Behavior study of pipes after forming, coating and bending

A study of the main types of coatings and its processes that modern industry commonly apply to prevent to the corrosion due to the environmental effects to energetic market pipelines have been done. Extracting main time and temperature range values, coating heat treatment recreation have been applied to x65 pipelines steel grade samples obtained from a pipe which was formed using UOE forming process. Experimental tensile tests and Charpy V‐Notch Impact test have been carried out for a deeply knowledge of the influence on the steel once this recreations are applied. The Yield Strength and toughness have been improved despite lower values in rupture strain and ductile‐brittle temperature transition have been obtained. Finite Element Method have been applied to simulate the entirely pipe cold bending process to predict the mechanical properties and behaviour of the pipe made from x65 steel grade under different conditions.

Tensile strength characteristics of polypropylene composites reinforced with stone groundwood fibers from softwood

The behavior of stone groundwood / polypropylene injection-molded composites was evaluated with and without coupling agent. Stone groundwood (SGW) is a fibrous material commonly prepared in a high yield process and mainly used for papermaking applications. In this work, the use of SGW fibers was explored as a reinforcing element of polypropylene (PP) composites. The surface charge density of the composite components was evaluated, as well as the fiber’s length and diameter inside the composite material. Two mixing extrusion processes were evaluated, and the use of a kinetic mixer, instead of an internal mixer, resulted in longer mean fiber lengths of the reinforcing fibers. On the other hand, the accessibility of surface hydroxyl groups of stone groundwood fibers was improved by treating the fibers with 5% of sodium hydroxide, resulting in a noticeable increase of the tensile strength of the composites, for a similar percentage of coupling agent. A new parameter called Fiber Tensile Strength Factor is defined and used as a baseline for the comparison of the properties of the different composite materials. Finally the competitiveness of stone groundwood / polypropylene / polypropylene-co-maleic anhydride system, which compared favorably to sized glass-fiber / polypropylene GF/PP and glass-fiber / polypropylene / polypropylene-co-maleic anhydride composite formulations, was quantified by means of the fiber tensile strength factor

Carbon and nitrogen partitioning during post-anthesis is conditioned by N fertilization and sink strength in three cereals

Further knowledge of the processes conditioning nitrogen use efficiency (NUE) is of great relevance to crop productivity. The aim of this paper was characterise C and N partitioning during grain filling and their implications for NUE. Cereals such as bread wheat (Triticum aestivum L. cv Califa sur), triticale (× Triticosecale Wittmack cv. Imperioso) and tritordeum (× Tritordeum Asch. & Graebn line HT 621) were grown under low (LN, 5 mm NH4NO3) and high (HN, 15 mm NH4NO3) N conditions. We conducted simultaneous double labelling (12CO2 and 15NH415NO3) in order to characterise C and N partitioning during grain filling. Although triticale plants showed the largest total and ear dry matter values in HN conditions, the large investment in shoot and root biomass negatively affected ear NUE. Tritordeum was the only genotype that increased NUE in both N treatments (NUEtotal), whereas in wheat, no significant effect was detected. N labelling revealed that N fertilisation during post-anthesis was more relevant for wheat and tritordeum grain filling than for triticale. The study also revealed that the investments of C and N in flag leaves and shoots, together with the"waste" of photoassimilates in respiration, conditioned the NUE of plants, and especially under LN. These results suggest that C and N use by these plants needs to be improved in order to increase ear C and N sinks, especially under LN. It is also remarkable that even though tritordeum shows the largest increase in NUE, the low yield of this cereal limits its agronomic value.

Shading effects on the yield of an Argentinian wheat cultivar

Shading treatments of 50% of the incident radiation were applied to the semidwarf wheat cultivar Leones INTA before and after anthesis in two field experiments in Argentina in 1987 and 1988. The treatments reduced biological (above-ground dry matter) yield, grain yield and number of grains/m2. Number of grains/m2 was closely and linearly correlated with ear dry weight at anthesis and with the photothermal quotient, calculated from 20 days before to 10 days after anthesis. Grain yield was sink limited, and the shading treatments reduced sink strength. The contribution of preanthesis assimilates to grain yield was smaller in the shaded crops than in the unshaded controls; in unshaded crops, almost 40% of grain yield was contributed by preanthesis assimilates whilst in preanthesis shaded crops this contribution was negligible. The proportion of preanthesis assimilates contributed to the grain was closely related to the decrease in stem dry weight during grain filling. The effects of shading on main stems and tillers were the same.

Sink limitations to yield in wheat : how could it be reduced?

Further genetic gains in wheat yield are required to match expected increases in demand. This may require the identification of physiological attributes able to produce such improvement, as well as the genetic bases controlling those traits in order to facilitate their manipulation. In the present paper, a theoretical framework of source and sink limitation to wheat yield is presented and the fine-tuning of crop development as an alternative for increasing yield potential is discussed. Following a top-down approach, most crop physiologists have agreed that the main attribute explaining past genetic gains in yield was harvest index (HI). By virtue of previous success, no further gains may be expected in HI and an alternative must be found. Using a bottom-up approach, the present paper firstly provides evidence on the generalized sink-limited condition of grain growth, determining that for further increases in yield potential, sink strength during grain filling has to be increased. The focus should be on further increasing grain number per m2, through fine-tuning pre-anthesis developmental patterns. The phase of rapid spike growth period (RSGP) is critical for grain number determination and increasing spike growth during pre-anthesis would result in an increased number of grains. This might be achieved by lengthening the duration of the phase (though without altering flowering time), as there is genotypic variation in the proportion of pre-anthesis time elapsed either before or after the onset of the stem elongation phase. Photoperiod sensitivity during RSGP could be then used as a genetic tool to further increase grain number, since slower development results in smoother floret development and more floret primordia achieve the fertile floret stage, able to produce a grain. Far less progress has been achieved on the genetic control of this attribute. None of the well-known major Ppd alleles seems to be consistently responsible for RSGP sensitivity. Alternatives for identifying the genetic factors responsible for this sensitivity (e.g. quantitative trait locus (QTL) identification in mapping populations) are being considered.

Not all university degrees yield the same return: private and social returns to higher education for males in Spain

In this paper we use micro data from the Spanish Family Expenditure Survey for 1990 to estimate, for the first time, the private and social rates of return of different university degrees in Spain. We compute internal rates of return and include investment on higher education financed by the public purse to estimate social rates of return. Our main finding is that, as presumed, there is large heterogeneity in rates of return amongst different university

Leading indicator properties of US high-yield credit spreads

In this paper we examine the out-of-sample forecast performance of high-yield credit spreads regarding real-time and revised data on employment and industrial production in the US. We evaluate models using both a point forecast and a probability forecast exercise. Our main findings suggest the use of few factors obtained by pooling information from a number of sector-specific high-yield credit spreads. This can be justified by observing that, especially for employment, there is a gain from using a principal components model fitted to high-yield credit spreads compared to the prediction produced by benchmarks, such as an AR, and ARDL models that use either the term spread or the aggregate high-yield spread as exogenous regressor. Moreover, forecasts based on real-time data are generally comparable to forecasts based on revised data. JEL Classification: C22; C53; E32 Keywords: Credit spreads; Principal components; Forecasting; Real-time data.

Tritordeum, wheat and triticale yield components under multi-local mediterranean drought conditions

The species x location interaction was of great importance in explaining the behaviour of genetic material. The study presented here shows, for the first time, the performance, under field conditions of the new tritordeum species, compared to wheat and triticale in a wide range of Mediterranean countries (Spain, Lebanon and Tunisia). The results obtained revealed that despite the diversity of environmental conditions, the main differences in yield were due to genotypes, especially to differences between species. The multi-local study with different growth conditions revealed important information about the water availability effect on yield. In the lowest yielding environments (Tunisia rainfed), Tritordeum and triticale yields were equivalent. However under better growth conditions (Spain), tritordeum yield was shown to be lower than wheat and triticale. Interestingly, when water limitation was extended during the pre-anthesis period, differences in tritordeum versus wheat-triticale yield rate were larger than when water stress occurred during anthesis. These variations were explained by the fact that kernel weight has been found as the limiting factor for yield determination in tritordeum, and a delay in the anthesis date may have been the cause for the low kernel weight and low yield under Mediterranean drought conditions. Such differences in yield between tritordeum and wheat or triticale could be explained by the fact that tritordeum is a relatively new species and far fewer resources have been devoted to its improvement when compared to wheat and triticale. Our results suggest that breeding efforts should be directed to an earlier anthesis date and a longer grain filling period. tritordeum proved to have possibilities to be grown under drought environments as a new crop, since its performance was quite close to wheat and triticale. Besides, it has qualitative added values that may improve farmers' income per unit land.

Mean intrinsic tensile properties of stone groundwood fibers from softwood

Stone groundwood (SGW) is a fibrous matter commonly prepared in a high yield process, and mainly used for papermaking applications. In this work, the use of SGW fibers is explored as reinforcing element of polypropylene (PP) composites. Due to its chemical and superficial features, the use of coupling agents is needed for a good adhesion and stress transfer across the fiber-matrix interface. The intrinsic strength of the reinforcement is a key parameter to predict the mechanical properties of the composite and to perform an interface analysis. The main objective of the present work was the determination of the intrinsic tensile strength of stone groundwood fibers. Coupled and non-coupled PP composites from stone groundwood fibers were prepared. The influence of the surface morphology and the quality at interface on the final properties of the composite was analyzed and compared to that of fiberglass PP composites. The intrinsic tensile properties of stone groundwood fibers, as well as the fiber orientation factor and the interfacial shear strength of the current composites were determined

Density functional energy decomposition into one- and two-atom contributions

The present work provides a generalization of Mayer's energy decomposition for the density-functional theory (DFT) case. It is shown that one- and two-atom Hartree-Fock energy components in Mayer's approach can be represented as an action of a one-atom potential VA on a one-atom density ρ A or ρ B. To treat the exchange-correlation term in the DFT energy expression in a similar way, the exchange-correlation energy density per electron is expanded into a linear combination of basis functions. Calculations carried out for a number of density functionals demonstrate that the DFT and Hartree-Fock two-atom energies agree to a reasonable extent with each other. The two-atom energies for strong covalent bonds are within the range of typical bond dissociation energies and are therefore a convenient computational tool for assessment of individual bond strength in polyatomic molecules. For nonspecific nonbonding interactions, the two-atom energies are low. They can be either repulsive or slightly attractive, but the DFT results more frequently yield small attractive values compared to the Hartree-Fock case. The hydrogen bond in the water dimer is calculated to be between the strong covalent and nonbonding interactions on the energy scale

Speculation, risk premia and expectations in the yield curve

An affine asset pricing model in which traders have rational but heterogeneous expectations aboutfuture asset prices is developed. We use the framework to analyze the term structure of interestrates and to perform a novel three-way decomposition of bond yields into (i) average expectationsabout short rates (ii) common risk premia and (iii) a speculative component due to heterogeneousexpectations about the resale value of a bond. The speculative term is orthogonal to public informationin real time and therefore statistically distinct from common risk premia. Empirically wefind that the speculative component is quantitatively important accounting for up to a percentagepoint of yields, even in the low yield environment of the last decade. Furthermore, allowing for aspeculative component in bond yields results in estimates of historical risk premia that are morevolatile than suggested by standard Affine Gaussian term structure models which our frameworknests.

The Impact of Monetary Union on EU-15 Sovereign Debt Yield Spreads

With European Monetary Union (EMU), there was an increase in the adjusted spreads (corrected from the foreign exchange risk) of euro participating countries' sovereign securities over Germany and a decrease in those of non-euro countries. The objective of this paper is to study the reasons for this result, and in particular, whether the change in the price assigned by markets was due to domestic factors such as credit risk and/or market liquidity, or to international risk factors. The empirical evidence suggests that market size scale economies have increased since EMU for all European markets, so the effect of the various risk factors, even though it differs between euro and non-euro countries, is always dependent on the size of the market.

Influence of the driving mechanism on the response of systems with athermal dynamics: The example of the random-field Ising model

We investigate the influence of the driving mechanism on the hysteretic response of systems with athermal dynamics. In the framework of local mean-field theory at finite temperature (but neglecting thermally activated processes), we compare the rate-independent hysteresis loops obtained in the random field Ising model when controlling either the external magnetic field H or the extensive magnetization M. Two distinct behaviors are observed, depending on disorder strength. At large disorder, the H-driven and M-driven protocols yield identical hysteresis loops in the thermodynamic limit. At low disorder, when the H-driven magnetization curve is discontinuous (due to the presence of a macroscopic avalanche), the M-driven loop is reentrant while the induced field exhibits strong intermittent fluctuations and is only weakly self-averaging. The relevance of these results to the experimental observations in ferromagnetic materials, shape memory alloys, and other disordered systems is discussed.

Distribution of single-particle strength due to short-range and tensor correlations

The distribution of single-particle strength in nuclear matter is calculated for a realistic nucleon-nucleon interaction. The influence of the short-range repulsion and the tensor component of the nuclear force on the spectral functions is to move approximately 13% of the total strength for all single-particle states beyond 100 MeV into the particle domain. This result is related to the abundantly observed quenching phenomena in nuclei which include the reduction of spectroscopic factors observed in (e,ep) reactions and the missing strength in low energy response functions.

Influence of disorder strength on phase-field models of interfacial growth

We study the influence of disorder strength on the interface roughening process in a phase-field model with locally conserved dynamics. We consider two cases where the mobility coefficient multiplying the locally conserved current is either constant throughout the system (the two-sided model) or becomes zero in the phase into which the interface advances (one-sided model). In the limit of weak disorder, both models are completely equivalent and can reproduce the physical process of a fluid diffusively invading a porous media, where super-rough scaling of the interface fluctuations occurs. On the other hand, increasing disorder causes the scaling properties to change to intrinsic anomalous scaling. In the limit of strong disorder this behavior prevails for the one-sided model, whereas for the two-sided case, nucleation of domains in front of the invading front are observed.