Manipulator control board

The Mechatronics Research Centre (MRC) owns a small scale robot manipulator called aMini-Mover 5. This robot arm is a microprocessor-controlled, six-jointed mechanical armdesigned to provide an unusual combination of dexterity and low cost.The Mini-Mover-5 is operated by a number of stepper motors and is controlled by a PCparallel port via a discrete logic board. The manipulator also has an impoverished array ofsensors.This project requires that a new control board and suitable software be designed to allow themanipulator to be controlled from a PC. The control board will also provide a mechanism forthe values measured using some sensors to be returned to the PC.On this project I will consider: stepper motor control requirements, sensor technologies,power requirements, USB protocols, USB hardware and software development and controlrequirements (e.g. sample rates).In this report we will have a look at robots history and background, as well as we willconcentrate how stepper motors and parallel port work

Micro-Raman study of stress distribution in local isolation structures and correlation with transmission electron microscopy

Stress in local isolation structures is studied by micro‐Raman spectroscopy. The results are correlated with predictions of an analytical model for the stress distribution and with cross‐sectional transmission electron microscopy observations. The measurements are performed on structures on which the Si3N4 oxidation mask is still present. The influence of the pitch of the periodic local isolation pattern, consisting of parallel lines, the thickness of the mask, and the length of the bird"s beak on the stress distribution are studied. It is found that compressive stress is present in the Si substrate under the center of the oxidation mask lines, with a magnitude dependent on the width of the lines. Large tensile stress is concentrated under the bird"s beak and is found to increase with decreasing length of the bird"s beak and with increasing thickness of the Si3N4 film.

User-friendly parallel computations with econometric examples

This paper shows how a high level matrix programming language may be used to perform Monte Carlo simulation, bootstrapping, estimation by maximum likelihood and GMM, and kernel regression in parallel on symmetric multiprocessor computers or clusters of workstations. The implementation of parallelization is done in a way such that an investigator may use the programs without any knowledge of parallel programming. A bootable CD that allows rapid creation of a cluster for parallel computing is introduced. Examples show that parallelization can lead to important reductions in computational time. Detailed discussion of how the Monte Carlo problem was parallelized is included as an example for learning to write parallel programs for Octave.

ParallelKnoppix - Rapid deployment of a linux cluster for MPI parallel processing using non-dedicated computers

This note describes ParallelKnoppix, a bootable CD that allows creation of a Linux cluster in very little time. An experienced user can create a cluster ready to execute MPI programs in less than 10 minutes. The computers used may be heterogeneous machines, of the IA-32 architecture. When the cluster is shut down, all machines except one are in their original state, and the last can be returned to its original state by deleting a directory. The system thus provides a means of using non-dedicated computers to create a cluster. An example session is documented.

Parallel spinors on pseudo-riemannian spin(q) manifolds

We study simply-connected irreducible non-locally symmetric pseudo-Riemannian Spin(q) manifolds admitting parallel quaternionic spinors.

Including the workload effect in the parallel program signature

Performance prediction and application behavior modeling have been the subject of exten- sive research that aim to estimate applications performance with an acceptable precision. A novel approach to predict the performance of parallel applications is based in the con- cept of Parallel Application Signatures that consists in extract an application most relevant parts (phases) and the number of times they repeat (weights). Executing these phases in a target machine and multiplying its exeuction time by its weight an estimation of the application total execution time can be made. One of the problems is that the performance of an application depends on the program workload. Every type of workload affects differently how an application performs in a given system and so affects the signature execution time. Since the workloads used in most scientific parallel applications have dimensions and data ranges well known and the behavior of these applications are mostly deterministic, a model of how the programs workload affect its performance can be obtained. We create a new methodology to model how a program’s workload affect the parallel application signature. Using regression analysis we are able to generalize each phase time execution and weight function to predict an application performance in a target system for any type of workload within predefined range. We validate our methodology using a synthetic program, benchmarks applications and well known real scientific applications.

Proposal of a parallel architecture for a motion detection algorithm

This paper proposes a parallel architecture for estimation of the motion of an underwater robot. It is well known that image processing requires a huge amount of computation, mainly at low-level processing where the algorithms are dealing with a great number of data. In a motion estimation algorithm, correspondences between two images have to be solved at the low level. In the underwater imaging, normalised correlation can be a solution in the presence of non-uniform illumination. Due to its regular processing scheme, parallel implementation of the correspondence problem can be an adequate approach to reduce the computation time. Taking into consideration the complexity of the normalised correlation criteria, a new approach using parallel organisation of every processor from the architecture is proposed

Plane-to-plane positioning from image-based visual servoing and structured light

In this paper we face the problem of positioning a camera attached to the end-effector of a robotic manipulator so that it gets parallel to a planar object. Such problem has been treated for a long time in visual servoing. Our approach is based on linking to the camera several laser pointers so that its configuration is aimed to produce a suitable set of visual features. The aim of using structured light is not only for easing the image processing and to allow low-textured objects to be treated, but also for producing a control scheme with nice properties like decoupling, stability, well conditioning and good camera trajectory

Diseño y fabricación de micro/nanochips para identificación y actuación en células vivas

Este estudio abarca el diseño, desarrollo tecnológico y fabricación, mediante la utilización de tecnologías de Micro y Nanosistemas, de herramientas en el orden de las micras y los nanómetros. Estos dispositivos serán utilizados en el estudio, identificación e interactuación con células vivas, ya que sus pequeñas dimensiones los hacen idóneos para su aplicación en el campo de la Biología Celular. Estas micro y nanoherramientas pueden usarse para el estudio, identificación o actuación de células vivas desde el exterior. Pero también pueden ser microinyectadas, lipofectadas o fagocitadas por parte de la misma célula, y de esta manera hacer estudios o actuar de forma intracelular.

Síntesi i caracterització de micro- i nanoestructures de compostos fotoactius de perilendiimida

En el present treball de recerca s’ha portat a terme la síntesi i caracterització de fibres a escala micro- i nanomètrica mitjançant l’auto-assemblatge dels compostos 1 i 2. Aquests compostos estan formats per una unitat de perilendiimida (PI) i una unitat d’estilbè i, en base a estudis previs desenvolupats al nostre grup de recerca, haurien de comportar-se com a sistemes acceptor-donador d’electrons fotoinduïts. Per tant, les corresponents estructures obtingudes podrien presentar activitat fotovoltaica. En primer lloc, s’ha abordat la síntesi dels compostos 1 i 2, seguint la metodologia posada a punt prèviament al nostre grup de recerca. A continuació, s’han estudiat les propietats òptiques de 1 i 2 en dissolució, la qual cosa ha permès establir que: (a) tal i com es pretenia, tots dos compostos presenten transferència electrònica fotoinduïda entre la unitat electró-acceptora de PI i la unitat electró-donadora de trans-estilbè; (b) la diferent morfologia de la cadena alquílica lateral del grup de PI a 1 i 2 afecta la seva capacitat d’auto-assemblatge mitjançant interaccions intermoleculars de tipus π-π. A continuació, s’han assajat diferents metodologies per a la fabricació de micro- i nanoestructures auto-assemblades de 1 i 2. Els millors resultats s’han obtingut mitjançant l’ús de motlles d’òxid d’alúmina i per al compost 2 degut al menor impediment estèric de la seva cadena alquílica lateral. La caracterització de les estructures resultants en aquest cas mitjançant tècniques microscòpiques i espectroscòpiques han permès demostrar la formació de nanotubs de 200 nm de diàmetre, d’uns 15 μm de longitud i en què les unitats de PI s’ordenen amb els seus sistemes aromàtics de forma co-facial o gairebé co-facial. La possible activitat fotovoltaica d’aquestes estructures s’estudiarà posteriorment.

Análisis del micro-voluntariado (crowdsourcing) en una gran empresa para abordar un problema de salud específico

Este trabajo presenta un análisis del efecto positivo que puede tener el microvoluntariado (crowdsourcing) en las variables psicológicas entre trabajadores de una gran empresa, así como la viabilidad de crear una comunidad práctica para abordar un problema de salud específico. Para el desarrollo de este documento hemos recogido y analizado diferentes tipos de bibliografía, científica y no científica, con el fin de dar una explicación más global de lo que es el crowdsourcing y contextualizar este tipo de voluntariado para lograr una mayor comprensión de esta práctica.

Do Fiscal and Political Decentralization Raise Students’ Performance? A Cross-Country Analysis

The low quality of education is a persistent problem in many developed countries. Parallel to in the last decades exists a tendency towards decentralization in many developed and developing countries. Using micro data from the Programme for International Student Assessment (PISA) referred to 22 countries, we test whether there exists an impact of fiscal and political decentralization on student performance in the areas of mathematics, reading skills and science. We observe that fiscal decentralization exerts an unequivocal positive effect on students’ outcomes in all areas, while the effect of political decentralization is more ambiguous. On the one hand, the capacity of the subnational governments to rule on its region has a positive effect on students’ performance in mathematics. On the other hand, the capacity to influence the country as a whole has a negative impact on mathematics achievement. As a general result, we observe that students’ performance in Mathematics is more sensible to these exogenous variations than in Sciences and reading skills. Keywords: School outcomes, PISA, fiscal decentralization, political decentralization JEL codes: H11, H77, I21

PSyscal: disseny i implementació d'un sistema paral·lel per al calibratge automàtic de models P-Sistema

Es tracta d'un projecte que proposa una aplicació per al calibratge automàtic de models P-sistema. Per a fer-ho primer es farà un estudi sobre els models P-sistema i el procediment seguit pels investigadors per desenvolupar aquest tipus de models. Es desenvoluparà una primera solució sèrie per al problema, i s'analitzaran els seus punts febles. Seguidament es proposarà una versió paral·lela que millori significativament el temps d'execució, tot mantenint una alta eficiència i escalabilitat.