38 resultados para Stone carvers
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
Currently, acoustic isolation is one of the problems raised with building construction in Spain. The publication of the Basic Document for the protection against noise of the Technical Building Code has increased the demand of comfort for citizens. This has created the need to seek new composite materials that meet the new required acoustical building codes. In this paper we report the results of the newly developed composites that are able to improve the acoustic isolation of airborne noise. These composites were prepared from polypropylene (PP) reinforced with mechanical pulp fibers from softwood (Pinus radiata). Mechanical and acoustical properties of the composites from mechanical pulp (MP) and polypropylene (PP) have been investigated and compared to fiberglass (FG) composites. MP composites had lower tensile properties compared with FG composites, although these properties can be improved by incorporation of a coupling agent. The results of acoustical properties of MP composites were reported and compared with the conventional composites based on fiberglass and gypsum plasterboards. Finally, we suggest the application of MP composites as a light-weight building material to reduce acoustic transmitions
Resumo:
Stone groundwood (SGW) is a fibrous matter commonly prepared in a high yield process, and mainly used for papermaking applications. In this work, the use of SGW fibers is explored as reinforcing element of polypropylene (PP) composites. Due to its chemical and superficial features, the use of coupling agents is needed for a good adhesion and stress transfer across the fiber-matrix interface. The intrinsic strength of the reinforcement is a key parameter to predict the mechanical properties of the composite and to perform an interface analysis. The main objective of the present work was the determination of the intrinsic tensile strength of stone groundwood fibers. Coupled and non-coupled PP composites from stone groundwood fibers were prepared. The influence of the surface morphology and the quality at interface on the final properties of the composite was analyzed and compared to that of fiberglass PP composites. The intrinsic tensile properties of stone groundwood fibers, as well as the fiber orientation factor and the interfacial shear strength of the current composites were determined
Resumo:
Two of the drawbacks of using natural-based composites in industrial applications are thermal instability and water uptake capacity. In this work, mechanical wood pulp was used to reinforce polypropylene at a level of 20 to 50 wt. %. Composites were mixed by means of a Brabender internal mixer for both non-coupled and coupled formulations. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to determine the thermal properties of the composites. The water uptake behavior was evaluated by immersion of the composites in water until an equilibrium state was reached. Results of water absorption tests revealed that the amount of water absorption was clearly dependent upon the fiber content. The coupled composites showed lower water absorption compared to the uncoupled composites. The incorporation of mechanical wood pulp into the polypropylene matrix produced a clear nucleating effect by increasing the crystallinity degree of the polymer and also increasing the temperature of polymer degradation. The maximum degradation temperature for stone ground wood pulp–reinforced composites was in the range of 330 to 345 ºC
Resumo:
The behavior of stone groundwood / polypropylene injection-molded composites was evaluated with and without coupling agent. Stone groundwood (SGW) is a fibrous material commonly prepared in a high yield process and mainly used for papermaking applications. In this work, the use of SGW fibers was explored as a reinforcing element of polypropylene (PP) composites. The surface charge density of the composite components was evaluated, as well as the fiber’s length and diameter inside the composite material. Two mixing extrusion processes were evaluated, and the use of a kinetic mixer, instead of an internal mixer, resulted in longer mean fiber lengths of the reinforcing fibers. On the other hand, the accessibility of surface hydroxyl groups of stone groundwood fibers was improved by treating the fibers with 5% of sodium hydroxide, resulting in a noticeable increase of the tensile strength of the composites, for a similar percentage of coupling agent. A new parameter called Fiber Tensile Strength Factor is defined and used as a baseline for the comparison of the properties of the different composite materials. Finally the competitiveness of stone groundwood / polypropylene / polypropylene-co-maleic anhydride system, which compared favorably to sized glass-fiber / polypropylene GF/PP and glass-fiber / polypropylene / polypropylene-co-maleic anhydride composite formulations, was quantified by means of the fiber tensile strength factor
Resumo:
Aquest és el llibre més complet que hi ha sobre la pedra de Santa Tecla i el llisós, dos materials procedents de Tarragona i molt utilitzats en època romana. Els autors, arqueòlegs i geòlegs, caracteritzen aquestes dues varietats i presenten el panorama de les seves aplicacions, i també donen pautes per identificar-les i diferenciar-les d’altres pedres que s’hi podrien confondre, com la “portasanta” o la pedra de Buixcarró.
Resumo:
Aquesta obra recull els resums de les comunicacions orals i pòsters que es van presentar durant el IX Congrés Internacional de l’Association for the Study of Marbles and Other Stones in Antiquity (ASMOSIA), organitzat per l’ICAC en el marc del programa de recerca HAR2008-04600/HIST, amb el suport del programa d’Ajuts ARCS 2008 (referència expedient IR036826) de la Generalitat de Catalunya i del Ministeri de Ciència i Innovació (Accions Complementàries HAR2008-03181-E/HIST), i celebrat a Tarragona entre el 8 i el 13 de juny del 2009.
Resumo:
One of the most relevant properties of composite materials to be considered is stiffness. Fiberglass has been used traditionally as a fibrous reinforcing element when stiff materials are required. However, natural fibers are been exploited as replacements for synthetic fibers to satisfy environmental concerns. Among the different natural fibers, wood fibers show the combination of relatively high aspect ratio, good specific stiffness and strength, low density, low cost, and less variability than other natural fibers of such those from annual crops. In this work, composites from polypropylene and stone groundwood fibers from softwood were prepared and mechanically characterized under tensile loads. The Young’s moduli of the ensuing composites were analyzed and their micromechanics aspects evaluated. The reinforcing effect of stone groundwood fibers was compared to that of conventional reinforcement such fiberglass. The Halpin-Tsai model with the modification proposed by Tsai-Pagano accounted fairly for the behavior of PP composites reinforced with stone groundwood fibers. It was also demonstrated that the aspect ratio of the reinforcement plays a role in the Young’s modulus of injection molded specimens
Resumo:
This paper deals with the product design, engineering, and material selection intended for the manufacturing of an eco-friendly chair. The final product is expected to combine design attributes with technical and legal feasibility with the implementation of new bio-based materials. Considering the industrial design, a range of objectives and trends were determined after setting the market requirements, and the final concept was proposed and modeled. The product geometry, production technology, and legal specifications were the input data for product engineering. The material selection was based on the technical requirements. Polypropylene (PP) composite materials based on coupled-fiberglass, sized-fiberglass, and coupled-stone ground wood reinforcements were prepared and characterized. Final formulations based on these PP composites are proposed and justified
Resumo:
Aquest projecte ha estat desenvolupat entre l’octubre de 2008 i el juliol de 2009 per un equip d’estudiants de Ciències Ambientals de la Universitat Autònoma de Barcelona. L’objecte d’estudi principal han estat les bordes, construccions agroramaderes utilitzades tradicionalment per a emmagatzemar l’herba i estabular-hi el bestiar. D’altra banda, pel que fa la biodiversitat, s’ha realitzat un estudi de la vegetació de pedra seca, i una primera aproximació a l’estudi dels rat-penats, espècies protegides que utilitzen les bordes com a refugi. L’àmbit d’estudi ha estat la Vall d'Estaon dins el municipi de Vall de Cardós, a la comarca del Pallars Sobirà, Catalunya. Tota la superfície d’estudi es troba dins de l’àmbit del Parc Natural de l’Alt Pirineu (PNAP) i, per tant, sota la seva protecció. Per a la realització d’aquest estudi, s’ha utilitzat la metodologia emprada en el projecte del Bosc de Virós (Mestres et al.,2007). S’elabora un inventari de bordes i un altre de biodiversitat a partir de les dades recopilades amb la observació al camp i es realitzen entrevistes als gestors de la zona, antics i nous propietaris. En l’anàlisi dels resultats, s’observa que les bordes han perdut la seva funcionalitat tradicional i moltes d’elles s’han abandonat. Aquests fets provoquen la degradació d’aquestes construccions i la conseqüent pèrdua de patrimoni. D’altra banda la idea de recuperar les activitats tradicionals esdevé poc realista i es combina amb la impossibilitat d’aplicar nous usos per la protecció que exerceix la figura de Parc Natural. Així doncs, les bordes es troben enmig d’una situació estàtica i paradoxal entre la voluntat i desig de conservació i l'imminent i accelerat procés d’abandonament i degradació.
Resumo:
An abundant scientific literature about climate change economics points out that the future participation of developing countries in international environmental policies will depend on their amount of pay offs inside and outside specific agreements. These studies are aimed at analyzing coalitions stability typically through a game theoretical approach. Though these contributions represent a corner stone in the research field investigating future plausible international coalitions and the reasons behind the difficulties incurred over time to implement emissions stabilizing actions, they cannot disentangle satisfactorily the role that equality play in inducing poor regions to tackle global warming. If we focus on the Stern Review findings stressing that climate change will generate heavy damages and policy actions will be costly in a finite time horizon, we understand why there is a great incentive to free ride in order to exploit benefits from emissions reduction efforts of others. The reluctance of poor countries in joining international agreements is mainly supported by historical responsibility of rich regions in generating atmospheric carbon concentration, whereas rich countries claim that emissions stabilizing policies will be effective only when developing countries will join them.Scholars recently outline that a perceived fairness in the distribution of emissions would facilitate a wide spread participation in international agreements. In this paper we overview the literature about distributional aspects of emissions by focusing on those contributions investigating past trends of emissions distribution through empirical data and future trajectories through simulations obtained by integrated assessment models. We will explain methodologies used to elaborate data and the link between real data and those coming from simulations. Results from this strand of research will be interpreted in order to discuss future negotiations for post Kyoto agreements that will be the focus of the next. Conference of the Parties in Copenhagen at the end of 2009. A particular attention will be devoted to the role that technological change will play in affecting the distribution of emissions over time and to how spillovers and experience diffusion could influence equality issues and future outcomes of policy negotiations.
Resumo:
En aquest projecte hem seguit desenvolupant i ampliant els continguts d’una assignatura de caràcter transversal entre Geologia i Arqueologia Prehistòrica aplicada als estudis universitaris. Aquesta ampliació s’ha dut a terme amb la creació d'un recull de fitxes amb les dades més rellevants d’alguns sepulcres megalítics de Catalunya fent especial esment als materials petris utilitzats en la seva construcció de per tal de poder desenvolupar i contextualitzar els resultats que s’assoleixin durant el curs. Cadascuna de les fitxes inclou per cada megàlit: 1) una situació geogràfica, 2) una part de descripció des del punt de vista arqueològic i 3) una part geològica amb la situació, descripció dels elements petris de les lloses tant a visu com al microscopi petrogràfic i una localització probable de l’àrea de procedència de les lloses. Això suposa un aprofundiment i ampliació de l'oferta pedagògica proposada que permet experimentar una metodologia d’ensenyament universitari més pràctica, aplicada i interactiva i s’emmarca en l’eix temàtic al voltant del qual es desenvolupa l’assignatura.
Resumo:
S’ha elaborat una anàlisi del sistema agroecològic del municipi de Vila-seca (Tarragonès) per tal de realitzar en segon lloc, una proposta de guia per a la descoberta del medi per a infants d’entre 8 i 10 anys. A partir del treball de camp realitzat a la zona d’estudi s’han inventariat diferents elements del patrimoni socioecològic que es consideren de rellevada importància al terme. Entre ells destaquen oliveres, garrofers, avellaners, arbres singulars, masos, basses, marges de pedra seca i trones, els quals s’integren en el medi formant un veritable sistema agroecològic, fruit de la interacció entre vectors biofísics i socioeconòmics. D’altra banda, per tal de donar a conèixer aquest sistema s’ha realitzat una proposta de descoberta del medi agrícola a partir d’un itinerari d’educació ambiental per la zona estudiada, on s’engloben tots aquells elements d’especial interès en un recorregut de 2,9 quilòmetres. La guia disposa a més d’una sèrie d’activitats a realitzar a l’entorn per tal de motivar el sentiment de descoberta d’aquest sistema. D’aquesta manera, considerant les fortes pressions que aquest territori pateix per part de les infraestructures i les urbanitzacions és destriable la necessitat de conservació i l’addició dels elements inventariats al catàleg del Patrimoni del municipi.
Resumo:
La patologia litiàsica urinaria infantil afecta a un 5 –10% d’aquesta població. El tractament de la litiasi en edat infantil inclou desde tractament mínimament invasiu com la litotrípsia extracorpòria per ones de xoc (LEOX) a tractament quirúrgic (endourològic o obert). Es va realitzar un estudi retrospectiu amb un total de 82 pacients en edat pediàtrica amb patologia litiàsica tractada mitjançant litotrípsia per ones de xoc. Es van analitzar de forma descriptiva els resultats sobre aquest grup de pacients. Dels 82 pacients estudiats, el 54% van ser nens i el 46% nenes, amb una edat mitjana de 8.6 anys. Es va analitzar la resposta a litotrípsia segons tamany i grups d’edat per estrats observant que no hi havia diferències significatives respecte al número de sessions necessàries por grups d’edat però amb tendència a la significació en el grup de menor edat (de 0 a 3 anys). Tanmateix, aquest grup de pacients presentaven comparativamente litiasi de major tamany que el grup de més edat (de 16 a 20 anys). Les complicacions es van presentar en només 10 pacients (8%) considerant com a tals la presència de fragments obstructius, dolor lumbar o carrer litiàsic. Després d’analitzar els resultats es pot concloure que la litotrícia per ones de xoc constitueix un tractament eficaç pel tractament de la litiasi independentment de la seva localització, no trobant diferències per grups d’edat i aconseguint bones tases de “stone free” inclús per litiasi coraliformes en pacients en edat infantil i amb escasses complicacions.