A new automated method versus continuous positive airway pressure method for measuring pressure-volume curves in patients with acute lung injury

Objective: To compare pressure–volume (P–V) curves obtained with the Galileo ventilator with those obtained with the CPAP method in patients with ALI or ARDS receiving mechanical ventilation. P–V curves were fitted to a sigmoidal equation with a mean R2 of 0.994 ± 0.003. Lower (LIP) and upper inflection (UIP), and deflation maximum curvature (PMC) points calculated from the fitted variables showed a good correlation between methods with high intraclass correlation coefficients. Bias and limits of agreement for LIP, UIP and PMC obtained with the two methods in the same patient were clinically acceptable.

Automated Segmentation of Cerebral Vasculature with Aneurysms in 3DRA and TOF-MRA using Geodesic Active Regions: an Evaluation Study

Purpose: To evaluate the suitability of an improved version of an automatic segmentation method based on geodesic active regions (GAR) for segmenting cerebral vasculature with aneurysms from 3D X-ray reconstruc-tion angiography (3DRA) and time of °ight magnetic resonance angiography (TOF-MRA) images available in the clinical routine.Methods: Three aspects of the GAR method have been improved: execution time, robustness to variability in imaging protocols and robustness to variability in image spatial resolutions. The improved GAR was retrospectively evaluated on images from patients containing intracranial aneurysms in the area of the Circle of Willis and imaged with two modalities: 3DRA and TOF-MRA. Images were obtained from two clinical centers, each using di®erent imaging equipment. Evaluation included qualitative and quantitative analyses ofthe segmentation results on 20 images from 10 patients. The gold standard was built from 660 cross-sections (33 per image) of vessels and aneurysms, manually measured by interventional neuroradiologists. GAR has also been compared to an interactive segmentation method: iso-intensity surface extraction (ISE). In addition, since patients had been imaged with the two modalities, we performed an inter-modality agreement analysis with respect to both the manual measurements and each of the two segmentation methods. Results: Both GAR and ISE di®ered from the gold standard within acceptable limits compared to the imaging resolution. GAR (ISE, respectively) had an average accuracy of 0.20 (0.24) mm for 3DRA and 0.27 (0.30) mm for TOF-MRA, and had a repeatability of 0.05 (0.20) mm. Compared to ISE, GAR had a lower qualitative error in the vessel region and a lower quantitative error in the aneurysm region. The repeatabilityof GAR was superior to manual measurements and ISE. The inter-modality agreement was similar between GAR and the manual measurements. Conclusions: The improved GAR method outperformed ISE qualitatively as well as quantitatively and is suitable for segmenting 3DRA and TOF-MRA images from clinical routine.

Three-dimensional morphological analysis of intracranial aneurysms: a fully automated method for aneurysm sac isolation and quantification

Morphological descriptors are practical and essential biomarkers for diagnosis andtreatment selection for intracranial aneurysm management according to the current guidelinesin use. Nevertheless, relatively little work has been dedicated to improve the three-dimensionalquanti cation of aneurysmal morphology, automate the analysis, and hence reduce the inherentintra- and inter-observer variability of manual analysis. In this paper we propose a methodologyfor the automated isolation and morphological quanti cation of saccular intracranial aneurysmsbased on a 3D representation of the vascular anatomy.

A fully automated hot-wall multiplasma-monochamber reactor for thin film deposition

We present a study on the development and the evaluation of a fully automated radio-frequency glow discharge system devoted to the deposition of amorphous thin film semiconductors and insulators. The following aspects were carefully addressed in the design of the reactor: (1) cross contamination by dopants and unstable gases, (2) capability of a fully automated operation, (3) precise control of the discharge parameters, particularly the substrate temperature, and (4) high chemical purity. The new reactor, named ARCAM, is a multiplasma-monochamber system consisting of three separated plasma chambers located inside the same isothermal vacuum vessel. Thus, the system benefits from the advantages of multichamber systems but keeps the simplicity and low cost of monochamber systems. The evaluation of the reactor performances showed that the oven-like structure combined with a differential dynamic pumping provides a high chemical purity in the deposition chamber. Moreover, the studies of the effects associated with the plasma recycling of material from the walls and of the thermal decomposition of diborane showed that the multiplasma-monochamber design is efficient for the production of abrupt interfaces in hydrogenated amorphous silicon (a-Si:H) based devices. Also, special attention was paid to the optimization of plasma conditions for the deposition of low density of states a-Si:H. Hence, we also present the results concerning the effects of the geometry, the substrate temperature, the radio frequency power and the silane pressure on the properties of the a-Si:H films. In particular, we found that a low density of states a-Si:H can be deposited at a wide range of substrate temperatures (100°C

Automated monitoring of medical protocols: a secure and distributed architecture

The control of the right application of medical protocols is a key issue in hospital environments. For the automated monitoring of medical protocols, we need a domain-independent language for their representation and a fully, or semi, autonomous system that understands the protocols and supervises their application. In this paper we describe a specification language and a multi-agent system architecture for monitoring medical protocols. We model medical services in hospital environments as specialized domain agents and interpret a medical protocol as a negotiation process between agents. A medical service can be involved in multiple medical protocols, and so specialized domain agents are independent of negotiation processes and autonomous system agents perform monitoring tasks. We present the detailed architecture of the system agents and of an important domain agent, the database broker agent, that is responsible of obtaining relevant information about the clinical history of patients. We also describe how we tackle the problems of privacy, integrity and authentication during the process of exchanging information between agents.

Structure of a-Si:H/a-Si1-xCx:H multilayers deposited in a reactor with automated substrate holder

This paper deals with the structural properties of a-Si:H/a-Si1-xCx: H multilayers deposited by glow-discharge decomposition of SiH4 and SiH4 and CH4 mixtures. The main feature of the rf plasma reactor is an automated substrate holder. The plasma stabilization time and its influence on the multilayer obtained is discussed. A series of a-Si:H/a-Si1-xCx: H multilayers has been deposited and characterized by secondary ion mass spectrometry (SIMS), X-ray diffraction (XRD) and transmission electron microscopy (TEM). No asymmetry between the two types of interface has been observed. The results show that the multilayers present a very good periodicity and low roughness. The difficulty of determining the abruptness of the multilayer at the nanometer scale is discussed.

Towards automated specifications of scenarios in enhanced learning technology

Recent standardization efforts in e-learning technology have resulted in a number of specifications, however, the automation process that is considered essential in a learning management system (LMS) is a lessexplored one. As learning technology becomes more widespread and more heterogeneous, there is a growing need to specify processes that cross the boundaries of a single LMS or learning resource repository. This article proposes to obtain a specification orientated to automation that takes on board the heterogeneity of systems and formats and provides a language for specifying complex and generic interactions. Having this goal in mind, a technique based on three steps is suggested. The semantic conformance profiles, the business process management (BPM) diagram, and its translation into the business process execution language (BPEL) seem to be suitable for achieving it.

An ontology to automated learning scenarios? an approach to its knowledge domain

Automation or semi-automation of learning scenariospecifications is one of the least exploredsubjects in the e-learning research area. There isa need for a catalogue of learning scenarios and atechnique to facilitate automated retrieval of stored specifications. This requires constructing anontology with this goal and is justified inthis paper. This ontology must mainlysupport a specification technique for learning scenarios. This ontology should also be useful in the creation and validation of new scenarios as well as in the personalization of learning scenarios or their monitoring. Thus, after justifying the need for this ontology, a first approach of a possible knowledge domain is presented. An example of a concrete learning scenario illustrates some relevant concepts supported by this ontology in order to define the scenario in such a way that it could be easy to automate.

Estudio para la extracción automatizada de contextos de significancia en JPEG2000

Se ha desarrollado un trabajo de investigación para arrojar un haz de luz en ciertas regiones de interés en la codificación del estándar JPEG2000. La finalidad de esta investigación, es estudiar la posibilidad de realizar una extracción automatizada de contextos durante el proceso de codificación, de modo que se ajusten a la imagen procesada y observar qué ventajas nos aporta esto frente a los contextos establecidos por el estándar JPEG2000.

Una primera aproximació a la selecció d'un sistema automatitzat de biblioteques

Res no pot garantir que un procés de selecció d'un sistema automatitzat arribi a tenir èxit, però l'observació d'un conjunt de principis de sentit comú pot ajudar a assegurar l'èxit del resultat. El procés ha de centrar-se en el llarg termini i ha de tenir present el context institucional en el qual el sistema s'establirà. Els sistemes estan cada vegada més orientats als usuaris, i per tant el compromís dels usuaris en el procés de selecció és més i més important. Els components del procés de selecció poden ser previstos i combinats de moltes maneres diferents. El procediment usat per les Purdue University Libraries serveix per a il·lustrar una via en la realització pràctica d'un procés.

Automatización de la gestión del ciclo de vida de entornos Linux y Solaris

Los requisitos del Negocio que requieren un gran crecimiento generan mayor complejidad en los Centros de Cómputo.Son los administradores quienes necesitan gestionar el creciente volumen de datos, aplicaciones, y usuarios, así como la rápida proliferación de los servidores y los diferentes sistemas operativos. En este proyecto se pretende reducir la complejidad en la gestión de los Centros de Cómputo, combinando la automatización de la gestión del ciclo de vida y todas las medidas de contingencia necesarias para mantener la integridad de los mismos.

Testing low-altitude infrared digital photography from a mini-UAV to retrieve information for biological conservation

Satellite remote sensing imagery is used for forestry, conservation and environmental applications, but insufficient spatial resolution, and, in particular, unavailability of images at the precise timing required for a given application, often prevent achieving a fully operational stage. Airborne remote sensing has the advantage of custom-tuned sensors, resolution and timing, but its price prevents using it as a routine technique for the mentioned fields. Some Unmanned Aerial Vehicles might provide a “third way” solution as low-cost techniques for acquiring remotely sensed information, under close control of the end-user, albeit at the expense of lower quality instrumentation and instability. This report evaluates a light remote sensing system based on a remotely-controlled mini-UAV (ATMOS-3) equipped with a color infra-red camera (VEGCAM-1) designed and operated by CATUAV. We conducted a testing mission over a Mediterranean landscape dominated by an evergreen woodland of Aleppo pine (Pinus halepensis) and (Holm) oak (Quercus ilex) in the Montseny National Park (Catalonia, NE Spain). We took advantage of state-of-the-art ortho-rectified digital aerial imagery (acquired by the Institut Cartogràfic de Catalunya over the area during the previous year) and used it as quality reference. In particular, we paid attention to: 1) Operationality of flight and image acquisition according to a previously defined plan; 2) Radiometric and geometric quality of the images; and 3) Operational use of the images in the context of applications. We conclude that the system has achieved an operational stage regarding flight activities, although with meteorological limits set by wind speed and turbulence. Appropriate landing areas can be sometimes limiting also, but the system is able to land on small and relatively rough terrains such as patches of grassland or short matorral, and we have operated the UAV as far as 7 km from the control unit. Radiometric quality is sufficient for interactive analysis, but probably insufficient for automated processing. A forthcoming camera is supposed to greatly improve radiometric quality and consistency. Conventional GPS positioning through time synchronization provides coarse orientation of the images, with no roll information.

Aprenentatges i oportunitats després de la implementació d'un nou sistema automatitzat

Es descriuen els aprenentatges, canvis i oportunitats arrel del procés de canvi del sistema de gestió de biblioteques del CCUC i dels altres catàlegs del CBUC. S’inicia amb una introducció sobre la decisió d’emprendre conjuntament el procés de canvi de sistema i com es va planificar i organitzar la seva implementació. Detalla actuacions prèvies que es van realitzar com el procés de canvi de format MARC, descriu el nou entorn que aquest canvi permet al CBUC, com oferir la gestió, hostatjament i manteniment de sistemes automatitzats per catàlegs locals i relaciona les millores d’OPAC. Finalment s'elaboren unes consideracions generals sobre els aprenentatges i oportunitats arrel d’aquest procés, amb la finalitat que siguin d’utilitat en futures experiències similars.

Desarrollo de un sistema integrado de navegación inercial: interfície IMU + FPGA

Els sistemes automatitzats que requereixen d’un control d’estabilitat o moviment es poden trobar cada cop en més àmbits. Aplicacions UAV o de posicionament global són les més comunes per aquest tipus de sistemes, degut a que necessiten d’un control de moviment molt precís. Per a dur a terme aquest procés s’utilitzen unitats de mesura inercial, que mitjançant acceleròmetres i giroscopis degudament posicionats, a més a més d’una correcció del possible error que puguin introduir aquests últims, proporcionen una acceleració i una velocitat angular de les quals es pot extreure el camí efectuat per aquestes unitats. La IMU, combinada amb un GPS i mitjançant un filtre de Kalman, proporcionen una major exactitud , a més d’un punt de partida (proporcionat per el GPS), un recorregut representable en un mapa y, en el cas de perdre la senyal GPS, poder seguir adquirint dades de la IMU. Aquestes dades poden ser recollides i processades per una FPGA, que a la vegada podem sincronitzar amb una PDA per a que l’usuari pugui veure representat el moviment del sistema. Aquest treball es centra en el funcionament de la IMU i l’adquisició de dades amb la FPGA. També introdueix el filtre de Kalman per a la correcció de l’error dels sensors.

Desenvolupament d'eines d'alta ressolució per al cribatge (screening) de l'activitat de fàrmacs

Projecte de recerca elaborat a partir d’una estada a la Satandford University, EEUU, entre 2007 i 2009. Els darrers anys, hi ha hagut un avanç espectacular en la tecnologia aplicada a l’anàlisi del genoma i del proteoma (microarrays, PCR quantitativa real time, electroforesis dos dimensions, espectroscòpia de masses, etc.) permetent la resolució de mostres complexes i la detecció quantitativa de diferents gens i proteïnes en un sol experiment. A més a més, la seva importància radica en la capacitat d’identificar potencials dianes terapèutiques i possibles fàrmacs, així com la seva aplicació en el disseny i desenvolupament de noves eines de diagnòstic. L’aplicabilitat de les tècniques actuals, però, està limitada al nivell al que el teixit pot ser disseccionat. Si bé donen valuosa informació sobre expressió de gens i proteïnes implicades en una malaltia o en resposta a un fàrmac per exemple, en cap cas, s’obté una informació in situ ni es pot obtenir informació espacial o una resolució temporal, així com tampoc s’obté informació de sistemes in vivo. L’objectiu d’aquest projecte és desenvolupar i validar un nou microscopi, d’alta resolució, ultrasensible i de fàcil ús, que permeti tant la detecció de metabòlits, gens o proteïnes a la cèl•lula viva en temps real com l’estudi de la seva funció. Obtenint així una descripció detallada de les interaccions entre proteïnes/gens que es donen dins la cèl•lula. Aquest microscopi serà un instrument sensible, selectiu, ràpid, robust, automatitzat i de cost moderat que realitzarà processos de cribatge d’alt rendiment (High throughput screening) genètics, mèdics, químics i farmacèutics (per aplicacions diagnòstiques i de identificació i selecció de compostos actius) de manera més eficient. Per poder realitzar aquest objectius el microscopi farà ús de les més noves tecnologies: 1)la microscopia òptica i d’imatge, per millorar la visualització espaial i la sensibilitat de l’imatge; 2) la utilització de nous mètodes de detecció incloent els més moderns avanços en nanopartícules; 3) la creació de mètodes informàtics per adquirir, emmagatzemar i processar les imatges obtingudes.