Taxation of nuclear waste in Spain

Law 15/2012 established in Spain four new environmental taxes and extended the scope objective excise duties on mineral oils to tax the use of natural gas and coal as sources of electricity. One of the newly created taxes falls on all electric power producers, and has as tax base the turnover. The second one tax hydropower production, and the other two fall on the nuclear industry. So, there are two new taxes in Spain on the production of electricity from nuclear sources. The first one is a tax on nuclear waste production; the second one is a tax on the storage of nuclear waste. However, these are not the only levies in the Spanish tax system affecting nuclear waste. At the State level there are already several charges on nuclear waste. At the regional level, on the other hand, two Autonomous Communities were taxing nuclear waste. The creation of these new State taxes will finish with the regional taxes, but the State will be oblige to compensate these regions for losing revenues. The purpose of this work is to carry out a critical analysis of the Spanish system of taxation on nuclear waste.

External sources of innovation and industry-university interaction:evidence from Spanish firms

This paper is about the firm innovation process and the cooperation of the innovative firms with other firms and public institutions. A special attention is paid to the cooperation with universities. We use the Technological Innovation Survey (TIS) from the Instituto Nacional de Estadística (Spain) in order to obtain data for 4,159 innovative firms. Our results show that firm's cooperation activities are closely linked to the characteristics of the industry and the firm as well as to the origin of public funds for R&D activities. Key words: Innovation, universities, Spanish economy. JEL code: O31, I20, L60

New business formation and employment growth: some evidence for the Spanish manufacturing industry

This paper explores the effects of new business formation on employment growth in Spanish manufacturing industries. New firms are believed to make an important contribution to economic growth but the extent of this contribution is unclear. We consider time lags of new firm formation as explanatory variables of employment change and identify how long the effect of new firm entries on employment lasts. Our main results show that the effects of new business formation are positive in the short term, negative in the medium term and positive in the long term, thus confirming the existence of indirect supply-side effects found in similar studies for other countries. Key words: regional growth, firm entry, time lags and Spanish economy. JEL classifications: L00, L60, R11, R12

Transferring QTL technology to the pig breeding industry (PigQTech) - a demonstration project

The aim of the project has been to demonstrate how the farm animal breeding industry can utilise gene mapping technology to accelerate genetic improvement. Previous theoretical studies had suggested that the use of marker assisted selection could potentially increase the annual improvement for quantitative traits like backfat with about 10% and for more difficult traits such as meat quality and reproduction by as much as 40-60% compared with existing technology. The work has comprised two major tasks: 1. Commercially relevant populations have been screened for segregation at QTLs identified in experimental populations. The aim has been to establish optimal strategies for QTL detection in commercial pig populations and the extent to which QTLs explaining major phenotypic differences between divergent lines used in experimental studies also explain quantitative variation within commercial lines. The results are important for specifying future strategies for finding economically valuable QTLs. 2. Marker assisted backcrossing has been used to demonstrate how a QTL allele can be introgressed from one breed to another. The work has focused on the major fatness QTL on pig chromosome 4 previously identified in a wild pig/Large White intercross. The end result was not designed to be a commercially viable product in its own right, but the process has validated a number of points of major importance for the exploitation of QTLs in livestock.

Which firms want PhDs? The effect of the university-industry relationship on the PhD labour market

PhD graduates hold the highest education degree, are trained to conduct research and can be considered a key element in the creation, commercialization and diffusion of innovations. The impact of PhDs on innovation and economic development takes place through several channels such as the accumulation of scientific capital stock, the enhancement of technology transfers and the promotion of cooperation relationships in innovation processes. Although the placement of PhDs in industry provides a very important mechanism for transmitting knowledge from universities to firms, information about the characteristics of the firms that employ PhDs is very scarce. The goal of this paper is to improve understanding of the determinants of the demand for PhDs in the private sector. Three main potential determinants of the demand for PhDs are considered: cooperation between firms and universities, R&D activities of firms and several characteristics of firms, size, sector, productivity and age. The results from the econometric analysis show that cooperation between firms and universities encourages firms to recruit PhDs and point to the existence of accumulative effects in the hiring of PhD graduates.

Industrial district effects and innovation in the Tuscan shipbuilding industry

The aim of the present work is to investigate innovative processes within a geographical cluster, and thus contribute to the debate on the effects of industrial clusters on innovation capacity. In particular, we would like to ascertain whether the advantages of industrial districts in promoting innovation, as already revealed by literature (diffusion of knowledge, social capital and trust, efficient networking), are also keys to success in the Tuscan shipbuilding industry of pleasure and sporting boats. First, we verify the existence of clusters of shipbuilding in Tuscany, using a specific methodology. Next, in the identified clusters, we analyse three innovative networks financed in a policy to support innovation, and examine whether the typical features of a cluster for promoting innovation are at work, using a questionnaire administered to 71 actors. Finally, we develop a performance analysis of the cluster firms and ascertain whether their different behaviours also lead to different performances. The analysis results show that our case records effects of industrial clustering on innovation capacity, such as the important role given to trust and social capital, the significant worth put in interfirm relations and in each partner’s specific competencies, or even the distinctive performance of firms belonging to a cluster.

Anàlisi ambiental de les platges de Sitges: evolució de la qualitat del litoral i estudi d'impactes

L’explosió del sector turístic experimentat en les costes catalanes des de principis dels anys 60 ha provocat un important impacte sobre el medi litoral català i el seu principal atractiu turístic, les platges. Sitges és un municipi annex a una important zona urbana (Barcelona), i s'ofereix com a indret de segona residència i ciutat de vacances, sobretot a l’estiu, incrementant fortament la pressió sobre el medi. L'objectiu principal d'aquest projecte ha estat estudiar les pertorbacions sobre alguns aspectes del sistema litoral Sitgetà: el perfil litoral i la dinàmica sedimentària, la qualitat microbiològica de les aigües i la sorra, els cabals d'aigües residuals tractades i els residus de les platges. A partir dels registres de neteja en platges, proposem el rebuig i envasos en sorra (concentració de residus, kg/m2) com a nou indicador de presència d’usuaris a les platges (usuaris/m2). La diagnosi realitzada indica que l'estat físic de les platges de Sitges respon a les actuacions en matèria d'obres marítimes en interacció amb les dinàmiques sedimentaries. Pel que fa als anàlisis microbiològics de l'aigua i la sorra trobem una situació regulada a excepció de pics provocats per pluges puntuals. Malauradament hem vist com es podrien potenciar el valors ambientals de totes les parts treballades si es fomentessin figures de protecció del medi, la regeneració d’espècies vegetals tan fora com dins de l'aigua i es garantís una gestió de l’aigua 100% eficient i sense causar intromissions en el desenvolupament dels ecosistemes.

Technology, business models and network structure in the airline industry

Network airlines have been increasingly focusing their operations on hub airports through the exploitation of connecting traffic, allowing them to take advantage of economies of traffic density, which are unequivocal in the airline industry. Less attention has been devoted to airlines? decisions on point-to-point thin routes, which could be served using different aircraft technologies and different business models. This paper examines, both theoretically and empirically, the impact on airlines ?networks of the two major innovations in the airline industry in the last two decades: the regional jet technology and the low-cost business model. We show that, under certain circumstances, direct services on point-to-point thin routes can be viable and thus airlines may be interested in deviating passengers out of the hub.

Italy's urban waste metabolism

The problem of waste management is causing growing concern due to increasing generation rates, the emissions into soil, water and air, the social conflicts derived from the election of disposal sites and the loss of resources and energy among others. In this work, an innovative methodology is used to enable a better understanding of the waste generation and management system in Italy. Two new waste indicators are built to complement the conventional indicators used by official statistics. Then a multi-scale analysis of the Density of Waste Disposed (DWD) is carried out to highlight the territorial diversity of waste performances and test its contribution to detect plausible risky areas. Starting from Italian regions, the scale down goes on to the provincial level and, only for the region of Campania, the municipal one. First, the analysis shows that the DWD is able to complement the information provided by the conventional waste indicators. Second, the analysis shows the limitations of using a unique institutional solution to waste management problems. In this sense the multi-scale analysis provides with a more realistic picture of Italian waste system than using a single scale.

Origins and efficiency of the electric industry regulation in Spain, 1910-1936

The aim of this paper is to discover the origins of utility regulation in Spain, and to analyse, from a microeconomic perspective, its characteristics and the impact of regulation on consumers and utilities. Madrid and the Madrilenian utilities are taken as a case study. The electric industry in the period studied was a natural monopoly2. Each of the three phases of production, generation, transmission and distribution, had natural monopoly characteristics. Therefore, the most efficient form to generate, transmit and distribute electricity was the monopoly because one firm can produce a quantity at a lower cost than the sum of costs incurred by two or more firms. A problem arises because when a firm is the single provider it can charge prices above the marginal cost, at monopoly prices. When a monopolist reduces the quantity produced, price increases, causing the consumer to demand less than the economic efficiency level, incurring a loss of consumer surplus. The loss of the consumer surplus is not completely gained by the monopolist, causing a loss of social surplus, a deadweight loss. The main objective of regulation is going to be to reduce to a minimum the deadweight loss. Regulation is also needed because when the monopolist fixes prices at marginal cost equal marginal revenue there would be an incentive for firms to enter the market creating inefficiency. The Madrilenian industry has been chosen because of the availability of statistical information on costs and production. The complex industry structure and the atomised demand add interest to the analysis. This study will also provide some light on the tariff regulation of the period which has been poorly studied and will complement the literature on the US electric utilities regulation where a different type of regulation was implemented.

Technology, business models and network structure in the airline industry

Network airlines have been increasingly focusing their operations on hub airports through the exploitation of connecting traffic, allowing them to take advantage of economies of traffic density, which are unequivocal in the airline industry. Less attention has been devoted to airlines' decisions on point-to-point thin routes, which could be served using different aircraft technologies and different business models. This paper examines, both theoretically and empirically, the impact on airlines' networks of the two major innovations in the airline industry in the last two decades: the regional jet technology and the low-cost business model. We show that, under certain circumstances, direct services on point-to-point thin routes can be viable and thus airlines may be interested in deviating passengers out of the hub. Keywords: regional jet technology; low-cost business model; point-to-point network; hub-and-spoke network JEL Classi…fication Numbers: L13; L2; L93

Price policies and Price dispersion in the private healthcare insurance industry: The Catalan case

We present an overlapping generations model that explains price dispersion among Catalonian healthcare insurance firms. The model shows that firms with different premium policies can coexist. Furthermore, if interest rates are low, firms that apply equal premium to all insureds can charge higher average prices than insurers that set premiums according to the risk of insured. Economic theory, health insurance, health economics.

Profitability, uncertainty and multi-product firm product proliferation: The Spanish car industry

This article studies how product introduction decisions relate to profitability and uncertainty in the context of multi-product firms and product differentiation. These two features, common to many modern industries, have not received much attention in the literature as compared to the classical problem of firm entry, even if the determinants of firm and product entry are quite different. The theoretical predictions about the sign of the impact of uncertainty on product entry are not conclusive. Therefore, an econometric model relating firms’ product introduction decisions with profitability and profit uncertainty is proposed. Firm’s estimated profits are obtained from a structural model of product demand and supply, and uncertainty is proxied by profits’ variance. The empirical analysis is carried out using data on the Spanish car industry for the period 1990-2000. The results show a positive relationship between product introduction and profitability, and a negative one with respect to profit variability. Interestingly, the degree of uncertainty appears to be a driving force of entry stronger than profitability, suggesting that the product proliferation process in the Spanish car market may have been mainly a consequence of lower uncertainty rather than the result of having a more profitable market. Keywords: Product introduction, entry, uncertainty, multiproduct firms, automobile JEL codes: L11, L13

Testing Delivery Systems in Transnational virtual learning: the vocational management training for the european tourism industry (VocMat) case study

This article discusses the lessons learned from developing and delivering the Vocational Management Training for the European Tourism Industry (VocMat) online training programme, which was aimed at providing flexible, online distance learning for the European tourism industry. The programme was designed to address managers ‘need for flexible, senior management level training which they could access at a time and place which fitted in with their working and non-work commitments. The authors present two main approaches to using the Virtual Learning Environment, the feedback from the participants, and the implications of online Technology in extending tourism training opportunities

Profitability, uncertainty and multi-product firm product proliferation: The Spanish car industry

This article studies how product introduction decisions relate to profitability and uncertainty in the context of multi-product firms and product differentiation. These two features, common to many modern industries, have not received much attention in the literature as compared to the classical problem of firm entry, even if the determinants of firm and product entry are quite different. The theoretical predictions about the sign of the impact of uncertainty on product entry are not conclusive. Therefore, an econometric model relating firms’ product introduction decisions with profitability and profit uncertainty is proposed. Firm’s estimated profits are obtained from a structural model of product demand and supply, and uncertainty is proxied by profits’ variance. The empirical analysis is carried out using data on the Spanish car industry for the period 1990-2000. The results show a positive relationship between product introduction and profitability, and a negative one with respect to profit variability. Interestingly, the degree of uncertainty appears to be a driving force of entry stronger than profitability, suggesting that the product proliferation process in the Spanish car market may have been mainly a consequence of lower uncertainty rather than the result of having a more profitable market