Work Organization Practices for Lean Production: A Study in Spanish and Brazilian Manufacturers

This work aims to discuss particular work organization practices in human resources reported as successful by companies adopting lean production principles, and investigate them through real examples observed on manufacturing plants in Spain and Brazil. A set of work organization practices was previously established by one of the authors, through interviews with practitioners of lean production and review of the literature. A series of visits and informal interviews at Spanish and Brazilian automotive parts manufacturers that follow lean production were conducted to verify that the set of policies are indeed practiced.

Estimation of lean meat content in pig carcasses using X-ray Computed Tomography and PLS regression

Lean meat percentage (LMP) is an important carcass quality parameter. The aim of this work is to obtain a calibration equation for the Computed Tomography (CT) scans with the Partial Least Square Regression (PLS) technique in order to predict the LMP of the carcass and the different cuts and to study and compare two different methodologies of the selection of the variables (Variable Importance for Projection — VIP- and Stepwise) to be included in the prediction equation. The error of prediction with cross-validation (RMSEPCV) of the LMP obtained with PLS and selection based on VIP value was 0.82% and for stepwise selection it was 0.83%. The prediction of the LMP scanning only the ham had a RMSEPCV of 0.97% and if the ham and the loin were scanned the RMSEPCV was 0.90%. Results indicate that for CT data both VIP and stepwise selection are good methods. Moreover the scanning of only the ham allowed us to obtain a good prediction of the LMP of the whole carcass.

Comparison of different devices for predicting the lean meat percentage of pig carcasses

Lean meat percentage (LMP) is the criterion for carcass classification and it must be measured on line objectively. The aim of this work was to compare the error of the prediction (RMSEP) of the LMP measured with the following different devices: Fat-O-Meat’er (FOM), UltraFOM (UFOM), AUTOFOM and -VCS2000. For this reason the same 99 carcasses were measured using all 4 apparatus and dissected according to the European Reference Method. Moreover a subsample of the carcasses (n=77) were fully scanned with a X-ray Computed Tomography equipment (CT). The RMSEP calculated with cross validation leave-one-out was lower for FOM and AUTOFOM (1.8% and 1.9%, respectively) and higher for UFOM and VCS2000 (2.3% for both devices). The error obtained with CT was the lowest (0.96%) in accordance with previous results, but CT cannot be used on line. It can be concluded that FOM and AUTOFOM presented better accuracy than UFOM and VCS2000.

Estudi i implantació del sistema Lean Manufacturing a una empresa convencional del sector de l'automòbil, per incrementar la competitivitat

El projecte es planteja la implantació de la metodologia LEAN en una de les plantes de producció d’una empresa del sector de la indústria de l’automòbil per aconseguir millorar la seva competitivitat. El projecte engloba l’anàlisi de les cadenes de valor de quatre dels productes més significatius que es fabriquen actualment a la planta, mitjançant la metodologia Value Stream Map (VSM), així com el desenvolupament de noves propostes per la millora de cadascuna de les cadenes

Empirical approaches to inequality of opportunity: principles, measures, and evidence

We put together the different conceptual issues involved in measuring inequality of opportunity, discuss how these concepts have been translated into computable measures, and point out the problems and choices researchers face when implementing these measures. Our analysis identifies and suggests several new possibilities to measure inequality of opportunity. The approaches are illustrated with a selective survey of the empirical literature on income inequality of opportunity.

Lean Management (LM): Bases, eines i avantatges de la seva utilització al Sector Sanitari. Aplicació del LM a l’hospital St. Rafael de Barcelona per optimitzar el flux de pacients a la consulta externa de Traumatología.

Aquest projecte presenta, per una banda, una revisió del Lean Management i de l'estat actual de la seva aplicació al sector sanitari. Es descriuen els principis i la filosofia en què es basa aquest sistema, les eines i tècniques que li són pròpies, així com les avantatges que aporta cadascuna d’elles a l'empresa en general i, més concretament, al sector sanitari. D'altra banda, també descriu una petita aplicació pràctica de la metodologia Lean per al control de fluxos de pacients al servei d’atenció ambulatòria de l’Hospital Sant Rafael de Barcelona, amb l’objectiu de disminuir el temps total que els pacients tarden en ser atesos pel metge, a través d’eines que alhora aporten valor afegit a tant a pacients com a professionals.

Are the maximum hardness and minimum polarizability principles always obeyed in nontotally symmetric vibrations?

An overview is given on a study which showed that not only in chemical reactions but also in the favorable case of nontotally symmetric vibrations where the chemical and external potentials keep approximately constant, the generalized maximum hardness principle (GMHP) and generalized minimum polarizability principle (GMPP) may not be obeyed. A method that allows an accurate determination of the nontotally symmetric molecular distortions with more marked GMPP or anti-GMPP character through diagonalization of the polarizability Hessian matrix is introduced

Variational principles for nonlinear dynamical systems

A variational method for Hamiltonian systems is analyzed. Two different variationalcharacterization for the frequency of nonlinear oscillations is also suppliedfor non-Hamiltonian systems

An analysis of the accounting principles applied by the European Farm Accountancy Data Network

In spite of its relative importance in the economy of many countriesand its growing interrelationships with other sectors, agriculture has traditionally been excluded from accounting standards. Nevertheless, to support its Common Agricultural Policy, for years the European Commission has been making an effort to obtain standardized information on the financial performance and condition of farms. Through the Farm Accountancy Data Network (FADN), every year data are gathered from a rotating sample of 60.000 professional farms across all member states. FADN data collection is not structured as an accounting cycle but as an extensive questionnaire. This questionnaire refers to assets, liabilities, revenues and expenses, and seems to try to obtain a "true and fair view" of the financial performance and condition of the farms it surveys. However, the definitions used in the questionnaire and the way data is aggregated often appear flawed from an accounting perspective. The objective of this paper is to contrast the accounting principles implicit in the FADN questionnaire with generally accepted accounting principles, particularly those found in the IVth Directive of the European Union, on the one hand, and those recently proposed by the International Accounting Standards Committee’s Steering Committeeon Agriculture in its Draft Statement of Principles, on the other hand. There are two reasons why this is useful. First, it allows to make suggestions how the information provided by FADN could be more in accordance with the accepted accounting framework, and become a more valuable tool for policy makers, farmers, and other stakeholders. Second, it helps assessing the suitability of FADN to become the starting point for a European accounting standard on agriculture.

Plasma leptin turnover rates in lean and obese Zucker rats

Conscious female adult lean and obese Zucker rats were injected through the jugular vein with radioactive iodine-labeled murine leptin; in the ensuing 8 min, four blood samples were sequentially extracted from the carotid artery. The samples were used in a modified RIA for leptin, in which paired tubes received the same amount of either labeled or unlabeled leptin, thus allowing us to estimate both leptin levels and specific radioactivity. The data were used to determine the decay curve parameters from which the half-life of leptin (5.46 ± 0.23 min for lean rats and 6.99 ± 0.75 min for obese rats) as well as the size of its circulating pool (32 pmol/kg for lean rats and 267 pmol/kg for obese rats) and the overall degradation rate (96 fkat/kg for lean rats and 645 fkat/kg for obese rats) were estimated. These values are consistent with the hormonal role of leptin and the need for speedy changes in its levels in response to metabolic challenge.

First-principles periodic calculation of four-body spin terms in high-Tc cuprate superconductors

A general mapping between the energy of pertinent magnetic solutions and the diagonal terms of the spin Hamiltonian in a local representation provides the first general framework to extract accurate values for the many body terms of extended spin Hamiltonians from periodic first-principle calculations. Estimates of these terms for La2CuO4, the paradigm of high-Tc superconductor parent compounds, and for the SrCu2O3 ladder compound are reported. For La2CuO4, present results support experimental evidence by Toader et al. [Phys. Rev. Lett. 94, 197202 (2005)]. For SrCu2O3 even larger four-body spin amplitudes are found together with Jl/Jr=1 and non-negligible ferromagnetic interladder exchange.

First-principles periodic calculation of four-body spin terms in high-Tc Cuprate superconductors

A general mapping between the energy of pertinent magnetic solutions and the diagonal terms of the spin Hamiltonian in a local representation provides the first general framework to extract accurate values for the many body terms of extended spin Hamiltonians from periodic first-principle calculations. Estimates of these terms for La2CuO4, the paradigm of high-Tc superconductor parent compounds, and for the SrCu2O3 ladder compound are reported. For La2CuO4, present results support experimental evidence by Toader et al. [Phys. Rev. Lett. 94, 197202 (2005)]. For SrCu2O3 even larger four-body spin amplitudes are found together with Jl/Jr=1 and non-negligible ferromagnetic interladder exchange.

A first-principles analysis of the magnetism of CuII polynuclear coordination complexes: the case of [Cu4(bpy)4(aspartate)2(H2O)3](ClO4)4·2.5H2O

The magnetic structure of the [Cu4(bpy)4(aspartate)2(H2O)3](ClO4)4·2.5 H2Ocrystal - using fractional coordinates determined at room-temperature ¿ has beenanalysed in detail. This analysis has been carried out by extending our first principlesbottom-up theoretical approach, which was initially designed to study through-spacemagnetic interactions, to handle through-bond magnetic interactions. The only input datarequired by this approach are the values of the computed JAB exchange parameters for allthe unique pairs of spin-containing centres. The results allow the magnetic structure ofthe crystal, which presents two types of isolated tetranuclear CuII clusters, to be definedin quantitative terms. Each of these clusters presents ferro and antiferromagneticinteractions, the former being stronger, although outnumbered by the latter. Thecomputed magnetic susceptibility curve shows the same qualitative features as theexperimental data. However, there are small differences that are presumed to beassociated with the use of room-temperature crystal coordinates.

The prediction of chemical reactivity from first principles: Collision and reaction dynamics

Aquest treball fa una revisió de mesures experimentals i càlculs teòrics sobre la dinàmica de col·lisions i reaccions moleculars. Els experiments se centren en col·lisions, a energies intermèdies, que involucren sistemes del tipus ió-àtom i iómolècula, per les quals es mesuren seccions eficaces totals, estat a estat, així com aquelles que discerneixen les diferents contribucions del moment angular d'espín. Els resultats obtinguts s'interpreten satisfactòriament en termes d'acoblaments no adiabàtics entre els diferents estats electrònics dels sistemes col·lisionants. Els càlculs teòrics utilitzen la metodologia quasiclàssica, així com metodologies mecanoquàntiques recentment desenvolupades, tant aproximades com exactes. S'han obtingut resultats totalment convergits per sistemes tipus, mentre que s'han analitzat, de manera detallada i extensiva, les característiques dinàmiques de sistemes triatòmic, tetraatòmic i pentaatòmic.

First-principles study of the neutral molecular metal Ni(tmdt)2.

The electronic structure of the molecular solid Ni(tmdt)2, the only well characterized neutral molecular metal to date, has been studied by means of first-principles density functional calculations. It is shown that these calculations correctly describe the metallic vs semiconducting behavior of molecular conductors of this type. The origin of the band overlap leading to the metallic character and the associated Fermi surfaces has been studied.