Performance of mechanical ventilators at the patient's home: a multicentric quality control study

Background: Quality control procedures vary considerably among the providers of equipment for home mechanical ventilation (HMV). Methods: A multicentre quality control survey of HMV was performed at the home of 300 patients included in the HMV programmes of four hospitals in Barcelona. It consisted of three steps: (1) the prescribed ventilation settings, the actual settings in the ventilator control panel, and the actual performance of the ventilator measured at home were compared; (2) the different ventilator alarms were tested; and (3) the effect of differences between the prescribed settings and the actual performance of the ventilator on non-programmed readmissions of the patient was determined. Results: Considerable differences were found between actual, set, and prescribed values of ventilator variables; these differences were similar in volume and pressure preset ventilators. The percentage of patients with a discrepancy between the prescribed and actual measured main ventilator variable (minute ventilation or inspiratory pressure) of more than 20% and 30% was 13% and 4%, respectively. The number of ventilators with built in alarms for power off, disconnection, or obstruction was 225, 280 and 157, respectively. These alarms did not work in two (0.9%), 52 (18.6%) and eight (5.1%) ventilators, respectively. The number of non-programmed hospital readmissions in the year before the study did not correlate with the index of ventilator error. Conclusions: This study illustrates the current limitations of the quality control of HMV and suggests that improvements should be made to ensure adequate ventilator settings and correct ventilator performance and ventilator alarm operation.

The Protein quality control system manages plant defence compound synthesis

Jasmonates are ubiquitous oxylipin-derived phytohormones that are essential in the regulation of many development, growth and defence processes. Across the plant kingdom, jasmonates act as elicitors of the production of bioactive secondarymetabolites that serve in defence against attackers. Knowledge of the conserved jasmonate perception and early signalling machineries is increasing, but the downstream mechanisms that regulate defence metabolism remain largely unknown. Herewe showthat, in the legumeMedicago truncatula, jasmonate recruits the endoplasmic-reticulum-associated degradation (ERAD)quality control system tomanagethe production of triterpene saponins, widespread bioactive compounds that share a biogenic origin with sterols. An ERAD-type RING membraneanchor E3 ubiquitin ligase is co-expressed with saponin synthesis enzymes to control the activity of 3-hydroxy-3-methylglutaryl-CoA reductase (HMGR), the rate-limiting enzyme in the supply of the ubiquitous terpene precursor isopentenyl diphosphate. Thus, unrestrained bioactive saponin accumulationis prevented and plant development and integrity secured. This control apparatus is equivalent to the ERAD system that regulates sterol synthesis in yeasts and mammals but that uses distinct E3 ubiquitin ligases, of the HMGR degradation 1 (HRD1) type, to direct destruction of HMGR. Hence, the general principles for the management of sterol and triterpene saponin biosynthesis are conserved across eukaryotes but can be controlled by divergent regulatory cues.

The Protein quality control system manages plant defence compound synthesis

Jasmonates are ubiquitous oxylipin-derived phytohormones that are essential in the regulation of many development, growth and defence processes. Across the plant kingdom, jasmonates act as elicitors of the production of bioactive secondarymetabolites that serve in defence against attackers. Knowledge of the conserved jasmonate perception and early signalling machineries is increasing, but the downstream mechanisms that regulate defence metabolism remain largely unknown. Herewe showthat, in the legumeMedicago truncatula, jasmonate recruits the endoplasmic-reticulum-associated degradation (ERAD)quality control system tomanagethe production of triterpene saponins, widespread bioactive compounds that share a biogenic origin with sterols. An ERAD-type RING membraneanchor E3 ubiquitin ligase is co-expressed with saponin synthesis enzymes to control the activity of 3-hydroxy-3-methylglutaryl-CoA reductase (HMGR), the rate-limiting enzyme in the supply of the ubiquitous terpene precursor isopentenyl diphosphate. Thus, unrestrained bioactive saponin accumulationis prevented and plant development and integrity secured. This control apparatus is equivalent to the ERAD system that regulates sterol synthesis in yeasts and mammals but that uses distinct E3 ubiquitin ligases, of the HMGR degradation 1 (HRD1) type, to direct destruction of HMGR. Hence, the general principles for the management of sterol and triterpene saponin biosynthesis are conserved across eukaryotes but can be controlled by divergent regulatory cues.

The Protein quality control system manages plant defence compound synthesis

Jasmonates are ubiquitous oxylipin-derived phytohormones that are essential in the regulation of many development, growth and defence processes. Across the plant kingdom, jasmonates act as elicitors of the production of bioactive secondarymetabolites that serve in defence against attackers. Knowledge of the conserved jasmonate perception and early signalling machineries is increasing, but the downstream mechanisms that regulate defence metabolism remain largely unknown. Herewe showthat, in the legumeMedicago truncatula, jasmonate recruits the endoplasmic-reticulum-associated degradation (ERAD)quality control system tomanagethe production of triterpene saponins, widespread bioactive compounds that share a biogenic origin with sterols. An ERAD-type RING membraneanchor E3 ubiquitin ligase is co-expressed with saponin synthesis enzymes to control the activity of 3-hydroxy-3-methylglutaryl-CoA reductase (HMGR), the rate-limiting enzyme in the supply of the ubiquitous terpene precursor isopentenyl diphosphate. Thus, unrestrained bioactive saponin accumulationis prevented and plant development and integrity secured. This control apparatus is equivalent to the ERAD system that regulates sterol synthesis in yeasts and mammals but that uses distinct E3 ubiquitin ligases, of the HMGR degradation 1 (HRD1) type, to direct destruction of HMGR. Hence, the general principles for the management of sterol and triterpene saponin biosynthesis are conserved across eukaryotes but can be controlled by divergent regulatory cues.

The Protein quality control system manages plant defence compound synthesis

Jasmonates are ubiquitous oxylipin-derived phytohormones that are essential in the regulation of many development, growth and defence processes. Across the plant kingdom, jasmonates act as elicitors of the production of bioactive secondarymetabolites that serve in defence against attackers. Knowledge of the conserved jasmonate perception and early signalling machineries is increasing, but the downstream mechanisms that regulate defence metabolism remain largely unknown. Herewe showthat, in the legumeMedicago truncatula, jasmonate recruits the endoplasmic-reticulum-associated degradation (ERAD)quality control system tomanagethe production of triterpene saponins, widespread bioactive compounds that share a biogenic origin with sterols. An ERAD-type RING membraneanchor E3 ubiquitin ligase is co-expressed with saponin synthesis enzymes to control the activity of 3-hydroxy-3-methylglutaryl-CoA reductase (HMGR), the rate-limiting enzyme in the supply of the ubiquitous terpene precursor isopentenyl diphosphate. Thus, unrestrained bioactive saponin accumulationis prevented and plant development and integrity secured. This control apparatus is equivalent to the ERAD system that regulates sterol synthesis in yeasts and mammals but that uses distinct E3 ubiquitin ligases, of the HMGR degradation 1 (HRD1) type, to direct destruction of HMGR. Hence, the general principles for the management of sterol and triterpene saponin biosynthesis are conserved across eukaryotes but can be controlled by divergent regulatory cues.

Variaciones dimensionales en piezas plásticas de inyección y análisis de los medios de control

En la industria de la automoción, así como en todas las que se dedican a fabricar piezas, ya sean plásticas o de otros materiales, es tan importante la Producción como la Calidad. No sirve de nada fabricar mucho si no son piezas de una calidad adecuada, y del mismo modo no es rentable fabricar muy poco volumen por mucho que tenga una calidad excelente. Por ello hay que buscar siempre el equilibrio entre ambos conceptos. La finalidad es tener procesos lo más robustos posibles que nos permitan fabricar cantidad con una buena calidad. La finalidad de este trabajo es buscar los parámetros que más afectan en un proceso de inyección, es decir, saber cuáles son los que debemos tener bajo control para lograr una calidad de piezas buena y un proceso estable y controlado. Para ver si el proceso es capaz de lograr ese objetivo utilizamos gráficos basados en la teoría de 6- sigma que nos calculan el coeficiente de capacidad del proceso (Cpk). A su vez analizaremos los sistemas de medida que utilizamos en cada una de las piezas analizadas para evaluar si son los correctos y nos permiten discriminar piezas buenas de malas en el proceso productivo. La conclusión del trabajo es que hay que prestar especial atención en controlar aquellos aspectos de un proceso que nos aportan variación, y no invertir tiempo ni dinero en aquellos otros que no nos aportan valor añadido y que no afectan sustancialmente al proceso. Este análisis por supuesto lleva su coste, que he analizado y plasmado en las conclusiones para saber lo que le cuesta aproximadamente a una empresa realizarlo.

Diseño e implementación de una Web dinámica como herramienta para el control de obras en base al coste del proceso de construcción

En la actualidad estamos sufriendo una situación de crisis económica de dimensiones desproporcionadas e inusuales, la cual está obligando a todas las empresas a globalizar en mayor medida el ámbito de actuación de sus negocios, por lo que muchas empresas que trabajaban exclusivamente en el ámbito local o nacional han tenido que expandirse hacia el exterior. Este hecho, añadido a la fortísima competencia existente en el mercado, obligará a todas estas empresas a tener que controlar en mayor medida la actividad productiva, y a hacerlo utilizando tecnologías que faciliten el flujo de la información dentro de la empresa, hagan que la distancia no sea un problema para la transmisión de esa información, y con las que todos los usuarios manejen los mismos datos. El sector de la construcción es uno de los más castigados por la citada crisis, y probablemente uno de los más retrasados en lo que respecta a utilización de Tecnologías de la Información y la Comunicación. El objetivo principal de este trabajo es el diseño e implementación de una web dinámica como herramienta para medir la eficiencia en el control de la actividad productiva de una empresa constructora. La manera de medir esta eficiencia será mediante la comparación mensual de los costes previstos para las diferentes obras que deba ejecutar la empresa (los cuales podemos llamar estándar) y los que se vayan produciendo realmente. La herramienta diseñada podría ir aumentando su utilidad si, añadiendo módulos mediante la ampliación de la base de datos y diseñando las pertinentes nuevas páginas web para el sitio, se usa también para otros menesteres además del control de la actividad productiva por comparación entre costes previstos y reales. Es decir, que se podría llegar a gestionar la información de todas las actividades de la empresa (compras, recursos humanos, contabilidad, gestión de calidad, etc.). Por lo tanto, una web dinámica como la expuesta en el trabajo podría servir como semilla para el desarrollo de un ERP (Enterprise Resource Planning).

Impact of quality improvement tools on the performance of firms using different quality management systems

This study compares the impact of quality management tools on the performance of organisations utilising the ISO 9001:2000 standard as a basis for a quality-management system band those utilising the EFQM model for this purpose. A survey is conducted among 107 experienced and independent quality-management assessors. The study finds that organisations with qualitymanagement systems based on the ISO 9001:2000 standard tend to use general-purpose qualitative tools, and that these do have a relatively positive impact on their general performance. In contrast, organisations adopting the EFQM model tend to use more specialised quantitative tools, which produce significant improvements in specific aspects of their performance. The findings of the study will enable organisations to choose the most effective quality-improvement tools for their particular quality strategy

Diagnosi ambiental de les fonts naturals de la zona nord-occidental del Vallès Oriental: el fenomen "garrafaire"

Aquest treball analitza un total de sis fonts naturals situades a la zona nord-occidental del Vallès Oriental amb l’objectiu de determinar-ne la seva freqüentació i en especial centrar-se en el fenomen “garrafaire”. S’ha elaborat un mètode de recompte d’usuaris, s’ha analitzat l’aigua a nivell físico-químic i microbiològic i s’ha portat a terme un sistema de caracterització ambiental d’aquestes fonts. La freqüentació és elevada a quatre de les sis fonts estudiades, de les que només tres són utilitzades habitualment per “garrafaires”. El volum d’ús d’aquestes fonts contrasta amb el control analític de la qualitat de l’aigua, per part de l’administració, que és inexistent en quatre d’elles i insuficient a les restants. La confiança per part dels usuaris cap a la qualitat de l’aigua també difereix dels resultats de les analítiques realitzades, en que l’aigua ha estat qualificada com a no apta per al consum humà en totes elles, exceptuant una única analítica d’una font que ha resultat apta per al consum humà. En conseqüència, caldria un pla de control i seguiment de la qualitat de l’aigua almenys en 4 de les fonts analitzades.

Euromaster-Quality

Aquest projecte pretén donar una solució a la gestió de documents i informes de l'àrea de qualitat d'una empresa.

Implementació d'un sistema per al control de la qualitat d'imatges JPEG (III)

Aquest TFC vol desenvolupar una aplicació gràfica per a treballar amb imatges i convertir-les al format JPEG.

The drive for quality - the impact on accounting in the wine industry

There is a substancial literature on the accounting procedures needed to trackdown the costs of quality control and quality failure. In a drive for improved quality the changes in the process of production or service delivery will also give rise to new accounting needs. In this article we take one example of an industry, wine production, where in most countries there has been a movement towards expanding higher quality production. We report on interviews with wine producers in the US, Australia, Canada, New Zealand and Spain, and identify avariety of ways in which a more sophisticated approach to accounting has become necessary as a result of the drive for quality.

Modelling of weather radar echoes from anomalous propagation using a hybrid parabolic equation method and NWP model data

Contamination of weather radar echoes by anomalous propagation (anaprop) mechanisms remains a serious issue in quality control of radar precipitation estimates. Although significant progress has been made identifying clutter due to anaprop there is no unique method that solves the question of data reliability without removing genuine data. The work described here relates to the development of a software application that uses a numerical weather prediction (NWP) model to obtain the temperature, humidity and pressure fields to calculate the three dimensional structure of the atmospheric refractive index structure, from which a physically based prediction of the incidence of clutter can be made. This technique can be used in conjunction with existing methods for clutter removal by modifying parameters of detectors or filters according to the physical evidence for anomalous propagation conditions. The parabolic equation method (PEM) is a well established technique for solving the equations for beam propagation in a non-uniformly stratified atmosphere, but although intrinsically very efficient, is not sufficiently fast to be practicable for near real-time modelling of clutter over the entire area observed by a typical weather radar. We demonstrate a fast hybrid PEM technique that is capable of providing acceptable results in conjunction with a high-resolution terrain elevation model, using a standard desktop personal computer. We discuss the performance of the method and approaches for the improvement of the model profiles in the lowest levels of the troposphere.

The situation of open access institutional repositories in Spain: 2009 report

Introduction. The DRIVER I project drew up a detailed report of European repositories based on data gathered in a survey in which Spain's participation was very low. This created a highly distorted image of the implementation of repositories in Spain. This study aims to analyse the current state of Spanish open-access institutional repositories and to describe their characteristics. Method. The data were gathered through a Web survey. The questionnaire was based on that used by DRIVER I: coverage; technical infrastructure and technical issues; institutional policies; services created; and stimulators and inhibitors for establishing, filling and maintaining their digital institutional repositories. Analysis. Data were tabulated and analysed systematically according responses obtained from the questionnaire and grouped by coverage. Results. Responses were obtained from 38 of the 104 institutions contacted, which had 29 institutional repositories. This represents 78.3% of the Spanish repositories according to the BuscaRepositorios directory. Spanish repositories contained mainly full-text materials (journal articles and doctoral theses) together with metadata. The software most used was DSpace, followed by EPrints. The metadata standard most used was Dublin Core. Spanish repositories offered more usage statistics and fewer author-oriented services than the European average. The priorities for the future development of the repositories are the need for clear policies on access to scientific production based on public funding and the need for quality control indicators. Conclusions.This is the first detailed study of Spanish institutional repositories. The key stimulants for establishing, filling and maintaining were, in order of importance, the increase of visibility and citation, the interest of decision-makers, simplicity of use and search services. On the other hand the main inhibitors identified were the absence of policies, the lack of integration with other national and international systems and the lack of awareness efforts among academia.