Effect of high pressure processing on the microbiology of skin-vacuum packaged sliced meat products: cooked pork ham, dry cured pork ham and marinated beef loin

High hydrostatic pressure is being increasingly investigated in food processing. It causes microbial inactivation and therefore extends the shelf life and enhances the safety of food products. Yeasts, molds, and vegetative cells of bacteria can be inactivated by pressures in the range of 200 to 700 MPa. Microorganisms are more or less sensitive to pressure depending on several factors such as type, strain and the phase or state of the cells. In general, Gram-positive organisms are usually more resistant than Gram-negative. High pressure processing modifies the permeability of the cell membrane, the ion exchange and causes changes in morphology and biochemical reactions, protein denaturations and inhibition of genetic mechanisms. High pressure has been used successfully to extend the shelf life of high-acid foods such as refrigerated fruit juices, jellies and jams. There is now an increasing interest in the use of this technology to extend the shelf life of low-acid foods such as different types of meat products.

Hadronic vacuum polarization and the Lamb shift

Recent improvements in the determination of the running of the fine-structure constant also allow an update of the hadronic vacuum-polarization contribution to the Lamb shift. We find a shift of -3.40(7) kHz to the 1S level of hydrogen. We also comment on the contribution of this effect to the determination by elastic electron scattering of the rms radii of nuclei.

Procedure to characterize microroughness of optical thin films: application to ion-beam-sputtered vacuum-ultraviolet coatings

A method for characterizing the microroughness of samples in optical coating technology is developed. Measurements over different spatial-frequency ranges are composed into a single power spectral density (PSD) covering a large bandwidth. This is followed by the extraction of characteristic parameters through fitting of the PSD to a suitable combination of theoretical models. The method allows us to combine microroughness measurements performed with different techniques, and the fitting procedure can be adapted to any behavior of a combined PSD. The method has been applied to a set of ion-beam-sputtered fluoride vacuum-UV coatings with increasing number of alternative low- and high-index layers. Conclusions about roughness development and microstructural growth are drawn.

Vacuum decay in quantum field theory

We study the contribution to vacuum decay in field theory due to the interaction between the long- and short-wavelength modes of the field. The field model considered consists of a scalar field of mass M with a cubic term in the potential. The dynamics of the long-wavelength modes becomes diffusive in this interaction. The diffusive behavior is described by the reduced Wigner function that characterizes the state of the long-wavelength modes. This function is obtained from the whole Wigner function by integration of the degrees of freedom of the short-wavelength modes. The dynamical equation for the reduced Wigner function becomes a kind of Fokker-Planck equation which is solved with suitable boundary conditions enforcing an initial metastable vacuum state trapped in the potential well. As a result a finite activation rate is found, even at zero temperature, for the formation of true vacuum bubbles of size M-1. This effect makes a substantial contribution to the total decay rate.

Quantum fluctuations on domain walls, strings, and vacuum bubbles

We develop a covariant quantum theory of fluctuations on vacuum domain walls and strings. The fluctuations are described by a scalar field defined on the classical world sheet of the defects. We consider the following cases: straight strings and planar walls in flat space, true vacuum bubbles nucleating in false vacuum, and strings and walls nucleating during inflation. The quantum state for the perturbations is constructed so that it respects the original symmetries of the classical solution. In particular, for the case of vacuum bubbles and nucleating strings and walls, the geometry of the world sheet is that of a lower-dimensional de Sitter space, and the problem reduces to the quantization of a scalar field of tachyonic mass in de Sitter space. In all cases, the root-mean-squared fluctuation is evaluated in detail, and the physical implications are briefly discussed.

Massless minimally coupled fields in de Sitter space: O(4)-symmetric states versus de Sitter invariant vacuum

The issue of de Sitter invariance for a massless minimally coupled scalar field is examined. Formally, it is possible to construct a de Sitterinvariant state for this case provided that the zero mode of the field is quantized properly. Here we take the point of view that this state is physically acceptable, in the sense that physical observables can be computed and have a reasonable interpretation. In particular, we use this vacuum to derive a new result: that the squared difference between the field at two points along a geodesic observers spacetime path grows linearly with the observers proper time for a quantum state that does not break de Sitter invariance. Also, we use the Hadamard formalism to compute the renormalized expectation value of the energy-momentum tensor, both in the O(4)-invariant states introduced by Allen and Follaci, and in the de Sitterinvariant vacuum. We find that the vacuum energy density in the O(4)-invariant case is larger than in the de Sitterinvariant case.

Dissipation, noise and vacuum decay in quantum field theory

We study the process of vacuum decay in quantum field theory focusing on the stochastic aspects of the interaction between long- and short-wavelength modes. This interaction results in a diffusive behavior of the reduced Wigner function describing the state of long-wavelength modes, and thereby to a finite activation rate even at zero temperature. This effect can make a substantial contribution to the total decay rate.

Desconnexió de la xarxa

Treball de recerca realitzat per un alumne d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit cientí­fic del Jovent l'any 2009. Aquest treball es planteja com un repte la necessitat de connexió a una xarxa de subministrament elèctric i d'aigua. L'objectiu del treball ha estat comprovar si, tan tècnicament com econòmica, es pot aconseguir l'autosuficiència d'una casa de muntanya del Vallès Oriental tot aprofitant els recursos que ens ofereix el medi, però sense haver de renunciar al nivell de vida al qual ens hem acostumat durant els darrers anys. Després d'una recollida de dades i valoració del consum energètic mínim que volem imposar, hem dissenyat una instal·lació capaç d'aprofitar les energies renovables de l'entorn i de satisfer les nostres necessitats. La instal·lació inclou plaques fotovoltaiques, col·lectors solars, cisternes per a la recollida d'aigua, bombes, etc. Finalment, s'inclou un pressupost d'aquesta instal·lació, que indica que els diners que caldria invertir són massa. Es demostra, doncs, que l'autosuficiència d'aquesta casa és tècnicament viable, però econòmicament inviable (o gens rendible).

Casolà o industrial?: estudi organolèptic i microbiològic de la vida útil del pernil cuit

Treball de recerca realitzat per un alumne d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l'any 2009. Aquest treball tracta sobre el temps de garantia o de vida útil d’un producte alimentari i està basat en esbrinar quin és el millor mètode o envàs per conservar el pernil cuit llescat durant la seva vida útil, per tal que es mantinguin les propietats organolèptiques i microbiològiques inicials de l’aliment durant el màxim de temps possible. Per comparar envasos he utilitzat els industrials (envàs al buit i envàs en atmosfera) i els envasos que podem trobar quan comprem un producte llescat en el mostrador d’una botiga o supermercat. Per a fer l’estudi doncs s’ha utilitzat el pernil cuit, conegut com a pernil dolç, un dels productes més consumits per la societat actual. El pernil ha estat tractat en tres situacions diferents: llescat en una màquina de carnisseria i envasat en mètodes de conservació domèstics, llescat en màquines industrials i envasat en diferents envasos (al buit i en atmosfera modificada) utilitzats per les grans empreses i llescat en màquines industrials i envasat al buit sotmès a un tractament amb altes pressions. Després d’aquests processos s’ha realitzat un estudi de vida útil, és a dir, s’ha analitzat el producte al laboratori, amb l’objectiu de trobar quin és el millor envàs per a la conservació del pernil cuit.

Instrumentació i control d'actuadors fluídics per a sistemes analítics: sistema de regulació d'una microbomba de precisió a mode de xeringa

En aquest projecte s’ha implementat un sistema de control per a les bombes microfluídiques LPVX de The Lee Company funcionant a mode de xeringa. El sistema consisteix en un circuit controlador basat en el microxip UDN 296 B de Allegro MicroSystems, que conté dos Ponts en H per a controlar motors pas a pas i dos mòduls de Modulació d’Amplada de Polsos (PWM), governat a partir d’un programa de control com a instrument virtual dissenyat sota l’entorn LabVIEW. El programa de control permet indicar la quantitat de volum a aspirar o dispensar per la bomba i escollir entre una execució simple o una de continuada, podent-ne controlar en aquest segona opció el temps entre execució i execució. El programa també permet visualitzar el procés mitjançant la obtenció de la imatge d’una webcam amb DirectShow. Finalment també permet el control remot de l’Instrument Virtual a través de la xarxa d’Internet.

Primordial Perturbations in Einstein-Aether theories

El nostre objectiu es l'estudi d'extensions de la Relativitat General i, en particular, estem interessats en les teories que continguin camps vectorials addicionals. En aquests tipus de teories es necessari imposar que el vector ha de tenir norma fixa per evitar la presència d'un fantasma o grau de llibertat amb terme cinètic negatiu, i això implica que la simetria Lorentz està trencada espontàniament. El camp del aether només interactua gravitatòriament i la seva presència es difícil de detectar, no obstant això, durant inflació les fluctuacions del buit a escales petites d'un camp lleuger pot deixar una empremta en observables com les anisotropies del fons de radiació de microones. Les fluctuacions del Einstein-aether es comporten com els camps sense massa i això fa que inflació generi modes de longitud de ona llarga en els sectors escalar i vectorial. Hem estudiat la signatura del Einstein-aether dins l'espectre de pertorbacions primordials lluny del límit de de Sitter de inflació. Aquests modes escalars i vectorials poden deixar una empremta significativa en la radiació de fons de microones en funció dels paràmetres del model. Les observacions del fons de radiació de microones imposen restriccions fenomenològiques que redueixen els límits existents per aquesta classe de teoria. Amb aquest estudi del aether també esperem millorar el coneixement que tenim de una classe més ampla de teories que exhibeixen el mateix tipus de trencament de simetria.

Forces de Casimir i les seves aplicacions

Report for the scientific sojourn carried out at the Darmouth College, from august 2007 until february 2008. It has been very successful, from different viewpoints: scientific, philosophical, human. We have definitely advanced, during the past six months, towards the comprehension of the behaviour of the fluctuations of the quantum vacuum in the presence of boundaries, moving and non-moving, and also in situations where the topology of space-time changes: the dynamical Casimir effect, regularization problems, particle creation statistics, according to different BC, etc. We have solved some longstanding problems and got in this subject quite remarkable results (as we will explain in more detail below). We also pursued a general approach towards a viable modified f(R) gravity in both the Jordan and the Einstein frames (which are known to be mathematically equivalent, but physically not so). A class of exponential, realistic modified gravities has been introduced by us and investigated with care. Special focus was made on step-class models, most promising from the phenomenological viewpoint and which provide a natural way to classify all viable modified gravities. One- and two-steps models were considered, but the analysis is extensible to N-step models. Both inflation in the early universe and the onset of recent accelerated expansion arise in these models in a natural, unified way, what makes them very promising. Moreover, it is monstrated in our work that models in this category easily pass all local tests, including stability of spherical body solution, non-violation of Newton's law, and generation of a very heavy positive mass for the additional scalar degree of freedom.

Raman microprobe characterization of electrodeposited S-rich CuIn(S,Se)2 for photovoltaic applications: Microstructural analysis

This article reports a detailed Raman scattering and microstructural characterization of S-rich CuIn(S,Se)2 absorbers produced by electrodeposition of nanocrystalline CuInSe2 precursors and subsequent reactive annealing under sulfurizing conditions. Surface and in-depth resolved Raman microprobe measurements have been correlated with the analysis of the layers by optical and scanning electron microscopy, x-ray diffraction, and in-depth Auger electron spectroscopy. This has allowed corroboration of the high crystalline quality of the sulfurized layers. The sulfurizing conditions used also lead to the formation of a relatively thick MoS2 intermediate layer between the absorber and the Mo back contact. The analysis of the absorbers has also allowed identification of the presence of In-rich secondary phases, which are likely related to the coexistence in the electrodeposited precursors of ordered vacancy compound domains with the main chalcopyrite phase, in spite of the Cu-rich conditions used in the growth. This points out the higher complexity of the electrodeposition and sulfurization processes in relation to those based in vacuum deposition techniques.

Influence of premetallization surface treatment on the formation of Schottky Au-nGaN contacts

The influence of premetallization surface preparation on the structural, chemical, and electrical properties of Au-nGaN interfaces has been investigated by x-ray photoemission spectroscopy (XPS), current-voltage measurement (I-V) and cross-section transmission electron microscopy (TEM). XPS analysis showed that the three GaN substrate treatments investigated i.e., ex situ hydrofluoric acid etch, in situ anneal in ultrahigh-vacuum (UHV), and in situ Ga reflux cleaning in UHV result in surfaces increasingly free of oxygen contamination. XPS and TEM characterization of Au-nGaN formed after the three premetallization surface treatments show that HF etching and UHV annealing produce abrupt, well-defined interfaces. Conversely, GaN substrate cleaning in a Ga flux results in Au/GaN intermixing. I-V characterization of Au¿nGaN contacts yields a Schottky barrier height of 1.25 eV with a very low-ideality factor and very good contact uniformity for the premetallization UHV anneal, while the Ga reflux cleaning results in a much lower barrier (0.85 eV), with poor ideality and uniformity. I-V and XPS results suggest a high density of acceptor states at the surface, which is further enhanced by UHV annealing. These results are discussed in the context of current models of Schottky barrier formation.