Tax reforms and inequality: theoretical and empirical implications

In this paper we examine the effect of tax policy on the relationship between inequality and growth in a two-sector non-scale model. With non-scale models, the longrun equilibrium growth rate is determined by technological parameters and it is independent of macroeconomic policy instruments. However, this fact does not imply that fiscal policy is unimportant for long-run economic performance. It indeed has important effects on the different levels of key economic variables such as per capita stock of capital and output. Hence, although the economy grows at the same rate across steady states, the bases for economic growth may be different.The model has three essential features. First, we explicitly model skill accumulation, second, we introduce government finance into the production function, and we introduce an income tax to mirror the fiscal events of the 1980¿s and 1990¿s in the US. The fact that the non-scale model is associated with higher order dynamics enables it to replicate the distinctly non-linear nature of inequality in the US with relative ease. The results derived in this paper attract attention to the fact that the non-scale growth model does not only fit the US data well for the long-run (Jones, 1995b) but also that it possesses unique abilities in explaining short term fluctuations of the economy. It is shown that during transition the response of the relative simulated wage to changes in the tax code is rather non-monotonic, quite in accordance to the US inequality pattern in the 1980¿s and early 1990¿s.More specifically, we have analyzed in detail the dynamics following the simulation of an isolated tax decrease and an isolated tax increase. So, after a tax decrease the skill premium follows a lower trajectory than the one it would follow without a tax decrease. Hence we are able to reduce inequality for several periods after the fiscal shock. On the contrary, following a tax increase, the evolution of the skill premium remains above the trajectory carried on by the skill premium under a situation with no tax increase. Consequently, a tax increase would imply a higher level of inequality in the economy

Thermal modeling and management in ultrathin chip stack technology

This paper presents a thermal modeling for power management of a new three-dimensional (3-D) thinned dies stacking process. Besides the high concentration of power dissipating sources, which is the direct consequence of the very interesting integration efficiency increase, this new ultra-compact packaging technology can suffer of the poor thermal conductivity (about 700 times smaller than silicon one) of the benzocyclobutene (BCB) used as both adhesive and planarization layers in each level of the stack. Thermal simulation was conducted using three-dimensional (3-D) FEM tool to analyze the specific behaviors in such stacked structure and to optimize the design rules. This study first describes the heat transfer limitation through the vertical path by examining particularly the case of the high dissipating sources under small area. First results of characterization in transient regime by means of dedicated test device mounted in single level structure are presented. For the design optimization, the thermal draining capabilities of a copper grid or full copper plate embedded in the intermediate layer of stacked structure are evaluated as a function of the technological parameters and the physical properties. It is shown an interest for the transverse heat extraction under the buffer devices dissipating most the power and generally localized in the peripheral zone, and for the temperature uniformization, by heat spreading mechanism, in the localized regions where the attachment of the thin die is altered. Finally, all conclusions of this analysis are used for the quantitative projections of the thermal performance of a first demonstrator based on a three-levels stacking structure for space application.

Tax reforms and inequality: theoretical and empirical implications

In this paper we examine the effect of tax policy on the relationship between inequality and growth in a two-sector non-scale model. With non-scale models, the longrun equilibrium growth rate is determined by technological parameters and it is independent of macroeconomic policy instruments. However, this fact does not imply that fiscal policy is unimportant for long-run economic performance. It indeed has important effects on the different levels of key economic variables such as per capita stock of capital and output. Hence, although the economy grows at the same rate across steady states, the bases for economic growth may be different.The model has three essential features. First, we explicitly model skill accumulation, second, we introduce government finance into the production function, and we introduce an income tax to mirror the fiscal events of the 1980¿s and 1990¿s in the US. The fact that the non-scale model is associated with higher order dynamics enables it to replicate the distinctly non-linear nature of inequality in the US with relative ease. The results derived in this paper attract attention to the fact that the non-scale growth model does not only fit the US data well for the long-run (Jones, 1995b) but also that it possesses unique abilities in explaining short term fluctuations of the economy. It is shown that during transition the response of the relative simulated wage to changes in the tax code is rather non-monotonic, quite in accordance to the US inequality pattern in the 1980¿s and early 1990¿s.More specifically, we have analyzed in detail the dynamics following the simulation of an isolated tax decrease and an isolated tax increase. So, after a tax decrease the skill premium follows a lower trajectory than the one it would follow without a tax decrease. Hence we are able to reduce inequality for several periods after the fiscal shock. On the contrary, following a tax increase, the evolution of the skill premium remains above the trajectory carried on by the skill premium under a situation with no tax increase. Consequently, a tax increase would imply a higher level of inequality in the economy

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders

Collaboration strategies and technological innovation: a contractual perspective of the relationship between firms and techonological centers

In this paper, a theoretical framework for analyzing the selection of governance structures for implementing collaboration agreements between firms and Technological Centers is presented and empirically discussed. This framework includes Transaction Costs and Property Rights’ theoretical assumptions, though complemented with several proposals coming from the Transactional Value Theory. This last theory is used for adding some dynamism in the governance structure selection. As empirical evidence of this theoretical explanation, we analyse four real experiences of collaboration between firms and one Technological Center. These experiences are aimed to represent the typology of relationships which Technological Centers usually face. Among others, a key interesting result is obtained: R&D collaboration activities do not need to always be organized through hierarchical solutions. In those cases where future expected benefits and/or reputation issues could play an important role, the traditional more static theories could not fully explain the selected governance structure for managing the R&D relationship. As a consequence, these results justify further research about the adequacy of the theoretical framework presented in this paper in other contexts, for example, R&D collaborations between firms and/or between Universities or Public Research Centers and firms.

Technological trampolines for new venture creation in Catalonia: the case of the University of Girona

Recent trends in technology transfer show an intensification of spin-off creation as a modality of university research commercialisation, complementary to the conventional ones, contract research and licensing. In this paper we analyse the evolution, objectives, resources and activities of a specialised unit –Technological Trampoline (TT) - in charge of new venture creation at the University of Girona (Catalonia-Spain). Based on two theoretical frameworks, Resource-based-view and Institutional Theory, we adopt a multi-dimensional approach to study the strategy of spinning-off new ventures at the University of Girona in terms of resources and activities, how this process is organised and if the outputs fit with this UdG’s objectives and the local environment. Our main contribution is an in-depth analysis of the spin-off creation unit with special emphasis on its variety of resources and activities. The results have a series of implications and recommendations at both university and TT level.

Simulations of parasitic and intrinsic capacitances related to Multiple-Gate-Field-Effect Transistor architectures

Report for the scientific sojourn carried out at the Université Catholique de Louvain, Belgium, from March until June 2007. In the first part, the impact of important geometrical parameters such as source and drain thickness, fin spacing, spacer width, etc. on the parasitic fringing capacitance component of multiple-gate field-effect transistors (MuGFET) is deeply analyzed using finite element simulations. Several architectures such as single gate, FinFETs (double gate), triple-gate represented by Pi-gate MOSFETs are simulated and compared in terms of channel and fringing capacitances for the same occupied die area. Simulations highlight the great impact of diminishing the spacing between fins for MuGFETs and the trade-off between the reduction of parasitic source and drain resistances and the increase of fringing capacitances when Selective Epitaxial Growth (SEG) technology is introduced. The impact of these technological solutions on the transistor cut-off frequencies is also discussed. The second part deals with the study of the effect of the volume inversion (VI) on the capacitances of undoped Double-Gate (DG) MOSFETs. For that purpose, we present simulation results for the capacitances of undoped DG MOSFETs using an explicit and analytical compact model. It monstrates that the transition from volume inversion regime to dual gate behaviour is well simulated. The model shows an accurate dependence on the silicon layer thickness,consistent withtwo dimensional numerical simulations, for both thin and thick silicon films. Whereas the current drive and transconductance are enhanced in volume inversion regime, our results show thatintrinsic capacitances present higher values as well, which may limit the high speed (delay time) behaviour of DG MOSFETs under volume inversion regime.

Relationship between technological progress, capital elasticity and emissions of industrial pollutants for the production sectors in Catalonia

As is known, the Kyoto Protocol proposes to reinforce national policies for emission reduction and, furthermore, to cooperate with other contracting parties. In this context, it would be necessary to assess these emissions, both in general and specifically, by pollutants and/or among productive sectors. The object of this paper is precisely to estimate the polluting emissions of industrial origin in Catalonia in the year 2001, in a multivariate context which explicitly allows a distinction to be made between the polluter and/or the productive sector causing this emission. Six pollutants considered, four directly related to greenhouse effect. A multi-level model, with two levels, pollutants and productive sectors, was specified. Both technological progress and elasticity of capital were introduced as random effects. Hence, it has been permitted that these coefficients vary according to one or other level. The most important finding in this paper is that elasticity of capital has been estimated as very non-elastic, with a range which varies between 0.162 (the paper industry) and 0.556 (commerce). In fact, and generally speaking, the greater capital the sector has, the less elasticity of capital has been estimated. Key words: Kyoto protocol, multilevel model, technological progress

Technological adoption in health care

This paper addresses the impact of payment systems on the rate of technology adoption. We present a model where technological shift is driven by demand uncertainty, increased patients' benefit, financial variables, and the reimbursement system to providers. Two payment systems are studied: cost reimbursement and (two variants of) DRG. According to the system considered, adoption occurs either when patients' benefits are large enough or when the differential reimbursement across technologies offsets the cost of adoption. Cost reimbursement leads to higher adoption of the new technology if the rate of reimbursement is high relative to the margin of new vs. old technology reimbursement under DRG. Having larger patient benefits favors more adoption under the cost reimbursement payment system, provided that adoption occurs initially under both payment systems.

Technological innovation in creative clusters. The case of laser in conservation of artworks in Florence

The field of laser application to the restoration and cleaning of cultural assets is amongst the most thriving developments of recent times. Ablative laser technological systems are able to clean and protect inestimable works of art subject to atmospheric agents and degradation over time. This new technology, which has been developing for the last forty year, is now available to restorers and has received a significant success all over Europe. An important contribution in the process of laser innovation has been carried out in Florence by local actors belonging to a creative cluster. The objects of the analysis are the genesis of this innovation in this local Florentine context, and the relationships among the main actors who have contributed in it. The study investigates how culture can play a part in the generation of ideas and innovations, and which are the creative environments that can favour it. In this context, the issue of laser technologies for the restoration of cultural heritage has been analysed as a case study in the various paths taken by the Creative Capacity of the Culture (CCC).

The Innovation and Imitation Dichotomy in Spanish firms: do absorptive capacity and the technological frontier matter?

This paper analyses whether a firm’s absorptive capacity and its distance from the technological frontier affect the choice between innovation and imitation in innovative Spanish firms. From an extensive survey of 5,575 firms during the 2004-2009 period, we found two significant results. With regard to the role of absorptive capacity, the empirical evidence shows that when innovative firms have difficulties in accessing external information and hire skilled workers, their innovative capacity is reduced. Meanwhile, with regard to distance from the technological frontier, the firms that reduce this gap manage to increase their innovative capacity at the expense of imitation. To summarise, when we studied firms’ absorptive capacity and their relative position to the technological frontier in tandem, we found that the two factors directly affected firms' ability to innovate or imitate.

Innovation and absorptive capacity: What is the role of technological frontier?

This paper explores how absorptive capacity affects the innovative performance and productivity dynamics of Spanish firms. A firm’s efficiency levels are measured using two variables: the labour productivity and the Total Factor Productivity (TFP). The theoretical framework is based on the seminal contributions of Cohen and Levinthal (1989, 1990) regarding absorptive capacity; and the applied framework is based on the four-stage structural model proposed by Crépon, Duguet and Mairesse (1998) for setting the determinants of R&D, the effects of R&D activities on innovation outputs, and the impacts of innovation on firm productivity. The present study uses a twostage structural model. In the first stage, a probit estimation is used to investigate how the sources of R&D, the absorptive capacity and a vector of the firm’s individual features influence the firm’s likelihood of developing innovations in products or processes. In the second phase, a quantile regression is used to analyze the effect of R&D sources, absorptive capacity and firm characteristics on productivity. This method shows the elasticity of each exogenous variable on productivity according to the firms’ levels of efficiency, and thus allows us to distinguish between firms that are close to the technological frontier and those that are further away from it. We used extensive firm-level panel data from 5,575 firms for the 2004-2009 period. The results show that the internal absorptive capacity has a strong impact on the productivity of firms, whereas the role of external absorptive capacity differs according to nature of the each industry and according the distance of firms from the technological frontier. Key words: R&D sources, innovation strategies, absorptive capacity, technological distance, quantile regression.

The Innovation and Imitation Dichotomy in Spanish firms: do absorptive capacity and the technological frontier matter?

This paper analyses whether a firm’s absorptive capacity and its distance from the technological frontier affect the choice between innovation and imitation in innovative Spanish firms. From an extensive survey of 5,575 firms during the 2004-2009 period, we found two significant results. With regard to the role of absorptive capacity, the empirical evidence shows that when innovative firms have difficulties in accessing external information and hire skilled workers, their innovative capacity is reduced. Meanwhile, with regard to distance from the technological frontier, the firms that reduce this gap manage to increase their innovative capacity at the expense of imitation. To summarise, when we studied firms’ absorptive capacity and their relative position to the technological frontier in tandem, we found that the two factors directly affected firms' ability to innovate or imitate. Key words: R&D sources, innovation and imitation strategies, absorptive capacity, technological frontier, ordered probit.

OER in Portugal as agent of curriculum innovation and technological change. Inducing practices of "new" teaching standards

This research project aimed the following goal: promote the creation, use and disclosure of OER in a Group of Schools, involving schools and teachers from different learning levels, expecting to test and validate the use of OER, in a learning-teaching model towards curricular innovation. Defining as a starting point different subjects and teachers from distinct academic areas, we have implemented a set of activities leading to the creation of OER supported, when possible, in FLOSS tools. We adopted an action research methodology with a dual purpose: to act within a community of teachers and students, while increasing at the same time their knowledge, as well as the researcher's. The activity was developed cooperatively in order to process a certain reality of the teaching-learning process, through practical/reflective action towards it and inducing its implementation by others in the Portuguese School System, based on the production and sharing OER.

Open online courses in Colombia : report of an educational and technological experiment

Based on a discussion of the background, features and limitations of open online courses, this paper describes a technological solution to support their offering, built on online tools that don't require self-managed hosting. This is a proof of concept that intends to highlight the possibilities and obstacles related to this kind of educational practice in a Latin American context.