The Standard Biplot

Biplots are graphical displays of data matrices based on the decomposition of a matrix as the product of two matrices. Elements of these two matrices are used as coordinates for the rows and columns of the data matrix, with an interpretation of the joint presentation that relies on the properties of the scalar product. Because the decomposition is not unique, there are several alternative ways to scale the row and column points of the biplot, which can cause confusion amongst users, especially when software packages are not united in their approach to this issue. We propose a new scaling of the solution, called the standard biplot, which applies equally well to a wide variety of analyses such as correspondence analysis, principal component analysis, log-ratio analysis and the graphical results of a discriminant analysis/MANOVA, in fact to any method based on the singular-value decomposition. The standard biplot also handles data matrices with widely different levels of inherent variance. Two concepts taken from correspondence analysis are important to this idea: the weighting of row and column points, and the contributions made by the points to the solution. In the standard biplot one set of points, usually the rows of the data matrix, optimally represent the positions of the cases or sample units, which are weighted and usually standardized in some way unless the matrix contains values that are comparable in their raw form. The other set of points, usually the columns, is represented in accordance with their contributions to the low-dimensional solution. As for any biplot, the projections of the row points onto vectors defined by the column points approximate the centred and (optionally) standardized data. The method is illustrated with several examples to demonstrate how the standard biplot copes in different situations to give a joint map which needs only one common scale on the principal axes, thus avoiding the problem of enlarging or contracting the scale of one set of points to make the biplot readable. The proposal also solves the problem in correspondence analysis of low-frequency categories that are located on the periphery of the map, giving the false impression that they are important.

Análisis y diseño de filtros apilados basados en resonadores acústicos

Durant els últims anys la demanda de filtres pas banda de ràdio freqüència, de reduïdes dimensions, lleugers i d'elevades prestacions destinats a sistemes de comunicacions inalàmbriques s'ha incrementat de forma significativa. Aquests sistemes principalment són els sistemes de telefonia mòbil de tercera generació UMTS y el sistema de navegació GPS. Els filtres actuals, basats en ressonadors SAW (Surface Acoustic Wave), tenen unes dimensions reduïdes però estan limitats en freqüència (3 GHz) i la seva tecnologia no és compatible amb les tecnologies estàndards de circuits integrats. Per aquestes raons s'espera que els filtres basats en ressonadors BAW (Bulk Acoustic Wave) substitueixin als SAW. Els dos tenen dimensions similars, però els filtres BAW poden funcionar a freqüències superiors a 3 GHz, poden treballar amb nivells de potència majors, i és important destacar el fet que la seva tecnologia és compatible amb les tecnologies estàndards de circuits integrats. La investigació en l'àmbit dels filtres BAW s'ha centrat en millorar els processos tecnològics i la qualitat dels materials, però s'ha treballat poc en l'adaptació de les tècniques sistemàtiques de disseny de filtres a les particularitats d'aquesta tecnologia, per tant el principal objectiu d'aquest treball és presentar mètodes sistemàtics per al disseny de filtres BAW, centrant-se en l'estudi d’estructures apilades.

Implementación de técnicas de estimación y sincronización para sistemas OFDM: aplicación directa sobre la implementación de la capa física del estándar DVB-T

El sistema de modulación ODFM es utilizado en diversas aplicaciones de banda ancha, tanto en comunicaciones por cable como en aplicaciones inalámbricas. Presenta numerosas ventajas frente a sistemas de banda ancha de portadora única ya que permite una alta eficiencia espectral, una fácil ecualización y una reducción del ISI. Por el contrario, presenta dificultades inherentes a su estructura, que son de vital importancia solventar, entre las cuales se encuentran los altos requisitos de sincronización. Este proyecto presenta métodos de sincronización de tiempo y frecuencia implementados y evaluados sobre una plataforma software basada en Matlab®, que recoge el sistema completo de transmisión basado fielmente en el estándar DVB-T. Tras una presentación de los principios de la modulación OFDM, en este documento se presenta un estudio detallado de este sistema de transmisión y su implementación, formando conjuntamente una plataforma de simulación para la evaluación de los estimadores implementados.

Memòria de recerca: paral·lelització dels diccionaris de la Standard Template Library de C++

Estudi elaborat a partir d’una estada a la Universität Karlsruhe entre gener i maig del 2007. Les biblioteques d’estructures de dades defineixen interfícies i implementen algorismes i estructures de dades fonamentals. Un exemple n’és la Satandard Template Library (STL ), que forma part del llenguatge de programació C++. En el marc d’una tesi, s’està treballant per obtenir implementacions més eficients i/o versàtils d’alguns components de la STL. Per a fer-ho s’utilitzen tècniques de la enginyeria d’algorismes. En particular, s’integra el coneixement de la comunitat algorítmica i es té en consideració la tecnologia existent. L’acció durant l’estada s’ha emmarcat en el desenvolupament la Multi Core STL (MCSTL ). La MCSTL és una implementació paral•lela de la STL per a màquines multi-core. Les màquines multi-core són actualment l’únic tipus de màquina disponible al mercat. Per tant, tot i que el paral•lelisme obtingut no sigui òptim, és preferible a tenir els processadors esperant, ja que , la tendència és que el nombre de processadors per computador augmenti.

On the existence of hysteresis in the Kuramoto model with bimodal frequency distributions

We investigate the transition to synchronization in the Kuramoto model with bimodal distributions of the natural frequencies. Previous studies have concluded that the model exhibits a hysteretic phase transition if the bimodal distribution is close to a unimodal one, due to the shallowness the central dip. Here we show that proximity to the unimodal-bimodal border does not necessarily imply hysteresis when the width, but not the depth, of the central dip tends to zero. We draw this conclusion from a detailed study of the Kuramoto model with a suitable family of bimodal distributions.

Application of standard and refined heat balance integral methods to one-dimensional Stefan problems

The work in this paper concerns the study of conventional and refined heat balance integral methods for a number of phase change problems. These include standard test problems, both with one and two phase changes, which have exact solutions to enable us to test the accuracy of the approximate solutions. We also consider situations where no analytical solution is available and compare these to numerical solutions. It is popular to use a quadratic profile as an approximation of the temperature, but we show that a cubic profile, seldom considered in the literature, is far more accurate in most circumstances. In addition, the refined integral method can give greater improvement still and we develop a variation on this method which turns out to be optimal in some cases. We assess which integral method is better for various problems, showing that it is largely dependent on the specified boundary conditions.

How to use the standard model with own data?

In this work discuss the use of the standard model for the calculation of the solvency capital requirement (SCR) when the company aims to use the specific parameters of the model on the basis of the experience of its portfolio. In particular, this analysis focuses on the formula presented in the latest quantitative impact study (2010 CEIOPS) for non-life underwriting premium and reserve risk. One of the keys of the standard model for premium and reserves risk is the correlation matrix between lines of business. In this work we present how the correlation matrix between lines of business could be estimated from a quantitative perspective, as well as the possibility of using a credibility model for the estimation of the matrix of correlation between lines of business that merge qualitative and quantitative perspective.

Design of Novel Frequency Generation Circuit with Application to Ultra-Wideband Distributed Oscillators

Given the urgence of a new paradigm in wireless digital trasmission which should allow for higher bit rate, lower latency and tigher delay constaints, it has been proposed to investigate the fundamental building blocks that at the circuital/device level, will boost the change towards a more efficient network architecture, with high capacity, higher bandwidth and a more satisfactory end user experience. At the core of each transciever, there are inherently analog devices capable of providing the carrier signal, the oscillators. It is strongly believed that many limitations in today's communication protocols, could be relieved by permitting high carrier frequency radio transmission, and having some degree of reconfigurability. This led us to studying distributed oscillator architectures which work in the microwave range and possess wideband tuning capability. As microvave oscillators are essentially nonlinear devices, a full nonlinear analyis, synthesis, and optimization had to be considered for their implementation. Consequently, all the most used nonlinear numerical techniques in commercial EDA software had been reviewed. An application of all the aforementioned techniques has been shown, considering a systems of three coupled oscillator ("triple push" oscillator) in which the stability of the various oscillating modes has been studied. Provided that a certain phase distribution is maintained among the oscillating elements, this topology permits a rise in the output power of the third harmonic; nevertheless due to circuit simmetry, "unwanted" oscillating modes coexist with the intenteded one. Starting with the necessary background on distributed amplification and distributed oscillator theory, the design of a four stage reverse mode distributed voltage controlled oscillator (DVCO) using lumped elments has been presented. All the design steps have been reported and for the first time a method for an optimized design with reduced variations in the output power has been presented. Ongoing work is devoted to model a wideband DVCO and to implement a frequency divider.

Nuclear relaxation contribution to static and dynamic (infinite frequency approximation) nonlinear optical properties by means of electrical property expansions: Application to HF, CH4, CF4, and SF6

Electrical property derivative expressions are presented for the nuclear relaxation contribution to static and dynamic (infinite frequency approximation) nonlinear optical properties. For CF4 and SF6, as opposed to HF and CH4, a term that is quadratic in the vibrational anharmonicity (and not previously evaluated for any molecule) makes an important contribution to the static second vibrational hyperpolarizability of CF4 and SF6. A comparison between calculated and experimental values for the difference between the (anisotropic) Kerr effect and electric field induced second-harmonic generation shows that, at the Hartree-Fock level, the nuclear relaxation/infinite frequency approximation gives the correct trend (in the series CH4, CF4, SF6) but is of the order of 50% too small

Intramolecular basis set superposition error effects on the planarity of benzene and other aromatic molecules: A solution to the problem

Recently, the surprising result that ab initio calculations on benzene and other planar arenes at correlated MP2, MP3, configuration interaction with singles and doubles (CISD), and coupled cluster with singles and doubles levels of theory using standard Pople’s basis sets yield nonplanar minima has been reported. The planar optimized structures turn out to be transition states presenting one or more large imaginary frequencies, whereas single-determinant-based methods lead to the expected planar minima and no imaginary frequencies. It has been suggested that such anomalous behavior can be originated by two-electron basis set incompleteness error. In this work, we show that the reported pitfalls can be interpreted in terms of intramolecular basis set superposition error (BSSE) effects, mostly between the C–H moieties constituting the arenes. We have carried out counterpoise-corrected optimizations and frequency calculations at the Hartree–Fock, B3LYP, MP2, and CISD levels of theory with several basis sets for a number of arenes. In all cases, correcting for intramolecular BSSE fixes the anomalous behavior of the correlated methods, whereas no significant differences are observed in the single-determinant case. Consequently, all systems studied are planar at all levels of theory. The effect of different intramolecular fragment definitions and the particular case of charged species, namely, cyclopentadienyl and indenyl anions, respectively, are also discussed

Wörter stehen da einige. On nominal split topicalization in non-standard viennese german

This work investigates the syntactic, semantic, and pragmatic properties of nominal Split Topicalization (ST) constructions in Standard and non-Standard German. The topic phrase denotes a property, and the MF phrase either modifies this property or picks out a specific entity. Semantically, the topic phrase will be analysed as a property-denoting expression which restricts the denotation of the verbal predicate, while the MF phrase is composed either via specify or restrict (cf. Chung and Ladusaw, 2003). Syntactically, the base position of the topic phrase is the (incorporating) verb, and the MF phrase is generated independently as the complement of the verb containing an empty pronoun. Since predicates introduce abstract discourse referents, the topic phrase can be resumed via "pro" in the MF phrase.

Sistemes logístics de codificació i identificació, i perspectives de futur

Comptar amb sistemes sofisticats de gestió o programes ERP (Enterprise Resource Planning) no és suficient per a les organitzacions. Per a què aquests recursos donin resultats adequats i actualitzats, la informació d’entrada ha de llegir-se de forma automàtica, per aconseguir estalviar en recursos, eliminació d’errors i assegurar el compliment de la qualitat. Per aquest motiu és important comptar amb eines i serveis d’identificació automàtica i col•lecció de dades. Els principals objectius a assolir (a partir de la introducció al lector de la importància dels sistemes logístics d’identificació en un entorn global d’alta competitivitat), són conèixer i comprendre el funcionament de les tres principals tecnologies existents al mercat (codis de barres lineals, codis de barres bidimensionals i sistemes RFID), veure en quin estat d’implantació es troba cadascuna i les seves principals aplicacions. Un cop realitzat aquest primer estudi es pretén comparar les tres tecnologies per o poder obtenir perspectives de futur en l’àmbit de l’autoidentificació. A partir de la situació actual i de les necessitats de les empreses, juntament amb el meravellós món que sembla obrir la tecnologia RFID (Radio Frequency Identification), la principal conclusió a la que s’arribarà és que malgrat les limitacions tècniques dels codis de barres lineals, aquests es troben completament integrats a tota la cadena logística gràcies a l’estandarització i la utilització d’un llenguatge comú, sota el nom de simbologies GTIN (Global Trade Item Number), durant tota la cadena de subministres que garanteixen total traçabilitat dels productes gràcies en part a la gestió de les bases de dades i del flux d’informació. La tecnologia RFUD amb l’EPC (Electronic Product Code) supera aquestes limitacions, convertint-se en el màxim candidat per a substituir els limitats codis de barres. Tot i això, RFID, amb l’EPC, no serà un adequat identificador logístic fins que es superin importants barreres, com són la falta d’estandarització i l’elevat cost d’implantació.

Editorial: Language, frequency and bibliometric indexes

This editorial examines the actions undertaken in number 5 and announces two important changes for the numbers 6 and 7, namely frequency and languages. Furthermore, the use of some bibliometric indicators, such as impact factor and refusal rate, is critically analyzed.

Exploring the high frequency emission of radio loud X-ray binaries

We report millimetre-wave continuum observations of the X-ray binaries Cygnus X-3, SS 433, LSI+61 303, Cygnus X-1 and GRS 1915+105. The observations were carried out with the IRAM 30 m-antenna at 250 GHz (1.25 mm) from 1998 March 14 to March 20. These millimetre measurements are complemented with centimetre observations from the Ryle Telescope, at 15 GHz (2.0 cm) and from the Green Bank Interferometer at 2.25 and 8.3 GHz (13 and 3.6 cm). Both Cygnus X-3 and SS 433 underwent moderate flaring events during our observations, whose main spectral evolution properties are described and interpreted. A significant spectral steepening was observed in both sources during the flare decay, that is likely to be caused by adiabatic expansion, inverse Compton and synchrotron losses. Finally, we also report 250 GHz upper limits for three additional undetected X-ray binary stars: LSI+65 010, LSI+61 235 and X Per.

Secondary UBVRI-CCD standard stars in the neighbourhood of Landolt standard stars

A list of 681 UBVRI secondary standard stars for CCD photometry is presented. Visual magnitude ranges from 9.7 to 19.4, and the B-V colour index varies from 1.15 to 1.97. The stars are grouped into 11 different fields, each of them is generally observable in a single CCD frame. The stars are located near Landolt UBVRI equatorial standards, accessible to telescopes in both hemispheres, and mainly within the 5 - 8 hours range of right ascension. Photometry, equatorial coordinates and finding charts are provided.