Analysis of S-rich CuIn(S,Se)2 layers for photovoltaic applications: Influence of the sulfurization temperature on the crystalline properties of electrodeposited and sulfurized CuInSe2 precursors

This paper reports the microstructural analysis of S-rich CuIn(S,Se)2 layers produced by electrodeposition of CuInSe2 precursors and annealing under sulfurizing conditions as a function of the temperature of sulfurization. The characterization of the layers by Raman scattering, scanning electron microscopy, Auger electron spectroscopy, and XRD techniques has allowed observation of the strong dependence of the crystalline quality of these layers on the sulfurization temperature: Higher sulfurization temperatures lead to films with improved crystallinity, larger average grain size, and lower density of structural defects. However, it also favors the formation of a thicker MoS2 interphase layer between the CuInS2 absorber layer and the Mo back contact. Decreasing the temperature of sulfurization leads to a significant decrease in the thickness of this intermediate layer and is also accompanied by significant changes in the composition of the interface region between the absorber and the MoS2 layer, which becomes Cu rich. The characterization of devices fabricated with these absorbers corroborates the significant impact of all these features on device parameters as the open circuit voltage and fill factor that determine the efficiency of the solar cells.

Raman microstructural analysis of silicon-on-insulator formed by high dose oxygen ion implantation: As-implanted structures

A microstructural analysis of silicon-on-insulator samples obtained by high dose oxygen ion implantation was performed by Raman scattering. The samples analyzed were obtained under different conditions thus leading to different concentrations of defects in the top Si layer. The samples were implanted with the surface covered with SiO2 capping layers of different thicknesses. The spectra measured from the as-implanted samples were fitted to a correlation length model taking into account the possible presence of stress effects in the spectra. This allowed quantification of both disorder effects, which are determined by structural defects, and residual stress in the top Si layer before annealing. These data were correlated to the density of dislocations remaining in the layer after annealing. The analysis performed corroborates the existence of two mechanisms that generate defects in the top Si layer that are related to surface conditions during implantation and the proximity of the top Si/buried oxide layer interface to the surface before annealing.

Measurement of the specific heat and determination of the thermodynamic functions of relaxed amorphous silicon

The specific heat, cp, of two amorphous silicon (a-Si) samples has been measured by differential scanning calorimetry in the 100–900K temperature range. When the hydrogen content is reduced by thermal annealing, cp approaches the value of crystalline Si (c-Si). Within experimental accuracy, we conclude that cp of relaxed pure a-Si coincides with that of c-Si. This result is used to determine the enthalpy, entropy, and Gibbs free energy of defect-free relaxed a-Si. Finally, the contribution of structural defects on these quantities is calculated and the melting point of several states of a-Si is predicted

Resistance Switching in Transparent Magnetic MgO Films

We have studied the abrupt and hysteretic changes of resistance in MgO-based capacitor devices. The switching behavior is discussed in terms of the formation and rupture of conduction filaments due to the migration of structural defects in the electric field, together with the redox events which affects the mobile carriers. The results presented in this paper suggest that MgO transparent films combining ferromagnetism and multilevel switching characteristics might pave the way for a new method for spintronic multibit data storage.

Assessing the structural change of strategic mobility: determinants under hypercompetitive environments

The primary purpose of this exploratory empirical study is to examine the structural stability of a limited number of alternative explanatory factors of strategic change. On the basis of theoretical arguments and prior empirical evidence from two traditional perspectives, we propose an original empirical framework to analyse whether these potential explanatory factors have remained stable over time in a highly turbulent environment. This original question is explored in a particular setting: the population of Spanish private banks. The firms of this industry have experienced a high level of strategic mobility as a consequence of fundamental changes undergone in their environmental conditions over the last two decades (mainly changes related to the new banking and financial regulation process). Our results consistently support that the effect of most explanatory factors of strategic mobility considered did not remain stable over the whole period of analysis. From this point of view, the study sheds new light on major debates and dilemmas in the field of strategy regarding why firms change their competitive patterns over time and, hence, to what extent the "contextdependency" of alternative views of strategic change as their relative validation can vary over time for a given population. Methodologically, this research makes two major contributions to the study of potential determinants of strategic change. First, the definition and measurement of strategic change employing a new grouping method, the Model-based Cluster Method or MCLUST. Second, in order to asses the possible effect of determinants of strategic mobility we have controlled the non-observable heterogeneity using logistic regression models for panel data.

The structural approach of a natrex model on equilibrium exchange rates

Following a general macroeconomic approach, this paper sets a closed micro-founded structural model to determine the long run real exchange rate of a developed economy. In particular, the analysis follows the structure of a Natrex model. The main contribution of this research paper is the development of a solid theoretical framework that analyse in depth the basis of the real exchange rate and the details of the equilibrium dynamics after any shock influencing the steady state. In our case, the intertemporal factors derived from the stock-flow relationship will be particularly determinant. The main results of the paper can be summarised as follows. In first place, a complete well-integrated structural model for long-run real exchange rate determination is developed from first principles. Moreover, within the concrete dynamics of the model, it is found that some convergence restrictions will be necessary. On one hand, for the medium run convergence the sensitivity of the trade balance to changes in real exchange rate should be higher that the correspondent one to the investment decisions. On the other hand, and regarding long-run convergence, it is also necessary both that there exists a negative relationship between investment and capital stock accumulation and that the global saving of the economy depends positively on net foreign debt accumulation. In addition, there are also interesting conclusions about the effects that certain shocks over the exogenous variables of the model have on real exchange rates.

The effect of structural fund spending on the spanish regions: an assessment of the 1994-99 objective 1 CSF

This paper analyzes the growth and employment effects of the 1994-99 Community Support Framework (CSF) for the Objective 1 Spanish regions using a simple supply-side model estimated with a panel of regional data. The results suggest that the impact of the Structural Funds in Spain has been quite sizable, adding around a percentage point to annual output growth in the average Objective 1 region and 0.4 points to employment growth. Over the period 1994-2000, the Framework has resulted in the creation of over 300,000 new jobs and has eliminated 20% of the initial gap in income per capita between the assisted regions and the rest of the country.

Structural inferences from first-price auction experiments

We use structural methods to assess equilibrium models of bidding with data from first-price auction experiments. We identify conditions to test the Nash equilibrium models for homogenous and for heterogeneous constant relative risk aversion when bidders private valuations are independent and uniformly drawn. The outcomes of our study indicate that behavior may have been affected by the procedure used to conduct the experiments and that the usual Nash equilibrium model for heterogeneous constant relative risk averse bidders does not consistently explain the observed overbidding. From an empirical standpoint, our analysis shows the possible drawbacks of overlooking the homogeneity hypothesis when testing symmetric equilibrium models of bidding and it puts in perspective the sensitivity of structural inferences to the available information.

Price level convergence, purchasing power parity and multiple structural breaks: an application to US cities

This article provides a fresh methodological and empirical approach for assessing price level convergence and its relation to purchasing power parity (PPP) using annual price data for seventeen US cities. We suggest a new procedure that can handle a wide range of PPP concepts in the presence of multiple structural breaks using all possible pairs of real exchange rates. To deal with cross-sectional dependence, we use both cross-sectional demeaned data and a parametric bootstrap approach. In general, we find more evidence for stationarity when the parity restriction is not imposed, while imposing parity restriction provides leads toward the rejection of the panel stationar- ity. Our results can be embedded on the view of the Balassa-Samuelson approach, but where the slope of the time trend is allowed to change in the long-run. The median half-life point estimate are found to be lower than the consensus view regardless of the parity restriction.

Structural decomposition analysis and input-output subsystems: An application to Spanish CO2 emissions

Analysis of gas emissions by the input-output subsystem approach provides detailed insight into pollution generation in an economy. Structural decomposition analysis, on the other hand, identifies the factors behind the changes in key variables over time. Extending the input-output subsystem model to account for the changes in these variables reveals the channels by which environmental burdens are caused and transmitted throughout the production system. In this paper we propose a decomposition of the changes in the components of CO2 emissions captured by an input-output subsystems representation. The empirical application is for the Spanish service sector, and the economic and environmental data are for years 1990 and 2000. Our results show that services increased their CO2 emissions mainly because of a rise in emissions generated by non-services to cover the final demand for services. In all service activities, the decomposed effects show an increase in CO2 emissions due to a decrease in emission coefficients (i.e., emissions per unit of output) compensated by an increase in emissions caused both by the input-output coefficients and the rise in demand for services. Finally, large asymmetries exist not only in the quantitative changes in the CO2 emissions of the various services but also in the decomposed effects of these changes. Keywords: structural decomposition analysis, input-output subsystems, CO2 emissions, service sector.

Macroeconomic shocks and the business cycle: evidence from a structural factor model

We use a dynamic factor model to provide a semi-structural representation for 101 quarterly US macroeconomic series. We find that (i) the US economy is well described by a number of structural shocks between two and six. Focusing on the four-shock specification, we identify, using sign restrictions, two non-policy shocks, demand and supply, and two policy shocks, monetary and fiscal. We obtain the following results. (ii) Both supply and demand shocks are important sources of fluctuations; supply prevails for GDP, while demand prevails for employment and inflation. (ii) Policy matters, Both monetary and fiscal policy shocks have sizeable effects on output and prices, with little evidence of crowding out; both monetary and fiscal authorities implement important systematic countercyclical policies reacting to demand shocks. (iii) Negative demand shocks have a large long-run positive effect on productivity, consistently with the Schumpeterian "cleansing" view of recessions.

Testing for sufficient information in structural VARs

We derive necessary and sufficient conditions under which a set of variables is informationally sufficient, i.e. it contains enough information to estimate the structural shocks with a VAR model. Based on such conditions, we suggest a procedure to test for informational sufficiency. Moreover, we show how to amend the VAR if informational sufficiency is rejected. We apply our procedure to a VAR including TFP, unemployment and per-capita hours worked. We find that the three variables are not informationally sufficient. When adding missing information, the effects of technology shocks change dramatically.

Intermediary and structural determinants of early childhood health in Colombia: exploring the role of communities

This study examines how structural determinants influence intermediary factors of child health inequities and how they operate through the communities where children live. In particular, we explore individual, family and community level characteristics associated with a composite indicator that quantitatively measures intermediary determinants of early childhood health in Colombia. We use data from the 2010 Colombian Demographic and Health Survey (DHS). Adopting the conceptual framework of the Commission on Social Determinants of Health (CSDH), three dimensions related to child health are represented in the index: behavioural factors, psychosocial factors and health system. In order to generate the weight of the variables and take into account the discrete nature of the data, principal component analysis (PCA) using polychoric correlations are employed in the index construction. Weighted multilevel models are used to examine community effects. The results show that the effect of household’s SES is attenuated when community characteristics are included, indicating the importance that the level of community development may have in mediating individual and family characteristics. The findings indicate that there is a significant variance in intermediary determinants of child health between-community, especially for those determinants linked to the health system, even after controlling for individual, family and community characteristics. These results likely reflect that whilst the community context can exert a greater influence on intermediary factors linked directly to health, in the case of psychosocial factors and the parent’s behaviours, the family context can be more important. This underlines the importance of distinguishing between community and family intervention programmes.

Predicting random level and seasonality of hotel prices. A structural equation growth curve approach

This article examines the effect on price of different characteristics of holiday hotels in the sun-and-beach segment, under the hedonic function perspective. Monthly prices of the majority of hotels in the Spanish continental Mediterranean coast are gathered from May to October 1999 from the tour operator catalogues. Hedonic functions are specified as random-effect models and parametrized as structural equation models with two latent variables, a random peak season price and a random width of seasonal fluctuations. Characteristics of the hotel and the region where they are located are used as predictors of both latent variables. Besides hotel category, region, distance to the beach, availability of parking place and room equipment have an effect on peak price and also on seasonality. 3- star hotels have the highest seasonality and hotels located in the southern regions the lowest, which could be explained by a warmer climate in autumn

Modelling structural zeros in compositional data

This analysis was stimulated by the real data analysis problem of householdexpenditure data. The full dataset contains expenditure data for a sample of 1224 households. The expenditure is broken down at 2 hierarchical levels: 9 major levels (e.g. housing, food, utilities etc.) and 92 minor levels. There are also 5 factors and 5 covariates at the household level. Not surprisingly, there are a small number of zeros at the major level, but many zeros at the minor level. The question is how best to model the zeros. Clearly, models that tryto add a small amount to the zero terms are not appropriate in general as at least some of the zeros are clearly structural, e.g. alcohol/tobacco for households that are teetotal. The key question then is how to build suitable conditional models. For example, is the sub-composition of spendingexcluding alcohol/tobacco similar for teetotal and non-teetotal households?In other words, we are looking for sub-compositional independence. Also, what determines whether a household is teetotal? Can we assume that it is independent of the composition? In general, whether teetotal will clearly depend on the household level variables, so we need to be able to model this dependence. The other tricky question is that with zeros on more than onecomponent, we need to be able to model dependence and independence of zeros on the different components. Lastly, while some zeros are structural, others may not be, for example, for expenditure on durables, it may be chance as to whether a particular household spends money on durableswithin the sample period. This would clearly be distinguishable if we had longitudinal data, but may still be distinguishable by looking at the distribution, on the assumption that random zeros will usually be for situations where any non-zero expenditure is not small.While this analysis is based on around economic data, the ideas carry over tomany other situations, including geological data, where minerals may be missing for structural reasons (similar to alcohol), or missing because they occur only in random regions which may be missed in a sample (similar to the durables)