Research on the suitability of organosolv semi-chemical triticale fibers as reinforcement for recycled hdpe composites

The main objective of this research was to study the feasibility of incorporating organosolv semi-chemical triticale fibers as the reinforcing element in recycled high density polyethylene (HDPE). In the first step, triticale fibers were characterized in terms of chemical composition and compared with other biomass species (wheat, rye, softwood, and hardwood). Then, organosolv semi-chemical triticale fibers were prepared by the ethanolamine process. These fibers were characterized in terms of its yield, kappa number, fiber length/diameter ratio, fines, and viscosity; the obtained results were compared with those of eucalypt kraft pulp. In the second step, the prepared fibers were examined as a reinforcing element for recycled HDPE composites. Coupled and non-coupled HDPE composites were prepared and tested for tensile properties. Results showed that with the addition of the coupling agent maleated polyethylene (MAPE), the tensile properties of composites were significantly improved, as compared to non-coupled samples and the plain matrix. Furthermore, the influence of MAPE on the interfacial shear strength (IFSS) was studied. The contributions of both fibers and matrix to the composite strength were also studied. This was possible by the use of a numerical iterative method based on the Bowyer-Bader and Kelly-Tyson equations

Environmental Tax on Products and Services Based on Their Carbon Footprint: A Case Study of the Pulp and Paper Sector

The main aim of this work is to define an environmental tax on products and services based on their carbon footprint. We examine the relevance of conventional life cycle analysis (LCA) and environmentally extended input-output analysis (EIO) as methodological tools to identify emission intensities of products and services on which the tax is based. The short-term price effects of the tax and the policy implications of considering non-GHG are also analyzed. The results from the specific case study on pulp production show that the environmental tax rate based on the LCA approach (1,8%) is higher than both EIO approaches (0,8% for product and 1,4% for industry approach), but they are comparable. Even though LCA is more product specific and provides detailed analysis, EIO would be the more relevant approach to apply economy wide environmental tax. When the environmental tax considers non-GHG emissions instead of only CO2, sectors such as agriculture, mining of coal and extraction of peat, and food exhibit higher environmental tax and price effects. Therefore, it is worthwhile for policy makers to pay attention on the implication of considering only CO2 tax or GHG emissions tax in order for such a policy measure to be effective and meaningful. Keywords: Environmental tax; Life cycle analysis; Environmental input-output analysis.

Estudi de la tractabilitat d'efluents procedents del blanqueig de polpa kraft

L’objectiu d’aquest projecte és centra en l’estudi de la tratabilitat dels efluentsprocedents del blanqueig de polpa kraft per tal de poder-los reutilitzar de nou a lafàbrica.

Stone-ground wood pulp-reinforced polypropylene composites: water uptake and thermal properties

Two of the drawbacks of using natural-based composites in industrial applications are thermal instability and water uptake capacity. In this work, mechanical wood pulp was used to reinforce polypropylene at a level of 20 to 50 wt. %. Composites were mixed by means of a Brabender internal mixer for both non-coupled and coupled formulations. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to determine the thermal properties of the composites. The water uptake behavior was evaluated by immersion of the composites in water until an equilibrium state was reached. Results of water absorption tests revealed that the amount of water absorption was clearly dependent upon the fiber content. The coupled composites showed lower water absorption compared to the uncoupled composites. The incorporation of mechanical wood pulp into the polypropylene matrix produced a clear nucleating effect by increasing the crystallinity degree of the polymer and also increasing the temperature of polymer degradation. The maximum degradation temperature for stone ground wood pulp–reinforced composites was in the range of 330 to 345 ºC

Synthesis and characterization of kraft lignin-based epoxy resins

Epoxidization is an interesting way to develop a new application of lignin and therefore to improve its application potential. In this work, kraft lignin-based epoxy resins were obtained by the epoxidization reaction, using the kraft lignin recovered directly from pulping liquor and modified by a methylolation reaction. The methylolated lignins were obtained by the reaction of original kraft lignin with formaldehyde and glyoxal, which is a less volatile and less toxic aldehyde. 1H-NMR spectroscopy showed that methylolated kraft lignin has more hydroxymethyl groups than glyoxalated kraft lignin. For the epoxidization reaction we studied the influence of the lignin:NaOH (w/w) ratio, temperature, and time of the reaction on the properties of the prepared epoxidized lignins. The structures of lignin-based epoxy resins were followed by epoxy index test and FTIR spectroscopy. Optimal conditions were obtained for lignin-based epoxy resin produced at lignin/NaOH = 1/3 at 70 ºC for 3h. Thermogravimetry analysis (TGA) revealed that the epoxidization enhances the thermal stability of lignins and may allow a wider temperature range for applications with lignin epoxy-PF blends

Low environmental impact bleaching sequences for attaining high brightness level with eucalyptus SPP pulp

The alternatives used for minimizing the usage of chlorine dioxide in bleaching sequences included a hot acid hydrolysis (Ahot) stage, the use of hot chlorine dioxide (Dhot) and ozone stages at medium consistency and high consistency (Zmc and Zhc), in addition to stages with atmospheric hydrogen peroxide (P) and pressurized hydrogen peroxide (PO). The results were interpreted based on the cost of the chemical products, bleaching process yields and on minimizing the environmental impact of the bleaching process. In spite of some process restrictions, high ISO brightness levels were kept around 90 % brightness. Additionally, the inclusion of stages like acid hydrolysis, pressurized peroxide and ozone in the bleaching sequences provided an increase in operating flexibility, aimed at reducing environmental impact (ECF Light). The Dhot(EOP)D(PO) sequence presented lower operating cost for ISO brightness above 92 %. However, this kind of sequence was not allowed for closing the wastewater circuit, even partially. For ISO brightness level around 91%, the AhotZhcDP sequence presented a lower operating cost than the others

Entrevistant infants pre-escolars víctimes d’abús sexual i/o maltractament familiar : Eficàcia dels models d’entrevista forense

Entrevistant infants pre-escolars víctimes d’abús sexual i/o maltractament familiar: eficàcia dels models d’entrevista forense Entrevistar infants en edat preescolar que han viscut una situació traumàtica és una tasca complexa que dins l’avaluació psicològica forense necessita d’un protocol perfectament delimitat, clar i temporalitzat. Per això, s’han seleccionat 3 protocols d’entrevista: el Protocol de Menors (PM) de Bull i Birch, el model del National Institute for Children Development (NICHD) de Michel Lamb, a partir del qual es va desenvolupar l’EASI (Evaluación del Abuso Sexual Infantojuvenil) i l’Entrevista Cognitiva (EC) de Fisher i Geiselman. La hipòtesi de partida vol comprovar si els anteriors models permeten obtenir volums informatius diferents en infants preescolars. Conseqüentment, els objectius han estat determinar quin dels models d’entrevista permet obtenir un volum informatiu amb més precisions i menys errors, dissenyar un model d’entrevista propi i consensuar aquest model. En el treball s’afegeixen esquemes pràctics que facilitin l’obertura, desenvolupament i tancament de l’entrevista forense. La metodologia ha reproduït el binomi infant - esdeveniment traumàtic, mitjançant la visualització i l’explicació d’un fet emocionalment significatiu amb facilitat per identificar-se: l’accident en bicicleta d’un infant que cau, es fa mal, sagna i el seu pare el cura. A partir d’aquí, hem entrevistat 135 infants de P3, P4 i P5, mitjançant els 3 models d’entrevista referits, enfrontant-los a una demanda específica: recordar i narrar aquest esdeveniment. S’ha conclòs que el nivell de record correcte, quan s’utilitza un model d’entrevista adequat amb els infants en edat preescolar, oscil•la entre el 70-90%, fet que permet defensar la confiança en els records dels infants. Es constata que el percentatge d’emissions incorrectes dels infants en edat preescolar és mínim, al voltant d’un 5-6%. L’estudi remarca la necessitat d’establir perfectament les regles de l’entrevista i, per últim, en destaca la ineficàcia de les tècniques de memòria de l’entrevista cognitiva en els infants de P3 i P4. En els de P5 es comencen a veure beneficis gràcies a la tècnica de la reinstauració contextual (RC), estant les altres tècniques fora de la comprensió i utilització dels infants d’aquestes edats. Interviewing preschoolers victims of sexual abuse and/or domestic abuse: Effectiveness of forensic interviews models 135 preschool children were interviewed with 3 different interview models in order to remember a significant emotional event. Authors conclude that the correct recall of children ranging from 70-90% and the percentage of error messages is 5-6%. It is necessary to fully establish the rules of the interview. The present research highlights the effectiveness of the cognitive interview techniques in children from P3 and P4. Entrevistando niños preescolares víctimas de abuso sexual y/o maltrato familiar: eficacia de los modelos de entrevista forense Se han entrevistado 135 niños preescolares con 3 modelos de entrevista diferentes para recordar un hecho emocionalmente significativo. Se concluye que el recuerdo correcto de los niños oscila entre el 70-90% y el porcentaje de errores de mensajes es del 5-6%. El estudio remarca la necesidad de establecer perfectamente las reglas de la entrevista y se destaca la ineficacia de las técnicas de la entrevista cognitiva en los niños de P3 y P4.

Entrevistando a niños preescolares víctimas de abuso sexual y/o maltrato familiar : Eficacia de los modelos de entrevista forense

Entrevistando niños preescolares víctimas de abuso sexual y/o maltrato familiar: eficacia de los modelos de entrevista forense Se han entrevistado 135 niños preescolares con 3 modelos de entrevista diferentes para recordar un hecho emocionalmente significativo. Se concluye que el recuerdo correcto de los niños oscila entre el 70-90% y el porcentaje de errores de mensajes es del 5-6%. El estudio remarca la necesidad de establecer perfectamente las reglas de la entrevista y se destaca la ineficacia de las técnicas de la entrevista cognitiva en los niños de P3 y P4. Entrevistant infants pre-escolars víctimes d’abús sexual i/o maltractament familiar: eficàcia dels models d’entrevista forense Entrevistar infants en edat preescolar que han viscut una situació traumàtica és una tasca complexa que dins l’avaluació psicològica forense necessita d’un protocol perfectament delimitat, clar i temporalitzat. Per això, s’han seleccionat 3 protocols d’entrevista: el Protocol de Menors (PM) de Bull i Birch, el model del National Institute for Children Development (NICHD) de Michel Lamb, a partir del qual es va desenvolupar l’EASI (Evaluación del Abuso Sexual Infantojuvenil) i l’Entrevista Cognitiva (EC) de Fisher i Geiselman. La hipòtesi de partida vol comprovar si els anteriors models permeten obtenir volums informatius diferents en infants preescolars. Conseqüentment, els objectius han estat determinar quin dels models d’entrevista permet obtenir un volum informatiu amb més precisions i menys errors, dissenyar un model d’entrevista propi i consensuar aquest model. En el treball s’afegeixen esquemes pràctics que facilitin l’obertura, desenvolupament i tancament de l’entrevista forense. La metodologia ha reproduït el binomi infant - esdeveniment traumàtic, mitjançant la visualització i l’explicació d’un fet emocionalment significatiu amb facilitat per identificar-se: l’accident en bicicleta d’un infant que cau, es fa mal, sagna i el seu pare el cura. A partir d’aquí, hem entrevistat 135 infants de P3, P4 i P5, mitjançant els 3 models d’entrevista referits, enfrontant-los a una demanda específica: recordar i narrar aquest esdeveniment. S’ha conclòs que el nivell de record correcte, quan s’utilitza un model d’entrevista adequat amb els infants en edat preescolar, oscil•la entre el 70-90%, fet que permet defensar la confiança en els records dels infants. Es constata que el percentatge d’emissions incorrectes dels infants en edat preescolar és mínim, al voltant d’un 5-6%. L’estudi remarca la necessitat d’establir perfectament les regles de l’entrevista i, per últim, en destaca la ineficàcia de les tècniques de memòria de l’entrevista cognitiva en els infants de P3 i P4. En els de P5 es comencen a veure beneficis gràcies a la tècnica de la reinstauració contextual (RC), estant les altres tècniques fora de la comprensió i utilització dels infants d’aquestes edats. Interviewing preschoolers victims of sexual abuse and/or domestic abuse: Effectiveness of forensic interviews models 135 preschool children were interviewed with 3 different interview models in order to remember a significant emotional event. Authors conclude that the correct recall of children ranging from 70-90% and the percentage of error messages is 5-6%. It is necessary to fully establish the rules of the interview. The present research highlights the effectiveness of the cognitive interview techniques in children from P3 and P4.

Disseny i muntatge d'un sistema de depuració ciclònica per reciclatge de paper

El projecte s’emmarca dins de l’àmbit de la indústria paperera, i dins el procés defabricació del paper es centra concretament amb l’etapa de la depuració ciclònica, una etapa en la qual es pretenen eliminar aquelles partícules sòlides que acompanyen la pasta de paper i que no són desitjables ja que afecten les característiques del paper i el funcionament de la resta d’equips del procés de fabricació. Es presenta una demanda de projecte per part del grup LEPAMAP (Laboratori d’Enginyeria Paperera i Materials Polímers) sobre el disseny d’una instal•lació de depuració ciclònica, mitjançant un hidrocicló, per realitzar activitats de recerca. Un hidrocicló és un equip que separa gràcies a la força centrífuga del flux d’entrada i pel seu disseny amb forma de con invertit. Així doncs, els objectius bàsics d’aquest projecte són dissenyar una instal•lació de depuració adequada per depurar una pasta de paper de possibles contaminants sòlids, la qual cosa implica el disseny d’una bomba centrífuga per impulsar el flux cap a l’interior de l’hidrocicló, dipòsits per emmagatzemar i preparar la suspensió, un agitador per mantenir en tot moment la homogeneïtat de la suspensió i uns dispositius de mesura i control per mesurar i controlar variables com el cabal, la pressió o el volum.El segon objectiu tracta de posar en marxa la instal•lació i comprovar si aquest equip,l’hidrocicló, separa correctament les partícules sòlides del flux de pasta.Paral•lelament s’ha estudiat quins són els equips de depuració més importants a laindústria paperera així com les etapes més importants que formen part del procés de fabricació del paper

Materials nanocomposits a partir de whiskers de cel•lulosa i matriu polimèrica de cautxú

De acuerdo con los objetivos generales del proyecto y plan de trabajo previsto, para esta anualidad, se obtuvieron fibras y microfibras de celulosa a partir de dos fuentes: celulosa vegetal de pino y eucalipto y celulosa bacterial. Las microfibrillas han sido utilizadas como material de refuerzo para la fabricación de materiales compuestos a partir de caucho natural, policaprolactona y polivinil alcohol. Las muestras se fabricaron mediante la técnica de "casting" en medio acuoso y temperatura ambiente. Las muestras fueron caracterizados en sus propiedades mecánicas, físicas y térmicas. Se observó que, en general, la adición de las microfibrillas de celulosa en las matrices poliméricas provoca una mejora sustancial en las propiedades mecánicas del material en comparación con el polímero sin reforzar. Los resultados pueden resumirse de la siguiente manera: 1.Fabricación de materiales compuestos a base de caucho natural y fibras de celulosa. Se obtuvieron fibras y nanofibras de celulosa que fueron modificadas químicamente y usadas como refuerzo en matriz de caucho. Los resultados mostraron mejora de propiedades mecánicas del material, principalmente en los materiales compuestos reforzados con nanofibras. 2. Obtención de whiskers de celulosa y su utilización como material de refuerzo en una matriz de policaprolactona. Se obtuvieron whiskers de celulosa a partir de pasta blanqueada. La adición en una matriz de policaprolactona produjo materiales compuestos con propiedades mecánicas superiores a la matriz, con buena dispersión de los whiskers. 3. Obtención de fibras de celulosa bacterial y nanofibras de celulosa, aislamiento y utilización sobre una matriz de polivinil alcohol. Se obtuvo celulosa bacterial a partir de la bacteria Gluconacetobacter xylinum. Además se fabricaron nanofibras de celulosa a partir eucalipto blanqueado. La celulosa bacterial como material de refuerzo no produjo importantes mejoras en las propiedades mecánicas de la matriz; en cambio se observaron mejoras destacables con la nanofibra como refuerzo.

Acoustic properties of polypropylene composites reinforced with stone groundwood

Currently, acoustic isolation is one of the problems raised with building construction in Spain. The publication of the Basic Document for the protection against noise of the Technical Building Code has increased the demand of comfort for citizens. This has created the need to seek new composite materials that meet the new required acoustical building codes. In this paper we report the results of the newly developed composites that are able to improve the acoustic isolation of airborne noise. These composites were prepared from polypropylene (PP) reinforced with mechanical pulp fibers from softwood (Pinus radiata). Mechanical and acoustical properties of the composites from mechanical pulp (MP) and polypropylene (PP) have been investigated and compared to fiberglass (FG) composites. MP composites had lower tensile properties compared with FG composites, although these properties can be improved by incorporation of a coupling agent. The results of acoustical properties of MP composites were reported and compared with the conventional composites based on fiberglass and gypsum plasterboards. Finally, we suggest the application of MP composites as a light-weight building material to reduce acoustic transmitions

Estudi de reactius químics alternatius per al blanqueig de pastes termomecàniques : efecte en les propietats òptiques de les pastes i en la qualitat dels efluents del procés

Aquest estudi s’emmarca en un projecte titulat “Noves possibilitats en el blanqueig en lespastes destintades: Alternatives al blanqueig amb sosa càustica i peròxid d’hidrogen” i estàsubvencionat per diverses empreses europees del sector. La seva realització s’ha dut a termeen el Centre Technique du Papier, a Grenoble, França. L’estudi contempla la realitzaciód’una part del projecte, i té per objecte analitzar els Na2SiO3 modificats, el hidròxid demagnesi (Mg(OH)2) i el hidròxid de calci (Ca(OH)2) per veure si poden actuar com asubstituts del NaOH. Cal intentar aconseguir valors de blancor similars als assolits amb elblanqueig estàndard i millorar substancialment la qualitat de les aigües. Segons el centre derecerca es pot considerar una millora projectable a nivell industrial una reducció de la DQO ide la demanda catiònica a partir d’un 10% a nivell experimental.La pasta que es blanqueja és TMP verge. Els resultats obtinguts a nivell de blancor tambépoden ser considerats aplicables en paper recuperat, prèviament destintat, provenintd’aquest tipus de pasta

The suitability of steam exploded vitis vinifera and alkaline lignin for the manufacture of fiberboard

The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications

Characterization of alkaline lignins for use in penol-formaldehyde and epoxy resins

Besides polyurethanes and polyesters, phenolic and epoxy resins are the most prominent applications for technical lignins in thermosetting materials. To evaluate the potential application of lignin raw materials in phenol formaldehyde and epoxy resins, three types of alkaline lignins were characterized in terms of their structures and thermal properties. The lignin samples analyzed were kraft lignin (LIG-1), soda–rice straw lignin (LIG-2), and soda-wheat straw lignin (LIG-3). FTIR and 1H-NMR methods were used to determine their structure. Gel permeation chromatography (GPC) was used to determine the molecular weight distribution (MWD). Differential scanning calorimetry (DSC) was used to measure the glass transition temperature (Tg), and thermogravimetric analysis (TGA) to determine the thermal stability of lignin samples. Results showed that kraft lignin (LIG-1) has moderate hydroxyl-group content, is rich in G-type units, and has good thermal stability. These properties make it more suitable for direct use in phenol formaldehyde resins, and it is therefore a good raw material for this purpose. The alkaline soda-rice straw lignin (LIG-2) with a high hydroxyl-group content and excellent thermal stability is most suited to preparing lignin-based epoxy resin

A Neanderthal Lower Incisor from Cova del Gegant (Sitges, Barcelona, Spain)

Cova del Gegant is located near the city of Sitges (Barcelona, Spain). The cave is a small karst system which contains Upper Pleistocene archaeological and paleontological material (DauRa et al., 2005). The site was first excavated in 1954 and then in 1972 and 1974- (Viñas, 1972; Viñas & Villalta, 1975) and in 1985 and 1989 (maRtínez et al., 1985; moRa, 1988; maRtínez et al., 1990). Finally, in 2007, Grup de Recerca del Quaternari has restarted the archaeological research at Cova del Gegant (DauRa, 2008; DauRa et al., 2010). A human mandible was recovered during the first field season in 1954 and was recently published by DauRa et al. (2005). In the present study, we describe a new human tooth (left I2) that appeared, like the mandible, in a revision of the faunal material recovered from the site in 1974-1975. The specimen preserves the entire crown and the cervical two thirds of the root (Figure 1). The lack of the root apex makes it difficult to determine if the tooth was fully developed at the time of death. However, CT analysis reveals a pulp cavity that could be still open, suggesting root formation was incomplete. The specimen shows only slight dental wear corresponding to stage 2 of Molnar (1971 en Hillson, 1996). Morphologically, the crown shows slight shovelling and a lingual tubercle and appears similar to Neandertal incisors. Standard crown measurements (buccolingual diameter=7.7 mm; mesiodistal diameter= 7.3 mm) (Figure 2) suggest a fairly large tooth, particularly in the BL dimension, again resembling Neandertals in this regard. Discriminant analysis classified the Gegant incisor as Neandertal with a 99.8% posterior probability (Table 2). Association of this tooth with the previously described mandible is considered unlikely given the different ages at death estimated for each. Thus, there appear to be two individuals preserved in the sediments of the Gegant cave, one adult and one subadult (around 8-10 years old).