Evaluation of healing criteria for success after periapical surgery

Introduction: In periapical surgery, the absence of standardization between different studies makes it difficult to compare the outcomes. Objective: To compare the healing classification of different authors and evaluate the prognostic criteria of periapical surgery at 12 months. Material and methods: 278 patients (101 men and 177 women) with a mean age of 38.1 years (range 11 to 77) treated with periapical surgery using the ultrasound technique and a 2.6x magnifying glass, and silver amalgam as root-end filling material were included in the study. Evolution was analyzed using the clinical criteria of Mikkonen et al., 1983; radiographic criteria of Rud et al., 1972; the overall combined clinical and radiographic criteria of von Arx and Kurt, 1999; and the Friedman (2005) concept of functional tooth at 12 months of surgery. Results: After 12 months, 87.2% clinical success was obtained according to the Mikkonen et al., 1983 criteria; 73.9% complete radiographic healing using Rud et al. criteria; 62.1% overall success, following the clinical and radiographic parameters of von Arx and Kurt, and 91.9% of teeth were functional. The von Arx and Kurt criteria was found to be the most reliable. Conclusion: Overall evolution according to von Arx and Kurt agreed most closely with the other scales

Evaluation of healing criteria for success after periapical surgery

Introduction: In periapical surgery, the absence of standardization between different studies makes it difficult to compare the outcomes. Objective: To compare the healing classification of different authors and evaluate the prognostic criteria of periapical surgery at 12 months. Material and methods: 278 patients (101 men and 177 women) with a mean age of 38.1 years (range 11 to 77) treated with periapical surgery using the ultrasound technique and a 2.6x magnifying glass, and silver amalgam as root-end filling material were included in the study. Evolution was analyzed using the clinical criteria of Mikkonen et al., 1983; radiographic criteria of Rud et al., 1972; the overall combined clinical and radiographic criteria of von Arx and Kurt, 1999; and the Friedman (2005) concept of functional tooth at 12 months of surgery. Results: After 12 months, 87.2% clinical success was obtained according to the Mikkonen et al., 1983 criteria; 73.9% complete radiographic healing using Rud et al. criteria; 62.1% overall success, following the clinical and radiographic parameters of von Arx and Kurt, and 91.9% of teeth were functional. The von Arx and Kurt criteria was found to be the most reliable. Conclusion: Overall evolution according to von Arx and Kurt agreed most closely with the other scales

Histopathological evaluation of root canal filling materials for primary teeth

This study aimed to assess the response of apical and periapical tissues of dogs¿ teeth after root canal filling with different materials. Forty roots from dogs¿ premolars were prepared biomechanically and assigned to 4 groups filled with: Group I: commercial calcium hydroxide and polyethylene glycol-based paste (Calen®) thickened with zinc oxide; Group II: paste composed of iodoform, Rifocort® and camphorated amonochlorophenol; Group III: zinc oxide-eugenol cement; Group IV: sterile saline. After 30 days, the samples were subjected to histological processing. The histopathological findings revealed that in Groups I and IV the apical and periapical regions exhibited normal appearance, with large number of fibers and cells and no resorption of mineralized tissues. In Group II, mild inflammatory infiltrate and mild edema were observed, with discrete fibrogenesis and bone resorption. Group III showed altered periapical region and thickened periodontal ligament with presence of inflammatory cells and edema. It may be concluded that the Calen paste thickened with zinc oxide yielded the best tissue response, being the most indicated material for root canal filling of primary teeth with pulp vitality.

A comparative study of silver amalgam and compomer as retrograde filling materials in periapical surgery

Objective: A comparative study is made of the histological effects of silver amalgam versus compomer (Dyract®) 90 days after placement as retrograde filling materials in experimental animals. Method: Six Beagle dogs were used, with total pulpectomy and orthograde material filling followed by periapical surgery of the 6 upper and 6 lower incisors (for a total of 72 teeth). Thirty-six teeth corresponded to the right side and were filled with the control material (silver amalgam), while the 36 teeth on the left side were filled with the compomer study material (Dyract®). After three months the animals were sacrificed and the histological study was carried out, with evaluation of bone formation, inflammation, and the tissue in contact with the filler material. The results obtained were subjected to a descriptive and comparative statistical analysis (chi-square test). Results: The samples retrogradely filled with compomer showed significantly greater percentage inflammation (76.19% versus 26.66% in the control group). On the other hand, a large proportion of samples with root cement growth were found in the compomer group. Filler material expulsion was also significantly more common when compomer was used. Conclusions: the comparative study of the histological findings showed greater inflammation but also greater root cement growth in the compomer group versus the controls

Material flow accounting of Spain

Material throughput is a means of measuring the so-called social metabolism, or physical dimensions of a society’s consumption, and can be taken as an indirect and approximate indicator of sustainability. Material flow accounting can be used to test the dematerialisation hypothesis, the idea that technological progress causes a decrease in total material used (strong dematerialisation) or material used per monetary unit of output (weak dematerialisation). This paper sets out the results of a material flow analysis for Spain for the period from 1980 to 2000. The analysis reveals that neither strong nor weak dematerialisation took place during the period analysed. Although the population did not increase considerably, materials mobilised by the Spanish economy (DMI) increased by 85% in absolute terms, surpassing GDP growth. In addition, Spain became more dependent on external trade in physical terms. In fact, its imports are more than twice the amount of its exports in terms of weight.

Free and fragmenting filling length

The filling length of an edge-circuit η in the Cayley 2-complex of a finite presentation of a group is the minimal integer length L such that there is a combinatorial null-homotopy of η down to a base point through loops of length at most L. We introduce similar notions in which the full-homotopy is not required to fix a base point, and in which the contracting loop is allowed to bifurcate. We exhibit a group in which the resulting filling invariants exhibit dramatically different behaviour to the standard notion of filling length. We also define the corresponding filling invariants for Riemannian manifolds and translate our results to this setting.

Material flow accounting of Mexico (1970-2003)

This technical background paper describes the methods applied and data sources used in the compilation of the 1980-2003 data set for material flow accounts of the Mexican economy and presents the data set. It is organised in four parts: the first part gives an overview of the Material Flow Accounting (MFA) methodology. The second part presents the main material flows of the Mexican economy including biomass, fossil fuels, metal ores, industrial minerals and, construction minerals. The aim of this part is to explain the procedures and methods followed, the data sources used as well as providing a brief evaluation of the quality and reliability of the information used and the accounts established. Finally, some conclusions will be provided.

Material Flow Accounting in Chile, Ecuador, Mexico and Peru (1980-2000)

In this paper we compare the resource flows of Chile, Ecuador, Mexico and Peru between 1980 and 2000. In this time span, the domestic extraction of materials increased in the four countries, mainly due to the mining sector in Chile and Peru, biomass and oil in Ecuador and construction minerals in Mexico. Imports and exports increased too, due to the increasing integration in the international markets, prompted by the liberalization policies undertaken by the four countries between the late 1970s and the late 1990s. The four countries had a negative physical trade balance for most of the period analyzed, meaning that their exports exceeded their imports in terms of weight. However, the increase of imports reduced the physical deficit in Chile, Mexico and Peru. Ecuador’s physical deficit was the highest and did not decrease in the period analyzed. Also, a diversification of exports away from bulk commodities could be observed in Chile and Mexico, and to a lesser extent in Peru, whereas in Ecuador the export sector remained mainly based on oil and biomass. More research is needed to explore the environmental effects of this phenomenon. Also, the indirect flows associated to the direct physical flows deserve to be subject to further analysis.

Evaluación agronómica e industrial del material vegetal de avellano en Cataluña. Estudio de nuevas aplicaciones tecnológicas de la avellana

Los frutos secos representan un peso notable en la producción final agrícola española, siendo nuestro país el segundo productor mundial de almendra (55.000 tm grano) y el cuarto de avellana (9.000 tm grano). En el caso del avellano, la superficie de España es de unas 25.000 ha (MAPA, 2000), concentrándose el 95 % de la misma en Cataluña y, más concretamente en Tarragona (18.000 ha), donde el avellano es, en diversas comarcas, una importante fuente de ingresos. Durante las últimas décadas, el sector ha estado sometido a fuertes crisis debido al descenso de precios causado, entre otros motivos, por la existencia o no de acuerdos comerciales entre la UE y Turquía sobre este fruto seco, por las oscilaciones del dólar y la competencia creciente de Turquía, que produce casi el 75 % del total mundial y cuyos costes de producción son más reducidos, por disponer de mano de obra más barata y mejores condiciones edafoclimáticas para el cultivo. Un problema adicional de la avellana española en dicho periodo, fue la poca calidad del producto obtenido, motivada por la realización inadecuada de una serie de prácticas de recogida y de postcosecha. La variedad 'Negret' es la base de la producción de avellana española para industria y, junto con la ‘Pauetet’, constituyen el tipo comercial ‘negreta’ que es el que obtiene mejor precio en el mercado nacional. Ello es debido a sus buenas características organolépticas y elevada aptitud al tostado, que constituye el punto de partida de la mayoría de aplicaciones comerciales. Por otra parte, constituye, también, la base de la producción de la Denominación de Origen ‘Avellana de Reus’. Tradicionalmente esta variedad adolece de importantes problemas de tipo agronómico (poco vigor, rebrotante, sensible a clorosis férrica, asfixia del suelo, muy virosada, etc.) y comercial (facilidad de enranciamiento, calibres pequeños, etc.), situación que ha inducido, en la última década, a la introducción de variedades foráneas (‘Tonda Giffoni’ y ‘Tonda Romana’) que en principio no presentan estos problemas. Sin embargo, la sustitución de la variedad autóctona ‘Negret’ por otras nuevas supondría la pérdida de un carácter diferencial para la producción española, que debe evaluarse con sumo cuidado.

Mejora de la competitividad de las plantaciones frutales de nogal: selección de material vegetal, desarrollo de un modelo de predicción de la infección de Xanthomonas arboricola pv. juglandis y optimización de las podas de formación y producción

En las colecciones del IRTA-Mas Bové se han caracterizado más de 150 clones de nogal procedentes de prospección, material extranjero y de selecciones de distintos programas de mejora. El material se ha caracterizado agronómicamente siguiendo los descriptores del IPGRI (1994). Actualmente existen fichas descriptivas muy amplias de 43 accesiones. Toda esta información sobre el comportamiento del material vegetal en las condiciones climáticas de Tarragona, tiene interés a nivel científico y es muy válida para posibles plantaciones con nuevo material. El estudio de los caracteres de sensibilidad a Bacteriosis y afección de la caída prematura de flores (PFA), en dos decendencias de nogal de cruzamientos controlados, ha permitido obvervar que estos caracteres tienen una herencia compleja. Se ha establecido la virulencia de distintos aislados de Xanthomonas arboricola pv. juglandis, en nogal. Los aislados más virulentos se han utilizado para establecer un modelo de predicción, en condiciones de laboratorio, de esta bacteria en nogal. La temperatura a la que la severidad de la enfermedad es máxima es 26ºC. A esta temperatura un aumento en la duración del período de humedad relativa elevada de 0-24 horas, produce un aumento de la afección. En los próximos años, este modelo de predicción se validará en campo. Si los resultados son positivos, permitirán racionalizar los tratamientos para la Bacteriosis en las plantaciones de nogal. Los primeros resultados de un control de la iluminación en el interior de las copas de los árboles, realizado mediante medidas de iluminación interceptadas con un ceptómetro Delta T (SunScan), han puesto de manifiesto que la gran influencia de la luz en el crecimiento anual de las ramas. Así, en la formación y poda de los árbles hay que tener presente estos resultados, en especial en las formaciones en ejes libres, y favorecer la máxima entrada de luz en el interior de la copa de los árboles.

The biophysical perspective of a middle income economy: material flows in Mexico

We analyse natural resource use dynamics in the Mexican economy during the last three decades. Despite low and uneven economic growth, the extraction and use of materials in the Mexican economy has continuously increased during the last 30 years. In this period, population growth rather than economic growth was the main driving force for biophysical growth. In addition, fundamental changes have taken place in the primary sectors, in manufacturing, and in household consumption and these are reflected in an increasing emphasis on the use of fossil fuels and construction materials. Mexico’s economy has been strongly influenced by international trade since the country commenced competing in international markets. In the 1970s, Mexico mainly exported primary resources. This pattern has changed and manufactured goods now have a much greater importance due to a boom in assembling industries. In contrast with other Latin American countries, Mexico has achieved a diversification of production, moving towards technology-intensive products and a better mix in its export portfolio. However, crude oil exports still represent the single most important export good. Mexico’s material consumption is still well below the OECD average but is growing fast and the current resource use patterns may well present serious social and environmental problems to the medium and long term sustainability of Mexico’s economy and community. Information on natural resource use and resource productivity could provide valuable guidance for economic policy planning in Mexico.