Sink limitations to yield in wheat : how could it be reduced?

Further genetic gains in wheat yield are required to match expected increases in demand. This may require the identification of physiological attributes able to produce such improvement, as well as the genetic bases controlling those traits in order to facilitate their manipulation. In the present paper, a theoretical framework of source and sink limitation to wheat yield is presented and the fine-tuning of crop development as an alternative for increasing yield potential is discussed. Following a top-down approach, most crop physiologists have agreed that the main attribute explaining past genetic gains in yield was harvest index (HI). By virtue of previous success, no further gains may be expected in HI and an alternative must be found. Using a bottom-up approach, the present paper firstly provides evidence on the generalized sink-limited condition of grain growth, determining that for further increases in yield potential, sink strength during grain filling has to be increased. The focus should be on further increasing grain number per m2, through fine-tuning pre-anthesis developmental patterns. The phase of rapid spike growth period (RSGP) is critical for grain number determination and increasing spike growth during pre-anthesis would result in an increased number of grains. This might be achieved by lengthening the duration of the phase (though without altering flowering time), as there is genotypic variation in the proportion of pre-anthesis time elapsed either before or after the onset of the stem elongation phase. Photoperiod sensitivity during RSGP could be then used as a genetic tool to further increase grain number, since slower development results in smoother floret development and more floret primordia achieve the fertile floret stage, able to produce a grain. Far less progress has been achieved on the genetic control of this attribute. None of the well-known major Ppd alleles seems to be consistently responsible for RSGP sensitivity. Alternatives for identifying the genetic factors responsible for this sensitivity (e.g. quantitative trait locus (QTL) identification in mapping populations) are being considered.

Prospects of doubling global wheat yields

While an adequate supply of food can be achieved at present for the current global population, sustaining this into the future will be difficult in the face of a steadily increasing population, increased wealth and a diminishing availability of fertile land and water for agriculture. This problem will be compounded by the new uses of agricultural products, for example, as biofuels. Wheat alone provides ≥20% of the calories and the protein for the world's population, and the value and need to increase the production is recognized widely. Currently, the world average wheat yield is around 3 t/ha but there is considerable variation between countries, with region-specific factors limiting yield, each requiring individual solutions. Delivering increased yields in any situation is a complex challenge that is unlikely to be solved by single approaches and a multidisciplinary integrated approach to crop improvement is required. There are three specific major challenges: increasing yield potential, protecting yield potential, and increasing resource use efficiency to ensure sustainability. Since the green revolution, yields at the farm gate have stagnated in many countries, or are increasing at less than half the rate required to meet the projected demand. In some countries, large gains can still be achieved by improvements in agronomy, but in many others the yield gains will only be achieved by further genetic improvement. In this overview, the problems and potential solutions for increased wheat yields are discussed, in the context of specific geographic regions, with a particular emphasis on China. The importance and the prospects for improvement of individual traits are presented. It is concluded that there are opportunities for yield increase but a major challenge will be avoiding a simultaneous increase in resource requirements.

Catalytic gasification of glycerol in supercritical water

The conversion of glycerol in supercritical water (SCW) was studied at 510-550 °C and a pressure of 350 bars using both a bed of inert and non-porous ZrO2 particles (hydrothermal experiments), and a bed of a 1% Ru/ZrO2 catalyst. Experiments were conducted with a glycerol concentration of 5 wt% in a continuous isothermal fixed-bed reactor at a residence time between 2 and 10 s. Hydrothermolysis of glycerol formed water-soluble products such as acetaldehyde, acetic acid, hydroxyacetone and acrolein, and gases like H2, CO and CO2. The catalyst enhanced the formation of acetic acid, inhibited the formation of acrolein, and promoted gasification of the glycerol decomposition products. Hydrogen and carbon oxides were the main gases produced in the catalytic experiments, with minor amounts of methane and ethylene. Complete glycerol conversion was achieved at a residence time of 8.5 s at 510 °C, and at around 5 s at 550 °C with the 1 wt% Ru/ZrO2 catalyst. The catalyst was not active enough to achieve complete gasification since high yields of primary products like acetic acid and acetaldehyde were still present. Carbon balances were between 80 and 60% in the catalytic experiments, decreasing continuously as the residence time was increased. This was attributed partially to the formation of methanol and acetaldehyde, which were not recovered and analyzed efficiently in our set-up, but also to the formation of carbon deposits. Carbon deposition was not observed on the catalyst particles but on the surface of the inert zirconia particles, especially at high residence time. This was related to the higher concentration of acetic acid and other acidic species in the catalytic experiments, which may polymerize to form tar-like carbon precursors. Because of carbon deposition, hydrogen yields were significantly lower than expected; for instance at 550 °C the hydrogen yield potential was only 50% of the stoichiometric value.

An update on EMU sovereign yield spread drivers in times of crisis: A panel data analysis

We empirically investigate the determinants of EMU sovereign bond yield spreads with respect to the German bund. Using panel data techniques, we examine the role of a wide set of potential drivers. To our knowledge, this paper presents one of the most exhaustive compilations of the variables used in the literature to study the behaviour of sovereign yield spreads and, in particular, to gauge the effect on these spreads of changes in market sentiment and risk aversion. We use a sample of both central and peripheral countries from January 1999 to December 2012 and assess whether there were significant changes after the outbreak of the euro area debt crisis. Our results suggest that the rise in sovereign risk in central countries can only be partially explained by the evolution of local macroeconomic variables in those countries.

An update on EMU sovereign yield spread drivers in times of crisis: A panel data analysis

We empirically investigate the determinants of EMU sovereign bond yield spreads with respect to the German bund. Using panel data techniques, we examine the role of a wide set of potential drivers. To our knowledge, this paper presents one of the most exhaustive compilations of the variables used in the literature to study the behaviour of sovereign yield spreads and, in particular, to gauge the effect on these spreads of changes in market sentiment and risk aversion. We use a sample of both central and peripheral countries from January 1999 to December 2012 and assess whether there were significant changes after the outbreak of the euro area debt crisis. Our results suggest that the rise in sovereign risk in central countries can only be partially explained by the evolution of local macroeconomic variables in those countries.

Comparative performance of the stable isotope signatures of carbon, nitrogen and oxygen in assessing early vigour and grain yield in durum wheat

The present paper studied the performance of the stable isotope signatures of carbon (δ13C), nitrogen (δ15N) and oxygen (δ18O) in plants when used to assess early vigour and grain yield (GY) in durum wheat growing under mild and moderate Mediterranean stress conditions. A collection of 114 recombinant inbred lines was grown under rainfed (RF) and supplementary irrigation (IR) conditions. Broad sense heritabilities (H2) for GY and harvest index (HI) were higher under RF conditions than under IR. Broad sense heritabilities for δ13C were always above 0·60, regardless of the plant part studied, with similar values for IR and RF trials. Some of the largest genetic correlations with GY were those shown by the δ13C content of the flag leaf blade and mature grains. Under both water treatments, mature grains showed the highest negative correlations between δ13C and GY across genotypes. Flag leaf δ13C was negatively correlated with GY only under RF conditions. The δ13C in seedlings was negatively correlated, under IR conditions only, with GY but also with early vigour. The sources of variation in early vigour were studied by stepwise analysis using the stable isotope signatures measured in seedlings. The δ13C was able to explain almost 0·20 of this variation under RF, but up to 0·30 under IR. In addition, nitrogen concentration in seedlings accounted for another 0·05 of variation, increasing the amount explained to 0·35. The sources of variation in GY were also studied through stable isotope signatures and biomass of different plant parts: δ13C was always the first parameter to appear in the models for both water conditions, explaining c. 0·20 of the variation. The second parameter (δ15N or N concentration of grain, or biomass at maturity) depended on the water conditions and the plant tissue being analysed. Oxygen isotope composition (δ18O) was only able to explain a small amount of the variation in GY. In this regard, despite the known and previously described value of δ13C as a tool in breeding, δ15N is confirmed as an additional tool in the present study. Oxygen isotope composition does not seem to offer any potential, at least under the conditions of the present study.

Not all university degrees yield the same return: private and social returns to higher education for males in Spain

In this paper we use micro data from the Spanish Family Expenditure Survey for 1990 to estimate, for the first time, the private and social rates of return of different university degrees in Spain. We compute internal rates of return and include investment on higher education financed by the public purse to estimate social rates of return. Our main finding is that, as presumed, there is large heterogeneity in rates of return amongst different university

Entry and market selection of firms: a laboratory study

We study competition in experimental markets in which two incumbents face entry by three other firms. Our treatments vary with respect to three factors: sequential vs. block or simultaneous entry, the cost functions of entrants and the amount of time during which incumbents are protected from entry. Before entry incumbents are able to collude in all cases. When all firms' costs are the same entry always leads consumer surplus and profits to their equilibrium levels. When entrants are more efficient than incumbents, entry leads consumer surplus to equilibrium. However, total profits remain below equilibrium, due to the fact that the inefficient incumbents produce too much and efficient entrants produce too little. Market behavior is satisfactory from the consumers' standpoint, but does not yield adequate signals to other potential entrants. These results are not affected by whether entry is simultaneous or sequential. The length of the incumbency phase does have some subtle effects.

The Experience of European Integration and the Potential for Integration in South America

The experience of the European Union is the most significant and far-reaching among all attempts at regional integration. It is, therefore, the most likely to provide some lessons for those world regions that are just beginning this complex process. In turn, the Common Market of the South (MERCOSUR) and the Andean Community (CAN) are among the regional integration projects that have reached the greatest level of formal accomplishment after the EU. MERCOSUR is a customs union that aspires to become a common market, while avowing the commitment to advance towards political integration. For its part, CAN is a customs union that has already developed supranational institutions such as a Commission, a Parliament and a Court of Justice. In both cases, however, words have progressively tended to wander far from deeds. One reason underlying this phenomenon may be a misunderstanding of the European experience with integration. In this article, we discuss the theories that have been developed to account for integration in Europe and may prove useful to understand integration elsewhere and put forward a set of lessons that could be drawn from the European experience. Subsequently, we introduce a description of the experience of integration in South America and reflect (critically) on how the theories and lessons drawn from the EU could be applied to this region –and beyond.

Leading indicator properties of US high-yield credit spreads

In this paper we examine the out-of-sample forecast performance of high-yield credit spreads regarding real-time and revised data on employment and industrial production in the US. We evaluate models using both a point forecast and a probability forecast exercise. Our main findings suggest the use of few factors obtained by pooling information from a number of sector-specific high-yield credit spreads. This can be justified by observing that, especially for employment, there is a gain from using a principal components model fitted to high-yield credit spreads compared to the prediction produced by benchmarks, such as an AR, and ARDL models that use either the term spread or the aggregate high-yield spread as exogenous regressor. Moreover, forecasts based on real-time data are generally comparable to forecasts based on revised data. JEL Classification: C22; C53; E32 Keywords: Credit spreads; Principal components; Forecasting; Real-time data.

Tritordeum, wheat and triticale yield components under multi-local mediterranean drought conditions

The species x location interaction was of great importance in explaining the behaviour of genetic material. The study presented here shows, for the first time, the performance, under field conditions of the new tritordeum species, compared to wheat and triticale in a wide range of Mediterranean countries (Spain, Lebanon and Tunisia). The results obtained revealed that despite the diversity of environmental conditions, the main differences in yield were due to genotypes, especially to differences between species. The multi-local study with different growth conditions revealed important information about the water availability effect on yield. In the lowest yielding environments (Tunisia rainfed), Tritordeum and triticale yields were equivalent. However under better growth conditions (Spain), tritordeum yield was shown to be lower than wheat and triticale. Interestingly, when water limitation was extended during the pre-anthesis period, differences in tritordeum versus wheat-triticale yield rate were larger than when water stress occurred during anthesis. These variations were explained by the fact that kernel weight has been found as the limiting factor for yield determination in tritordeum, and a delay in the anthesis date may have been the cause for the low kernel weight and low yield under Mediterranean drought conditions. Such differences in yield between tritordeum and wheat or triticale could be explained by the fact that tritordeum is a relatively new species and far fewer resources have been devoted to its improvement when compared to wheat and triticale. Our results suggest that breeding efforts should be directed to an earlier anthesis date and a longer grain filling period. tritordeum proved to have possibilities to be grown under drought environments as a new crop, since its performance was quite close to wheat and triticale. Besides, it has qualitative added values that may improve farmers' income per unit land.

A cognitive attempt to understanding female entrepreneurial potential: the role of social norms and culture

This article analyzes the different perceptions of both male and female potential entrepreneurs from three European regions differing in their respective level of economic development and entrepreneurial culture. We use an extended cognitive model of entrepreneurial intentions based on the theory of planned behaviour, the theory of normative social behaviour and social capital literature. Results show females have lower self-efficacy and entrepreneurial attraction than males, thus leading to lower entrepreneurial intention. Differences between the three subsamples are small when males are studied. However, female entrepreneurial intentions and perceptions are more affected by the cultural context.

Potential isomorphism of elementary substructures of a strictly stable homogeneous model

"Vegeu el resum a l'inici del document del fitxer adjunt."

WMR navigation using local potential field corridors and narrow local occupancy grid perception

Path planning and control strategies applied to autonomous mobile robots should fulfil safety rules as well as achieve final goals. Trajectory planning applications should be fast and flexible to allow real time implementations as well as environment interactions. The methodology presented uses the on robot information as the meaningful data necessary to plan a narrow passage by using a corridor based on attraction potential fields that approaches the mobile robot to the final desired configuration. It employs local and dense occupancy grid perception to avoid collisions. The key goals of this research project are computational simplicity as well as the possibility of integrating this method with other methods reported by the research community. Another important aspect of this work consist in testing the proposed method by using a mobile robot with a perception system composed of a monocular camera and odometers placed on the two wheels of the differential driven motion system. Hence, visual data are used as a local horizon of perception in which trajectories without collisions are computed by satisfying final goal approaches and safety criteria