Uso de TiO2 dopado con nitrógeno para la generación de hidrógeno bajo irradiación con luz visible

Se desarrollaron catalizadores de TiO2 dopados con nitrógeno para conseguir actividad fotocatalítica bajo irradiación visible. En este trabajo se reporta la síntesis de TiO2-N, usando urea y nitrato de amonio (NH4NO3) como precursores de nitrógeno, tanto a partir de un TiO2 generado in situ (método sol-gel) como mediante la modificación de un TiO2 comercial. Así mismo, se varió la concentración de urea para encontrar el valor óptimo de nitrógeno, lo cual se comprobó mediante la oxidación fotocatalítica de ácido oxálico bajo irradiación con luz visible. Los materiales sintetizados se caracterizaron por medio de análisis elemental, y por reflectancia difusa UV-visible, encontrándose nitrógeno en todas las muestras, y un valor del ancho de banda prohibida en el rango 2-2,8 eV. Lamentablemente, se detectó una pérdida de nitrógeno cuando los fotocatalizadores eran reutilizados, lo cual causó una disminución de su actividad después de cada reacción, ya sea en presencia de oxígeno, o en ausencia de éste mientras se generaba hidrógeno. Entre los dopantes investigados el NH4NO3 mostro una mejor eficiencia en la producción de hidrógeno. Además, los resultados experimentales revelaron claramente que la deposición de platino en la superficie de los catalizadores TiO2-N desempeña un papel fundamental en el aumento de la generación de hidrógeno. Sin embargo, esta mejora dependía claramente del método de preparación de las muestras, obteniéndose mejores resultados con el TiO2-p25.

Exploring chromium (VI) dioxodihalides chemistry: is density functional theory the most suitable tool?

A comparative systematic study of the CrO2F2 compound has been performed using different conventional ab initio methodologies and density functional procedures. Two points have been analyzed: first, the accuracy of results yielded by each method under study, and second, the computational cost required to reach such results. Weighing up both aspects, density functional theory has been found to be more appropriate than the Hartree-Fock (HF) and the analyzed post-HF methods. Hence, the structural characterization and spectroscopic elucidation of the full CrO2X2 series (X=F,Cl,Br,I) has been done at this level of theory. Emphasis has been given to the unknown CrO2I2 species, and specially to the UV/visible spectra of all four compounds. Furthermore, a topological analysis in terms of charge density distributions has revealed why the valence shell electron pair repulsion model fails in predicting the molecular shape of such CrO2X2 complexes

Progress in a-Si:H/c-Si heterojunction emitters obtained by Hot-Wire CVD at 200°C

In this work, we investigate heterojunction emitters deposited by Hot-Wire CVD on p-type crystalline silicon. The emitter structure consists of an n-doped film (20 nm) combined with a thin intrinsic hydrogenated amorphous silicon buffer layer (5 nm). The microstructure of these films has been studied by spectroscopic ellipsometry in the UV-visible range. These measurements reveal that the microstructure of the n-doped film is strongly influenced by the amorphous silicon buffer. The Quasy-Steady-State Photoconductance (QSS-PC) technique allows us to estimate implicit open-circuit voltages near 700 mV for heterojunction emitters on p-type (0.8 Ω·cm) FZ silicon wafers. Finally, 1 cm 2 heterojunction solar cells with 15.4% conversion efficiencies (total area) have been fabricated on flat p-type (14 Ω·cm) CZ silicon wafers with aluminum back-surface-field contact.

Síntesis, caracterización y ensayos cinéticos del nanocomposite RuO2/TiO2/MWCNT/Pt en la producción fotocatalítica de combustibles solares bajo iluminación UV y VIS

Se prepararon partículas de nanocomposites basados en TiO2 y nanotubos de carbono multicapa platinizados para la obtención de combustibles solares. Se evaluó la actividad fotocatalítica del material en la producción de hidrógeno, en procesos de degradación de ácido fórmico, y en la obtención de hidrocarburos a partir de la reducción de CO2 en agua. Los nanocomposites fueron sintetizados por medio de la técnica sol-gel. Se estudió el efecto de la proporción y el diámetro de los nanotubos de carbono en la actividad del material bajo iluminación ultravioleta y visible. Se estudió el efecto de la adición de RuO2 (0,5% wt.) en la actividad bajo iluminación visible. Los materiales fueron caracterizados por ATR, XRD, BET, HRTEM y SEM. Se obtuvieron sólidos macroporosos, con contenido de fase anatasa superior al 99% y tamaño cristalino comprendido entre 15 y 21 nm. Los resultados cinéticos mostraron una producción óptima de hidrógeno para el composite TiO2/(5wt.%)MWCNT/Pt(60-80 nm), con eficiencia cuántica y eficiencia energética de 1,27% y 0,27%, respectivamente. En el caso de radiación visible, la producción de hidrógeno fue nula para los composites TiO2/MWCNT/Pt, mientras que para el sistema RuO2/TiO2/MWCNT/Pt se observó que la adicción de MWCNT inhibía la actividad fotocatalítica del composite RuO2/TiO2 en la región del visible. Por otra parte, en los ensayos de reducción de CO2 no se detectó ningún producto de reacción.

How collaboration could contribute to make Catalan journals visible on the Internet?

Cooperation between libraries is a universal language spoken in different dialects. In 1996 the libraries of the state-funded universities and the National Library of Catalonia (Spain) formed the Consortium of Academic Libraries of Catalonia (CBUC) to act as a channel for cooperation. The organization and activities of CBUC are an example of how this universal language has been adapted to the specific characteristics of the Libraries of Catalonia. Catalonia is an autonomous region of Spain with 7 million inhabitants with its own language, history and traditions and with a strong feeling of own identity that facilitates the cooperation. Thanks to this (and also to the hard work of the member libraries), since then, CBUC has created a union catalogue, an interlibrary lending program, the Digital Library of Catalonia, a cooperative store, different cooperatives repositories and other cooperation programs. One of these cooperatives repositories is RACO (Catalan Journals in Open Access, www.raco.cat) where can be consulted, in open access, the full-text articles of scientific, cultural and scholar Catalan journals. The main purpose of RACO is to increase the visibility and searches of the journals included and to spread the scientific and academic production published in Catalonia. This purpose makes specific in three aims: encourage the electronic edition of Catalan journals; be the interface that allows the whole search of all the journals and provide the instruments for its preservation. There are currently 244 journals in RACO, that includes more than 85.000 articles (80% in OA) from 50 publishing institutions. Since it got into operation it has had more than 4 millions of queries. These 244 journals offer the full-text of all the published issues. Nevertheless, some journal can have a delay between the introduction of the table of contents and the full-text for the recent issues. From 2005 we have a plan of retrospective digitization that has allowed to digitize more than 350.000 pages of back issues. The RACO repository works with the open source program OJS (Open Journal Systems, http://pkp.sfu.ca/ojs/) and uses Dublin Core Metadata and the interoperability protocol created by Open Archives Initiative (OAI) which allows to increase the visibility of the articles published in journals offering oneself together with other international repositories.

Educació visible, eficient i d'èxit. L'escola intel•ligent

La creació de sistemes educatius competencials, que responen a polítiques estratègiques i a la necessitat de crear un segell propi i comú amb una clara visió de futur de compromís i de qualitat, afavoreix la construcció, promoció i consolidació de centres educatius excel·lents i intel·ligents, on els conceptes de millora contínua, qualitat, diversitat i eficiència es troben institucionalitzats i afavoreixen un més alt grau de satisfacció a tota la comunitat educativa

Towards closure between measured and modelled UV under clear skies at four diverse sites

The purpose of this work is determine the extent of closure between measurements and models of UV irradiances at diverse sites using state of the art instruments, models, and the best available data as inputs to the models. These include information about aerosol optical depth (unfortunately not extending down as far into the UVB region as desirable because such information is not generally available), ozone column amounts, as well as vertical profiles of temperature. We concentrate on clear-sky irradiances, and report the results in terms of UV Index (UVI)

Using a Parameterization of a Radiative Transfer Model to Build High-Resolution Maps of Typical Clear-Sky UV Index in Catalonia, Spain

To perform a climatic analysis of the annual UV index (UVI) variations in Catalonia, Spain (northeast of the Iberian Peninsula), a new simple parameterization scheme is presented based on a multilayer radiative transfer model. The parameterization performs fast UVI calculations for a wide range of cloudless and snow-free situations and can be applied anywhere. The following parameters are considered: solar zenith angle, total ozone column, altitude, aerosol optical depth, and single-scattering albedo. A sensitivity analysis is presented to justify this choice with special attention to aerosol information. Comparisons with the base model show good agreement, most of all for the most common cases, giving an absolute error within 0.2 in the UVI for a wide range of cases considered. Two tests are done to show the performance of the parameterization against UVI measurements. One uses data from a high-quality spectroradiometer from Lauder, New Zealand [45.04°S, 169.684°E, 370 m above mean sea level (MSL)], where there is a low presence of aerosols. The other uses data from a Robertson–Berger-type meter from Girona, Spain (41.97°N, 2.82°E, 100 m MSL), where there is more aerosol load and where it has been possible to study the effect of aerosol information on the model versus measurement comparison. The parameterization is applied to a climatic analysis of the annual UVI variation in Catalonia, showing the contributions of solar zenith angle, ozone, and aerosols. High-resolution seasonal maps of typical UV index values in Catalonia are presented

Entre el visible i l' invisible

Article sobre l'obra de Salvador Dalí que es troba entre dos pols, entre la intersecció del món exterior i el món interior, entre el visible i l'invisible

Simple and fast methods based on solid-phase extraction coupled to liquid chromatography with UV detection for the monitoring of caffeine in natural and waste waters as marker of anthropogenic impact

Two concentration methods for fast and routine determination of caffeine (using HPLC-UV detection) in surface, and wastewater are evaluated. Both methods are based on solid-phase extraction (SPE) concentration with octadecyl silica sorbents. A common “offline” SPE procedure shows that quantitative recovery of caffeine is obtained with 2 mL of an elution mixture solvent methanol-water containing at least 60% methanol. The method detection limit is 0.1 μg L−1 when percolating 1 L samples through the cartridge. The development of an “online” SPE method based on a mini-SPE column, containing 100 mg of the same sorbent, directly connected to the HPLC system allows the method detection limit to be decreased to 10 ng L−1 with a sample volume of 100 mL. The “offline” SPE method is applied to the analysis of caffeine in wastewater samples, whereas the “on-line” method is used for analysis in natural waters from streams receiving significant water intakes from local wastewater treatment plants

Empirical studies of cloud effects on UV radiation: A review

The interest in solar ultraviolet (UV) radiation from the scientific community and the general population has risen significantly in recent years because of the link between increased UV levels at the Earth's surface and depletion of ozone in the stratosphere. As a consequence of recent research, UV radiation climatologies have been developed, and effects of some atmospheric constituents (such as ozone or aerosols) have been studied broadly. Correspondingly, there are well-established relationships between, for example, total ozone column and UV radiation levels at the Earth's surface. Effects of clouds, however, are not so well described, given the intrinsic difficulties in properly describing cloud characteristics. Nevertheless, the effect of clouds cannot be neglected, and the variability that clouds induce on UV radiation is particularly significant when short timescales are involved. In this review we show, summarize, and compare several works that deal with the effect of clouds on UV radiation. Specifically, works reviewed here approach the issue from the empirical point of view: Some relationship between measured UV radiation in cloudy conditions and cloud-related information is given in each work. Basically, there are two groups of methods: techniques that are based on observations of cloudiness (either from human observers or by using devices such as sky cameras) and techniques that use measurements of broadband solar radiation as a surrogate for cloud observations. Some techniques combine both types of information. Comparison of results from different works is addressed through using the cloud modification factor (CMF) defined as the ratio between measured UV radiation in a cloudy sky and calculated radiation for a cloudless sky. Typical CMF values for overcast skies range from 0.3 to 0.7, depending both on cloud type and characteristics. Despite this large dispersion of values corresponding to the same cloud cover, it is clear that the cloud effect on UV radiation is 15–45% lower than the cloud effect on total solar radiation. The cloud effect is usually a reducing effect, but a significant number of works report an enhancement effect (that is increased UV radiation levels at the surface) due to the presence of clouds. The review concludes with some recommendations for future studies aimed to further analyze the cloud effects on UV radiation

Shaping mechanisms of metal specificity in a family of metazoan Metallothioneins: evolutionary differentiation of Mollusc MTs.

Background: The degree of metal binding specificity in metalloproteins such as metallothioneins (MTs) can be crucial for their functional accuracy. Unlike most other animal species, pulmonate molluscs possess homometallic MT isoforms loaded with Cu+ or Cd2+. They have, so far, been obtained as native metal-MT complexes from snail tissues, where they are involved in the metabolism of the metal ion species bound to the respective isoform. However, it has not as yet been discerned if their specific metal occupation is the result of a rigid control of metal availability, or isoform expression programming in the hosting tissues or of structural differences of the respective peptides determining the coordinative options for the different metal ions. In this study, the Roman snail (Helix pomatia) Cu-loaded and Cd-loaded isoforms (HpCuMT and HpCdMT) were used as model molecules in order t o elucidate the biochemical and evolutionary mechanisms permitting pulmonate MTs to achieve specificity for their cognate metal ion. Results: HpCuMT and HpCdMT were recombinantly synthesized in the presence of Cd2+, Zn2+ or Cu2+ and corresponding metal complexes analysed by electrospray mass spectrometry and circular dichroism (CD) and ultra violet-visible (UV-Vis) spectrophotometry. Both MT isoforms were only able to form unique, homometallic and stable complexes (Cd6-HpCdMT and Cu12-HpCuMT) with their cognate metal ions. Yeast complementation assays demonstrated that the two isoforms assumed metal-specific functions, in agreement with their binding preferences, in heterologous eukaryotic environments. In the snail organism, the functional metal specificity of HpCdMT and HpCuMT was contributed by metal-specific transcription programming and cell-specific expression. Sequence elucidation and phylogenetic analysis of MT isoforms from a number of snail species revealed that they possess an unspecific and two metal-specific MT isoforms, whose metal specificity was achieved exclusively by evolutionary modulation of non-cysteine amino acid positions. Conclusion: The Roman snail HpCdMT and HpCuMT isoforms can thus be regarded as prototypes of isoform families that evolved genuine metal-specificity within pulmonate molluscs. Diversification into these isoforms may have been initiated by gene duplication, followed by speciation and selection towards opposite needs for protecting copper-dominated metabolic pathways from nonessential cadmium. The mechanisms enabling these proteins to be metal-specific could also be relevant for other metalloproteins.

Photoelectron spectroscopy for surface analysis: X-ray and UV excitation

This article summarizes the basic principles of photoelectron spectroscopy for surface analysis, with examples of applications in material science that illustrate the capabilities of the related techniques.

Selective ablation of photovoltaic materials with UV laser sources for monolithic interconnection of devices based on a-Si:H

Lasers are essential tools for cell isolation and monolithic interconnection in thin-film-silicon photovoltaic technologies. Laser ablation of transparent conductive oxides (TCOs), amorphous silicon structures and back contact removal are standard processes in industry for monolithic device interconnection. However, material ablation with minimum debris and small heat affected zone is one of the main difficulty is to achieve, to reduce costs and to improve device efficiency. In this paper we present recent results in laser ablation of photovoltaic materials using excimer and UV wavelengths of diode-pumped solid-state (DPSS) laser sources. We discuss results concerning UV ablation of different TCO and thin-film silicon (a-Si:H and nc-Si:H), focussing our study on ablation threshold measurements and process-quality assessment using advanced optical microscopy techniques. In that way we show the advantages of using UV wavelengths for minimizing the characteristic material thermal affection of laser irradiation in the ns regime at higher wavelengths. Additionally we include preliminary results of selective ablation of film on film structures irradiating from the film side (direct writing configuration) including the problem of selective ablation of ZnO films on a-Si:H layers. In that way we demonstrate the potential use of UV wavelengths of fully commercial laser sources as an alternative to standard backscribing process in device fabrication.