The implementation of liquid chromatography tandem mass spectrometry for the official control of lipophilic toxins in seafood: Single-laboratory validation under four chromatographic conditions

We performed a comprehensive study to assess the fit for purpose of four chromatographic conditions for the determination of six groups of marine lipophilic toxins (okadaic acid and dinophysistoxins, pectenotoxins, azaspiracids, yessotoxins, gymnodimine and spirolides) by LC-MS/MS to select the most suitable conditions as stated by the European Union Reference Laboratory for Marine Biotoxins (EURLMB). For every case, the elution gradient has been optimized to achieve a total run-time cycle of 12 min. We performed a single-laboratory validation for the analysis of three relevant matrices for the seafood aquaculture industry (mussels, pacific oysters and clams), and for sea urchins for which no data about lipophilic toxins have been reported before. Moreover, we have compared the method performance under alkaline conditions using two quantification strategies: the external standard calibration (EXS) and the matrix-matched standard calibration (MMS). Alkaline conditions were the only scenario that allowed detection windows with polarity switching in a 3200 QTrap mass spectrometer, thus the analysis of all toxins can be accomplished in a single run, increasing sample throughput. The limits of quantification under alkaline conditions met the validation requirements established by the EURLMB for all toxins and matrices, while the remaining conditions failed in some cases. The accuracy of the method and the matrix effects where generally dependent on the mobile phases and the seafood species. The MMS had a moderate positive impact on method accuracy for crude extracts, but it showed poor trueness for seafood species other than mussels when analyzing hydrolyzed extracts. Alkaline conditions with EXS and recovery correction for OA were selected as the most proper conditions in the context of our laboratory. This comparative study can help other laboratories to choose the best conditions for the implementation of LC-MS/MS according to their own necessities.

R&D in the pharmaceutical industry: A world of small innovations

It is commonly argued that in recent years pharmaceutical companies have directed theirR&D towards small improvements of existing compounds instead of more risky drastic innovations. In this paper we show that the proliferation of these small innovations is likely to be linked to the lack of market sensitivity of a part of the demand to changes in prices. Compared to their social contribution, small innovations are relatively more profitable than large ones because they are targeted to the smaller but more inelastic part of the demand. We also study the effect of regulatory instruments such as price ceilings, copayments and reference prices and extend the analysis to competition in research.

Logistics integration processes in the food industry

This paper analyses the integration process that firms follow toimplement Supply Chain Management (SCM). This study has beeninspired in the integration model proposed by Stevens (1989). Hesuggests that companies internally integrate first and then extendintegration to other supply chain members, such as customers andsuppliers.To analyse the integration process a survey was conducted amongSpanish food manufacturers. The results show that there are companiesin three different integration stages. In stage I, companies are notintegrated. In stage II, companies have a medium-high level of internalintegration in the Logistics-Production interface, a low level ofinternal integration in the Logistics-Marketing interface, and a mediumlevel of external integration. And, in stage III, companies have highlevels of integration in both internal interfaces and in some of theirsupply chain relationships.

Work Organization Practices for Lean Production: A Study in Spanish and Brazilian Manufacturers

This work aims to discuss particular work organization practices in human resources reported as successful by companies adopting lean production principles, and investigate them through real examples observed on manufacturing plants in Spain and Brazil. A set of work organization practices was previously established by one of the authors, through interviews with practitioners of lean production and review of the literature. A series of visits and informal interviews at Spanish and Brazilian automotive parts manufacturers that follow lean production were conducted to verify that the set of policies are indeed practiced.

Method development for the simultaneous determination of methylmercury and inorganic mercury in seafood

This paper reports the method development for the simultaneous determination of methylmercury MeHgþ) and inorganic mercury (iHg) species in seafood samples. The study focused on the extraction and quantification of MeHgþ (the most toxic species) by liquid chromatography coupled to on-line UV irradiation and cold vapour atomic fluorescence spectroscopy (LC-UV-CV-AFS), using HCl 4 mol/L as the extractant agent. Accuracy of the method has been verified by analysing three certified reference materials and different spiked samples. The values found for total Hg and MeHgþ for the CRMs did not differ significantly from certified values at a 95% confidence level, and recoveries between 85% and 97% for MeHgþ, based on spikes, were achieved. The detection limits (LODs) obtained were 0.001 mg Hg/kg for total mercury, 0.0003 mg Hg/kg for MeHgþ and 0.0004 mg Hg/kg for iHg. The quantification limits (LOQs) established were 0.003 mg Hg/kg for total mercury, 0.0010 mg Hg/kg for MeHgþ and 0.0012 mg Hg/kg for iHg. Precision for each mercury species was established, being 12% in terms of RSD in all cases. Finally, the developed method was applied to 24 seafood samples from different origins and total mercury contents. The concentrations for Total Hg, MeHg and iHg ranged from 0.07 to 2.33, 0.003-2.23 and 0.006-0.085 mg Hg/kg, respectively. The established analytical method allows to obtain results for mercury speciation in less than 1 one hour including both, sample pretreatment and measuring step.

Earnings quality and performance in the banking industry: a profit frontier approach

The analysis of efficiency and productivity in banking has received a great deal of attention for almost three decades now. However, most of the literature to date has not explicitly accounted for risk when measuring efficiency. We propose an analysis of profit efficiency taking into account how the inclusion of a variety of bank risk measures might bias efficiency scores. Our measures of risk are partly inspired by the literature on earnings management and earnings quality, keeping in mind that loan loss provisions, as a generally accepted proxy for risk, can be adjusted to manage earnings and regulatory capital. We also consider some variants of traditional models of profit efficiency where different regimes are stipulated so that financial institutions can be evaluated in different dimensions—i.e., prices, quantities, or prices and quantities simultaneously. We perform this analysis on the Spanish banking industry, whose institutions have been deeply affected by the current international financial crisis, and where re-regulation is taking place. Our results can be explored in multiple dimensions but, in general, they indicate that the impact of earnings management on profit efficiency is of less magnitude than what might a priori be expected, and that on the whole, savings banks have performed less well than commercial banks. However, savings banks are adapting to the new regulatory scenario and rapidly catching up with commercial banks, especially in some dimensions of performance.

Technology, business models and network structure in the airline industry

Network airlines have been increasingly focusing their operations on hub airports through the exploitation of connecting traffic, allowing them to take advantage of economies of traffic density, which are unequivocal in the airline industry. Less attention has been devoted to airlines? decisions on point-to-point thin routes, which could be served using different aircraft technologies and different business models. This paper examines, both theoretically and empirically, the impact on airlines ?networks of the two major innovations in the airline industry in the last two decades: the regional jet technology and the low-cost business model. We show that, under certain circumstances, direct services on point-to-point thin routes can be viable and thus airlines may be interested in deviating passengers out of the hub.

Technology, business models and network structure in the airline industry

Network airlines have been increasingly focusing their operations on hub airports through the exploitation of connecting traffic, allowing them to take advantage of economies of traffic density, which are unequivocal in the airline industry. Less attention has been devoted to airlines' decisions on point-to-point thin routes, which could be served using different aircraft technologies and different business models. This paper examines, both theoretically and empirically, the impact on airlines' networks of the two major innovations in the airline industry in the last two decades: the regional jet technology and the low-cost business model. We show that, under certain circumstances, direct services on point-to-point thin routes can be viable and thus airlines may be interested in deviating passengers out of the hub. Keywords: regional jet technology; low-cost business model; point-to-point network; hub-and-spoke network JEL Classi…fication Numbers: L13; L2; L93

Indicator taxa of benthic diatom communities: a case study in Mediterranean streams

A key issue in the implementation of the Water Framework Directive is the classification of streams and rivers using biological quality parameters and type-specific reference conditions. Four groups of stream types were defined in NE Spain on the basis of 152 diatom samples by means of detrended correspondence analysis and classification techniques. Diatom analysis was restricted to epilithic taxa, and the sites included gradients ranging from near-natural streams to sites with poor ecological quality. The main gradient shows a clear separation of sites in relation to the degree of human influence: polluted streams (mainly located in the lowlands) differ from streams in mountainous areas and in the Pyrenees. A second gradient is related to physiographical features. Headwater streams can be distinguished by their catchment geology. The type-specific diatom taxa for the stream types studied were determined by using indicator species analysis (IndVal). The type-specific taxa from near-natural streams are coincident with the indicator taxa for high ecological status. Human impact reduced the typological heterogeneity of the diatom community composition. Overall, the diatom communities in NE Spain exhibit a regional distribution pattern that closely corresponds with that observed in river systems elsewhere. Physiographical differences are only evident in undisturbed sites, while nutrient enrichment and other human disturbances may mask the regional differences in the distribution of diatom communities

Health-related quality of life assessment in people with multiple sclerosis and their family caregivers. A multicenter study in Catalonia (Southern Europe)

Objectives: To measure the health-related quality of life (HRQoL) of multiple sclerosis (MS) patients and their caregivers, and to assess which factors can best describe HRQoL. Methods: A cross-sectional multicenter study of nine hospitals enrolled MS patients and their caregivers who attended outpatient clinics consecutively. The instruments used were the SF-36 for patients and the SF-12 and GHQ-12 for caregivers. Classification and regression tree analysis was used to analyze the explanatory factors of HRQoL. Results: A total of 705 patients (mean age 40.4 years, median Expanded Disability Status Scale 2.5, 77.8% with relapsing-remitting MS) and 551 caregivers (mean age 45.4 years) participated in the study. MS patients had significantly lower HRQoL than in the general population (physical SF-36: 39.9; 95% confidence interval [CI]: 39.1–40.6; mental SF-36: 44.4; 95% CI: 43.5–45.3). Caregivers also presented lower HRQoL than general population, especially in its mental domain (mental SF-12: 46.4; 95% CI: 45.5–47.3). Moreover, according to GHQ-12, 27% of caregivers presented probable psychological distress. Disability and co-morbidity in patients, and co-morbidity and employment status in caregivers, were the most important explanatory factors of their HRQoL. Conclusions: Not only the HRQoL of patients with MS, but also that of their caregivers, is indeed notably affected. Caregivers’ HRQoL is close to population of chronic illness even that the patients sample has a mild clinical severity and that caregiving role is a usual task in the study context

Non-invasive monitoring of diaphragmatic timing by means of surface contact sensors: an experimental study in dogs

Background: Non-invasive monitoring of respiratory muscle function is an area of increasing research interest, resulting in the appearance of new monitoring devices, one of these being piezoelectric contact sensors. The present study was designed to test whether the use of piezoelectric contact (non-invasive) sensors could be useful in respiratory monitoring, in particular in measuring the timing of diaphragmatic contraction.Methods: Experiments were performed in an animal model: three pentobarbital anesthetized mongrel dogs. The motion of the thoracic cage was acquired by means of a piezoelectric contact sensor placed on the costal wall. This signal is compared with direct measurements of the diaphragmatic muscle length, made by sonomicrometry. Furthermore, to assess the diaphragmatic function other respiratory signals were acquired: respiratory airflow and transdiaphragmatic pressure. Diaphragm contraction time was estimated with these four signals. Using diaphragm length signal as reference, contraction times estimated with the other three signals were compared with the contraction time estimated with diaphragm length signal.Results: The contraction time estimated with the TM signal tends to give a reading 0.06 seconds lower than the measure made with the DL signal (-0.21 and 0.00 for FL and DP signals, respectively), with a standard deviation of 0.05 seconds (0.08 and 0.06 for FL and DP signals, respectively). Correlation coefficients indicated a close link between time contraction estimated with TM signal and contraction time estimated with DL signal (a Pearson correlation coefficient of 0.98, a reliability coefficient of 0.95, a slope of 1.01 and a Spearman's rank-order coefficient of 0.98). In general, correlation coefficients and mean and standard deviation of the difference were better in the inspiratory load respiratory test than in spontaneous ventilation tests.Conclusion: The technique presented in this work provides a non-invasive method to assess the timing of diaphragmatic contraction in canines, using a piezoelectric contact sensor placed on the costal wall.

The drive for quality - the impact on accounting in the wine industry

There is a substancial literature on the accounting procedures needed to trackdown the costs of quality control and quality failure. In a drive for improved quality the changes in the process of production or service delivery will also give rise to new accounting needs. In this article we take one example of an industry, wine production, where in most countries there has been a movement towards expanding higher quality production. We report on interviews with wine producers in the US, Australia, Canada, New Zealand and Spain, and identify avariety of ways in which a more sophisticated approach to accounting has become necessary as a result of the drive for quality.

Wage determination in the Spanish industry

In this paper we estimate wage equations for the Spanish industryusing time series data on 85 industrial sectors, which allows us todistinguish between aggregate and sector specific effects in wagedetermination. Industry wages respond mainly to economy wide labourmarket conditions and to a much lesser extent to sector specificproductivity gains. The size of the insider effect has not remainedstable through the sample period. The estimated equations show a strongtransitory effect of unemployment on wages, which is in accordancewith the non--stationarity of the Spanish unemployment rate. Thishysteresis effect seems well accounted for by the sharp rise in theproportion of long term unemployment.

Efectos de la presencia social de las lenguas escolares en el desarrollo lingüístico del alumnado extranjero. Un estudio empírico en Cataluña = The Social Presence of School Languages and Their Effects on the Development of Immigrant Students’ Linguistic Proficiency. An Empirical Study in Catalonia

El estudio de las variables relacionadas con la adquisición de las lenguas escolares en contextos bilingües y multilingües ha resurgido a raíz de la incorporación de alumnado extranjero al sistema educativo español. En este sentido, y gracias a su peculiar situación sociolingüística, Cataluña se ha convertido en un observatorio perfecto para estudiar el proceso de adquisición de lenguas del alumnado extranjero. En este artículo presentamos una parte de los datos obtenidos en la evaluación del conocimiento de catalán y del castellano de 668 alumnos extranjeros de sexto de Primaria escolarizados en 57 centros de Cataluña. Con ello pretendemos estudiar los efectos de la presencia y del uso social de las lenguas escolares en el conocimiento lingüístico de este alumnado. La hipótesis principal es que el desarrollo de buenos niveles de conocimiento escrito de las lenguas escolares por parte de los alumnos extranjeros depende, en buena medida, de las oportunidades que haya en el entorno social para que ellos puedan utilizar estas lenguas en los intercambios comunicativos informales con sus compañeros o con otros adultos. Las conclusiones del trabajo señalan las relaciones existentes entre el desarrollo de habilidades lingüísticas conversacionales y el de habilidades lingüísticas cognitivo-académicas (Cummins, 1979b), en el sentido de que tanto el conocimiento escrito de catalán como el de castellano que tiene el alumnado extranjero están condicionados por el nivel de desarrollo conversacional previo en ambas lenguas. Además, apuntan a que la transferencia de habilidades lingüísticas cognitivo-académicas no se produce directamente entre el catalán y el castellano, sino que depende fundamentalmente de la presencia social que tengan estas lenguas y de sus usos informales. Así, en la medida en que un buen número de estudiantes extranjeros no desarrolla suficiente competencia lingüística conversacional ni en catalán ni en castellano, el proceso de adquisición de las lenguas escolares se alarga más allá de los seis años