Prediction of rabbit meat and bone weight using measurements and sample cuts

Regression equations predicting dissectable muscle weight in rabbits from external measurements were presented. Bone weight and weight of muscle groups were also carcass predicted. Predictive capacity of external measurements, retail cuts and muscle groups on total muscle, percent muscle, total bone and muscle to bone ratio were studied separately. Measurements on dissected retail cuts should be included in ordcr to obtain good equations for prediction of percent muscle in the carcass. Equations for predicting the muscle to bone ratio using external mcasurcments and data from the dissection of one hind leg were suggested. The equations had generally high coefficients of determination. The coefficient of determination for prediction of dissectable muscle was 0.91, and for percent muscle in the carcass 0.79.

Non-invasive monitoring of diaphragmatic timing by means of surface contact sensors: an experimental study in dogs

Background: Non-invasive monitoring of respiratory muscle function is an area of increasing research interest, resulting in the appearance of new monitoring devices, one of these being piezoelectric contact sensors. The present study was designed to test whether the use of piezoelectric contact (non-invasive) sensors could be useful in respiratory monitoring, in particular in measuring the timing of diaphragmatic contraction.Methods: Experiments were performed in an animal model: three pentobarbital anesthetized mongrel dogs. The motion of the thoracic cage was acquired by means of a piezoelectric contact sensor placed on the costal wall. This signal is compared with direct measurements of the diaphragmatic muscle length, made by sonomicrometry. Furthermore, to assess the diaphragmatic function other respiratory signals were acquired: respiratory airflow and transdiaphragmatic pressure. Diaphragm contraction time was estimated with these four signals. Using diaphragm length signal as reference, contraction times estimated with the other three signals were compared with the contraction time estimated with diaphragm length signal.Results: The contraction time estimated with the TM signal tends to give a reading 0.06 seconds lower than the measure made with the DL signal (-0.21 and 0.00 for FL and DP signals, respectively), with a standard deviation of 0.05 seconds (0.08 and 0.06 for FL and DP signals, respectively). Correlation coefficients indicated a close link between time contraction estimated with TM signal and contraction time estimated with DL signal (a Pearson correlation coefficient of 0.98, a reliability coefficient of 0.95, a slope of 1.01 and a Spearman's rank-order coefficient of 0.98). In general, correlation coefficients and mean and standard deviation of the difference were better in the inspiratory load respiratory test than in spontaneous ventilation tests.Conclusion: The technique presented in this work provides a non-invasive method to assess the timing of diaphragmatic contraction in canines, using a piezoelectric contact sensor placed on the costal wall.

Markups, Gaps, and the Welfare Costs of Business Fluctuations

In this paper we present a simple theory-based measure of the variations in aggregate economic efficiency: the gap between the marginal product of labor and the household s consumption/leisure tradeoff. We show that this indicator corresponds to the inverse of the markup of price over social marginal cost, and give some evidence in support of this interpretation. We then show that, with some auxilliary assumptions our gap variable may be used to measure the efficiency costs of business fluctuations. We find that the latter costs are modest on average. However, to the extent the flexible price equilibrium is distorted, the gross efficiency losses from recessions and gains from booms may be large. Indeed, we find that the major recessions involved large efficiency losses. These results hold for reasonable parameterizations of the Frisch elasticity of labor supply, the coefficient of relative risk aversion, and steady state distortions.

The disturbing 'rise' of global income inequality

We use aggregate GDP data and within-country income shares for theperiod 1970-1998 to assign a level of income to each person in theworld. We then estimate the gaussian kernel density function for theworldwide distribution of income. We compute world poverty rates byintegrating the density function below the poverty lines. The $1/daypoverty rate has fallen from 20% to 5% over the last twenty five years.The $2/day rate has fallen from 44% to 18%. There are between 300 and500 million less poor people in 1998 than there were in the 70s.We estimate global income inequality using seven different popularindexes: the Gini coefficient, the variance of log-income, two ofAtkinson s indexes, the Mean Logarithmic Deviation, the Theil indexand the coefficient of variation. All indexes show a reduction in globalincome inequality between 1980 and 1998. We also find that most globaldisparities can be accounted for by across-country, not within-country,inequalities. Within-country disparities have increased slightly duringthe sample period, but not nearly enough to offset the substantialreduction in across-country disparities. The across-country reductionsin inequality are driven mainly, but not fully, by the large growth rateof the incomes of the 1.2 billion Chinese citizens. Unless Africa startsgrowing in the near future, we project that income inequalities willstart rising again. If Africa does not start growing, then China, India,the OECD and the rest of middle-income and rich countries diverge awayfrom it, and global inequality will rise. Thus, the aggregate GDP growthof the African continent should be the priority of anyone concerned withincreasing global income inequality.

Markups, gaps and the welfare costs of business fluctuations

In this paper we present a simple theory-based measure of the variations in aggregate economic efficiency: the gap between the marginal product of labor and the household s consumption/leisure tradeoff. We show that this indicator corresponds to the inverse of the markup of price over social marginal cost, and give some evidence in support of this interpretation. We then show that, with some auxilliary assumptions our gap variable may be used to measure the efficiency costs of business fluctuations. We find that the latter costs are modest on average. However, to the extent the flexible price equilibrium is distorted,the gross efficiency losses from recessions and gains from booms may be large. Indeed, we find that the major recessions involved large efficiency losses. These results hold for reasonable parameterizations of the Frisch elasticity of labor supply, the coefficient of relative risk aversion, and steady state distortions.

Size dependence of refractive index of Si nanoclusters embedded in SiO2

he complex refractive index of SiO2 layers containing Si nanoclusters (Si-nc) has been measured by spectroscopic ellipsometry in the range from 1.5 to 5.0 eV. It has been correlated with the amount of Si excess accurately measured by x-ray photoelectron spectroscopy and the nanocluster size determined by energy-filtered transmission electron microscopy. The Si-nc embedded in SiO2 have been produced by a fourfold Si+ ion implantation, providing uniform Si excess aimed at a reliable ellipsometric modeling. The complex refractive index of the Si-nc phase has been calculated by the application of the Bruggeman effective-medium approximation to the composite media. The characteristic resonances of the refractive index and extinction coefficient of bulk Si vanish out in Si-nc. In agreement with theoretical simulations, a significant reduction of the refractive index of Si-nc is observed, in comparison with bulk and amorphous silicon. The knowledge of the optical properties of these composite layers is crucial for the realization of Si-based waveguides and light-emitting devices.

Generation of uncorrelated random scale-free networks

Uncorrelated random scale-free networks are useful null models to check the accuracy and the analytical solutions of dynamical processes defined on complex networks. We propose and analyze a model capable of generating random uncorrelated scale-free networks with no multiple and self-connections. The model is based on the classical configuration model, with an additional restriction on the maximum possible degree of the vertices. We check numerically that the proposed model indeed generates scale-free networks with no two- and three-vertex correlations, as measured by the average degree of the nearest neighbors and the clustering coefficient of the vertices of degree k, respectively.

Some common indexes of group diversity: upper boundaries

Workgroup diversity can be conceptualized as variety, separation, or disparity. Thus, the proper operationalization of diversity depends on how a diversity dimension has been defined. Analytically, the minimal diversity must be obtained when there are no differences on an attribute among the members of a group, however maximal diversity has a different shape for each conceptualization of diversity. Previous work on diversity indexes indicated maximum values for variety (e.g., Blau"s index and Teachman"s index), separation (e.g., standard deviation and mean Euclidean distance), and disparity (e.g., coefficient of variation and the Gini coefficient of concentration), although these maximum values are not valid for all group characteristics (i.e., group size and group size parity) and attribute scales (i.e., number of categories). We demonstrate analytically appropriate upper boundaries for conditional diversity determined by some specific group characteristics, avoiding the bias related to absolute diversity. This will allow applied researchers to make better interpretations regarding the relationship between group diversity and group outcomes.

Predictions of the MCMI-III personality disorders from NEO-PI-R domains and facets: Comparison between American and Spanish samples

Este estudio ex post facto analiza las relaciones entre las dimensiones y facetas del NEO-PI-R y los 14 trastornos de personalidad del MCMI-III en una muestra no clínica española (N = 674). Se exploran las diferencias y similitudes con los resul- tados de Dyce y O’Connor en una muestra americana con los mismos instrumentos. Como se esperaba, los análisis factoriales de facetas reteniendo cinco factores mostraron un modelo de relaciones muy similar entre ambas muestras, con un coeficiente de la congruencia total de 0,92, y coeficientes de congruencia de factor aceptables, salvo para el factor Apertura (0,68). En consonancia con las predicciones de Widiger y Widiger et al. los porcentajes de correlaciones significativas estaban alrededor de 60% en ambas muestras, y la mayoría coincidían. El análisis de regresión múltiple con dimensiones también reveló un gran parecido entre los resultados americanos y españoles, Neuroticismo fue el predictor más relacionado con los trastornos de personalidad. Se encontraron diferencias en las regresiones por facetas, aunque la varianza explicada fue prácticamente la misma que en las dimensiones. Se discute la validez transcultural y el valor predictivo del NEO-PI-R sobre los trastornos de personalidad del MCMI-III, junto con las ventajas relativas de las facetas sobre las dimensiones.

Equivalent roughness of gravel-bed rivers

The relation between the equivalent roughness and different grain size percentiles of the sediment in gravel-bed rivers was determined under the hypothesis that the vertical distribution of the flow velocity follows a logarithmic law. A set of 954 data points was selected from rivers with gravel size sediment or larger, with a non-sinuous alignment and free of vegetation or obstacles. According to the results, the ks roughness is equivalent to approximately 2.4D90, 2.8D84, and 6.1D50. No correlation was detected between the sediment sorting and the sediment mobility index on one hand, and, on the other, the coefficient of proportionality of each grain size percentile.

Incompressibility of neutron-rich matter

The saturation properties of neutron-rich matter are investigated in a relativistic mean-field formalism using two accurately calibrated models: NL3 and FSUGold. The saturation properties density, binding energy per nucleon, and incompressibility coefficient are calculated as a function of the neutron-proton asymmetry α≡(N-Z)/A to all orders in α. Good agreement (at the 10% level or better) is found between these numerical calculations and analytic expansions that are given in terms of a handful of bulk parameters determined at saturation density. Using insights developed from the analytic approach and a general expression for the incompressibility coefficient of infinite neutron-rich matter, i.e., K0(α)=K0+Kτα2+ , we construct a hybrid model with values for K0 and Kτ as suggested by recent experimental findings. Whereas the hybrid model provides a better description of the measured distribution of isoscalar monopole strength in the Sn isotopes relative to both NL3 and FSUGold, it significantly underestimates the distribution of strength in 208Pb. Thus, we conclude that the incompressibility coefficient of neutron-rich matter remains an important open problem.

The Spatial Distribution of Human Capital: Can It Really Be Explained by Regional Differences in Market Access?

This paper tests the robustness of estimates of market access impact on regional variability in human capital, as previously derived in the NEG literature. Our hypothesis is that these estimates of the coefficient of market access, in fact, capture the effects of regional differences in the industrial mix and the spatial dependence in the distribution of human capital. Results for the Spanish provinces indicate that the estimated impact of market access vanishes and becomes non-significant once these two elements are included in the empirical analysis.

New methods for the concentration of viruses from urban sewage using quantitative PCR.

Viruses are among the most important pathogens present in water contaminated with feces or urine and represent a serious risk to human health. Four procedures for concentrating viruses from sewage have been compared in this work, three of which were developed in the present study. Viruses were quantified using PCR techniques. According to statistical analysis and the sensitivity to detect human adenoviruses (HAdV), JC polyomaviruses (JCPyV) and noroviruses genogroup II (NoV GGII): (i) a new procedure (elution and skimmed-milk flocculation procedure (ESMP)) based on the elution of the viruses with glycine-alkaline buffer followed by organic flocculation with skimmed-milk was found to be the most efficient method when compared to (ii) ultrafiltration and glycine-alkaline elution, (iii) a lyophilization-based method and (iv) ultracentrifugation and glycine-alkaline elution. Through the analysis of replicate sewage samples, ESMP showed reproducible results with a coefficient of variation (CV) of 16% for HAdV, 12% for JCPyV and 17% for NoV GGII. Using spiked samples, the viral recoveries were estimated at 30-95% for HAdV, 55-90% for JCPyV and 45-50% for NoV GGII. ESMP was validated in a field study using twelve 24-h composite sewage samples collected in an urban sewage treatment plant in the North of Spain that reported 100% positive samples with mean values of HAdV, JCPyV and NoV GGII similar to those observed in other studies. Although all of the methods compared in this work yield consistently high values of virus detection and recovery in urban sewage, some require expensive laboratory equipment. ESMP is an effective low-cost procedure which allows a large number of samples to be processed simultaneously and is easily standardizable for its performance in a routine laboratory working in water monitoring. Moreover, in the present study, a CV was applied and proposed as a parameter to evaluate and compare the methods for detecting viruses in sewage samples.

New methods for the concentration of viruses from urban sewage using quantitative PCR.

Viruses are among the most important pathogens present in water contaminated with feces or urine and represent a serious risk to human health. Four procedures for concentrating viruses from sewage have been compared in this work, three of which were developed in the present study. Viruses were quantified using PCR techniques. According to statistical analysis and the sensitivity to detect human adenoviruses (HAdV), JC polyomaviruses (JCPyV) and noroviruses genogroup II (NoV GGII): (i) a new procedure (elution and skimmed-milk flocculation procedure (ESMP)) based on the elution of the viruses with glycine-alkaline buffer followed by organic flocculation with skimmed-milk was found to be the most efficient method when compared to (ii) ultrafiltration and glycine-alkaline elution, (iii) a lyophilization-based method and (iv) ultracentrifugation and glycine-alkaline elution. Through the analysis of replicate sewage samples, ESMP showed reproducible results with a coefficient of variation (CV) of 16% for HAdV, 12% for JCPyV and 17% for NoV GGII. Using spiked samples, the viral recoveries were estimated at 30-95% for HAdV, 55-90% for JCPyV and 45-50% for NoV GGII. ESMP was validated in a field study using twelve 24-h composite sewage samples collected in an urban sewage treatment plant in the North of Spain that reported 100% positive samples with mean values of HAdV, JCPyV and NoV GGII similar to those observed in other studies. Although all of the methods compared in this work yield consistently high values of virus detection and recovery in urban sewage, some require expensive laboratory equipment. ESMP is an effective low-cost procedure which allows a large number of samples to be processed simultaneously and is easily standardizable for its performance in a routine laboratory working in water monitoring. Moreover, in the present study, a CV was applied and proposed as a parameter to evaluate and compare the methods for detecting viruses in sewage samples.

Equivalent representation form of oscillators with elastic and damping nonlinear terms

In this work we consider the nonlinear equivalent representation form of oscillators that exhibit nonlinearities in both the elastic and the damping terms. The nonlinear damping effects are considered to be described by fractional power velocity terms which provide better predictions of the dissipative effects observed in some physical systems. It is shown that their effects on the system dynamics response are equivalent to a shift in the coefficient of the linear damping term of a Duffing oscillator. Then, its numerical integration predictions, based on its equivalent representation form given by the well-known forced, damped Duffing equation, are compared to the numerical integration values of its original equations of motion. The applicability of the proposed procedure is evaluated by studying the dynamics response of four nonlinear oscillators that arise in some engineering applications such as nanoresonators, microresonators, human wrist movements, structural engineering design, and chain dynamics of polymeric materials at high extensibility, among others