Student modeling based on fuzzy inference mechanisms

The paper presents a competence-based instructional design system and a way to provide a personalization of navigation in the course content. The navigation aid tool builds on the competence graph and the student model, which includes the elements of uncertainty in the assessment of students. An individualized navigation graph is constructed for each student, suggesting the competences the student is more prepared to study. We use fuzzy set theory for dealing with uncertainty. The marks of the assessment tests are transformed into linguistic terms and used for assigning values to linguistic variables. For each competence, the level of difficulty and the level of knowing its prerequisites are calculated based on the assessment marks. Using these linguistic variables and approximate reasoning (fuzzy IF-THEN rules), a crisp category is assigned to each competence regarding its level of recommendation.

Discontinuous Galerkin methods for the Multi-dimensional Vlasov-Poisson problem

We introduce and analyze two new semi-discrete numerical methods for the multi-dimensional Vlasov-Poisson system. The schemes are constructed by combing a discontinuous Galerkin approximation to the Vlasov equation together with a mixed finite element method for the Poisson problem. We show optimal error estimates in the case of smooth compactly supported initial data. We propose a scheme that preserves the total energy of the system.

A Gradient based algorithm for blind inversion of Wiener System using multi-variate score functions

A Wiener system is a linear time-invariant filter, followed by an invertible nonlinear distortion. Assuming that the input signal is an independent and identically distributed (iid) sequence, we propose an algorithm for estimating the input signal only by observing the output of the Wiener system. The algorithm is based on minimizing the mutual information of the output samples, by means of a steepest descent gradient approach.

Economic impacts of alternative water policy scenarios in the Spanish production system: an input-output analysis

The objective of this paper is to analyse the economic impacts of alternative water policies implemented in the Spanish production system. The methodology uses two versions of the input-output price model: a competitive formulation and a mark-up formulation. The input-output framework evaluates the impact of water policy measures on production prices, consumption prices, intermediate water demand and private welfare. Our results show that a tax on the water used by sectors considerably reduces the intermediate water demand, and increases the production and consumption prices. On the other hand, according to Jevons' paradox, an improvement in technical efficiency, which leads to a reduction in the water requirements of all sectors and an increase in water production, increases the amount of water consumed. The combination of a tax on water and improved technical efficiency takes the pressure off prices and significantly reduces intermediate water demand. JEL Classification: C67 ; D57 ; Q25. Keywords: Production prices; Consumption prices; Water uses; Water policy; Water taxation.

Economic impact of alternative policy measures implemented on the energy activities of the Catalan production system: an input-output analysis

The aim of the paper is to analyse the economic impact of alternative policies implemented on the energy activities of the Catalan production system. Specifically, we analyse the effects of a tax on intermediate energy uses, a reduction in the final production of energy, and a reduction in intermediate energy uses. The methodology involves two versions of the input-output price model: a competitive price formulation and a mark-up price formulation. The input-output price framework will make it possible to evaluate how the alternative measures modify production prices, consumption prices, private welfare, and intermediate energy uses. The empirical application is for the Catalan economy and uses economic data for the year 2001.

Análisis multi-región input-output (MRIO) de emisiones de gases efecto invernadero (GEI) incorporado en el comercio. Un modelo birregional aplicado a Cataluña y el resto de España

El siguiente trabajo realiza un análisis regional y sectorial para el estudio de la emisiones de gases efecto invernadero (GEI) incorporadas en el comercio entre las regiones de Cataluña y el resto de España para el año 2001, estimando así el Balance Neto en GEI incorporado. El objetivo es el desarrollo de un metodología que nos permita realizar esta estimación de forma rigurosa, con la intención de efectuar un análisis comparativo de ambas estructuras productivas territoriales, en cuanto a la intensidad de emisión y el impacto de la demanda final de las regiones consideradas. Para este propósito se utiliza el marco metodológico del análisis input-output, en particular se aplica dos tipologías de modelos: el modelo básico o single-región y el multi-región, lo que nos permite la comparabilidad entre ambos, demostrando como el modelo MRIO (multi-región input-output) es el método más apropiado para dicho propósito, permitiendo, entre otras ventajas, analizar los vínculos interregionales e intersectoriales de las regiones consideradas. La incorporación de la técnica de la integración vertical o subsistemas, nos permite un enfoque alternativo para el Balance Neto resultante, no tenemos constancia de que este enfoque haya sido utilizado con anterioridad en los análisis MRIO aplicados al estudio de los impactos medioambientales incorporados en el comercio. Tampoco la tenemos sobre la aplicación de los MRIO de forma general para estos impactos a nivel interregional de la economía española. El principal resultado obtenido nos indica que aún teniendo Cataluña un importante superávit comercial con el resto de España, hemos comprobado la existencia de un importante déficit para la primera en cuanto a la polución incorporada en este comercio.

Construcción de un modelo Multi- Regional Input-Output (MRIO) medioambiental para Cataluña y el resto de España: Estudio del balance en CO2 incorporado en el comercio

El objetivo de este estudio es analizar el impacto, en emisiones de CO2, de la demanda final de Cataluña en relación a los vínculos comerciales interregionales con el resto de España y el resto del mundo. Este proceso implica el análisis del balance en CO2 incorporado para Cataluña, lo que permitirá evaluar la responsabilidad de la economía catalana respecto a estas emisiones. Para este propósito se construye, para esta determinada desagregación regional, un modelo Multi-Regional Input-Output (MRIO) extendido al medioambiente con sectores verticalmente integrados. La incorporación de la técnica de la integración vertical nos permite un enfoque alternativo para el Balance Neto y un análisis más detallado de los vínculos interregionales entre los diversos sectores productivos, centrado en la responsabilidad última de la demanda final de cada sector en cada región. Hasta el momento, los estudios previos sobre los impactos medioambientales incorporados al comercio español se han centrado principalmente en el ámbito nacional. No obstante, por un lado el comercio interregional con el resto de España en términos monetarios representa cerca de la mitad del comercio exterior catalán. Por otro lado, los distintos metabolismos energéticos de ambas economías tienen como consecuencia una importante diferencia en la intensidad de emisión en la producción de bienes y servicios. Esta situación genera para Cataluña un déficit en el Balance Neto estimado con el resto de España, aún teniendo un importante superávit monetario. De esto se desprende la importancia de integrar el nivel interregional en los estudios de los impactos medioambientales incorporados en el comercio y, en consecuencia, en la planificación y formalización de políticas económicas y ambientales a nivel nacional.

Capacity-achieving input covariance for single-user multi-antenna channels

We characterize the capacity-achieving input covariance for multi-antenna channels known instantaneously at the receiver and in distribution at the transmitter. Our characterization, valid for arbitrary numbers of antennas, encompasses both the eigenvectors and the eigenvalues. The eigenvectors are found for zero-mean channels with arbitrary fading profiles and a wide range of correlation and keyhole structures. For the eigenvalues, in turn, we present necessary and sufficient conditions as well as an iterative algorithm that exhibits remarkable properties: universal applicability, robustness and rapid convergence. In addition, we identify channel structures for which an isotropic input achieves capacity.

Large-system analysis of a CDMA dynamic channel under a Markovian input process

We study the minimum mean square error (MMSE) and the multiuser efficiency η of large dynamic multiple access communication systems in which optimal multiuser detection is performed at the receiver as the number and the identities of active users is allowed to change at each transmission time. The system dynamics are ruled by a Markov model describing the evolution of the channel occupancy and a large-system analysis is performed when the number of observations grow large. Starting on the equivalent scalar channel and the fixed-point equation tying multiuser efficiency and MMSE, we extend it to the case of a dynamic channel, and derive lower and upper bounds for the MMSE (and, thus, for η as well) holding true in the limit of large signal–to–noise ratios and increasingly large observation time T.

Exact representation of antenna system diversity performance from input parameter description

A simplc formulation Io compute thc envelope correlation of anantenna divemiry system is dcrired. 11 is shown how to compute theenvelope correlation hom the S-parameter descnplian of the antennasystem. This approach has the advantage that i t does not require thecomputation nor the measurement of the radiation panem of theantenna system. It also offers the advantage of providing a clcaunderstanding ofthe effects ofmutual coupling and input match on thediversity performance of the antcnnii system.

Identifying strategies for mitigating the global warming impact of the EU-25 economy using a multi-objective input-output approach

Global warming mitigation has recently become a priority worldwide. A large body of literature dealing with energy related problems has focused on reducing greenhouse gases emissions at an engineering scale. In contrast, the minimization of climate change at a wider macroeconomic level has so far received much less attention. We investigate here the issue of how to mitigate global warming by performing changes in an economy. To this end, we make use of a systematic tool that combines three methods: linear programming, environmentally extended input output models, and life cycle assessment principles. The problem of identifying key economic sectors that contribute significantly to global warming is posed in mathematical terms as a bi criteria linear program that seeks to optimize simultaneously the total economic output and the total life cycle CO2 emissions. We have applied this approach to the European Union economy, finding that significant reductions in global warming potential can be attained by regulating specific economic sectors. Our tool is intended to aid policymakers in the design of more effective public policies for achieving the environmental and economic targets sought.

Pharmaceuticals occurrence in a WWTP with significant industrial contribution and its input into the river system

Occurrence and removal of 81 representative Pharmaceutical Active Compounds (PhACs) were assessed in a municipal WWTP located in a highly industrialized area, with partial water reuse after UV tertiary treatment and discharge to a Mediterranean river. Water monitoring was performed in an integrated way at different points in the WWTP and river along three seasons. Consistent differences between therapeutic classes were observed in terms of influent concentration, removal efficiencies and seasonal variation. Conventional (primary and secondary) treatment was unable to completely remove numerous compounds and UV-based tertiary treatment played a complementary role for some of them. Industrial activity influence was highlighted in terms of PhACs presence and seasonal distribution. Even if global WWTP effluent impact on the studied river appeared to be minor, PhACs resulted widespread pollutants in river waters. Contamination can be particularly critical in summer in water scarcity areas, when water flow decreases considerably

Social Presence Approach Within the Question and Answering eLearning Model: An Experiment with a Multi-Agent System

The model of Questions Answering (Q&A) for eLearning is based on collaborative learning through questions that are posed by students and their answers to that questions which are given by peers, in contrast with the classical model in which students ask questions to the teacher only. In this proposal we extend the Q&A model including the social presence concept and a quantitative measure of it is proposed; besides it is considered the evolution of the resulting Q&A social network after the inclusion of the social presence and taking into account the feedback on questions posed by students and answered by peers. The social network behaviorwas simulated using a Multi-Agent System to compare the proposed social presence model with the classical and the Q&A models

Social Multi-Criteria Evaluation (SMCE)

The main argument developed here is the proposal of the concept of “Social Multi-Criteria Evaluation” (SMCE) as a possible useful framework for the application of social choice to the difficult policy problems of our Millennium, where, as stated by Funtowicz and Ravetz, “facts are uncertain, values in dispute, stakes high and decisions urgent”. This paper starts from the following main questions: 1. Why “Social” Multi-criteria Evaluation? 2. How such an approach should be developed? The foundations of SMCE are set up by referring to concepts coming from complex system theory and philosophy, such as reflexive complexity, post-normal science and incommensurability. To give some operational guidelines on the application of SMCE basic questions to be answered are: 1. How is it possible to deal with technical incommensurability? 2. How can we deal with the issue of social incommensurability? To answer these questions, by using theoretical considerations and lessons learned from realworld case studies, is the main objective of the present article.

Towards an emotion-driven interactive music system: ridging the gaps between affect, physiology and sound generation

Report for the scientific sojourn at the Stanford University from January until June 2007. Music is well known for affecting human emotional states, yet the relationship between specific musical parameters and emotional responses is still not clear. With the advent of new human-computer interaction (HCI) technologies, it is now possible to derive emotion-related information from physiological data and use it as an input to interactive music systems. Providing such implicit musical HCI will be highly relevant for a number of applications including music therapy, diagnosis, nteractive gaming, and physiologically-based musical instruments. A key question in such physiology-based compositions is how sound synthesis parameters can be mapped to emotional states of valence and arousal. We used both verbal and heart rate responses to evaluate the affective power of five musical parameters. Our results show that a significant correlation exists between heart rate and the subjective evaluation of well-defined musical parameters. Brightness and loudness showed to be arousing parameters on subjective scale while harmonicity and even partial attenuation factor resulted in heart rate changes typically associated to valence. This demonstrates that a rational approach to designing emotion-driven music systems for our public installations and music therapy applications is possible.