Counter-propagating dual-trap optical tweezers based on linear momentum conservation

We present a dual-trap optical tweezers setup which directly measures forces using linear momentum conservation. The setup uses a counter-propagating geometry, which allows momentum measurement on each beam separately. The experimental advantages of this setup include low drift due to all-optical manipulation, and a robust calibration (independent of the features of the trapped object or buffer medium) due to the force measurement method. Although this design does not attain the high-resolution of some co-propagating setups, we show that it can be used to perform different single molecule measurements: fluctuation-based molecular stiffness characterization at different forces and hopping experiments on molecular hairpins. Remarkably, in our setup it is possible to manipulate very short tethers (such as molecular hairpins with short handles) down to the limit where beads are almost in contact. The setup is used to illustrate a novel method for measuring the stiffness of optical traps and tethers on the basis of equilibrium force fluctuations, i.e., without the need of measuring the force vs molecular extension curve. This method is of general interest for dual trap optical tweezers setups and can be extended to setups which do not directly measure forces.

A new approach to real time traffic sign recognition based on colour information

The automatic interpretation of conventional traffic signs is very complex and time consuming. The paper concerns an automatic warning system for driving assistance. It does not interpret the standard traffic signs on the roadside; the proposal is to incorporate into the existing signs another type of traffic sign whose information will be more easily interpreted by a processor. The type of information to be added is profuse and therefore the most important object is the robustness of the system. The basic proposal of this new philosophy is that the co-pilot system for automatic warning and driving assistance can interpret with greater ease the information contained in the new sign, whilst the human driver only has to interpret the "classic" sign. One of the codings that has been tested with good results and which seems to us easy to implement is that which has a rectangular shape and 4 vertical bars of different colours. The size of these signs is equivalent to the size of the conventional signs (approximately 0.4 m2). The colour information from the sign can be easily interpreted by the proposed processor and the interpretation is much easier and quicker than the information shown by the pictographs of the classic signs

Availability analysis of GMPLS connections based on physical network topology

This paper presents a study of connection availability in GMPLS over optical transport networks (OTN) taking into account different network topologies. Two basic path protection schemes are considered and compared with the no protection case. The selected topologies are heterogeneous in geographic coverage, network diameter, link lengths, and average node degree. Connection availability is also computed considering the reliability data of physical components and a well-known network availability model. Results show several correspondences between suitable path protection algorithms and several network topology characteristics

Nanomotors: new strategies of (bio)sensing based on motion

Nanomotors are nanoscale devices capable of converting energy into movement and forces. Among them, self-propelled nanomotors offer considerable promise for developing new and novel bioanalytical and biosensing strategies based on the direct isolation of target biomolecules or changes in their movement in the presence of target analytes. The mainachievements of this project consists on the development of receptor-functionalized nanomotors that offer direct and rapid target detection, isolation and transport from raw biological samples without preparatory and washing steps. For example, microtube engines functionalized with aptamer, antibody, lectin and enzymes receptors were used for the direct isolation of analytes of biomedical interest, including proteins and whole cells, among others. A target protein was also isolated from a complex sample by using an antigen-functionalized microengine navigating into the reservoirs of a lab-on-a-chip device. The new nanomotorbased target biomarkers detection strategy not only offers highly sensitive, rapid, simple and low cost alternative for the isolation and transport of target molecules, but also represents a new dimension of analytical information based on motion. The recognition events can be easily visualized by optical microscope (without any sophisticated analytical instrument) to reveal the target presence and concentration. The use of artificial nanomachines has shown not only to be useful for (bio)recognition and (bio)transport but also for detection of environmental contamination and remediation. In this context, micromotors modified with superhydrophobic layer demonstrated that effectively interacted, captured, transported and removed oil droplets from oil contaminated samples. Finally, a unique micromotor-based strategy for water-quality testing, that mimics live-fish water-quality testing, based on changes in the propulsion behavior of artificial biocatalytic microswimmers in the presence of aquatic pollutants was also developed. The attractive features of the new micromachine-based target isolation and signal transduction protocols developed in this project offer numerous potential applications in biomedical diagnostics, environmental monitoring, and forensic analysis.

Oscillatory magnetic tweezers based on ferromagnetic beads and simple coaxial coils

We report the design and validation of simple magnetic tweezers for oscillating ferromagnetic beads in the piconewton and nanometer scales. The system is based on a single pair of coaxial coils operating in two sequential modes: permanent magnetization of the beads through a large and brief pulse of magnetic field and generation of magnetic gradients to produce uniaxial oscillatory forces. By using this two step method, the magnetic moment of the beads remains constant during measurements. Therefore, the applied force can be computed and varies linearly with the driving signal. No feedback control is required to produce well defined force oscillations over a wide bandwidth. The design of the coils was optimized to obtain high magnetic fields (280 mT) and gradients (2 T/m) with high homogeneity (5% variation) within the sample. The magnetic tweezers were implemented in an inverted optical microscope with a videomicroscopy-based multiparticle tracking system. The apparatus was validated with 4.5 ¿m magnetite beads obtaining forces up to ~2 pN and subnanometer resolution. The applicability of the device includes microrheology of biopolymer and cell cytoplasm, molecular mechanics, and mechanotransduction in living cells.

On-axis joint transform correlation based on a four-level power spectrum

We propose a method to obtain a single centered correlation with use of a joint transform correlator. We analyze the required setup to carry out the whole process optically, and we also present experimental results.

Selective ablation of photovoltaic materials with UV laser sources for monolithic interconnection of devices based on a-Si:H

Lasers are essential tools for cell isolation and monolithic interconnection in thin-film-silicon photovoltaic technologies. Laser ablation of transparent conductive oxides (TCOs), amorphous silicon structures and back contact removal are standard processes in industry for monolithic device interconnection. However, material ablation with minimum debris and small heat affected zone is one of the main difficulty is to achieve, to reduce costs and to improve device efficiency. In this paper we present recent results in laser ablation of photovoltaic materials using excimer and UV wavelengths of diode-pumped solid-state (DPSS) laser sources. We discuss results concerning UV ablation of different TCO and thin-film silicon (a-Si:H and nc-Si:H), focussing our study on ablation threshold measurements and process-quality assessment using advanced optical microscopy techniques. In that way we show the advantages of using UV wavelengths for minimizing the characteristic material thermal affection of laser irradiation in the ns regime at higher wavelengths. Additionally we include preliminary results of selective ablation of film on film structures irradiating from the film side (direct writing configuration) including the problem of selective ablation of ZnO films on a-Si:H layers. In that way we demonstrate the potential use of UV wavelengths of fully commercial laser sources as an alternative to standard backscribing process in device fabrication.

A monolithic glass chip for active single-cell sorting based on mechanical phenotyping

The mechanical properties of biological cells have long been considered as inherent markers of biological function and disease. However, the screening and active sorting of heterogeneous populations based on serial single-cell mechanical measurements has not been demonstrated. Here we present a novel monolithic glass chip for combined fluorescence detection and mechanical phenotyping using an optical stretcher. A new design and manufacturing process, involving the bonding of two asymmetrically etched glass plates, combines exact optical fiber alignment, low laser damage threshold and high imaging quality with the possibility of several microfluidic inlet and outlet channels. We show the utility of such a custombuilt optical stretcher glass chip by measuring and sorting single cells in a heterogeneous population based on their different mechanical properties and verify sorting accuracy by simultaneous fluorescence detection. This offers new possibilities of exact characterization and sorting of small populations based on rheological properties for biological and biomedical applications.

The Barcelonnettes: an example of network-entrepreneurs in XIX century Mexico. An explanation based on a theory of bounded rational choice with social embeddedness

A theory of network-entrepreneurs or "spin-off system" is presented in this paper for the creation of firms based on the community’s social governance. It is argued that firm’s capacity for accumulation depends on the presence of employees belonging to the same social/ethnic group with expectations of "inheriting" the firm and becoming entrepreneurs once they have been selected for their merits and loyalty towards their patrons. Such accumulation is possible because of the credibility of the patrons’ promises of supporting newcomers due to high social cohesion and specific social norms prevailing in the community. This theory is exemplified through the case of the Barcelonnettes, a group of immigrants from the Alps in the South of France (Provence) who came to Mexico in the XIX Century.

What is the european social model? an aproximation based on Spanish case

The public perception of the EU in Spain varies greatly. The most positive aspects of Spanish membership are associated with the consolidation of democracy, economic growth, the introduction of the euro, the growth in employment and structural and cohesion funds, the increase in the female participation rate, and the equal opportunities policies. The analysts are in favour of common objectives in the employment policy and multi-level government. The less positive aspects of the EU are the risks of losing social protection and loss of employment in some sectors due to mergers of multinationals and delocalization of companies towards Eastern Europe. The continuous demands for reform of the welfare state, the toughening of the conditions of access to social benefit and the reform of the labour market are also seen as problematic issues. Risks of competitive cuts and social dumping.

A foundation model for marxian breakdown theories based on a new falling rate of profit mechanism (Long version)

The paper presents a foundation model for Marxian theories of the breakdown of capitalism based on a new falling rate of profit mechanism. All of these theories are based on one or more of "the historical tendencies": a rising capital-wage bill ratio, a rising capitalist share and a falling rate of profit. The model is a foundation in the sense that it generates these tendencies in the context of a model with a constant subsistence wage. The newly discovered generating mechanism is based on neo-classical reasoning for a model with land. It is non-Ricardian in that land augmenting technical progress can be unboundedly rapid. Finally, since the model has no steady state, it is necessary to use a new technique, Chaplygin's method, to prove the result.

A foundation model for marxian breakdown theories based on a new falling rate of profit mechanism.

The paper presents a foundation model for Marxian theories of the breakdown of capitalism based on a new falling rate of profit mechanism. All of these theories are based on one or more of ?the historical tendencies?: a rising capital-wage bill ratio, a rising capitalist share and a falling rate of profit. The model is a foundation in the sense that it generates these tendencies in the context of a model with a constant subsistence wage. The newly discovered generating mechanism is based on neo-classical reasoning for a model with land. It is non-Ricardian in that land augmenting technical progress can be unboundedly rapid. Finally, since the model has no steady state, it is necessary to use a new technique, Chaplygin?s method, to prove the result.

A public-key cryptosystem based on second order linear sequences

Based on Lucas functions, an improved version of the Diffie-Hellman distribution key scheme and to the ElGamal public key cryptosystem scheme are proposed, together with an implementation and computational cost. The security relies on the difficulty of factoring an RSA integer and on the difficulty of computing the discrete logarithm.

Cooperative strategies for imperfect CSI scenarios based on distributed Alamouti

Les comunicacions cooperatives estan guanyant un gran interès en les comunicacions modernes degut a que permeten millorar la transmissió dʼinformació entre un emissor i un receptor utilitzant una sèrie de terminals situats entre ells. Aquest projecte és un estudi complet del sistemes cooperatius, analitzant el seu rendiment i comparant lʼús dʼun sol dʼaquests terminals amb lʼús del codi Alamouti, que utilitza dos terminals. Primer hi ha una introducció als sistemes cooperatius i a la teoria de la informació. Després hem estudiat un sistema cooperatiu amb la teoria de la informació com a base, en termes de probabilitat de fallada del sistema, i posteriorment lʼhem adaptat a un sistema cooperatiu real utilitzant una modulació QPSK, estudiant la seva probabilitat dʼerror de paquet. Finalment es proposen diversos protocols que permeten millorar el rendiment del sistema cooperatiu estudiat.

Creation of a carrier-grade telco based on a voice over IP backbone

En aquesta memòria l'autor, fent servir un enfoc modern, redissenya i implementa la plataforma que una empresa de telecomunicacions del segle 21 necessita per poder donar serveis de telefonia i comunicacions als seus usuaris i clients. Al llarg d'aquesta exposició es condueix al lector des d'una fase inicial de disseny fins a la implementació i posada en producció del sistema final desenvolupat, centrant-nos en solucionar les necessitats actuals que això implica. Aquesta memòria cubreix el software, hardware i els processos de negoci associats al repte de fer realitat aquest objectiu, i presenta al lector les múltiples tecnologies emprades per aconseguir-ho, fent emfàsi en la convergència actual de xarxes cap al concepte de xarxes IP i basant-se en aquesta tendència i utilitzant aquesta tecnologia de veu sobre IP per donar forma a la plataforma que finalment, de forma pràctica, es posa en producció.