@neurIST infrastructure for advanced disease management through integration of heterogeneous data, computing, and complex processing services

The increasing volume of data describing humandisease processes and the growing complexity of understanding, managing, and sharing such data presents a huge challenge for clinicians and medical researchers. This paper presents the@neurIST system, which provides an infrastructure for biomedical research while aiding clinical care, by bringing together heterogeneous data and complex processing and computing services. Although @neurIST targets the investigation and treatment of cerebral aneurysms, the system’s architecture is generic enough that it could be adapted to the treatment of other diseases.Innovations in @neurIST include confining the patient data pertaining to aneurysms inside a single environment that offers cliniciansthe tools to analyze and interpret patient data and make use of knowledge-based guidance in planning their treatment. Medicalresearchers gain access to a critical mass of aneurysm related data due to the system’s ability to federate distributed informationsources. A semantically mediated grid infrastructure ensures that both clinicians and researchers are able to seamlessly access andwork on data that is distributed across multiple sites in a secure way in addition to providing computing resources on demand forperforming computationally intensive simulations for treatment planning and research.

What is the value of joint processing of pilots and data in block-fading channels?

The spectral efficiency achievable with joint processing of pilot and data symbol observations is compared with that achievable through the conventional (separate) approach of first estimating the channel on the basis of the pilot symbols alone, and subsequently detecting the datasymbols. Studied on the basis of a mutual information lower bound, joint processing is found to provide a non-negligible advantage relative to separate processing, particularly for fast fading. It is shown that, regardless of the fading rate, only a very small number of pilot symbols (at most one per transmit antenna and per channel coherence interval) shouldbe transmitted if joint processing is allowed.

Bulk silica-based luminescent materials by sol-gel processing of non-conventional precursors

The sol-gel synthesis of bulk silica-based luminescent materials using innocuous hexaethoxydisilane and hexamethoxydisilane monomers, followed by one hour thermal annealing in an inert atmosphere at 950oC-1150oC, is reported. As-synthesized hexamethoxydisilane-derived samples exhibit an intense blue photoluminescence band, whereas thermally treated ones emit stronger photoluminescence radiation peaking below 600 nm. For hexaethoxydisilane-based material, annealed at or above 1000oC, a less intense photoluminescence band, peaking between 780 nm and 850 nm that is attributed to nanocrystalline silicon is observed. Mixtures of both precursors lead to composed spectra, thus envisaging the possibility of obtaining pre-designed spectral behaviors by varying the mixture composition.

Gridifying IBM's Generic Log Adapter to Speed-Up the Processing of Log Data

Peer-reviewed

Material flow accounting of Spain

Material throughput is a means of measuring the so-called social metabolism, or physical dimensions of a society’s consumption, and can be taken as an indirect and approximate indicator of sustainability. Material flow accounting can be used to test the dematerialisation hypothesis, the idea that technological progress causes a decrease in total material used (strong dematerialisation) or material used per monetary unit of output (weak dematerialisation). This paper sets out the results of a material flow analysis for Spain for the period from 1980 to 2000. The analysis reveals that neither strong nor weak dematerialisation took place during the period analysed. Although the population did not increase considerably, materials mobilised by the Spanish economy (DMI) increased by 85% in absolute terms, surpassing GDP growth. In addition, Spain became more dependent on external trade in physical terms. In fact, its imports are more than twice the amount of its exports in terms of weight.

ParallelKnoppix - Rapid deployment of a linux cluster for MPI parallel processing using non-dedicated computers

This note describes ParallelKnoppix, a bootable CD that allows creation of a Linux cluster in very little time. An experienced user can create a cluster ready to execute MPI programs in less than 10 minutes. The computers used may be heterogeneous machines, of the IA-32 architecture. When the cluster is shut down, all machines except one are in their original state, and the last can be returned to its original state by deleting a directory. The system thus provides a means of using non-dedicated computers to create a cluster. An example session is documented.

Material flow accounting of Mexico (1970-2003)

This technical background paper describes the methods applied and data sources used in the compilation of the 1980-2003 data set for material flow accounts of the Mexican economy and presents the data set. It is organised in four parts: the first part gives an overview of the Material Flow Accounting (MFA) methodology. The second part presents the main material flows of the Mexican economy including biomass, fossil fuels, metal ores, industrial minerals and, construction minerals. The aim of this part is to explain the procedures and methods followed, the data sources used as well as providing a brief evaluation of the quality and reliability of the information used and the accounts established. Finally, some conclusions will be provided.

Material Flow Accounting in Chile, Ecuador, Mexico and Peru (1980-2000)

In this paper we compare the resource flows of Chile, Ecuador, Mexico and Peru between 1980 and 2000. In this time span, the domestic extraction of materials increased in the four countries, mainly due to the mining sector in Chile and Peru, biomass and oil in Ecuador and construction minerals in Mexico. Imports and exports increased too, due to the increasing integration in the international markets, prompted by the liberalization policies undertaken by the four countries between the late 1970s and the late 1990s. The four countries had a negative physical trade balance for most of the period analyzed, meaning that their exports exceeded their imports in terms of weight. However, the increase of imports reduced the physical deficit in Chile, Mexico and Peru. Ecuador’s physical deficit was the highest and did not decrease in the period analyzed. Also, a diversification of exports away from bulk commodities could be observed in Chile and Mexico, and to a lesser extent in Peru, whereas in Ecuador the export sector remained mainly based on oil and biomass. More research is needed to explore the environmental effects of this phenomenon. Also, the indirect flows associated to the direct physical flows deserve to be subject to further analysis.

Evaluación agronómica e industrial del material vegetal de avellano en Cataluña. Estudio de nuevas aplicaciones tecnológicas de la avellana

Los frutos secos representan un peso notable en la producción final agrícola española, siendo nuestro país el segundo productor mundial de almendra (55.000 tm grano) y el cuarto de avellana (9.000 tm grano). En el caso del avellano, la superficie de España es de unas 25.000 ha (MAPA, 2000), concentrándose el 95 % de la misma en Cataluña y, más concretamente en Tarragona (18.000 ha), donde el avellano es, en diversas comarcas, una importante fuente de ingresos. Durante las últimas décadas, el sector ha estado sometido a fuertes crisis debido al descenso de precios causado, entre otros motivos, por la existencia o no de acuerdos comerciales entre la UE y Turquía sobre este fruto seco, por las oscilaciones del dólar y la competencia creciente de Turquía, que produce casi el 75 % del total mundial y cuyos costes de producción son más reducidos, por disponer de mano de obra más barata y mejores condiciones edafoclimáticas para el cultivo. Un problema adicional de la avellana española en dicho periodo, fue la poca calidad del producto obtenido, motivada por la realización inadecuada de una serie de prácticas de recogida y de postcosecha. La variedad 'Negret' es la base de la producción de avellana española para industria y, junto con la ‘Pauetet’, constituyen el tipo comercial ‘negreta’ que es el que obtiene mejor precio en el mercado nacional. Ello es debido a sus buenas características organolépticas y elevada aptitud al tostado, que constituye el punto de partida de la mayoría de aplicaciones comerciales. Por otra parte, constituye, también, la base de la producción de la Denominación de Origen ‘Avellana de Reus’. Tradicionalmente esta variedad adolece de importantes problemas de tipo agronómico (poco vigor, rebrotante, sensible a clorosis férrica, asfixia del suelo, muy virosada, etc.) y comercial (facilidad de enranciamiento, calibres pequeños, etc.), situación que ha inducido, en la última década, a la introducción de variedades foráneas (‘Tonda Giffoni’ y ‘Tonda Romana’) que en principio no presentan estos problemas. Sin embargo, la sustitución de la variedad autóctona ‘Negret’ por otras nuevas supondría la pérdida de un carácter diferencial para la producción española, que debe evaluarse con sumo cuidado.

Mejora de la competitividad de las plantaciones frutales de nogal: selección de material vegetal, desarrollo de un modelo de predicción de la infección de Xanthomonas arboricola pv. juglandis y optimización de las podas de formación y producción

En las colecciones del IRTA-Mas Bové se han caracterizado más de 150 clones de nogal procedentes de prospección, material extranjero y de selecciones de distintos programas de mejora. El material se ha caracterizado agronómicamente siguiendo los descriptores del IPGRI (1994). Actualmente existen fichas descriptivas muy amplias de 43 accesiones. Toda esta información sobre el comportamiento del material vegetal en las condiciones climáticas de Tarragona, tiene interés a nivel científico y es muy válida para posibles plantaciones con nuevo material. El estudio de los caracteres de sensibilidad a Bacteriosis y afección de la caída prematura de flores (PFA), en dos decendencias de nogal de cruzamientos controlados, ha permitido obvervar que estos caracteres tienen una herencia compleja. Se ha establecido la virulencia de distintos aislados de Xanthomonas arboricola pv. juglandis, en nogal. Los aislados más virulentos se han utilizado para establecer un modelo de predicción, en condiciones de laboratorio, de esta bacteria en nogal. La temperatura a la que la severidad de la enfermedad es máxima es 26ºC. A esta temperatura un aumento en la duración del período de humedad relativa elevada de 0-24 horas, produce un aumento de la afección. En los próximos años, este modelo de predicción se validará en campo. Si los resultados son positivos, permitirán racionalizar los tratamientos para la Bacteriosis en las plantaciones de nogal. Los primeros resultados de un control de la iluminación en el interior de las copas de los árboles, realizado mediante medidas de iluminación interceptadas con un ceptómetro Delta T (SunScan), han puesto de manifiesto que la gran influencia de la luz en el crecimiento anual de las ramas. Así, en la formación y poda de los árbles hay que tener presente estos resultados, en especial en las formaciones en ejes libres, y favorecer la máxima entrada de luz en el interior de la copa de los árboles.

Effect of high pressure processing on the microbiology of skin-vacuum packaged sliced meat products: cooked pork ham, dry cured pork ham and marinated beef loin

High hydrostatic pressure is being increasingly investigated in food processing. It causes microbial inactivation and therefore extends the shelf life and enhances the safety of food products. Yeasts, molds, and vegetative cells of bacteria can be inactivated by pressures in the range of 200 to 700 MPa. Microorganisms are more or less sensitive to pressure depending on several factors such as type, strain and the phase or state of the cells. In general, Gram-positive organisms are usually more resistant than Gram-negative. High pressure processing modifies the permeability of the cell membrane, the ion exchange and causes changes in morphology and biochemical reactions, protein denaturations and inhibition of genetic mechanisms. High pressure has been used successfully to extend the shelf life of high-acid foods such as refrigerated fruit juices, jellies and jams. There is now an increasing interest in the use of this technology to extend the shelf life of low-acid foods such as different types of meat products.