Saturació tenar d’oxigen (StO2) mesurada de forma no invasiva mitjançant l’espectroscòpia (NIRS) durant la prova de respiració espontània com a predictor d’èxit de la retirada de la ventilació mecànica.

Es tracta d’un estudi unicèntric prospectiu amb 30 pacients sotmesos a ventilació mecànica i considerats candidats a la retirada del suport ventilatori per part del seu equip mèdic assistencial. L’objectiu de l’estudi és determinar si els canvis de la saturació tenar d’oxigen (StO2), així com les corves de desoxigenació i reoxigenació de StO2 derivades d’una maniobra d’isquèmia vascular transitòria, mesurades de forma no invasiva mitjançant l’espectroscòpia en el límit de la llum infrarroja (Near Infra Red Spectroscopy - NIRS), són útils com a predictors del fracàs de l’extubació en el procés de retirada de la ventilació mecànica.

Physico-chemical analysis of Albian (Lower Cretaceous) amber from San Just (Spain): implications for palaeoenvironmental and palaeoecological studies.

Amber from a Lower Cretaceous outcrop at San Just, located in the Eastern Iberian Peninsula (Escucha Formation, Maestrat Basin), was investigated to evaluate its physico-chemical properties. Thermogravimetric (TG) and Differential Thermogravimetric (DTG) analyses, infra-red spectroscopy, elemental and C-isotope analyses were performed. Physico-chemical differences between the internal light nuclei and the peripheral darker portions of San Just amber can be attributed to processes of diagenetic alteration that preferentially took place in the external amber border colonized by microorganisms (fungi or bacteria) when the resin was still liquid or slightly polymerized. δ13Camber values of different pieces of the same sample, from the nucleus to the external part, are remarkably homogeneous, as are δ13Camber values of the darker peripheral portions and lighter inner parts of the same samples. Hence, neither invasive microorganisms, nor diagenetic alteration, changed the bulk isotopic composition of the amber. δ13C values of different amber samples range from -21.1 to -24 , as expected for C3 plant-derived material. C-isotope analysis, coupled to palaeobotanical, TG and DTG data and infra-red spectra, suggests that San Just amber was exuded by only one conifer species, belonging to either the Cheirolepidiaceae or Aracauriaceae, coniferous families probably living under stable palaeoenvironmental and palaeoecological conditions.

Testing low-altitude infrared digital photography from a mini-UAV to retrieve information for biological conservation

Satellite remote sensing imagery is used for forestry, conservation and environmental applications, but insufficient spatial resolution, and, in particular, unavailability of images at the precise timing required for a given application, often prevent achieving a fully operational stage. Airborne remote sensing has the advantage of custom-tuned sensors, resolution and timing, but its price prevents using it as a routine technique for the mentioned fields. Some Unmanned Aerial Vehicles might provide a “third way” solution as low-cost techniques for acquiring remotely sensed information, under close control of the end-user, albeit at the expense of lower quality instrumentation and instability. This report evaluates a light remote sensing system based on a remotely-controlled mini-UAV (ATMOS-3) equipped with a color infra-red camera (VEGCAM-1) designed and operated by CATUAV. We conducted a testing mission over a Mediterranean landscape dominated by an evergreen woodland of Aleppo pine (Pinus halepensis) and (Holm) oak (Quercus ilex) in the Montseny National Park (Catalonia, NE Spain). We took advantage of state-of-the-art ortho-rectified digital aerial imagery (acquired by the Institut Cartogràfic de Catalunya over the area during the previous year) and used it as quality reference. In particular, we paid attention to: 1) Operationality of flight and image acquisition according to a previously defined plan; 2) Radiometric and geometric quality of the images; and 3) Operational use of the images in the context of applications. We conclude that the system has achieved an operational stage regarding flight activities, although with meteorological limits set by wind speed and turbulence. Appropriate landing areas can be sometimes limiting also, but the system is able to land on small and relatively rough terrains such as patches of grassland or short matorral, and we have operated the UAV as far as 7 km from the control unit. Radiometric quality is sufficient for interactive analysis, but probably insufficient for automated processing. A forthcoming camera is supposed to greatly improve radiometric quality and consistency. Conventional GPS positioning through time synchronization provides coarse orientation of the images, with no roll information.

Technologies de procédé et de contrôle pour réduire la teneur en sel du jambon sec et des saucissons

Dans certains pays européens, les produits carnés élaborés peuvent représenter près de 20% de la consommation journalière de sodium. De ce fait, les industries de la viande tentent de réduire la teneur en sel dans les produits carnés pour répondre, d’une part aux attentes des consommateurs et d’autre part aux demandes des autorités sanitaires. Le système Quick‐Dry‐Slice process (QDS®), couplé avec l’utilisation de sels substituant le chlorure de sodium (NaCl), a permis de fabriquer, avec succès, des saucisses fermentées à basse teneur en sel en réduisant le cycle de fabrication et sans ajout de NaCl supplémentaire. Les technologies de mesure en ligne non destructives, comme les rayons X et l’induction électromagnétique, permettent de classifier les jambons frais suivant leur teneur en gras, un paramètre crucial pour adapter la durée de l’étape de salaison. La technologie des rayons X peut aussi être utilisée pour estimer la quantité de sel incorporée pendant la salaison. L’information relative aux teneurs en sel et en gras est importante pour optimiser le processus d’élaboration du jambon sec en réduisant la variabilité de la teneur en sel entre les lots et dans un même lot, mais aussi pour réduire la teneur en sel du produit final. D’autres technologies comme la spectroscopie en proche infrarouge (NIRS) ou spectroscopie microondes sont aussi utiles pour contrôler le processus d’élaboration et pour caractériser et classifier les produits carnés élaborés, selon leur teneur en sel. La plupart de ces technologies peuvent être facilement appliquées en ligne dans l’industrie afin de contrôler le processus de fabrication et d’obtenir ainsi des produits carnés présentant les caractéristiques recherchées.

Use of NIR spectroscopy and multivariate process spectra calibration methodology for pharmaceutical solid samples analysis

Accomplish high quality of final products in pharmaceutical industry is a challenge that requires the control and supervision of all the manufacturing steps. This request created the necessity of developing fast and accurate analytical methods. Near infrared spectroscopy together with chemometrics, fulfill this growing demand. The high speed providing relevant information and the versatility of its application to different types of samples lead these combined techniques as one of the most appropriated. This study is focused on the development of a calibration model able to determine amounts of API from industrial granulates using NIR, chemometrics and process spectra methodology.

X-ray photoelectron spectroscopy analysis of ion¿beam¿induced oxidation of GaAs and AlGaAs

The oxidation of GaAs and AlGaAs targets subjected to O2+ bombardment has been analyzed, using in situ x¿ray photoelectron spectroscopy, as a function of time until steady state is reached. The oxides formed by the O2+ bombardment have been characterized in terms of composition and binding energy. A strong energy and angular dependence for the oxidation of As relative to Ga is found. Low energies as well as near normal angles of incidence favor the oxidation of As. The difference between Ga and As can be explained in terms of the formation enthalpy for the oxide and the excess supply of oxygen. In an AlGaAs target the Al is very quickly completely oxidized irrespective of the experimental conditions. The steady state composition of the altered layers show in all cases a preferential removal of As.

Analysis of the near-intrinsic and extrinsic photocapacitance due to the EL2 level in boron implanted GaAs

A detailed analysis of the photocapacitance signal at the near‐band and extrinsic energetic ranges in Schottky barriers obtained on horizontal Bridgman GaAs wafers, which were implanted with boron at different doses and annealed at several temperatures, has been carried out by using the optical isothermal transient spectroscopy, OITS. The optical cross sections have been determined as well as the quenching efficiency of the EL2 level which has been found to be independent of the annealing temperature. Moreover, the quenching relaxation presents two significant features: (i) a strong increase of the quenching efficiency from 1.35 eV on and (ii) a diminution of the quenching transient amplitude in relation with that shown by the fundamental EL2 level. In order to explain this behavior, different cases are discussed assuming the presence of several energy levels, the existence of an optical recuperation, or the association of the EL2 trap with two levels located, respectively, at Ev+0.45 eV and Ec−0.75 eV. The theoretical simulation, taking into account these two last cases, is in agreement with the experimental photocapacitance data at low temperature, as well as at room temperature where the EL2 filling phototransient shows an anomalous behavior. Moreover, unlike the previous data reported for the EL2 electron optical cross section, the values found using our experimental technique are in agreement with the behavior deduced from the theoretical calculation. The utilization of the OITS method has also allowed the determination of another level, whose faster optical contribution is often added to that of the EL2 level when the DLOS or standard photocapacitance is used.

Prediction of crude protein and classification of the growth stage of wheat plant samples from NIR spectra

Near-infrared spectroscopy (NIRS) was used to analyse the crude protein content of dried and milled samples of wheat and to discriminate samples according to their stage of growth. A calibration set of 72 samples from three growth stages of wheat (tillering, heading and harvest) and a validation set of 28 samples was collected for this purpose. Principal components analysis (PCA) of the calibration set discriminated groups of samples according to the growth stage of the wheat. Based on these differences, a classification procedure (SIMCA) showed a very accurate classification of the validation set samples : all of them were successfully classified in each group using this procedure when both the residual and the leverage were used in the classification criteria. Looking only at the residuals all the samples were also correctly classified except one of tillering stage that was assigned to both tillering and heading stages. Finally, the determination of the crude protein content of these samples was considered in two ways: building up a global model for all the growth stages, and building up local models for each stage, separately. The best prediction results for crude protein were obtained using a global model for samples in the two first growth stages (tillering and heading), and using a local model for the harvest stage samples.

3D kinematics of the near-IR HH 223 outflow in L723

In this work, we derive the full 3D kinematics of the near-infrared outflow HH 223, located in the dark cloud Lynds 723 (L723), where a well-defined quadrupolar CO outflow is found. HH 223 appears projected on to the two lobes of the eastwest CO outflow. The radio continuum source VLA 2, towards the centre of the CO outflow, harbours a multiple system of low-mass young stellar objects. One of the components has been proposed to be the exciting source of the eastwest CO outflow. From the analysis of the kinematics, we get further evidence on the relationship between the near-infrared and CO outflows and on the location of their exciting source. The proper motions were derived using multi-epoch, narrow-band H2 (2.122 μm line) images. Radial velocities were derived from the 2.122 μm line of the spectra. Because of the extended (∼5 arcmin), S-shaped morphology of the target, the spectra were obtained with the multi-object-spectroscopy (MOS) observing mode using the instrument Long-Slit Intermediate Resolution Infrared Spectrograph (LIRIS) at the 4.2 m William Herschel Telescope. To our knowledge, this work is the first time that MOS observing mode has been successfully used in the near-infrared range for an extended target.

Periodic orbits near a heteroclinic loop formed by one dimensional orbit and a 2-dimensional manifold: application to the charged collinear 3-body problem

The paper is devoted to the study of a type of differential systems which appear usually in the study of some Hamiltonian systems with 2 degrees of freedom. We prove the existence of infinitely many periodic orbits on each negative energy level. All these periodic orbits pass near the total collision. Finally we apply these results to study the existence of periodic orbits in the charged collinear 3–body problem.

Barcelona, metropolis policentrica en red

La organización de la producción en el espacio se asocia con el crecimiento y el desarrollo económico. En esta investigación se propone el estudio de las relaciones entre Barcelona y los municipios de su sistema urbano desde tres niveles del análisis: el área metropolitana, la región metropolitana policéntrica, y la red de ciudades. El estudio del área metropolitana permite comprobar el cambio de extensión de la metrópolis de Barcelona, la dirección de la expansión y la creciente integración con otras áreas urbanas de Cataluña. El análisis interno del área metropolitana nos permite comprobar que a pesar del gran peso específico del municipio de Barcelona, el sistema urbano es policéntrico. El incremento en extensión de la metrópolis se debe a la expansión conjunta de la interacción con Barcelona y con un conjunto de ciudades de antigua tradición industrial. Las áreas de influencia de todos estos subcentros se entrelazan al expandirse, formado una región metropolitana policéntrica. Finalmente, la aplicación al análisis de las teorías de redes de ciudades permite identificar un sistema urbano en el que coexisten relaciones jerárquicas con no jerárquicas, y en el que se generan relaciones de complementariedad y sinergia. El análisis de las redes de ciudades en clave de economía del conocimiento permite deducir la dependencia en la transmisión de información y conocimiento tanto de las redes verticales como de las horizontales. Posteriores estudios deben encaminarse a cuantificar los efectos de la estructura urbana sobre la productividad y la utilidad.

Determinación in vitro de la digestibilidad de los nutrientes de la cebada. Aplicación práctica para calibración de un sistema NIRS, y para la utilización de enzimas en la alimentación porcina.

La intensificación de la producción porcina, sin duda es uno de los principales factores que han influido en la alta competitividad del sector. Dicha intensificación sin embargo debe enfrentarse a nuevos retos de acuerdo con la creciente preocupación de los estados europeos sobre problemas de bienestar animal y de contaminación medioambiental resultante de la producción animal intensiva. La excreción de nitrógeno en los purines (que es uno de los principales factores contaminantes), puede ser reducida substancialmente si se reduce el contenido proteico del pienso. Ello, sin embargo debe de hacerse de manera que la dieta aporte las cantidades mínimas de aminoácidos requeridas por los animales, y que por tanto los parámetros productivos no se vean afectados. Para asegurar un aporte mínimo adecuado de aminoácidos en el pienso, es esencial un conocimiento preciso del valor nutritivo de las materias primas utilizadas. En la actualidad se utilizan los valores de contenido en aminoácidos digestibles ileales presentes en tablas publicadas por diferentes fuentes de información. Dichas tablas, sin embargo, son valores medios que no contemplan la elevada variabilidad en el contenido de aminoácidos digestibles dentro de una misma materia prima. Debido a esta variabilidad, para asegurar que los requerimientos de aminoácidos queden cubiertos al menos en un 80% de los casos, se debe sobreformular a un 107-108% de los requerimientos. Se ha estimado que una rápida determinación del contenido de aminoácidos digestibles ileales en las materias primas mediante la utilización de espectroscopia del infrarojo cercano (NIRS), permitiría el conocimiento del valor nutritivo de cada partida de materia prima, y una reducción de la sobreformulación a un 103%, con el consiguiente beneficio medioambiental. El principal inconveniente, para la aplicación de dicha metodología NIRS, es que su calibración requiere un esfuerzo excepcional, que solamente puede conseguirse con el trabajo de varios años de determinaciones in vivo de digestibilidad ileal de aminoácidos de un elevadísimo número de muestras. El presente proyecto tenía como principal objetivo la puesta a punto de una técnica de digestibilidad ileal de nutrientes in vitro (validada con determinaciones in vivo), que nos permitiera un análisis más rápido de un número elevado de muestras para realizar la calibración del NIRS. Para ello se escogió la cebada como materia prima para realizar los estudios por su importancia económica en España.

Why Catalonia will see its energy metabolism increase in the near future: an application of MuSIASEM

This paper applies the so-called Multi-Scale Integrated Analysis of Societal and Ecosystem Metabolism (MuSIASEM) to the economy of the Spanish region of Catalonia. By applying Georgescu-Roegen's fund-flow model, it arrives at the conclusion that within a context of the end of cheap oil, the current development model based on the growth of low productivity sectors such as services and construction must change. The change is needed not only because of the increasing scarcity of affordable energy carriers, or because of the increasing environmental impact that the present development represents, but also because of an ageing population that demands labour productivity gains. This will imply industry requiring more energy consumption per worker in order to increase its productivity, and therefore its competitiveness. Thus, we conclude that energy intensity, and exosomatic energy metabolism of Catalonia will increase dramatically in the near future unless major conservation efforts are implemented in both the household and transport sectors.

Despliegue y análisis de la cobertura de una red WiMAX basada en IEEE 802.16-2004

Aquest projecte tracta de l’estudi de la cobertura WiMAX basada en la variant 802.16-2004 en la que opera a 3.5 GHz en diferents escenaris d’un campus universitari. Primerament es realitza una introducció general a WiMAX i es defineixen els equips utilitzats. Posteriorment es comença a dur a terme un estudi de la cobertura WiMAX en diferents escenaris: indoor y outdoor per tal de poder extreure models empírics simplificats de path loss a partir de mesures realitzades amb els terminals WiMAX. Per últim, s’introdueix al projecte InterRural del Ministeri d'Indústria, Turisme i Comerç dut a terme durant els mesos Octubre 2007 - Març 2008 amb altres empreses col·laboradores: Telefònica, Hispasat, Gigle i Iber-X. La finalitat del projecte InterRural és comparar diferents tecnologies wireless de banda ample com alternatives per un bucle local ràdio de la última milla. En concret es comparen experimentalment les tecnologies WiMAX i WiFI 802.11a en diferents escenaris: LOS i NLOS.

Arquitectura corporativa de web services

Este proyecto consiste en la realización de un sistema informático que se encargue de ampliar la red comercial de una compañía de seguros a través de Internet. Para ello se utiliza la tecnología de web services, que nos permite efectuar transacciones de datos de manera rápida, fiable y segura. El web service que se ha diseñado se encarga de resolver y dar respuesta tanto a peticiones de solicitud de precios como de emisión de pólizas en varios ramos. El objetivo es ofrecer al cliente final un método sencillo y próximo de cotización y emisión de seguros.