Modelling of non-linear viscoelastic tissues with bar elements

In this work we develop a viscoelastic bar element that can handle multiple rheo- logical laws with non-linear elastic and non-linear viscous material models. The bar element is built by joining in series an elastic and viscous bar, constraining the middle node position to the bar axis with a reduction method, and stati- cally condensing the internal degrees of freedom. We apply the methodology to the modelling of reversible softening with sti ness recovery both in 2D and 3D, a phenomenology also experimentally observed during stretching cycles on epithelial lung cell monolayers.

Friction Stir Processing : a new microstructure improvement technique

In the present work, microstructure improvement using FSP (Friction Stir Processing) is studied. In the first part of the work, the microstructure improvement of as-cast A356 is demonstrated. Some tensile tests were applied to check the increase in ductility. However, the expected results couldn’t be achieved. In the second part, the microstructure improvement of a fusion weld in 1050 aluminium alloy is presented. Hardness tests were carried out to prove the mechanical propertyimprovements. In the third and last part, the microstructure improvement of 1050 aluminium alloy is achieved. A discussion of the mechanical property improvements induced by FSP is made. The influence of tool traverse speed on microstructure and mechanical properties is also discussed. Hardness tests and recrystallization theory enabled us to find out such influence

Precision determination of r(0)Lambda((MS)over-bar) from the QCD static energy

We use the recently obtained theoretical expression for the complete QCD static energy at next-to-next-to-next-to leading-logarithmic accuracy to determine r(0)Lambda((MS) over bar) by comparison with available lattice data, where r(0) is the lattice scale and Lambda((MS) over bar) is the QCD scale. We obtain r(0)Lambda((MS) over bar) = 0.622(-0.015)(+0.019) for the zero-flavor case. The procedure we describe can be directly used to obtain r(0)Lambda((MS) over bar) in the unquenched case, when unquenched lattice data for the static energy at short distances becomes available. Using the value of the strong coupling alpha(s) as an input, the unquenched result would provide a determination of the lattice scale r(0).

(K)over-bar* mesons in dense matter

We study the properties of (K) over bar* mesons in nuclear matter using a unitary approach in coupled channels within the framework of the local hidden gauge formalism and incorporating the (K) over bar pi decay channel in matter. The in-medium (K) over bar *N interaction accounts for Pauli blocking effects and incorporates the (K) over bar* self-energy in a self-consistent manner. We also obtain the (K) over bar* (off-shell) spectral function and analyze its behavior at finite density and momentum. At a normal nuclear matter density, the (K) over bar* meson feels a moderately attractive potential, while the (K) over bar* width becomes five times larger than in free space. We estimate the transparency ratio of the gamma A -> K+K*(-) A` reaction, which we propose as a feasible scenario at the present facilities to detect changes in the properties of the (K) over bar* meson in nuclear medium.

Some spectral properties of the canonical solution operator to $\bar\partial$ on weighted Fock spaces

We characterize the Schatten class membership of the canonical solution operator to $\overline{\partial}$ acting on $L^2(e^{-2\phi})$, where $\phi$ is a subharmonic function with $\Delta\phi$ a doubling measure. The obtained characterization is in terms of $\Delta\phi$. As part of our approach, we study Hankel operators with anti-analytic symbols acting on the corresponding Fock space of entire functions in $L^2(e^{-2\phi})$

Gurt Esparraguera, J. M., Buxeda i Garrigòs M. i Cau Ontiveros, M. A (eds.), LRCW 1 Late Roman Coarte Wares, Cocking Wares and Amphorae in the Mediterranean, Archaeology and Archaeometry BAR 1340

No es exagerado afirmar que, en las últimas décadas, los estudios dedicados a la cultura material de la antigüedad tardía y, en particular, a sus producciones cerámicas, han experimentado un desarrollo acelerado. Este fenómeno se ha traducido en una auténtica explosión de títulos que, con diversa extensión y profundidad, abarcan todas las posibilidades de análisis: desde las monografías de excavación, en las que se describen los repertorios asociados a las formas de vida y trabajo de un asentamiento, hasta las síntesis regionales que abordan cuestiones relacionadas con los mecanismos económicos, culturales y políticos que impulsaron la creación de unos circuitos de intercambio de alcance mediterráneo.

Cau Oliveros, Miguel Angel: Cerámica tardorromana de cocina de las Islas Baleares, estudio arqueométrico, BAR International Series 1182, 2003.

La sensació que un té quan acaba de llegir el llibre Cerámica tardorromana de cocina de las Islas Baleares. Estudio arqueométrico, de Miguel Angel Cau Ontiveros, és la d'haver llegit diversos libres en un de sol. No sé si hi ha intencionalitat en aquest fet o simplement és fruit d'una preocupa ció més amplia que l'estrictament proposada pel títol de l'obra. Per una part, el propi estudi arqueometric, on les referencies arqueologiques es prenen d'estudis previs fets per altres autors, a excepció deljaciment de Sa Mesquida (Calvia, Mallorca), amb una finalitat clarament historica, la caracterització d'una serie de ceramiques, totes atribuIble s a l'ambit de la cuina en una epoca concreta, per tal de poder determinar basicament el grau d'autosuficiencia d'uns espais insulars.

A Reply to comments by D. Bar-Yosef M. Stiner on "Prehistoric exploitation of marine resources in Southern Africa with particular reference to shellfish gathering: opportunities and continuities"

I am very grateful to Daniella E. Bar-Yosef Mayer and Mary Stiner for their comments on an article I published in the previous issue of Pyrenae. Having spent many years working with coastal sites in South Africa and now settling in the Mediterranean academic landscape, I value the feedback from these two well-known archaeologists who have dedicated years of hard work in this later part of the world. Their opinions are very much appreciated for they allow me to bring new contexts to some of the (old) questions I have pursued in South Africa, an exercise that would help me with the process of broadening my research interests to the Mediterranean region.

Self-organization mechanisms for the formation on nearshore crescentic and transverse sand bars

The formation and development of transverse and crescentic sand bars in the coastal marine environment has been investigated by means of a nonlinear numerical model based on the shallow-water equations and on a simpli ed sediment transport parameterization. By assuming normally approaching waves and a saturated surf zone, rhythmic patterns develop from a planar slope where random perturbations of small amplitude have been superimposed. Two types of bedforms appear: one is a crescentic bar pattern centred around the breakpoint and the other, herein modelled for the rst time, is a transverse bar pattern. The feedback mechanism related to the formation and development of the patterns can be explained by coupling the water and sediment conservation equations. Basically, the waves stir up the sediment and keep it in suspension with a certain cross-shore distribution of depth-averaged concentration. Then, a current flowing with (against) the gradient of sediment concentration produces erosion (deposition). It is shown that inside the surf zone, these currents may occur due to the wave refraction and to the redistribution of wave breaking produced by the growing bedforms. Numerical simulations have been performed in order to understand the sensitivity of the pattern formation to the parameterization and to relate the hydro-morphodynamic input conditions to which of the patterns develops. It is suggested that crescentic bar growth would be favoured by high-energy conditions and ne sediment while transverse bars would grow for milder waves and coarser sediment. In intermediate conditions mixed patterns may occur.

All-sky search algorithms for monochromatic signals in bar gravitational wave detector data

In this paper we design and develop several filtering strategies for the analysis of data generated by a resonant bar gravitational wave (GW) antenna, with the goal of assessing the presence (or absence) therein of long-duration monochromatic GW signals, as well as the eventual amplitude and frequency of the signals, within the sensitivity band of the detector. Such signals are most likely generated in the fast rotation of slightly asymmetric spinning stars. We develop practical procedures, together with a study of their statistical properties, which will provide us with useful information on the performance of each technique. The selection of candidate events will then be established according to threshold-crossing probabilities, based on the Neyman-Pearson criterion. In particular, it will be shown that our approach, based on phase estimation, presents a better signal-to-noise ratio than does pure spectral analysis, the most common approach.

Síntesi i caracterització de nanopartícules d'òxid de cobalt

L’objectiu d’aquest projecte és sintetitzar i caracteritzar nanopartícules d’òxid de cobalt. Ens interessa estudiar diferents isomorfes de monòxid de cobalt (CoO) ja que són materials nous i se’n desconeixen les propietats; en algunes investigacions s’intueix un comportament antiferromagnètic la qual cosa les fa especialment interessants per aplicacions magnètiques.

Estudio y preparación de barbotinas de cerámicas técnicas avanzadas oxídicas mediante el molino de atrición

Las cerámicas técnicas se han identificado como uno de los primeros campos donde las mayores mejoras en el procesado y la obtención de productos más avanzados se podrán alcanzar. Avances en la tecnología del procesado cerámico se requerirán para la comercialización de nuevos productos y para el mantenimiento de la competitividad en los productos ya consolidados. El molino de atrición es capaz de suministrar alta energía en el proceso de molienda consiguiendo mayores reducciones de tamaño de partícula. El procesado con el molino de atrición permite conseguir partículas submicrónicas que facilitan las etapas de conformado posterior y mejoran las propiedades del producto final. Esta alta eficiencia del molino de atrición hace que se puedan conseguir partículas en el rango incluso manométrico lo que tiene interesantes implicaciones tecnológicas. El objetivo principal de este trabajo es el estudio de los parámetros que afectan a la desaglomeración y molturación del material de partida, más una caracterización de la microestructura y de las propiedades mecánicas que genera en el material desarrollado.

Caracterización y comparación de las propiedades mecánicas de dos chapas de acero avanzado de alta resistencia (AHSS): TRIP800 y DP800

En el presente trabajo, se lleva a cabo un estudio sobre las propiedades mecánicas de chapa de dos aceros avanzado de alta resistencia. La búsqueda de un modelo teórico que defina su comportamiento en régimen plástico, así como la comparativa de sus resultados con el fin de predecir su comportamiento en etapas de conformado, y ayudar a optimizar los resultados en simulación mediante elementos finitos. También se añade un ejemplo de simulación para ver la importancia de la precisión del cálculo de las propiedades mecánicas en este campo.

Study of the influence of grain size and precipitates on the electromagnetic losses in different grades of non-oriented fully processed electrical steel

The study was performed in the installations of OCAS, a Steel Research Centre of ArcelorMittal. Taking M32 steel (3.25%Si+0.9%Al) as the basis chemical composition and three different thicknesses (0.35, 0.5 and 0.65mm), different annealing conditions (temperature and time) have been applied in the laboratory simulator at St. Chély, France. The aim was to link annealing parameters, grain size and energy loss. It was determined the optimum annealing parameters to reach the lowest power losses for three different grades of non-oriented fully processed electrical steel. In addition, M250-50 samples having different magnetic behaviour (high and low losses) but the same grain size and texture, have been analyzed in terms of TEM observations of their precipitates, in the University of Marseille. The results reveal that a high amount of medium and big precipitates (&10 nm) worsen the magnetic properties of the material. The small precipitates (&10nm) do not have a strong influence on the magnetic properties. The presence of precipitates can have a great influence on the power losses and further work is clearly necessary.