Study of chemical modification of alkaline lignin by the glyoxalation reaction

In this study, glyoxalated alkaline lignins with a non-volatile and non-toxic aldehyde, which can be obtained from several natural resources, namely glyoxal, were prepared and characterized for its use in wood adhesives. The preparation method consisted of the reaction of lignin with glyoxal under an alkaline medium. The influence of reaction conditions such as the molar ratio of sodium hydroxide-to-lignin and reaction time were studied relative to the properties of the prepared adducts. The analytical techniques used were FTIR and 1H-NMR spectroscopies, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Results from both the FTIR and 1H-NMR spectroscopies showed that the amount of introduced aliphatic hydroxyl groups onto the lignin molecule increased with increasing reaction time and reached a maximum value at 10 h, and after they began to decrease. The molecular weights remained unchanged until 10 h of reaction time, and then started to increase, possibly due to the repolymerization reactions. DSC analysis showed that the glass transition temperature (Tg) decreased with the introduction of glyoxal onto the lignin molecule due to the increase in free volume of the lignin molecules. TGA analysis showed that the thermal stability of glyoxalated lignin is not influenced and remained suitable for wood adhesives. Compared to the original lignin, the improved lignin is reactive and a suitable raw material for adhesive formula

The suitability of steam exploded vitis vinifera and alkaline lignin for the manufacture of fiberboard

The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications

Characterization of alkaline lignins for use in penol-formaldehyde and epoxy resins

Besides polyurethanes and polyesters, phenolic and epoxy resins are the most prominent applications for technical lignins in thermosetting materials. To evaluate the potential application of lignin raw materials in phenol formaldehyde and epoxy resins, three types of alkaline lignins were characterized in terms of their structures and thermal properties. The lignin samples analyzed were kraft lignin (LIG-1), soda–rice straw lignin (LIG-2), and soda-wheat straw lignin (LIG-3). FTIR and 1H-NMR methods were used to determine their structure. Gel permeation chromatography (GPC) was used to determine the molecular weight distribution (MWD). Differential scanning calorimetry (DSC) was used to measure the glass transition temperature (Tg), and thermogravimetric analysis (TGA) to determine the thermal stability of lignin samples. Results showed that kraft lignin (LIG-1) has moderate hydroxyl-group content, is rich in G-type units, and has good thermal stability. These properties make it more suitable for direct use in phenol formaldehyde resins, and it is therefore a good raw material for this purpose. The alkaline soda-rice straw lignin (LIG-2) with a high hydroxyl-group content and excellent thermal stability is most suited to preparing lignin-based epoxy resin

Comparative study of algal communities in acid and alkaline waters from Tinto, Odiel and Piedras river basins (SW Spain)

The distribution patterns of benthic algal assemblages in the Tinto, Odiel and Piedras rivers were analyzed during the winter of 2005 in 18 sampling stations. The main objective was to assess and compare the algal communities and parameters affecting them both in the zones affected by acid mine drainage (AMD) and in naturally alkaline waters. A total of 108 benthic diatom taxa and 31 non-diatom taxa were identi ed. Results showed large differences between algal communities in the two environments: Pinnularia acoricola, P. subcapitata and Eunotia exigua were the most frequent diatom taxa in regions affected by acid mine drainage, along with algae like Klebsormidium and Euglena mutabilis were the most relevant non-diatom taxa. In alkaline waters the dominant diatom taxa were Planothidium frequentissimum, Gomphonema angustum, Fragilaria capucina, and some species of Navicula (N. viridula, N. veneta or N. radiosa), accompanied by Oscillatoria and Anabaena as well as by streptophytes of the group of zygnemataceae and desmidiaceae

Ab initio valence-bond cluster model for ionic solids: Alkaline-earth oxides

A linear M-O-M (M=metal, O=oxygen) cluster embedded in a Madelung field, and also including the quantum effects of the neighboring ions, is used to represent the alkaline-earth oxides. For this model an ab initio wave function is constructed as a linear combination of Slater determinants written in an atomic orbital basis set, i.e., a valence-bond wave function. Each valence-bond determinant (or group of determinants) corresponds to a resonating valence-bond structure. We have obtained ab initio valence-bond cluster-model wave functions for the electronic ground state and the excited states involved in the optical-gap transitions. Numerical results are reasonably close to the experimental values. Moreover, the model contains the ionic model as a limiting case and can be readily extended and improved.

Measures of ionicity of alkaline-earth oxides from the analysis of ab initio cluster wave functions

We present an analysis of the M-O chemical bonding in the binary oxides MgO, CaO, SrO, BaO, and Al2O3 based on ab initio wave functions. The model used to represent the local environment of a metal cation in the bulk oxide is an MO6 cluster which also includes the effect of the lattice Madelung potential. The analysis of the wave functions for these clusters leads to the conclusion that all the alkaline-earth oxides must be regarded as highly ionic oxides; however, the ionic character of the oxides decreases as one goes from MgO, almost perfectly ionic, to BaO. In Al2O3 the ionic character is further reduced; however, even in this case, the departure from the ideal, fully ionic, model of Al3+ is not exceptionally large. These conclusions are based on three measures, a decomposition of the Mq+-Oq- interaction energy, the number of electrons associated to the oxygen ions as obtained from a projection operator technique, and the analysis of the cation core-level binding energies. The increasing covalent character along the series MgO, CaO, SrO, and BaO is discussed in view of the existing theoretical models and experimental data.

Alkaline phosphatase activity as a tool for assessing nutritional conditions in the seagrass Posidonia oceanica.(L.) Delile

The effects of experimental phosphorus enrichments on alkaline phosphatase activity (APA) of the seagrass Posidonia oceanica (L.) Delile were tested. Short-term additions (as phosphate, 12 hours, in the laboratory) decreased APA by 18-2896, depending on the plant part considered (roots, young leaves or old leaves). The values of APA after this treatment were well correlated with interna1 phosphorus pools (as P concentration in plant tissues). Long-term additions (as phosphate, added to the sediment, 1 month in situ) decreased APA by 40-75%, also depending on the plant part. We conclude that alkaline phosphatase activity is a good indicator of P deficiency in this seagrass. We used this indicator to assess the P-nutritional status in a series of meadows in the NW Mediterranean, finding a high geographical variability, but correlations between APA and basic features of the meadows (carbonate content of the sediment, organic content of the sediment, shoot density, etc.) were not significant. Consequently, phosphorus deficiency does not seem to be directly related to these descriptors.

Aplicació de la termoquimiolisi - cromatografia de gasos - espectrometria de masses a l'estudi de la matèria orgànica del sòl

Estudi realitzat a partir d’una estada a la Université de Poitiers, França, entre 2007 i 2009. El treball s'ha centrat en dues activitats bàsiques. El treball realitzat s’ha centrat en dues activitats bàsiques. D’una banda, la posada a punt d'un protocol de fraccionament de la matèria orgànica del sòl, per extraccions successives amb solvents alcalins després d'una seqüència de pretractaments al sòl: cap pretractament, atac amb àcid (per destruir els carbonats), atac amb ditionit (per reduir els òxids de Fe i Al i facilitar l'extracció de la matèria orgànica associada a aquests compostos). El protocol dóna una visió de conjunt de la situació de la matèria orgànica del sòl, combinant aspectes físics (protecció, precipitació, oclusió per carbonats) i químics (grau d'humificació). D’altra banda, l'aprenentatge de la tècnica de termoquimiolisi-cromatografia de gasos-espectrometria de masses. Aquest era l'objectiu de l'estada a Poitiers, al qual hem donat prioritat. Ens hem centrat en l'estudi de fraccions físiques (densimètriques) obtingudes en estudis anteriors sobre sòls forestals. Les fraccions considerades són: fracció lleugera (FL), tres fraccions ocluïdes (OC1, OC2 i OC3) i fracció densa (FD). L’aplicació de la termoquimiolisi permet de caracteritzar diversos grups de substàncies, de les quals ens hem centrat en alguns indicadors bioquímics: àcids grasos, alcohols, diàcids, productes fenòlics i altres productes aromàtics, derivats de carbohidrats. L’estudi de conjunt d’aquests productes indica que és a les fraccions ocluïdes (que solen ser minoritàries a tots els horitzons) on la matèria orgànica d’origen microbià és dominant, mentre que a les fraccions lleugera (FL) i densa (FD) la matèria orgànica d’origen vegetal sembla dominant. Es preveu aplicar aquesta tècnica a l’estudi de les fraccions obtingudes a la primera part del treball, actualment congelades i a l’espera de ser processades.

Estudi teòric pràctic de la solubilitat de noves mescles aquoses de nitrats alcalins per climatització per absorció accionada tèrmicament a alta temperatura

Investigación realizada a partir de una estancia como profesor visitante en el Departamento de Ingeniería Mecánica de la Universitat Rovira i Virgili. Las soluciones acuosas de LiNO3 tienen una gran potencialidad para ser utilizadas como fluidos de trabajo en ciclos de absorción a altas temperaturas. La adición de otros nitratos y/o nitritos alcalinos mejora, entre otras propiedades, su solubilidad en H2O, el principal inconveniente de estas soluciones. La información bibliográfica sobre la solubilidad de estas es prácticamente inexistente, por eso, en este trabajo se ha realizado un estudio teórico-práctico de la solubilidad de algunos de estos sistemas.(...)

Marine biotoxins in the Catalan littoral: could biosensors be integrated into monitoring programmes?

Aquest article descriu els sensors enzimàtics i immunosensors electroquímics que s’han desenvolupat als nostres grups per a la detecció de la biotoxina marina àcid okadaic (OA), i discuteix la possibilitat d’integrar-los en programes de seguiment. Els sensors enzimàtics per a OA que es presenten es basen en la inhibició de la proteïna fosfatasa (PP2A) per aquesta toxina i la mesura electroquímica de l’activitat enzimàtica mitjançant l’ús de substrats enzimàtics apropiats, electroquímicament actius després de la seva desfosforació per l’enzim. Els immunosensors electroquímics descrits en aquest article es basen en un enzimoimmunoassaig sobre fase sòlida competitiu indirecte (ciELISA), amb fosfatasa alcalina (ALP) o peroxidasa (HRP) com a marcatges, i un sistema de reciclatge enzimàtic amb diaforasa (DI). Els biosensors presentats aquí s’han aplicat a l’anàlisi de dinoflagel·lats, musclos i ostres. Les validacions preliminars amb assaigs colorimètrics i LC-MS/MS han demostrat la possibilitat d’utilitzar les bioeines desenvolupades per al cribratge preliminar de biotoxines marines en mostres de camp o de cultiu, que ofereixen informació complementària a la cromatografia. En conclusió, tot i que encara cal optimitzar alguns paràmetres experimentals, la integració dels biosensors a programes de seguiment és viable i podria proporcionar avantatges respecte a altres tècniques analítiques pel que fa al temps d’anàlisi, la simplicitat, la selectivitat, la sensibilitat, el fet de poder ser d’un sol ús i l’efectivitat de cost. This article describes the electrochemical enzyme sensors and immunosensors that have been developed by our groups for the detection of marine biotoxin okadaic acid (OA), and discusses the possibility of integrating them into monitoring programmes. The enzyme sensors for OA reported herein are based on the inhibition of immobilised protein phosphatase 2A (PP2A) by this toxin and the electrochemical measurement of the enzyme activity through the use of appropriate enzyme substrates, which are electrochemically active after dephosphorylation by the enzyme. The electrochemical immunosensors described in this article are based on a competitive indirect Enzyme- Linked ImmunoSorbent Assay (ciELISA), using alkaline phosphatase (ALP) or horseradish peroxidase (HRP) as labels, and an enzymatic recycling system with diaphorase (DI). The biosensors presented herein have been applied to the analysis of dinoflagellates, mussels and oysters. Preliminary validations with colorimetric assays and LC-MS/MS have demonstrated the possibility of using the developed biotools for the preliminary screening of marine biotoxins in field or cultured samples, offering complementary information to chromatography. In conclusion, although optimisation of some experimental parameters is still required, the integration of biosensors into monitoring programmes is viable and may provide advantages over other analytical techniques in terms of analysis time, simplicity, selectivity, sensitivity, disposability of electrodes and cost effectiveness.

Ontogenetic changes in digestive enzymatic capacities of the spider crab, Maja brachydactyla (Decapoda: Majidae)

Ontogenetic changes in digestive capabilities were analyzed in larvae and first juveniles of the spider crab Maja brachydactyla. Activities of five proteinases (total proteases, trypsin, chymotrypsin, pepsin-like and aminopeptidase), three carbohydrases (amylase, maltase and chitinase), an esterase and an alkaline phosphatase were studied to evaluate digestive enzyme profiles of the species. Both quantitative (spectrophotometry and fluorometry) and qualitative (SDS-PAGE) approaches were used. All assayed enzymes were active from hatching (zoea I-ZI) throughout larval development and in first juveniles. Significant variations during ontogeny were found only in total activities likely as a consequence of digestive system development. Specific activity varied little over ontogeny, being significant only for chitinase. Total proteases, trypsin and pepsin-like activities showed a similar pattern of increase as larval ontogeny advanced, decreasing significantly in juveniles. Chymotrypsin continued to increase, showing maximum activity after metamorphosis. Proteinase zymograms confirmed strong proteolytic activity in first zoeas, with increasing bands over the course of ontogeny, decreasing after metamorphosis. A group of bands with high molecular mass was specific to larval stages. Amylase and maltase showed a parallel pattern of continuous increase of total activity as development advanced. Gel-SDS-PAGE showed unchanged patterns of amylase activity in first zoeas of different ages and the most complex set of bands during larval ontogeny in second zoea. Esterase total activity increased significantly as ZI's aged likely reflecting introduction of a lipid-enriched diet. The importance of lipid accumulation at the beginning of ontogeny was also confirmed by the protease/esterase and amylase/esterase activity ratios, which decreased from hatch to late ZI and might be explained as an adaptation, ensuring the next molt. The results suggest that larvae of M. brachydactyla are capable of digesting a variety of dietary substrates as soon as they hatch.

The implementation of liquid chromatography tandem mass spectrometry for the official control of lipophilic toxins in seafood: Single-laboratory validation under four chromatographic conditions

We performed a comprehensive study to assess the fit for purpose of four chromatographic conditions for the determination of six groups of marine lipophilic toxins (okadaic acid and dinophysistoxins, pectenotoxins, azaspiracids, yessotoxins, gymnodimine and spirolides) by LC-MS/MS to select the most suitable conditions as stated by the European Union Reference Laboratory for Marine Biotoxins (EURLMB). For every case, the elution gradient has been optimized to achieve a total run-time cycle of 12 min. We performed a single-laboratory validation for the analysis of three relevant matrices for the seafood aquaculture industry (mussels, pacific oysters and clams), and for sea urchins for which no data about lipophilic toxins have been reported before. Moreover, we have compared the method performance under alkaline conditions using two quantification strategies: the external standard calibration (EXS) and the matrix-matched standard calibration (MMS). Alkaline conditions were the only scenario that allowed detection windows with polarity switching in a 3200 QTrap mass spectrometer, thus the analysis of all toxins can be accomplished in a single run, increasing sample throughput. The limits of quantification under alkaline conditions met the validation requirements established by the EURLMB for all toxins and matrices, while the remaining conditions failed in some cases. The accuracy of the method and the matrix effects where generally dependent on the mobile phases and the seafood species. The MMS had a moderate positive impact on method accuracy for crude extracts, but it showed poor trueness for seafood species other than mussels when analyzing hydrolyzed extracts. Alkaline conditions with EXS and recovery correction for OA were selected as the most proper conditions in the context of our laboratory. This comparative study can help other laboratories to choose the best conditions for the implementation of LC-MS/MS according to their own necessities.

Metallic and nonmetallic shine in luster: An elastic ion backscattering study

Luster is a metal glass nanocomposite layer first produced in the Middle East in early Islamic times ( 9th AD) made of metal copper or silver nanoparticles embedded in a silica-based glassy matrix. These nanoparticles are produced by ion exchange between Cu+ and Ag+ and alkaline ions from the glassy matrix and further growth in a reducing atmosphere. The most striking property of luster is its capability of reflecting light like a continuous metal layer and it was unexpectedly found to be linked to one single production parameter: the presence of lead in the glassy matrix composition. The purpose of this article is to describe the characteristics and differences of the nanoparticle layers developed on lead rich and lead free glasses. Copper luster layers obtained using the ancient recipes and methods are analyzed by means of elastic ion backscattering spectroscopy associated with other analytical techniques. The depth profile of the different elements is determined, showing that the luster layer formed in lead rich glasses is 5–6 times thinner and 3–4 times Cu richer. Therefore, the metal nanoparticles are more densely packed in the layer and this fact is related to its higher reflectivity. It is shown that lead influences the structure of the metal nanoparticle layer through the change of the precipitation kinetics

Estabilitat i diagènesis dels fitòlits de silici en els jaciments arqueològics

Estudi realitzat a partir d’una estada al Kimmel Center for Archaeological Research, Israel, entre 2010 i 2012. Els fitòlits són un dels components principals dels sediments arqueològics. Són relativament estables i menys propensos a la degradació biològica que altres restes vegetals, però també poden ser afectats per la diagènesis. Per entendre com la diagènesis afecta als fitòlits hem desenvolupat una aproximació experimental utilitzant solucions alcalines per determinar l’estabilitat individual de fitòlits fòssils i moderns. L’experimentació ha estat completada amb un estudi de camp a Izbet Sartah. Els resultats mostren com la diagènesis canvia la composició dels conjunts de fitòlits, i per tant afecta la interpretació arqueològica. Conseqüentment, hem desenvolupat un mètode per determinar l’estat de preservació dels fitòlits en els jaciments arqueològics. L’experimentació mostra com els fitòlits moderns són més solubles que els fitòlits fòssils. Tant els fitòlits fòssils com els moderns són menys estables si són cremats. No totes les morfologies es preserven igual, indicant així que hi ha unes morfologies més estables que unes altres. Els fitòlits amb decoracions delicades, especialment aquells formats a la inflorescència de gramínies, són més propensos a la dissolució que els de les fulles. L’avaluació de l’estat de preservació dels fitòlits en jaciments arqueològics es pot realitzar utilitzant un conjunt de tècniques com ara: l’Index de Variació de Fitòlits, el mètode de dissolució ràpida, la identificació de morfologies delicades i la utilització del FTIR. Proposem que la diagènesis dels fitòlits depèn directament de la quantitat inicial de fitòlits en els sediments, la velocitat de sedimentació, i la presència o absència de fitòlits i plantes modernes en l’àrea estudiada. Els resultats d’aquesta investigació han estat publicats en dos articles afegits al final de l’informe (Cabanes et al., 2011 i Cabanes et al., in press), presentats en congressos internacionals i utilitzats indirectament en altres investigacions.