Magnetic properties of Fe-Cu-Nb-Si-B nanocrystaliine magnetic alloys

Several ribbons of composition Fe73.5Cu1Nb 3Si16.5B6 and Fe73.5Cu1 Nb3Si13.5B9 were prepared by annealing the as-quenched samples between 525°C and 700°C; which induced nucleation of nanocrystallites of Fe bcc-type composition. Mean grain sizes were obtained from X-ray diffraction. Static magnetic properties were measured with both a Magnet Physik Hysteresis-Graph (up to 200 Oe) and a SHE SQUID magnetometer (up to 50 kOe). Soft magnetic parameters (coercive field and initial permeability) were very sensitive to grain size. The ZFC magnetization at low field showed a broad peak at a temperature TM, thus signalling a certain distribution of nanocrystalline sizes, and TM strongly decreased when the mean grain size decreased. Isothermal magnetization curves at low temperature showed the expected asymptotic behavior of a random magnet material at low and high fields.

Magnetic properties and giant magnetoresistance in melt-spun CoCu alloys

Magnetic, structural, and transport properties of as quenched and annealed Co10Cu90 samples have been investigated using x¿ray diffraction and a SQUID magnetometer. The largest value of MR change was observed for the as¿quenched sample annealed at 450°C for 30 min. The magnetic and transport properties closely correlate with the microstructure, mainly with Co magnetic particle size and its distribution. For thermal annealing the as quenched samples below 600°C, the Co particle diameters increase from 4.0 to 6.0 nm with a magnetoresistance (MR) drop from 33.0% to 5.0% at 10 K. Comparison with the theory indicates that the interfacial electron spin¿dependent scattering mechanism correlates with GMR for Co particle diameters up to about 6.0 nm.

Mossbauer and magnetization studies of amorphous NdFeB compositionally modulated thin films

Several NdFeB compositionally modulated thin films are studied by using both conversion electron Mossbauer spectra and SQUID (superconducting quantum-interference-device) magnetometry. Both the hyperfine fields and the easy magnetization magnitude are not correlated with the modulation characteristic length (lambda) while the magnetization perpendicular to the thin-film plane decreases as lambda increases. The spectra were recorded at room temperature being the gamma rays perpendicular to the substrate plane. The magnetization measurements were recorded by using a SHE SQUID magnetometer in applied magnetic fields up to 5.5 T and in the temperature range between 1.8 and 30 K.

Systematic study of the temperature dependence of the saturation magnetization in Fe, Fe-Ni and Co-based amorphous alloys

Magnetization versus temperature in the temperature interval 2-200 K was measured for amorphous alloys of three different compositions: Fe 81.5B14.5Si4, Fe40Ni38 Mo4B18, and Co70Fe5Ni 2Mo3B5Si15. The measurements were performed by means of a SQUID (superconducting quantum interference device) magnetometer. The aim was to extract information about the different mechanisms contributing to thermal demagnetization. A powerful data analysis technique based on successive minimization procedures has demonstrated that Stoner excitations of the strong ferromagnetic type play a significant role in the Fe-Ni alloy studied. The Fe-rich and Co-rich alloys do not show a measurable contribution from single-particle excitations.

Mètodes de visualització i dinàmica de gasos relacionats amb l'escalat de cintes superconductores en planta prepilot

Ara ja fa un segle del descobriment de la superconductivitat. Aquest fenomen quàntic macroscòpic té aplicacions en el camp de la diagnosi mèdica per MRI (Magnetic Resonance Imaging), que permet obtenir imatges internes detallades del cos humà o en aplicacions científiques com el SQUID (Superconducting Quantum Interference Device), amb el que es poden mesurar camps magnètics molt dèbils, amb límits de detecció fins a 10-15 T. Però les aplicacions dels superconductors no es limiten ni molt menys a aquests camps ja que s‟estan fent grans esforços per poder processar cintes superconductores a gran escala per tal de poder aplicar aquest fenomen a cables de conducció elèctrica, motors, generadors, transformadors, etc. Amb això s‟aconseguiria un increment notable de l‟eficiència energètica amb la consegüent disminució de l‟emissió de gasos d‟efecte hivernacle. En aquest projecte, realitzat al grup de Superconductivitat i Nanoestructuració a Gran Escala de l„ICMAB, s‟han fet diversos muntatges experimentals per tal de poder observar i entendre millor el procés de piròlisi d‟una solució precursora de YBCO en forma de capes primes a sobre de diferents substrats. Aquesta etapa és determinant per obtenir en el procés de creixement una capa texturada i d‟ alta densitat de corrent crítica (Jc). Per això s‟ha fet ús d‟un sistema que permet realitzar la piròlisi de forma relativament ràpida mentre s‟enregistra en vídeo l‟evolució de la capa. En totes les mostres pirolitzades s‟ha estudiat la qualitat, textura i morfologia superficial. També s‟ha intentat veure de forma qualitativa el comportament dinàmic dels gasos a dins d‟una cavitat cilíndrica, que és la geometria utilitzada fins ara per créixer cintes superconductores. Finalment s‟han dissenyat diferents tipus de bufadors per tal d‟introduir els gasos de forma transversal i no longitudinal dins del forn tubular durant el tractament tèrmic, fet que dóna lloc a un increment de la superfície superconductora homogènia. El projecte es distribueix en diferents parts. Inicialment es fa una introducció als superconductors d‟alta temperatura així com els mètodes de fabricació actuals de les cintes superconductores. Seguidament s‟expliquen els objectius que pretenem assolir. En un apartat posterior descrivim les tècniques experimentals utilitzades. Seguidament detallem tots els resultats obtinguts junt amb les seves caracteritzacions. Finalment estudiem el impacte ambiental que ha tingut la realització d‟aquest projecte. Detallem el cost del mateix en un pressupost. En tres annexes ampliem alguns subapartats que per manca d‟espai en el text principal no hem pogut desenvolupar.

Síntesis de nanopartículas de ferritas tipo MFe2O4 (M=Fe, Co, Cu) para su aplicación en superconductores

La tecnología actual ha permitido que en los últimos años la nanociencia y la nanotecnología sean puntos críticos en el desarrollo del conocimiento. En estos momentos se desarrollan sistemas de dimensiones nanométricas que son interesantes debido a sus potenciales aplicaciones en diferentes ámbitos como en química, física, biología, materiales, medicina, cosmética... Dentro de estos sistemas nanoscópicos se encuentran las nanopartículas, estructuras con un tamaño inferior a los 100nm de longitud. En esta clasificación existen a su vez diferentes categorías, como las nanopartículas metálicas, semiconductoras, magnéticas, etc. y es exactamente en esta última tipoogía donde se centra este estudio. Este proyecto de investigación desarrolla la síntesis de magnetita (Fe3O4), ferrita de cobalto (CoFe2O4) y ferrita de cobre (CuFe2O4) con la finalidad de utilizarlas como dopante en superconductores. El método sintético utilizado es del tipo solvotérmico y se lleva a cabo en trietilenglicol, el cual actúa a la vez como disolvente y como estabilizante de las nanopartículas. Las partículas así obtenidas son dispersables en medios polares como el etanol absoluto. Los precursores de este método sintético son los respectivos acetilacetonatos metálicos debido a que el ligando orgánico descompone en productos volátiles. Existen diferentes factores que afectan a la síntesis, tales como la velocidad de ascenso de la temperatura, la agitación, la presencia de agua, la temperatura de descomposición de los precursores, etc. Algunos de estos factores han sido estudiados con detalle y aplicados con tal de optimizar el método experimental. Las nanopartículas sintetizadas han sido analizadas mediante diversas técnicas físicas con tal de establecer diferentes parámetros, tales como su composición fnal, su pureza, su estructura, sus propiedades magnéticas, etc. Estas técnicas son diversas: desde la espectroscopia infrarroja hasta medidas mediante SQUID, pasando por rayos X, microscopía electrónica y termogravimetría. Los resultados han sido favorables en la síntesis de la magnetita y también en la ferrita de cobalto, ya que las nanopartículas obtenidas son homogéneas, fácilmente dispersables en algoholes, estables por largos períodos de teimpo, rápidas de sintetizar, etc. El único problema observado ha sido la síntesis de ferrita de cobre la cual se ha de optimizar, ya que el producto final ha resultado ser una mezcla de tres compuesto diferentes.

Magnetization versus heat treatment in rapidly solidified NdFeB alloys

NdFeB melt-spun amorphous or partially amorphous alloys of four compositions were prepared. Their crystallization kinetics induced by thermal treatment was studied by differential scanning calorimetry and scanning and transmission electron microscopy. Scanning electron microscopy demonstrated that heterogeneous nucleation occurs preferentially at the ribbon surface which was in contact with the wheel. The explicit form of the kinetic equation that best describes the first stage of crystallization under high undercooling conditions was obtained for each alloy. From the crystallization results, the lower part of the experimental time-temperature-transformation curves was deduced for each alloy and extrapolated up to the high-temperature limit of their validity. Microstructural observations showed a typical size of the microcrystals obtained by heat treatment of ~100 nm. From the magnetic properties measured with a vibrating sample magnetometer, the same magnetic behavior of partially crystallized alloys is observed regardless of the temperature of annealing provided the same crystallization fraction, x, is achieved, at least for small values of x (typically ~10%).

Morphological and Magnetic Properties of Superparamagnetic Carbon-Coated Fe Nanoparticles Produced by Arc Discharge.

Spherical carbon coated iron particles of nanometric diameter in the 510 nm range have been produced by arc discharge at near-atmospheric pressure conditions (using 58·10 4 Pa of He). The particles exhibit a crystalline dense iron core with an average diameter 7.4 ± 2.0 nm surrounded by a sealed carbon shell, shown by transmission electron microscopy (TEM), selected-area diffrac- tion (SAED), energy-dispersive X-ray analysis (STEM-EDX) and electron energy loss spectroscopy (EELS). The SAED, EDX and EELS results indicate a lack of traces of core oxidized phases showing an efficient protection role of the carbon shell. The magnetic properties of the nanoparticles have been investigated in the 5300 K temperature range using a superconducting quantum interference device (SQUID). The results reveal a superparamagnetic behaviour with an average monodomain diameter of 7.6 nm of the nanoparticles. The zero field cooled and field cooled (ZFC-FC)magnetization curves show a blocking temperature (TB)at room temperature very suitable for biomedical applications (drug delivery, magnetic resonance imaging MRI, hyperthermia).

Avalanche-like vortex penetration driven by pulsed microwave fields in an epitaxial LaSrCuO thin film

Different vortex penetration regimes have been registered in the output voltage signal of a magnetometer when single microwave pulses are applied to an epitaxial overdoped La2− x Sr x CuO4 thin film in a perpendicular dc magnetic field. The onset of a significant variation in the sample magnetization which exists below threshold values of temperature, dc magnetic field, and pulse duration is interpreted as an avalanche-type flux penetration. The microwave contribution to the background electric field suggests that the nucleation of this fast vortex motion is of electric origin, which also guarantees the occurrence of vortex instabilities under adiabatic conditions via the enhancement of the flux flow resistivity. Flux creep phenomena and heat transfer effects act as stabilizing factors against the microwave-pulse-induced fast flux diffusion.

Massive consumption of gelatinous plankton by Mediterranean apex predators

Stable isotopes of carbon and nitrogen were used to test the hypothesis that stomach content analysis has systematically overlooked the consumption of gelatinous zooplankton by pelagic mesopredators and apex predators. The results strongly supported a major role of gelatinous plankton in the diet of bluefin tuna (Thunnus thynnus), little tunny (Euthynnus alletteratus), spearfish (Tetrapturus belone) and swordfish (Xiphias gladius). Loggerhead sea turtles (Caretta caretta) in the oceanic stage and ocean sunfish (Mola mola) also primarily relied on gelatinous zooplankton. In contrast, stable isotope ratios ruled out any relevant consumption of gelatinous plankton by bluefish (Pomatomus saltatrix), blue shark (Prionace glauca), leerfish (Lichia amia), bonito (Sarda sarda), striped dolphin (Stenella caerueloalba) and loggerhead sea turtles (Caretta caretta) in the neritic stage, all of which primarily relied on fish and squid. Fin whales (Balaenoptera physalus) were confirmed as crustacean consumers. The ratios of stable isotopes in albacore (Thunnus alalunga), amberjack (Seriola dumerili), blue butterfish (Stromaeus fiatola), bullet tuna (Auxis rochei), dolphinfish (Coryphaena hyppurus), horse mackerel (Trachurus trachurus), mackerel (Scomber scombrus) and pompano (Trachinotus ovatus) were consistent with mixed diets revealed by stomach content analysis, including nekton and crustaceans, but the consumption of gelatinous plankton could not be ruled out completely. In conclusion, the jellyvorous guild in the Mediterranean integrates two specialists (ocean sunfish and loggerhead sea turtles in the oceanic stage) and several opportunists (bluefin tuna, little tunny, spearfish, swordfish and, perhaps, blue butterfish), most of them with shrinking populations due to overfishing.

Feeding ecology and movements of the Barolo shearwater Puffinus baroli baroli in the Azores, NE Atlantic

Trophic ecology and movements are critical issues for understanding the role of marine predators in food webs and for facing the challenges of their conservation. Seabird foraging ecology has been increasingly studied, but small elusive species, such as those forming the"little shearwater" complex, remain poorly known. We present the first study on the movements and feeding ecology of the Barolo shearwater Puffinus baroli baroli in a colony from the Azores archipelago (NE Atlantic), combining global location-sensing units, stable isotope analyses of feathers (δ13C and δ15N), stomach flushings and data from maximum depth gauges. During the chick-rearing period, parents visited their nests most nights, foraged mainly south of the colony and fed at lower trophic levels than during the non-breeding period. Squid was the most diverse prey (6 families and at least 10 different taxa), but species composition varied considerably between years. Two squid families, Onychoteuthidae and Argonautidae, and the fish family Phycidae accounted for 82.3% of ingested prey by number. On average, maximum dive depths per foraging trip reached 14.8 m (range: 7.9 to 23.1 m). After the breeding period, birds dispersed offshore in all directions and up to 2500 km from the breeding colony, and fed at higher trophic levels. Overall, our results indicate that the Barolo shearwater is a non-migratory shearwater feeding at the lowest trophic level among Macaronesian seabirds, showing both diurnal and nocturnal activity and feeding deeper in the water column, principally on small schooling squid and fish. These traits contrast with those of 3 other Azorean Procellariiformes (Cory"s shearwater Calonectris diomedea, the Madeiran storm-petrel Oceanodroma castro and Monteiro"s storm-petrel O. monteiroi), indicating ecological segregation within the Azorean seabird community.

Stable isotopes reveal trophic segregation by sex and age in the southern giant petrel in two different foodwebs

We investigated trophic ecology variation among colonies as well as sex- and age-related differences in the diet of the southern giant petrel Macronectes giganteus, a long-lived seabird that is sexually dimorphic in size. We measured stable isotopes (δ13C, δ15N) in blood samples collected during breeding at Bird Island (South Georgia, Antarctica) in 1998 and at 2 colonies in the Argentinean area of Patagonia in 2000 and 2001. Individuals from South Georgia showed lower δ13C and δ15N values than those in Patagonia, as expected from the more pelagic location and the short length of the Antarctic food web. Males and females showed significant differences in the isotopic signatures at both localities. These differences agree with the sexual differences in diet found in previous studies, which showed that both sexes rely mainly on penguin and seal carrion, but females also feed extensively on marine prey, such as fish, squid and crustaceans. However, males from Patagonia showed significantly higher δ15N and δ13C values than females did, and the reverse trend was observed at South Georgia. This opposite trend is probably related to the different trophic level of carrion between locations: whereas penguins and pinnipeds in Patagonia rely mainly on fish and cephalopods, in South Georgia they rely mainly on krill. Stable isotope values of male and female chicks in Patagonia did not differ; both attained high values, similar to adult males and higher than adult females, suggesting that parents do not provision their single offspring differently in relation to sex; however, they seem to provide offspring with a higher proportion of carrion, probably of higher quality, and more abundant food, than they consume themselves. Stable isotopes at South Georgia were not affected by age of adults. We have provided new information on intraspecific segregation in the diet in a seabird species and have also underlined the importance of considering food web structure when studying intraspecific variability in trophic ecology.

Ontogenetic dietary changes in male South American fur seals Arctocephalus australis in northern and central Patagonia, Argentina.

This study assessed ontogenetic dietary changes in male South American fur seals Arctocephalus australis in northern and central Patagonia (Argentina) using stable isotope ratios (δ15 N and δ13 C) in vibrissae and bones. Sucking pups were characterised by higher δ15 N values and lower δ13 C values than older specimens. Weaning was associated with a marked drop of δ15 N values, both in bone and vibrissae. Such a drop was inconsistent with the consumption of local prey and may reveal movement to distant foraging grounds or physiological changes associated with either fasting or rapid growth. Stable isotope ratios indicated that juveniles fed more pelagically than subadults and adults, but that there were no major differences between the 2 latter age categories. As subadults and adults are rather similar in body mass and are much larger than juveniles, body mass may play a role in the ontogenetic dietary changes reported. Nevertheless, demersal benthic prey were always scarce in the diet of male fur seals, which relied primarily on Argentine shortfin squid and small pelagic fish throughout life, though adults also consumed large amounts of decapod crustaceans available at shallow depths. Vibrissae did not reveal regular oscillations of δ15 N or δ13 C, except in 1 individual. Thus, male fur seals from northern and central Patagonia do not appear to migrate regularly between isotopically distinct areas, although nomadic displacements cannot be ruled out.

Morphological and Magnetic Properties of Superparamagnetic Carbon-Coated Fe Nanoparticles Produced by Arc Discharge.

Spherical carbon coated iron particles of nanometric diameter in the 5-10 nm range have been produced by arc discharge at near-atmospheric pressure conditions (using 5-8·10 4 Pa of He). The particles exhibit a crystalline dense iron core with an average diameter 7.4 ± 2.0 nm surrounded by a sealed carbon shell, shown by transmission electron microscopy (TEM), selected-area diffrac- tion (SAED), energy-dispersive X-ray analysis (STEM-EDX) and electron energy loss spectroscopy (EELS). The SAED, EDX and EELS results indicate a lack of traces of core oxidized phases showing an efficient protection role of the carbon shell. The magnetic properties of the nanoparticles have been investigated in the 5-300 K temperature range using a superconducting quantum interference device (SQUID). The results reveal a superparamagnetic behaviour with an average monodomain diameter of 7.6 nm of the nanoparticles. The zero field cooled and field cooled (ZFC-FC)magnetization curves show a blocking temperature (TB)at room temperature very suitable for biomedical applications (drug delivery, magnetic resonance imaging-MRI-, hyperthermia).