A fast Bayesian reconstruction algorithm for emission tomography with entropy prior converging to feasible images

The development and tests of an iterative reconstruction algorithm for emission tomography based on Bayesian statistical concepts are described. The algorithm uses the entropy of the generated image as a prior distribution, can be accelerated by the choice of an exponent, and converges uniformly to feasible images by the choice of one adjustable parameter. A feasible image has been defined as one that is consistent with the initial data (i.e. it is an image that, if truly a source of radiation in a patient, could have generated the initial data by the Poisson process that governs radioactive disintegration). The fundamental ideas of Bayesian reconstruction are discussed, along with the use of an entropy prior with an adjustable contrast parameter, the use of likelihood with data increment parameters as conditional probability, and the development of the new fast maximum a posteriori with entropy (FMAPE) Algorithm by the successive substitution method. It is shown that in the maximum likelihood estimator (MLE) and FMAPE algorithms, the only correct choice of initial image for the iterative procedure in the absence of a priori knowledge about the image configuration is a uniform field.

Validation of a computer-assisted system on classifying lower third molars

Objectives: The present study evaluates the reliability of the Radio Memory® software (Radio Memory; Belo Horizonte,Brasil.) on classifying lower third molars, analyzing intra- and interexaminer agreement of the results. Study Design: An observational, descriptive study of 280 lower third molars was made. The corresponding orthopantomographs were analyzed by two examiners using the Radio Memory® software. The exam was repeated 30 days after the first observation by each examiner. Both intra- and interexaminer agreement were determined using the SPSS v 12.0 software package for Windows (SPSS; Chicago, USA). Results: Intra- and interexaminer agreement was shown for both the Pell & Gregory and the Winter classifications, p<0.01, with 99% significant correlation between variables in all the cases. Conclusions: The use of Radio Memory® software for the classification of lower third molars is shown to be a valid alternative to the conventional method (direct evaluation on the orthopantomograph), for both clinical and investigational applications.

Microcalcification evaluation in computer assisted diagnosis for digital mammography

In order to develop applications for z;isual interpretation of medical images, the early detection and evaluation of microcalcifications in digital mammograms is verg important since their presence is oftenassociated with a high incidence of breast cancers. Accurate classification into benign and malignant groups would help improve diagnostic sensitivity as well as reduce the number of unnecessa y biopsies. The challenge here is the selection of the useful features to distinguish benign from malignant micro calcifications. Our purpose in this work is to analyse a microcalcification evaluation method based on a set of shapebased features extracted from the digitised mammography. The segmentation of the microcalcificationsis performed using a fixed-tolerance region growing method to extract boundaries of calcifications with manually selected seed pixels. Taking into account that shapes and sizes of clustered microcalcificationshave been associated with a high risk of carcinoma based on digerent subjective measures, such as whether or not the calcifications are irregular, linear, vermiform, branched, rounded or ring like, our efforts were addressed to obtain a feature set related to the shape. The identification of the pammeters concerning the malignant character of the microcalcifications was performed on a set of 146 mammograms with their real diagnosis known in advance from biopsies. This allowed identifying the following shape-based parameters as the relevant ones: Number of clusters, Number of holes, Area, Feret elongation, Roughness, and Elongation. Further experiments on a set of 70 new mammogmms showed that the performance of the classification scheme is close to the mean performance of three expert radiologists, which allows to consider the proposed method for assisting the diagnosis and encourages to continue the investigation in the senseof adding new features not only related to the shape

Electronic voting system for computer supported collaborative learning

The EVS4CSCL project starts in the context of a Computer Supported Collaborative Learning environment (CSCL). Previous UOC projects created a CSCL generic platform (CLPL) to facilitate the development of CSCL applications. A discussion forum (DF) was the first application developed over the framework. This discussion forum was different from other products on the marketplace because of its focus on the learning process. The DF carried out the specification and elaboration phases from the discussion learning process but there was a lack in the consensus phase. The consensus phase in a learning environment is not something to be achieved but tested. Common tests are done by Electronic Voting System (EVS) tools, but consensus test is not an assessment test. We are not evaluating our students by their answers but by their discussion activity. Our educational EVS would be used as a discussion catalyst proposing a discussion about the results after an initial query or it would be used after a discussion period in order to manifest how the discussion changed the students mind (consensus). It should be also used by the teacher as a quick way to know where the student needs some reinforcement. That is important in a distance-learning environment where there is no direct contact between the teacher and the student and it is difficult to detect the learning lacks. In an educational environment, assessment it is a must and the EVS will provide direct assessment by peer usefulness evaluation, teacher marks on every query created and indirect assessment from statistics regarding the user activity.

Discovering the campus together: a mobile and computer-based learning experience

One of the most relevant difficulties faced by first-year undergraduate students is to settle into the educational environment of universities. This paper presents a case study that proposes a computer-assisted collaborative experience designed to help students in their transition from high school to university. This is done by facilitating their first contact with the campus and its services, the university community, methodologies and activities. The experience combines individual and collaborative activities, conducted in and out of the classroom, structured following the Jigsaw Collaborative Learning Flow Pattern. A specific environment including portable technologies with network and computer applications has been developed to support and facilitate the orchestration of a flow of learning activities into a single integrated learning setting. The result is a Computer-Supported Collaborative Blended Learning scenario, which has been evaluated with first-year university students of the degrees of Software and Audiovisual Engineering within the subject Introduction to Information and Communications Technologies. The findings reveal that the scenario improves significantly students’ interest in their studies and their understanding about the campus and services provided. The environment is also an innovative approach to successfully support the heterogeneous activities conducted by both teachers and students during the scenario. This paper introduces the goals and context of the case study, describes how the technology was employed to conduct the learning scenario, the evaluation methods and the main results of the experience.

Testing Cayley graph densities

We present a computer-assisted analysis of combinatorial properties of the Cayley graphs of certain finitely generated groups: Given a group with a finite set of generators, we study the density of the corresponding Cayley graph, that is, the least upper bound for the average vertex degree (= number of adjacent edges) of any finite subgraph. It is known that an m-generated group is amenable if and only if the density of the corresponding Cayley graph equals to 2m. We test amenable and non-amenable groups, and also groups for which amenability is unknown. In the latter class we focus on Richard Thompson’s group F.

Projecte interactiu "Vila-moguda"

La idea inicial va ser la de crear un interactiu multimèdia amb finalitat didàctica que gira entorn els trastorns per dèficit d'atenció.Està adreçat a nens en edat escolar. Com a part principal hi ha una sèrie d'activitatsindicades per a potenciar la concentració i motivar a acabar allò que comença, així comdiversa informació sobre el transtorn i consells sobre activitats a realitzar per treballar les carències d'aquests nens/es.

JWQ : Java WebQuest

L¿objectiu principal d¿aquest projecte és el de donar resposta a la necessitat de uncol·lectiu de professors i alumnes de magisteri de disposar d¿una eina de pràctiques per larealització de WebQuests.

Projecte Matic : Una eina d' ensenyament assistit per ordinador via internet

El projecte Matic vol crear un entorn d'EAO apte per a treballar qualsevol contingut acadèmic i personalitzat per a cada estudiant, seguint les directrius marcades pel professor, que en podrà fer el seguiment acadèmic.

Creació d'un Sistema d'Informació Geogràfica de Carreteres amb GEOMEDIA PROFESSIONAL 5.2

Aquest document detalla, desglossant la informació en diferents capítols, les tasques que s'han fet per a construir un sistema d'informació geogràfica (SIG) de carreteres emprant el producte Geomedia Professional 5.2 d'Intergraph: què és un SIG, per a què serveix, quins usos pot tenir i què el diferencia d'altres productes semblants com ara un programari de disseny assistit per ordinador (CAD) o un sistema de teledetecció, nocions de cartografia, formats d'intercanvi d'informació geogràfica, etc.

Esquema criptogràfic per exàmens electrònics segurs

L'objectiu d'aquest projecte és implementar un esquema criptogràfic que permeti fer exàmens electrònics de manera segura. L'esquema presentat en el projecte garanteix, mitjançant protocols i procediments, cadascuna de les etapes que es poden trobar en aquest cicle de vida.

Projecte de usabilitat : Menú gestió acadèmica telemàtica de la Universitat Oberta de Catalunya

La finalitat general d'aquest projecte és dissenyar i avaluar la facilitat d'ús del menú de l'aplicació GAT. Els objectius principals són ordenar, agrupar i classificar les opcions del menú, agrupar-les per processos i subprocessos de la UOC, disminuir l'adaptació a l'aplicació, facilitar-ne l'aprenentatge i distingir amb claredat si és una opció de tipus formulari o de tipus web.

Interfície de control de una línia industrial automatitzada

Estudi seriós sobre les interfícies gràfiques destinades al sector industrial. En aquest sentit, s'analitza el perfil d'usuari o usuaris més freqüent en aquest sector (les seves característiques i les seves necessitats), es presenten i es descriuen diverses pautes de disseny i diversos elements gràfics que compleixen una sèrie de requisits predefinits, es procedeix a fer un muntatge d'exemple presentant una sèrie de pantalles (se n'explica i justifica el funcionament) i, per acabar, es proposa un mètode per a fer la validació del disseny, mètode que pot comportar modificacions sobre el disseny inicial.

Diseño y prototipo de un sistema de eventos para dispositivos móviles en el trabajo en grupo

El present treball de fi de carrera té com a objectiu la conceptualització, disseny i prototip d'un sistema d'esdeveniments per a dispositius mòbils que permetin la comunicació entre Universitat, Docent i Alumne independentment de l'espai físic i temporal de qualsevol d'aquests actors, utilitzant per a això els dispositius mòbils i smartphones d'àmplia presència i ús.

Tecnobilingüe.NET

Portal web, usando tecnología .NET, destinado a alumnos de secundaria que cursan la asignatura de Tecnología de forma bilingüe.