Quantification of environment-driven changes in epiphytic macroinvertebrate communities associated to Phragmites australis

The epiphytic macroinvertebrate communities associated with the Common Reed, Phragmites australis (Cav.) Trin. ex Steudel, were examined seasonally from summer 2004 to spring 2005 in eleven coastal lagoons of the Llobregat Delta (NE Spain) following the method proposed by Kornijów & Kairesalo (1994). The aims of the study were to: 1) characterise and quantify changes in epiphytic macroinvertebrate communities along environmental gradients; 2) assess the contribution of elements of the epiphytic compartment to structuring the community; 3) define the optima and tolerances of selected epiphytic macroinvertebrate taxa for the most relevant ecological factors responsible for assemblage composition; and 4) identify possible epiphytic species assemblages that would allow a lagoon"s typology to be established, as well as their representative indicator species. Communities showed statistically significant seasonal variation, with two faunal peaks: one in summer, with high chironomid densities, and the other in winter, with high naidid densities. These peaks showed a clear response to the influence of environmental factors. Salinity explained the highest percentage of total variance (36%), while trophic variables (nutrients, phytoplanktonic chlorophyll-a, and total organic carbon) and epiphyton biomass (19.2 and 4% of total variance explained, respectively) were secondary. Three different epiphytic macroinvertebrate species assemblages could be defined. These assemblages were directly linked to conductivity conditions, which determined the rate of survival of certain taxa, and to the existence of a direct connection with the sea, which permitted the establishment of 'brackish-water' species. In spite of the existence of these species assemblages, the species composition and biomass of epiphytic macroinvertebrates and epiphyton differed substantially between lagoons; both elements were subject to changes in the environment, which finally determined the site-to-site variation in the density and composition of the macroinvertebrate population

Environment conditions and biological innovations in the european agrarian growth, 1819-1939

The circumstances that were the driving forces behind Europe's economic growth beginning in the 19th century are diverse, and not easily prioritized. Until the 1970's, specifically, in Economy and Economic History, attention was focused on different institutional and technological variables, and various regularities were proposed. Nevertheless, new studies also underlined that the evolution of economic activity could not be understood considering only the new production possibilities offered by market economies. As a result, today it is also accepted that those processes can not be explained without considering two additional circumstances: the energy flows that sustained them, and the changes undergone in their transformation In this context, a question arises that takes on special importance. Which was the influence of the biological change in the economic growth?. A part of the flows of energy must be made into food, and this transformation can only happen with the participation.

The role of central bank operating procedures in an economy with productive government spending

The choice of either the rate of monetary growth or the nominal interest rate as the instrument controlled by monetary authorities has both positive and normative implications for economic performance. We reexamine some of the issues related to the choice of the monetary policy instrument in a dynamic general equilibrium model exhibiting endogenous growth in which a fraction of productive government spending is financed by means of issuing currency. When we evaluate the performance of the two monetary instruments attending to the fluctuations of endogenous variables, we find that the inflation rate is less volatile under nominal interest rate targeting. Concerning the fluctuations of consumption and of the growth rate, both monetary policy instruments lead to statistically equivalent volatilities. Finally, we show that none of these two targeting procedures displays unambiguously higher welfare levels.

The spatial effect of intra-metropolitan agglomeration economies

This study deals with the role of spatial accessibility to agglomeration economies in the change in spatial structure of industrial employment for the case of the Barcelona Metropolitan Region of Barcelona (BMR). Using the growth in gross density of municipal employment between 1986 and 1996 for seven manufacturing industries as an indicator of changes in the spatial structure of employment, an exploration is made of the spatial impact of agglomeration economies operating on a local scale the municipality and three areas 5, 8 and 12 kilometres away surrounding the municipality itself - , agglomeration economies emerging from CBD and the main specialised subcentres in the region, and the network economies associated with the total jobs in the region, access to which depends on the distance from the main transport infrastructures

Leading indicator properties of US high-yield credit spreads

In this paper we examine the out-of-sample forecast performance of high-yield credit spreads regarding real-time and revised data on employment and industrial production in the US. We evaluate models using both a point forecast and a probability forecast exercise. Our main findings suggest the use of few factors obtained by pooling information from a number of sector-specific high-yield credit spreads. This can be justified by observing that, especially for employment, there is a gain from using a principal components model fitted to high-yield credit spreads compared to the prediction produced by benchmarks, such as an AR, and ARDL models that use either the term spread or the aggregate high-yield spread as exogenous regressor. Moreover, forecasts based on real-time data are generally comparable to forecasts based on revised data. JEL Classification: C22; C53; E32 Keywords: Credit spreads; Principal components; Forecasting; Real-time data.

Analyzing the effects of transient faults into applications

As computer chips implementation technologies evolve to obtain more performance, those computer chips are using smaller components, with bigger density of transistors and working with lower power voltages. All these factors turn the computer chips less robust and increase the probability of a transient fault. Transient faults may occur once and never more happen the same way in a computer system lifetime. There are distinct consequences when a transient fault occurs: the operating system might abort the execution if the change produced by the fault is detected by bad behavior of the application, but the biggest risk is that the fault produces an undetected data corruption that modifies the application final result without warnings (for example a bit flip in some crucial data). With the objective of researching transient faults in computer system’s processor registers and memory we have developed an extension of HP’s and AMD joint full system simulation environment, named COTSon. This extension allows the injection of faults that change a single bit in processor registers and memory of the simulated computer. The developed fault injection system makes it possible to: evaluate the effects of single bit flip transient faults in an application, analyze an application robustness against single bit flip transient faults and validate fault detection mechanism and strategies.

Anàlisi, disseny i construcció d'un robot educatiu basat en microcontrolador AVR-ATMEGA

Aquest projecte presenta el disseny, construcció i programació d’un robot autònom, com a base per una proposta educativa. Per aconseguir aquest objectiu s’ha dotat el robot d’una unitat de procés, un sistema de locomoció i un seguit de sensors que proporcionaran a la unitat informació respecte l’entorn. Per gestionar totes aquestes funcionalitats, s’ha fet servir un sistema operatiu en temps real capaç de gestionar amb efectivitat les tasques que puguin ser executades pel robot. Finalment, s’ha exposat una detallada descripció dels costos per una producció de volum mig i de caire merament educatiu.

Optimització i implementació en Simulink de l'adquisició d'un senyal GPS amb blocs FFT

Aquest projecte es tracta de la optimització i la implementació de l’etapa d’adquisició d’un receptor GPS. També inclou una revisió breu del sistema GPS i els seus principis de funcionament. El procés d’adquisició s’ha estudiat amb detall i programat en els entorns de treball Matlab i Simulink. El fet d’implementar aquesta etapa en dos entorns diferents ha estat molt útil tant de cara a l’aprenentatge com també per la comprovació dels resultats obtinguts. El principal objectiu del treball és el disseny d’un model Simulink que es capaç d’adquirir una senyal capturada amb hardware real. En realitat, s’han fet dues implementacions: una que utilitza blocs propis de Simulink i l’altra que utilitza blocs de la llibreria Xilinx. D’aquesta manera, posteriorment, es facilitaria la transició del model a la FPGA utilitzant l’entorn ISE de Xilinx. La implementació de l’etapa d’adquisició es basa en el mètode de cerca de fase de codi en paral·lel, el qual empra la operació correlació creuada mitjançant la transformada ràpida de Fourier (FFT). Per aquest procés es necessari realitzar dues transformades (per a la senyal entrant i el codi de referència) i una antitransformada de Fourier (per al resultat de la correlació). Per tal d’optimitzar el disseny s’utilitza un bloc FFT, ja que tres blocs consumeixen gran part dels recursos d’una FPGA. En lloc de replicar el bloc FFT, en el model el bloc és compartit en el temps gràcies a l’ús de buffers i commutadors, com a resultat la quantitat de recursos requerits per una implementació en una FPGA es podria reduir considerablement.

Development of an optimized methodology for tensile testing of carbon steels in hydrogen environment

The study was performed at OCAS, the Steel Research Centre of ArcelorMittal for the Industry market. The major aim of this research was to obtain an optimized tensile testing methodology with in-situ H-charging to reveal the hydrogen embrittlement in various high strength steels. The second aim of this study has been the mechanical characterization of the hydrogen effect on hight strength carbon steels with varying microstructure, i.e. ferrite-martensite and ferrite-bainite grades. The optimal parameters for H-charging - which influence the tensile test results (sample geometry type of electrolyte, charging methods effect of steel type, etc.) - were defined and applied to Slow Strain Rate testing, Incremental Step Loading and Constant Load Testing. To better understand the initiation and propagation of cracks during tensile testing with in-situ H-charging, and to make the correlation with crystallographic orientation, some materials have been analyzed in the SEM in combination with the EBSD technique. The introduction of a notch on the tensile samples permits to reach a significantly improved reproducibility of the results. Comparing the various steel grades reveals that Dual Phase (ferrite-martensite) steels are more sensitive to hydrogen induced cracking than the FB (ferritic-bainitic) ones. This higher sensitivity to hydrogen was found back in the reduced failure times, increased creep rates and enhanced crack initiation (SEM) for the Dual Phase steels in comparison with the FB steels.

Estudi energètic de les llars del barri de Haër (Senegal)

En el present estudi s’han analitzat quines són les fonts energètiques utilitzades a les llars de Haër, així com les repercussions que aquestes tenen sobre el medi natural i socioeconòmic de les famílies. Per tal de poder identificar quines són aquestes fonts i els seus efectes, s’ha realitzat un inventari i una diagnosi energètica. S’ha estudiat l’ús de l’energia en dos àmbits domèstics principals: la il·luminació i el cuinat, analitzant la freqüència d’ús i quantificant el consum energètic familiar. Les fonts energètiques detectades són: llenya, carbó, gas, querosè, piles i espelmes, de les quals, la llenya, el querosè i el carbó són les majoritàriament utilitzades. El consum energètic per càpita és de 2.100 kWh/any. Per altra banda, l’obtenció d’algunes d’aquestes fonts energètiques, suposen un cost econòmic molt elevat per les economies familiars, arribant a suposar un 60% dels ingressos. A partir de les dades obtingudes a la diagnosi, s’ha aplicat un indicador per tal de quantificar la magnitud de l’impacte sobre el medi produït pel model energètic seguit dins de les llars. L’indicador estudiat ha estat la petjada energètica, amb la qual s’ha traduït aquest consum en unitats de superfície biològicament productiva, requerida per absorbir el CO2 emès. El resultat ha estat que una persona produeix anualment 2,09·10-2 tCO2, que requereix de 7,53·10-3 gha/persona de superfície forestal per ser absorbides. S’ha comparat aquest resultat amb la petjada energètica domèstica calculada pel poble d’Araós, el qual, amb un model energètic totalment diferent, té una petjada energètica de 1,53 gha/persona. Un cop detectats els problemes o impactes causats pel model energètic actual, es proposa una alternativa energètica per tal de reemplaçar algunes fonts convencionals, principalment el querosè dels quinqués. Així doncs, mitjançant l’aprofitament de l’energia solar, es plantegen dos models fotovoltaics adaptats a dues tipologies de llars diferents, amb l’objectiu de minimitzar el cost i optimitzar els recursos energètics. Finalment es planteja una solució financera per abordar el cost inicial de la instal·lació solar.

Anàlisi ambiental de les platges de Sitges: evolució de la qualitat del litoral i estudi d'impactes

L’explosió del sector turístic experimentat en les costes catalanes des de principis dels anys 60 ha provocat un important impacte sobre el medi litoral català i el seu principal atractiu turístic, les platges. Sitges és un municipi annex a una important zona urbana (Barcelona), i s'ofereix com a indret de segona residència i ciutat de vacances, sobretot a l’estiu, incrementant fortament la pressió sobre el medi. L'objectiu principal d'aquest projecte ha estat estudiar les pertorbacions sobre alguns aspectes del sistema litoral Sitgetà: el perfil litoral i la dinàmica sedimentària, la qualitat microbiològica de les aigües i la sorra, els cabals d'aigües residuals tractades i els residus de les platges. A partir dels registres de neteja en platges, proposem el rebuig i envasos en sorra (concentració de residus, kg/m2) com a nou indicador de presència d’usuaris a les platges (usuaris/m2). La diagnosi realitzada indica que l'estat físic de les platges de Sitges respon a les actuacions en matèria d'obres marítimes en interacció amb les dinàmiques sedimentaries. Pel que fa als anàlisis microbiològics de l'aigua i la sorra trobem una situació regulada a excepció de pics provocats per pluges puntuals. Malauradament hem vist com es podrien potenciar el valors ambientals de totes les parts treballades si es fomentessin figures de protecció del medi, la regeneració d’espècies vegetals tan fora com dins de l'aigua i es garantís una gestió de l’aigua 100% eficient i sense causar intromissions en el desenvolupament dels ecosistemes.

Optimal coexistence of long-term and short-term contracts in labor Markets

We consider a market where firms hire workers to run their projects and such projects differ in profitability. At any period, each firm needs two workers to successfully run its project: a junior agent, with no specific skills, and a senior worker, whose effort is not verifiable. Senior workers differ in ability and their competence is revealed after they have worked as juniors in the market. We study the length of the contractual relationships between firms and workers in an environment where the matching between firms and workers is the result of market interaction. We show that, despite in a one-firm-one-worker set-up long-term contracts are the optimal choice for firms, market forces often induce firms to use short-term contracts. Unless the market only consists of firms with very profitable projects, firms operating highly profitable projects offer short-term contracts to ensure the service of high-ability workers and those with less lucrative projects also use short-term contracts to save on the junior workers' wage. Intermediate firms may (or may not) hire workers through long-term contracts.

Can You Home Again? Desertion and Control of Hometowns in Civil Wars

What allows an armed group in a civil war to prevent desertion? This paper addresses this question with a focus on control in the rearguard. Most past studies focus on motivations for desertion. They explain desertion in terms of where soldiers stand in relation to the macro themes of the war, or in terms of an inability to provide positive incentives to overcome the collective action problem. However, since individuals decide whether and how to participate in civil wars for multiple reasons, responding to a variety of local conditions in an environment of threat and violence, a focus only on macro-level motivations is incomplete. The opportunities side of the ledger deserves more attention. I therefore turn my attention to how control by an armed group eliminates soldiers’ opportunities to desert. In particular, I consider the control that an armed group maintains over soldiers’ hometowns, treating geographic terrain as an important exogenous indicator of the ease of control. Rough terrain at home affords soldiers and their families and friends advantages in ease of hiding, the difficulty of using force, and local knowledge. Based on an original dataset of soldiers from Santander Province in the Spanish Civil War, gathered from archival sources, I find statistical evidence that the rougher the terrain in a soldier’s home municipality, the more likely he is to desert. I find complementary qualitative evidence indicating that soldiers from rough-terrain communities took active advantage of their greater opportunities for evasion. This finding has important implications for the way observers interpret different soldiers’ decisions to desert or remain fighting, for the prospect that structural factors may shape the cohesion of armed groups, and for the possibility that local knowledge may be a double-edged sword, making soldiers simultaneously good at fighting and good at deserting.

Gestió de projectes informàtics

Aquesta aplicació es l¿evolució d¿un programa existent, realitzat amb una base de dades d¿escriptori amb capacitats de programació i creació d¿interfícies d¿usuari, que per executar-la cal una llicencia i que ha de funcionar sobre un sistema operatiu privatiu (també amb llicencia). Evoluciona cap a un entorn realitzat sobre programari lliure, que funciona sobre qualsevol sistema operatiu i no es necessari pagar cap llicencia per a fer-lo servir, ni en la part servidora ni en la part client.

Desenvolupament d'un analitzador de xarxa (SNIFFER)

Desenvolupament d'un sniffer propi que capturarà el trànsit de la xarxa i es podrà analitzar. Per a això es generarà un entorn gràfic tant per a la captura com l'anàlisi final, obtenint percentatge de dades i tipus de paquets capturats