp-interface approximation. We find that the effective noise is additive and we relate its strength to the noise parameters in the original field equations, to first order in noise strength, but including a partial resummation to all orders which captures the singular dependence on the microscopic cutoff associated with the spatial correlation of the noise. This dependence is essential for a quantitative and qualitative understanding of fluctuating fronts, affecting both scaling properties and nonuniversal quantities. Our results predict phenomena such as the shift of the transition point between the pushed and pulled regimes of front propagation, in terms of the noise parameters, and the corresponding transition to a non-Kardar-Parisi-Zhang universality class. We assess the quantitative validity of the results in several examples including equilibrium fluctuations and kinetic roughening. We also predict and observe a noise-induced pushed-pulled transition. The analytical predictions are successfully tested against rigorous results and show excellent agreement with numerical simulations of reaction-diffusion field equations with multiplicative noise.

Heat pulse line-source method to determine thermal conductivity of consolidated rocks

An instrument designed to measure thermal conductivity of consolidated rocks, dry or saturated, using a transient method is presented. The instrument measures relative values of the thermal conductivity, and it needs calibration to obtain absolute values. The device can be used as heat pulse line source and as continuous heat line source. Two parameters to determine thermal conductivity are proposed: TMAX, in heat pulse line source, and SLOPE, in continuous heat line source. Its performance is better, and the operation simpler, in heat pulse line-source mode with a measuring time of 170 s and a reproducibility better than 2.5%. The sample preparation is very simple on both modes. The performance has been tested with a set of ten rocks with thermal conductivity values between 1.4 and 5.2 W m¿1 K¿1 which covers the usual range for consolidated rocks.

Rockfall monitoring by Terrestrial Laser Scanning ¿ case study of the basaltic rock face at Castellfollit de la Roca (Catalonia, Spain)

This case study deals with a rock face monitoring in urban areas using a Terrestrial Laser Scanner. The pilot study area is an almost vertical, fifty meter high cliff, on top of which the village of Castellfollit de la Roca is located. Rockfall activity is currently causing a retreat of the rock face, which may endanger the houses located at its edge. TLS datasets consist of high density 3-D point clouds acquired from five stations, nine times in a time span of 22 months (from March 2006 to January 2008). The change detection, i.e. rockfalls, was performed through a sequential comparison of datasets. Two types of mass movement were detected in the monitoring period: (a) detachment of single basaltic columns, with magnitudes below 1.5 m3 and (b) detachment of groups of columns, with magnitudes of 1.5 to 150 m3. Furthermore, the historical record revealed (c) the occurrence of slab failures with magnitudes higher than 150 m3. Displacements of a likely slab failure were measured, suggesting an apparent stationary stage. Even failures are clearly episodic, our results, together with the study of the historical record, enabled us to estimate a mean detachment of material from 46 to 91.5 m3 year¿1. The application of TLS considerably improved our understanding of rockfall phenomena in the study area.

Rockfall monitoring by Terrestrial Laser Scanning ¿ case study of the basaltic rock face at Castellfollit de la Roca (Catalonia, Spain)

This case study deals with a rock face monitoring in urban areas using a Terrestrial Laser Scanner. The pilot study area is an almost vertical, fifty meter high cliff, on top of which the village of Castellfollit de la Roca is located. Rockfall activity is currently causing a retreat of the rock face, which may endanger the houses located at its edge. TLS datasets consist of high density 3-D point clouds acquired from five stations, nine times in a time span of 22 months (from March 2006 to January 2008). The change detection, i.e. rockfalls, was performed through a sequential comparison of datasets. Two types of mass movement were detected in the monitoring period: (a) detachment of single basaltic columns, with magnitudes below 1.5 m3 and (b) detachment of groups of columns, with magnitudes of 1.5 to 150 m3. Furthermore, the historical record revealed (c) the occurrence of slab failures with magnitudes higher than 150 m3. Displacements of a likely slab failure were measured, suggesting an apparent stationary stage. Even failures are clearly episodic, our results, together with the study of the historical record, enabled us to estimate a mean detachment of material from 46 to 91.5 m3 year¿1. The application of TLS considerably improved our understanding of rockfall phenomena in the study area.

Free Open Source Software and Dual-Use: Loophole or Dissent?

The Free Open Source Software (FOSS) seem far from the military field but in some cases, some technologies normally used for civilian purposes may have military applications. These products and technologies are called dual-use. Can we manage to combine FOSS and dual-use products? On one hand, we have to admit that this kind of association exists - dual-use software can be FOSS and many examples demonstrate this duality - but on the other hand, dual-use software available under free licenses lead us to ask many questions. For example, the dual-use export control laws aimed at stemming the proliferation of weapons of mass destruction. Dual-use export in United States (ITAR) and Europe (regulation 428/2009) implies as a consequence the prohibition or regulation of software exportation, involving the closing of source code. Therefore, the issues of exported softwares released under free licenses arises. If software are dual-use goods and serve for military purposes, they may represent a danger. By the rights granted to licenses to run, study, redistribute and distribute modified versions of the software, anyone can access the free dual-use software. So, the licenses themselves are not at the origin of the risk, it is actually linked to the facilitated access to source codes. Seen from this point of view, it goes against the dual-use regulation which allows states to control these technologies exportation. For this analysis, we will discuss about various legal questions and draft answers from either licenses or public policies in this respect.

Apertium Advanced Web Interface : A first step towards interactivity and language tools convergence

This documents sums up a projectaimed at building a new web interfaceto the Apertium machine translationplatform, including pre-editing andpost-editing environments. It containsa description of the accomplished workon this project, as well as an overviewof possible evolutions.