Distortion control for delay-sensitive sources

We investigate the problem of finding minimum-distortion policies for streaming delay-sensitive but distortion-tolerant data. We consider cross-layer approaches which exploit the coupling between presentation and transport layers. We make the natural assumption that the distortion function is convex and decreasing. We focus on a single source-destination pair and analytically find the optimum transmission policy when the transmission is done over an error-free channel. This optimum policy turns out to be independent of the exact form of the convex and decreasing distortion function. Then, for a packet-erasure channel, we analytically find the optimum open-loop transmission policy, which is also independent of the form of the convex distortion function. We then find computationally efficient closed-loop heuristic policies and show, through numerical evaluation, that they outperform the open-loop policy and have near optimal performance.

Cities, skills, and regional change

One approach to urban areas emphasizes the existence of certain immutable relationships, such as Zipf's or Gibrat's Law. An alternative view is that urban changereflects individual responses to changing tastes or technologies. This paper examinesalmost 200 years of regional change in the U.S. and finds that few, if any, growth relationships remain constant, including Gibrat's Law. Education does a reasonable jobof explaining urban resilience in recent decades, but does not seem to predict countygrowth a century ago. After reviewing this evidence, we present and estimate a simple model of regional change, where education increases the level of entrepreneurship.Human capital spillovers occur at the city level because skilled workers produce moreproduct varieties and thereby increase labor demand. We find that skills are associatedwith growth in productivity or entrepreneurship, not with growth in quality of life, atleast outside of the West. We also find that skills seem to have depressed housing supplygrowth in the West, but not in other regions, which supports the view that educatedresidents in that region have fought for tougher land-use controls. We also present evidence that skills have had a disproportionately large impact on unemployment duringthe current recession.

La investigación regional en España. Rankings de países, instituciones y autores en ciencia regional y urbana para el período 1991-2000

Este trabajo analiza cual ha sido la evolución de la investigación en ciencia regional y urbana en España en el período 1991-2000 situándola en el contexto internacional. Para ello, se elaboran rankings de países, autores e instituciones en función de las publicaciones realizadas en una muestra de nueve revistas internacionales ampliamente reconocidas dentro de este campo. Los resultados muestran que la mejora en la posición relativa a nivel internacional encontrada por otros autores para el conjunto de la investigación española en economía también se produce en el contexto de la investigación económica regional y urbana De hecho, hay un claro aumento de la presencia a nivel internacional de los autores e instituciones españolas motivado en buena medida por un incremento de las publicaciones de autores con tradición en la investigación en ciencia regional y urbana pero también por la irrupción con fuerza de 'nuevos' autores.

Model based fault diagnosis with application to an automotive engine

Report for the scientific sojourn at the University of Linköping between April to July 2007. Monitoring of the air intake system of an automotive engine is important to meet emission related legislative diagnosis requirements. During the research the problem of fault detection in the air intake system was stated as a constraint satisfaction problem over continuous domains with a big number of variables and constraints. This problem was solved using Interval-based Consistency Techniques. Interval-based consistency techniques are shown to be particularly efficient for checking the consistency of the Analytical Redundancy Relations (ARRs), dealing with uncertain measurements and parameters, and using experimental data. All experiments were performed on a four-cylinder turbo-charged spark-ignited SAAB engine located in the research laboratory at Vehicular System Group - University of Linköping.

Sistemes integrats de gestió (Integrated Management Systems - IMS): Anàlisi empíric a les empreses de Catalunya

Projecte de recerca elaborat a partir d’una estada al Auditing and Integration of Management Systems Research Laboratory de la Universitat d’Alberta, Canadà, des de maig fins a setembre del 2007. Aquest centre porta a terme recerca de caire teòrica i bàsica aplicada a l’assegurament de la qualitat, i més concretament a l’estandardització i integració de sistemes de gestió. En primer lloc, s’han analitzat les dades obtingudes en l’estudi empíric descriptiu realitzat a Catalunya durant l’any 2005, focalitzat en els estàndards de gestió més utilitzats per les empreses catalanes, en que s’hi incloïen les normes ISO 9001, ISO 14001, OSHAS 18001 així com els nous estàndards de suport de la sèrie ISO 10000. En segon terme, i a partir d’aquest anàlisis previ, s’ha iniciat el disseny d’una metodologia flexible per a la integració dels sistemes de gestió basats en estàndards internacionals.

Control de instrumentos mediante el bus GPIB programado con MATLAB

El proyecto que se expone a continuación está dedicado al control de instrumentos mediante el bus de instrumentación GPIB programado con el software Matlab. Está dividido en dos partes. La primera, será llevada a cabo en el laboratorio de docencia y el objetivo será controlar el osciloscopio y el generador de funciones. Como ejemplo del control realizado se desarrollará una aplicación que permitirá obtener el diagrama de Bode de módulo de cualquier sistema electrónico. La segunda parte será llevada a cabo en el laboratorio de investigación y el objetivo será controlar el analizador de semiconductores. En este caso, la aplicación desarrollada permitirá la realización de medidas para la caracterización de transistores. Las aplicaciones de ambas partes estarán realizadas mediante una interfaz gráfica de usuario diseñada con la herramienta GUIDE de Matlab.

Anàlisi i redisseny de la xarxa de distribució d’ aigua potable a alta pressió de Santa Cristina d’ Aro.

En el present treball es realitza un estudi hidràulic i de qualitat de les aigües de la xarxa municipal per tal d’analitzar en primer lloc el seu estat actual i proposar posteriorment una sèrie d’actuacions de millora. Això s’ha desenvolupat amb l’ajuda d’un programa de simulació de xarxes hidràuliques i de qualitat, en ser l’estudi d’una elevada envergadura, que feia inviable l’estudi empíric de la instal•lació. El simulador utilitzat ha estat l’EPANET, el qual va estar elaborat per la NATIONAL RISK MANAGEMENT RESEARCH LABORATORY de Cincinatty, als Estats Units i traduït a l’espanyol pel grup REDHISP Inst. Ingenieria del agua y M.A. de la Universitat Politècnica de València

Microscòpia d'alta resolució aplicada a anàlisis traceològiques, tafonòmiques i zooarqueològiques

El projecte Microscòpia d'alta resolució aplicada a anàlisis traceològiques, tafonòmiques y zooarqueològiques ha permès donar continuïtat i ampliar la xarxa científica posada en marxa gràcies a dos projectes PBR anteriors entre l’IPHES i quatre centres anglesos: l’Institute of Archaeology del University College of London, el Dept of Prehistory and Europe del British Museum, el Dept of Palaeontology del Natural History Museum, i el Lithic Microwear Research Laboratory de la University of Bradford. El tema tractat ha estat l’avaluació de la resolució i de la possible complementarietat de diferents tècniques avançades de microscòpia per a l’anàlisi de les superfícies d’ossos i eines de pedra prehistòriques: microscòpia òptica, electrònica (SEM i ESEM), microscòpia làser confocal (LSCM) i el sistema Alicona 3D Infinite Imaging. Les diverses accions de mobilitat entre Catalunya i el Regne Unit realitzades han permès satisfactòriament posar en comú els procediments emprats pels diferents especialistes de cada centre. Les proves realitzades sobre materials de jaciments arqueològics clau tant britànics com de l’estat espanyol han permès avaluar els avantatges i limitacions que cada tècnica presentava segons la mostra estudiada (eines de pedra, ossos, dents...) i segons els requeriments específics de l’estudi plantejat. En termes generals, s’ha posat en evidència que les diferents tècniques explorades són força complementàries. És a dir, la gran capacitat d’augments i de resolució d’imatge dels microscopis electrònics es complementa amb unes meravelloses prestacions quant anàlisi de textures, de perfils i de reconstrucció 3D dels altres aparells. La principal conclusió que podem extreure, doncs, és que l’estudi d’aquest tipus d’objectes arqueològics requereix de l’ús combinat de diferents aparells de microscòpia. Tant els treballs realitzats com els contactes entre especialistes establerts al llarg del projecte s’han plasmat ja en treballs concrets, alguns d’ells ja publicats o en fase final de publicació.

Chemical variability in clays and pottery from a traditional cooking pot production village: Testing assumptions in Pereruela

This paper explores analytically the contemporary pottery-making community of Pereruela (north-west Spain) that produces cooking pots from a mixture of red clay and kaolin. Analyses by different techniques (XRF, NAA, XRD, SEM and petrography) showed an extremely high variability for cooking ware pottery produced in a single production centre, by the same technology and using local clays. The main source of chemical variation is related to the use of different red clays and the presence of non-normally distributed inclusions of monazite. These two factors induce a high chemical variability, not only in the output of a single production centre, but even in the paste of a single pot, to an extent to which chemical compositions from one"workshop", or even one"pot", could be classified as having different provenances. The implications for the chemical characterization and for provenance studies of archaeological ceramics are addressed.

Analcime crystallization and compositional profiles - Comparing approaches to detect post-depositional alterations in archaeological pottery

The approaches of comparative studies and profile measurements, often used in order to detect post-depositional alterations of ceramics, have been applied simultaneously to two sets of Roman pottery, both of which include altered individuals. As analytical techniques, Neutron Activation Analysis and X-Ray Diffraction have been used. Both approaches lead to substantially different results. This shows that they detect different levels of alteration and should complement each other rather than being used exclusively. For the special process of a glassy phase decomposition followed by a crystallization of the Na-zeolite analcime, the results suggest that it changes high-fired calcareous pottery rapidly, and so fundamentally that the results of various archaeometric techniques can be severely disturbed.

Alterations of Na, K and Rb concentrations in Mycenaean pottery and a proposed explanation using X-ray diffraction

One of the most important reference groups for Mycenaean pottery is the Mycenae/Berbati (MB). In several studies, a second group has been identified (MBKR). The chemical compositions were similar to MB, but with important differences in the Na, K and Rb contents. The present study suggests that these differences are due to selective alteration and contamination processes that are indirectly determined by the original firing temperature. Therefore, groups MB and MBKR should be considered as a single reference group.

Technology transfer at the periphery of the Mycenaean world: the cases of Mycenaean pottery found in central Macedonia (Greece) and the Plain of Sybaris (Italy)

The study of technology transfer in pottery production to the periphery of the Mycenaean world has been addressed by considering two different areas, southern Italy and central Macedonia. Technological features such as ceramic paste, decoration and firing have been determined for different ceramic groups established according to provenance criteria. The studies of technology and provenance have been performed following an archaeometric approach, using neutron activation analysis, petrographic analysis, X-ray diffraction and scanning electron microscopy. The results have revealed the existence of two different models. On the one hand, southern Italy seems to exhibit a more organized pottery production, which follows a Mycenaean-like technology, while in central Macedonia production is probably more varied, being based in part on the technology of the local tradition.

Chemical and mineralogical alteration of ceramics from a Late Bronze Age kiln at Kommos, Crete: the effect on the formation of a reference group

The formation of reference groups comprises an important procedure in chemical provenance studies of archaeological pottery. Material from ancient kilns is thought to be especially suitable for reference groups, as it comprises a definite unit of past production. Pottery from the Late Minoan IA kiln excavated at Kommos, Crete was analysed in order to produce a reference group in this important area of Minoan ceramic production. The samples were characterized by a combination of techniques providing information on the chemistry, mineralogy and microstructure of the ceramic body. Initially, the study was unable to establish, in a straightforward manner, a chemical reference group. Different ceramic pastes and a range of selective alterations and contaminations, affected by variable firing temperatures and burial environment, were shown to be responsible for the compositional variability. Procedures are described to compensate for such alterations and the perturbations in the data that they produce.

Chemical characterization of tin-lead glazed pottery from the Iberian Peninsula and the Canary Islands: initial steps toward a better understanding of Spanish Colonial pottery in Americas

Majolica pottery was the most characteristic tableware produced in Europe during the Medieval and Renaissance periods. Because of the prestige and importance attributed to this ware, Spanish majolica was imported in vast quantities into the Americas during the Spanish Colonial period. A study of Spanish majolica was conducted on a set of 186 samples from the 10 primary majolica production centres on the Iberian Peninsula and 22 sherds from two early colonial archaeological sites on the Canary Islands. The samples were analysed by neutron activation analysis (NAA), and the resulting data were interpreted using an array of multivariate statistical approaches. Our results show a clear discrimination between different production centres, allowing a reliable provenance attribution of the sherds from the Canary Islands.