36 resultados para Metals and alloys
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
In a recent paper A. S. Johal and D. J. Dunstan [Phys. Rev. B 73, 024106 (2006)] have applied multivariate linear regression analysis to the published data of the change in ultrasonic velocity with applied stress. The aim is to obtain the best estimates for the third-order elastic constants in cubic materials. From such an analysis they conclude that uniaxial stress data on metals turns out to be nearly useless by itself. The purpose of this comment is to point out that by a proper analysis of uniaxial stress data it is possible to obtain reliable values of third-order elastic constants in cubic metals and alloys. Cu-based shape memory alloys are used as an illustrative example.
Resumo:
We analysed concentrations of cadmium, lead, mercury and selenium in blood from males and females of the 2 sibling species of giant petrels, the northern Macronectes halli and the southern M. giganteus, breeding sympatrically at Bird Island (South Georgia, Antarctica). Blood samples were collected in 1998 during the incubation period, from 5 November to 10 December. Between species, cadmium and lead concentrations were significantly higher for northern than for southern giant petrels, which probably resulted from northern giant petrels wintering in more polluted areas (mainly on the Patagonian Shelf and Falkland Islands) compared to southern giant petrels (wintering mainly around South Georgia and the South Sandwich Islands). Between sexes, cadmium concentrations were significantly higher for females than for males in both species, corresponding to the more pelagic habits of females compared to the more scavenging habits of males. Lead and cadmium concentrations in circulating blood decreased significantly over the incubation period, suggesting that when breeding at Bird Island, exposure to the source of pollution had ended, and these metals had been cleared from the blood and excreted, or rapidly transferred to other tissues. Association of lead and cadmium with a common source of pollution was further corroborated by a significant positive correlation between the levels of the 2 elements found. Mercury levels were similar between the species, but showed an opposite trend between sexes, with males showing higher levels than females in northern giant petrels, and the opposite was true in southern giant petrels, with no changes throughout incubation. Selenium levels were similar between sexes, but significantly greater for northern than for southern giant petrels. Moreover, there was a significant increase in the selenium levels over the incubation period in northern giant petrels. Age of adult birds did not affect metal concentrations. Coefficients of variation of metal levels were consistently lower for northern than for southern giant petrels, particularly for mercury, suggesting that the former species is more dietary specialised than the latter. Contaminant analyses, when combined with accurate information on seabird movements, obtained through geolocation or satellite tracking, help us to understand geographic variation of pollution in the marine environment.
Resumo:
The dependence of the dynamic properties of liquid metals and Lennard-Jones fluids on the characteristics of the interaction potentials is analyzed. Molecular-dynamics simulations of liquids in analogous conditions but assuming that their particles interact either through a Lennard-Jones or a liquid-metal potential were carried out. The Lennard-Jones potentials were chosen so that both the effective size of the particles and the depth of the potential well were very close to those of the liquid-metal potentials. In order to investigate the extent to which the dynamic properties of liquids depend on the short-range attractive interactions as well as on the softness of the potential cores, molecular-dynamics simulations of the same systems but assuming purely repulsive interactions with the same potential cores were also performed. The study includes both singleparticle dynamic properties, such as the velocity autocorrelation functions, and collective dynamic properties, such as the intermediate scattering funcfunctions, and collective dynamic properties, such as the intermediate scattering functions, the dynamic structure factors, the longitudinal and transverse current correlations, and the transport coefficients.
Resumo:
La distribución de alimentos líquidos al ganado porcino es un sistema alternativo en el cual el alimento se prepara y distribuye a través de un equipo totalmente informatizado y automatizado. Además de materias primas y piensos permite también el uso de co-productos líquidos de la industria agroalimentaria o productos fermentados. Su utilización evita el coste de su transformación o eliminación permitiendo rebajar el coste de producción del cerdo porque su precio es altamente competitivo. La aplicación de alimentos líquidos fermentados tiene efectos benéficos sobre el epitelio intestinal, la microflora digestiva y el estado sanitario de los lechones, reduciendo la morbilidad y aumentando los resultados de crecimiento. Este sistema de alimentación facilita igualmente la aplicación de programas multifase ajustando diariamente el aporte a las necesidades en nutrientes del cerdo reduciendo la excreción (N, P, metales pesados) y con ello, el riesgo de contaminación medioambiental. The distribution of liquid diets for swine is an alternative system where feed is prepared and distributed by an automatic computerized device. In addition to feedstuffs and complementary dry feed, this system allows the use of fresh or fermented agri-food liquid by-products. These products are cheaper and its use as feed avoids the cost of its transformation or elimination, reducing the environmental load and the cost per kg of pig meat. The fermented liquid feed protects the intestinal epithelium, helps to control digestive microflora and animal health improving piglet growth performance after weaning. This feeding device also helps implementation of multiphase feeding programs, adjusting nutrient supplies to requirements daily, and consequently reducing the nutrient excretion (N, P, heavy metals) and the risk of environmental pollution.
Resumo:
S’ha estudiat la utilització del suro com a adsorbent de metalls i radionúclids, com el plom i el poloni. Aquesta metodologia es pot aplicar en diferents camps, principalment per la separació d’aquests elements tant per a la seva posterior anàlisi com per l’eliminació i descontaminació en medis naturals. El suro és un bon adsorbent del plom, ja que de promig n’adsorbeix un 80%, i existeix dependència amb la relació superfície – volum del suro. La capacitat de càrrega màxima, a partir de les vuit hores, correspon al suro de diàmetre de partícula de 0.5 a 1 mm, amb un valor proper a 6·10-2 mmol Pb/g suro. El poloni presenta una eficiència d’adsorció menor a la del plom, d’un 50% del poloni present en la solució de càrrega inicial. Del present treball es pot concloure que el suro és un bon material adsorbent per a metalls i/o radionúclids, i per tan pot ser emprat com a una tècnica de separació i/o recuperació alternativa a les actualment establertes, sent més econòmica i biodegradable.
Resumo:
Els sediments del fons marí són molt importants en els ecosistemes aquàtics. Aquests sediments són considerats absorbents naturals, ja que s’hi acumulen moltes substàncies nocives, com ara metalls pesants i contaminants orgànics persistents (COPs). En aquest estudi s’han analitzat mostres de sediments del mar Mediterrani amb la finalitat d’examinar els COPs i la possible procedència d’hidrocarburs derivats del petroli. Les mostres han estat extretes davant de la desembocadura del riu Besòs (se n’ha fet una extracció a 8 km i una altra a 54 km de distància respecte la costa) i davant del municipi català anomenat Vilanova i la Geltrú (se n’ha fet, també, una extracció a 8-10 km i una altra a 30-40 km de distància respecte la costa). D’aquestes mostres, obtingudes per perforació, se n’han analitzat el primer i segon centímetres. S’han quantificat els hidrocarburs aromàtics policíclics (PAHs), els bifenils policlorats (PCBs) i els compostos organoclorats (OCPs) utilitzats antigament com a pesticides. S’ha posat de manifest que en les zones més properes a la costa, les concertacions COPs són més elevades a la regió més meridional, tot i estar davant de la desembocadura del riu Besòs. Segurament això és degut a la influència de la deriva litoral (corrent costaner marí en direcció NE-SW). Finalment, l’índex Phytane/Pristane, l’índex de preferència de carboni o, en anglès Carbon Preference Index (CPI) i la barreja complexa sense resoldre o, en anglès, Unresolved Complex Mixture (UCM) apunten a la conclusió que l’origen dels hidrocarburs analitzats (n-alcans) podria ser petrogènic.
Resumo:
Several eco-toxicological studies have shown that insectivorous mammals, due to theirfeeding habits, easily accumulate high amounts of pollutants in relation to other mammal species. To assess the bio-accumulation levels of toxic metals and their in°uenceon essential metals, we quantified the concentration of 19 elements (Ca, K, Fe, B, P,S, Na, Al, Zn, Ba, Rb, Sr, Cu, Mn, Hg, Cd, Mo, Cr and Pb) in bones of 105 greaterwhite-toothed shrews (Crocidura russula) from a polluted (Ebro Delta) and a control(Medas Islands) area. Since chemical contents of a bio-indicator are mainly compositional data, conventional statistical analyses currently used in eco-toxicology can givemisleading results. Therefore, to improve the interpretation of the data obtained, weused statistical techniques for compositional data analysis to define groups of metalsand to evaluate the relationships between them, from an inter-population viewpoint.Hypothesis testing on the adequate balance-coordinates allow us to confirm intuitionbased hypothesis and some previous results. The main statistical goal was to test equalmeans of balance-coordinates for the two defined populations. After checking normality,one-way ANOVA or Mann-Whitney tests were carried out for the inter-group balances
Resumo:
A five year program of systematic multi-element geochemical exploration of the Catalonian Coastal Ranges has been initiated by the Geological Survey of Autonomic Government of Catalonia (Generalitat de Catalunya) and the Department of Geological and Geophysical Exploration (University of Barcelona). This paper reports the first stage results of this regional survey, covering an area of 530 km2 in the Montseny Mountains, NE of Barcelona (Spain). Stream sediments for metals and stream waters for fluoride were chosen because of the regional characteristics. Four target areas for future tactic survey were recognized after the prospect. The most important is a 40 km* zone in the Canoves-Vilamajor area, with high base metal values accompanied by Cd, Ni, Co, As and Sb anomalies. Keywords: Catalanides. Geochemical exploration. Stream sediments. Base metal anomalies. Principal Component Analysis.
Resumo:
Geometric parameters of binary (1:1) PdZn and PtZn alloys with CuAu-L10 structure were calculated with a density functional method. Based on the total energies, the alloys are predicted to feature equal formation energies. Calculated surface energies of PdZn and PtZn alloys show that (111) and (100) surfaces exposing stoichiometric layers are more stable than (001) and (110) surfaces comprising alternating Pd (Pt) and Zn layers. The surface energy values of alloys lie between the surface energies of the individual components, but they differ from their composition weighted averages. Compared with the pure metals, the valence d-band widths and the Pd or Pt partial densities of states at the Fermi level are dramatically reduced in PdZn and PtZn alloys. The local valence d-band density of states of Pd and Pt in the alloys resemble that of metallic Cu, suggesting that a similar catalytic performance of these systems can be related to this similarity in the local electronic structures.
Resumo:
We present results from both, calorimetric and dilatometric studies of the isothermal ordering process taking place in a Cu-Zn-Al shape memory alloy after quenches from Tq temperatures ranging from 350 K to 1200 K. The dissipated energy and the length variations of the system are obtained during the process. The change of these quantities in the whole process have been compared with the difference [MATH] between Ms, measured after the relaxation and Ms measured just after the quench. We obtain that these three quantities present, as a function of Tq, the same qualitative behaviour. These changes are then associated with changes of the L21 ordering after the quench in the system. The relaxational process does not follow a single exponential decay. Instead, a continuous slowing down is observed. A relaxation time [MATH] has been defined to characterize the relaxation rate. We show that [MATH] depends on both the annealing and the quenching (Tq [MATH] 800 K) temperatures through an Arrhenius law.
Resumo:
We have investigated the different contributions to the entropy change at the martensitic transition of different families of Cu-based shape-memory alloys. The total entropy change has been obtained through calorimetric measurements. By measuring the evolution of the magnetic susceptibility with temperature, the entropy change associated with conduction electrons has been evaluated. The contribution of the anharmonic vibrations of the lattice has also been estimated using various parameters associated with the anharmonic behavior of these alloys, collected from the literature. The results found in the present work have been compared to values published for the martensitic transition of group-IV metals. For Cu-based alloys, both electron and anharmonic contributions have been shown to be much smaller than the overall entropy change. This finding demonstrates that the harmonic vibrations of the lattice are the most relevant contribution to the stability of the bcc phase in Cu-based alloys.
Resumo:
We present a study of the influence of atomic order on the relative stability of the bcc and the 18R martensitic structures in a Cu2.96Al0.92Be0.12 crystal. Calorimetric measurements have shown that disorder increases the stability of the 18R phase, contrary to what happens in Cu-Zn-Al alloys for which it is the bcc phase that is stabilized by disordering the system. This different behavior has been explained in terms of a model recently reported. We have also proved that the entropy change at the martensitic transition is independent of the state of atomic order of the crystal, as predicted theoretically. Our results suggest that differences in the vibrational spectrum of the crystal due to different states of atomic order must be equal in the bcc and in the close-packed phases.
Resumo:
Domain growth in a two-dimensional binary alloy is studied by means of Monte Carlo simulation of an ABV model. The dynamics consists of exchanges of particles with a small concentration of vacancies. The influence of changing the vacancy concentration and finite-size effects has been analyzed. Features of the vacancy diffusion during domain growth are also studied. The anomalous character of the diffusion due to its correlation with local order is responsible for the obtained fast-growth behavior.
Resumo:
The magnetocaloric effect that originates from the martensitic transition in the ferromagnetic Ni-Mn-Gashape-memory alloy is studied. We show that this effect is controlled by the magnetostructural coupling at boththe martensitic variant and magnetic domain length scales. A large entropy change induced by moderatemagnetic fields is obtained for alloys in which the magnetic moment of the two structural phases is not verydifferent. We also show that this entropy change is not associated with the entropy difference between themartensitic and the parent phase arising from the change in the crystallographic structure which has beenfound to be independent of the magnetic field within this range of fields.