Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders

The Determinants of Entry are not Independent of Start-up Size: Some evidence from Spanish manufacturing

In this paper we explore the determinants of firm start-up size of Spanish manufacturing industries. The industries' barriers to entry affect the ability of potential entrants to enter the markets and the size range at which they decide to enter. In order to examine the relationships between barriers to entry and size we applied the quantile regression techniques. Our results indicate that the variables that characterize the structure of the market, the variables that are related to the behaviour of the incumbent firms and the rate of growth of the industries generate different barriers depending on the initial size of the entrants. Keywords: Entry, regression quantiles, start-up size. JEL classification: L110, L600

Who participates in R&D subsidy programs? The case of spanish manufacturing firms.

Empirical evidence on the effectiveness of R&D subsidies to firms has produced mixed results so far. One possible explanation is that firms and project selection rules may be quite heterogeneous both across agencies and across industries, leading to different outcomes in terms of the induced additional private effort. Here we focus on the participation stage. Using a sample of Spanish firms, we test for differences across agencies and industries. Our results suggest that firms in the same industry face different hurdles to participate in different agencies’ programs, that participation patterns may reflect a combination of agency goals, and that patterns differ across high-tech and low-tech industries.

New business formation and employment growth: some evidence for the Spanish manufacturing industry

This paper explores the effects of new business formation on employment growth in Spanish manufacturing industries. New firms are believed to make an important contribution to economic growth but the extent of this contribution is unclear. We consider time lags of new firm formation as explanatory variables of employment change and identify how long the effect of new firm entries on employment lasts. Our main results show that the effects of new business formation are positive in the short term, negative in the medium term and positive in the long term, thus confirming the existence of indirect supply-side effects found in similar studies for other countries. Key words: regional growth, firm entry, time lags and Spanish economy. JEL classifications: L00, L60, R11, R12

Technical innovations at the service of cheaper labour in pre-industrial Europe. The Enlightened agenda to transform the gender division of labour in silk manufacturing

In 1749, Jacques de Vaucanson patented his or tour pour tirer la soie or spindle for silk reeling. In that same year he presented his invention to the Academy of the Sciences in Paris, of which he was a member1. Jacques de Vaucanson was born in Grenoble, France, in 1709, and died in Paris in 1782. In 1741 he had been appointed inspector of silk manufactures by Louis XV. He set about reorganizing the silk industry in France, in considerable difficulty at the time due to foreign competition. Given Vaucanson’s position, his invention was intended to replace the traditional Piémontes method, and had an immediate impact upon the silk industry in France and all over Europe.

Agglomeration and location: a nonparametric approach

The aim of this article is to assess the effects of several territorial characteristics, specifically agglomeration economies, on industrial location processes in the Spanish region of Catalonia. Theoretically, the level of agglomeration causes economies which favour the location of new establishments, but an excessive level of agglomeration might cause diseconomies, since congestion effects arise. The empirical evidence on this matter is inconclusive, probably because the models used so far are not suitable enough. We use a more flexible semiparametric specification, which allows us to study the nonlinear relationship between the different types of agglomeration levels and location processes. Our main statistical source is the REIC (Catalan Manufacturing Establishments Register), which has plant-level microdata on location of new industrial establishments. Keywords: agglomeration economies, industrial location, Generalized Additive Models, nonparametric estimation, count data models.

Productivity growth and competition in Spanish manufacturing firms: What has happened in recent years?

This paper addresses the issue of the relationship between productivity and market competition. In comparison to the economies of other European countries, the Spanish economy has been growing, while productivity growth has stagnated. Here we provide empirical evidence about the relationship between productivity and market competition from Spanish manufacturing firms at firm level between 1994 and 2004. Correcting for selection bias, our study pays special attention to the patterns of productivity growth between openness and non-openness firms. When market competition increases the effect on firms operating in domestic markets is positive but when the level of competition is high incentives to invest in innovation and productivity gains disappear. The empirical relationship between competition and productivity is an inverted U-shape, where productivity growth is highest at intermediate levels of competition. The productivity growth of firms operating in international markets is higher than that of non-openness firms, but when market competition rises they moderate their productivity growth. Our empirical results suggest that the correct competition policy in the Spanish economy should remove the barriers to competition in internal markets in order to increase the incentives for manufacturing firms to invest in innovation and productivity growth.

Mechanisms of agglomeration: Evidence from the location of new manufacturing firms in Spain

El objetivo de esta investigación es aportar evidencia sobre las fuentes de las economías de aglomeración para el caso español. De todas las maneras posibles que se han tomado en la literatura para medir las economías de aglomeración, nosotros lo analizamos a partir de las decisiones de localización de las empresas manufactureras. La literatura reciente ha puesto de relieve que el análisis basado en la disyuntiva localización / urbanización (relaciones dentro de un mismo sector) no es suficiente para entender las economías de aglomeración. Sin embargo, las relaciones entre los diferentes sectores sí resultan significativas al examinar por qué las empresas que pertenecen a diferentes sectores se localizan unas al lado de las otras. Con esto en mente, intentamos explicar que relaciones entre diferentes sectores pueden explicar coaglomeración. Para ello, nos centramos en aquellas relaciones entre sectores definidos a partir de los mecanismos de aglomeración de Marshall, es decir, labor market, input sharing y knowledge spillovers. Trabajamos con el labor market pooling en la medida en que los dos sectores utilizan los mismos trabajadores (clasificación de ocupaciones). Con el segundo mecanismo de Marshall, input sharing, introducimos cómo dos sectores tienen una relación de comprador / vendedor. Por último, nos referimos a dos sectores que utilizan las mismas tecnologías en cuanto a los knowledge spillovers. Con el fin de capturar todos los efectos de los mecanismos de aglomeracion en España, en esta investigación trabajamos con dos ámbitos geográficos, los municipios y los mercados de trabajo locales. La literatura existente nunca se ha puesto de acuerdo en cual es el ámbito geográfico en el que mejor trabajan los mecanismos Marshall, por lo que hemos cubierto todas las unidades geográficas potenciales.

An approximate solution method for boundary layer flow of a power law fluid over a flat plate

The work in this paper deals with the development of momentum and thermal boundary layers when a power law fluid flows over a flat plate. At the plate we impose either constant temperature, constant flux or a Newton cooling condition. The problem is analysed using similarity solutions, integral momentum and energy equations and an approximation technique which is a form of the Heat Balance Integral Method. The fluid properties are assumed to be independent of temperature, hence the momentum equation uncouples from the thermal problem. We first derive the similarity equations for the velocity and present exact solutions for the case where the power law index n = 2. The similarity solutions are used to validate the new approximation method. This new technique is then applied to the thermal boundary layer, where a similarity solution can only be obtained for the case n = 1.

An investigation on the pay-off to generic competences for core employees in Catalan manufacturing firms

The aim of this paper is to measure the returns to human capital. We use a unique data set consisting of matched employer-employee information. Data on individuals' human capital include a set of 26 competences that capture the utilization of workers' skills in a very detailed way. Thus, we can expand the concept of human capital and discuss the type of skills that are more productive in the workplace and, hence, generate a higher payoff for the workers. The rich information on firm's and workplace characteristics allows us to introduce a broad range of controls and to improve previous research in this field. This paper gives evidence that the returns to generic competences differ depending on the position of the worker in the firm. Only numeracy skills are reward independent of the occupational status of the worker. The level of technology used by the firm in the production process does not directly increase workers’ pay, but it influences the pay-off to some of the competences. JEL Classification: J24, J31

Obtenció de capes primes d'alúmina mitjançant "Atomic Layer Deposition"

En aquest projecte s'ha estudiat la posada a punt d’un equip comercial ALD per a l’obtenció de capes primes d'alúmina a escala nanomètrica utilitzant vapor d’aigua i TMA com a precursors. Per tal de comprovar a bondat de les receptes experimentals aportades pel fabricant així com comprovar alguns aspectes de la teoria ALD s’han realitzat una sèrie de mostres variant els diferents paràmetres experimentals, principalment la temperatura de deposició, el nombre de cicles, la durada del cicle i el tipus de substrat. Per a la determinació dels gruixos nanomètrics de les capes i per tant dels ritmes de creixement s’ha utilitzat la el·lipsometria, una de les poques tècniques no destructives capaç de mesurar amb gran precisió gruixos de capes o interfases de pocs àngstroms o nanòmetres. En una primera etapa s'han utilitzat els valors experimentals donats pel fabricant del sistema ALD per determinar el ritme de creixement en funció de la temperatura de dipòsit i del numero de cicles, en ambdós casos sobre diversos substrats. S'ha demostrat que el ritme de creixement augmenta lleugerament en augmentar la temperatura de dipòsit, tot i que amb una variació petita, de l'ordre del 12% en variar 70ºC la temperatura de deposició. Així mateix s'ha demostrat la linealitat del gruix amb el número de cicles, tot i que no s’observa una proporcionalitat exacta. En una segona etapa s'han optimitzat els paràmetres experimentals, bàsicament els temps de purga entre pols i pols per tal de reduir considerablement les durades dels experiments realitzats a relativament baixes temperatures. En aquest cas s’ha comprovat que es mantenien els ritmes de creixement amb una diferencia del 3,6%, 4,8% i 5,5% en optimitzar el cicles en 6,65h, 8,31h, o 8,33h, respectivament. A més, per una d'aquestes condicions s’ha demostrat que es mantenia l’alta conformitat de les capes d’alúmina. A més, s'ha realitzat un estudi de l'homogeneïtat del gruix de les capes en tota la zona de dipòsit del reactor ALD. S’ha demostrat que la variació en gruix de les capes dipositades a 120ºC és com a màxim del 6,2% en una superfície de 110 cm2. Confirmant l’excepcional control de gruixos de la tècnica ALD.

Partial disjoint path for multi-layer protection in GMPLS networks

In this paper, different recovery methods applied at different network layers and time scales are used in order to enhance the network reliability. Each layer deploys its own fault management methods. However, current recovery methods are applied to only a specific layer. New protection schemes, based on the proposed partial disjoint path algorithm, are defined in order to avoid protection duplications in a multi-layer scenario. The new protection schemes also encompass shared segment backup computation and shared risk link group identification. A complete set of experiments proves the efficiency of the proposed methods in relation with previous ones, in terms of resources used to protect the network, the failure recovery time and the request rejection ratio

Enhanced multi-layer protection in multi-service GMPLS networks

This paper focuses on QoS routing with protection in an MPLS network over an optical layer. In this multi-layer scenario each layer deploys its own fault management methods. A partially protected optical layer is proposed and the rest of the network is protected at the MPLS layer. New protection schemes that avoid protection duplications are proposed. Moreover, this paper also introduces a new traffic classification based on the level of reliability. The failure impact is evaluated in terms of recovery time depending on the traffic class. The proposed schemes also include a novel variation of minimum interference routing and shared segment backup computation. A complete set of experiments proves that the proposed schemes are more efficient as compared to the previous ones, in terms of resources used to protect the network, failure impact and the request rejection ratio

Estudi i implantació del sistema Lean Manufacturing a una empresa convencional del sector de l'automòbil, per incrementar la competitivitat

El projecte es planteja la implantació de la metodologia LEAN en una de les plantes de producció d’una empresa del sector de la indústria de l’automòbil per aconseguir millorar la seva competitivitat. El projecte engloba l’anàlisi de les cadenes de valor de quatre dels productes més significatius que es fabriquen actualment a la planta, mitjançant la metodologia Value Stream Map (VSM), així com el desenvolupament de noves propostes per la millora de cadascuna de les cadenes

Exploring Cross-layer power management for PGAS applications on the SCC platform

Technological limitations and power constraints are resulting in high-performance parallel computing architectures that are based on large numbers of high-core-count processors. Commercially available processors are now at 8 and 16 cores and experimental platforms, such as the many-core Intel Single-chip Cloud Computer (SCC) platform, provide much higher core counts. These trends are presenting new sets of challenges to HPC applications including programming complexity and the need for extreme energy efficiency.In this work, we first investigate the power behavior of scientific PGAS application kernels on the SCC platform, and explore opportunities and challenges for power management within the PGAS framework. Results obtained via empirical evaluation of Unified Parallel C (UPC) applications on the SCC platform under different constraints, show that, for specific operations, the potential for energy savings in PGAS is large; and power/performance trade-offs can be effectively managed using a cross-layerapproach. We investigate cross-layer power management using PGAS language extensions and runtime mechanisms that manipulate power/performance tradeoffs. Specifically, we present the design, implementation and evaluation of such a middleware for application-aware cross-layer power management of UPC applications on the SCC platform. Finally, based on our observations, we provide a set of recommendations and insights that can be used to support similar power management for PGAS applications on other many-core platforms.