Bringing actors and violent conflict into forced migration literature. A model of the decision to return

Populations displaced as a result of mass violent conflict have become one of the most pressing humanitarian concerns of the last decades. They have also become one salient political issue as a perceived burden (in economic and security terms) and as an important piece in the shift towards a more interventionist paradigm in the international system, based on both humanitarian and security grounds. The saliency of these aspects has detracted attention from the analysis of the interactions between relocation processes and violent conflict. Violent conflict studies have also largely ignored those interactions as a result of the consideration of these processes as mere reaction movements determined by structural conditions. This article takes the view that individual’s agency is retained during such processes, and that it is consequential, calling for the need to introduce a micro perspective. Based on this, a model for the individual’s decision of return is presented. The model has the potential to account for the dynamics of return at both the individual and the aggregate level. And it further helps to grasp fundamental interconnections with violent conflict. Some relevant conclusions are derived for the case of Bosnia-Herzegovina and about the implications of the politicization of return.

The suitability of steam exploded vitis vinifera and alkaline lignin for the manufacture of fiberboard

The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications

Toleration and the fair terms of engagement with diversity

The aim of this paper is to examine the various controversies over the genuineproblems of toleration in a plurally diverse polity as both historically andconceptually, toleration is one of the foundational characteristics that defines thevery essence of a plurally diverse polity and the basic virtue associated with a liberalconception of citizenship. In section 1, I present the main philosophical andconceptual issues related to the toleration-based approach to diversity in liberalpolitical theory. In section 2 I identify the conditions and the circumstances oftoleration. I articulate in Section 3 the most pressing objections against toleration. Ipresent in section 4 two competing approaches to the toleration-based approach todiversity is faced with. In the concluding section, I outline a modified conception oftoleration that mediates between different requirements associated with the twoprincipled commitments of the liberal version of the rights-based conception ofcitizenship.

Capital goods imports and investments in Latin America in the mid 1920s

The assessment of Latin American long term economic performance is in urgent need ofmobilizing more data to match the pressing demands of growth analysts. We present asystematic comparison of capital goods imports for 20 Latin American countries in 1925. It relies on both the foreign trade data of the importing countries and of the major exporting countries the industrialized economies of the time. The quality of foreign trade figures is tested; an homogeneous estimate of capital goods imported is derived, and its per capita ranking is discussed providing new light on Latin American development levels before import substitution.

Ophiolite-related ultramafic rocks (Serpentinites) in the Caribbean region: a review of their occurrence, composition, origin, emplacements and Ni-Laterite soil formation

Ultramafic rocks, mainly serpentinized peridotites of mantle origin, are mostly associated with the ophiolites of Mesozoic age that occur in belts along three of the margins of the Caribbean plate. The most extensive exposures are in Cuba. The ultramafic-mafic association (ophiolites) were formed and emplaced in several different tectonic environments. Mineralogical studies of the ultramafic rocks and the chemistry of the associated mafic rocks indicate that most of the ultramafic-mafic associations in both the northern and southern margins of the plate were formed in arc-related environments. There is little mantle peridotite exposed in the ophiolitic associations of the west coast of Central America, in the south Caribbean in Curacao and in the Andean belts in Colombia. In these occurrences the chemistry and age of the mafic rocks indicates that this association is mainly part of the 89 Ma Caribbean plateau province. The age of the mantle peridotites and associated ophiolites is probably mainly late Jurassic or Early Cretaceous. Emplacement of the ophiolites possibly began in the Early Cretaceous in Hispaniola and Puerto Rico, but most emplacement took place in the Late Cretaceous to Eocene (e.g. Cuba). Along the northern South America plate margin, in the Caribbean mountain belt, emplacement was by major thrusting and probably was not completed until the Oligocene or even the early Miocene. Caribbean mantle peridotites, before serpentinization, were mainly harzburgites, but dunites and lherzolites are also present. In detail, the mineralogical and chemical composition varies even within one ultramafic body, reflecting melting processes and peridotite/melt interaction in the upper mantle. At least for the northern Caribbean, uplift (postemplacement tectonics) exposed the ultramafic massifs as a land surface to effective laterization in the beginning of the Miocene. Tectonic factors, determining the uplift, exposing the peridotites to weathering varied. In the northern Caribbean, in Guatemala, Jamaica, and Hispaniola, uplift occurred as a result of transpresional movement along pre-existing major faults. In Cuba, uplift occurred on a regional scale, determined by isostatic adjustment. In the south Caribbean, uplift of the Cordillera de la Costa and Serrania del Interior exposing the peridotites, also appears to be related to strike-slip movement along the El Pilar fault system. In the Caribbean, Ni-laterite deposits are currently being mined in the central Dominican Republic, eastern Cuba, northern Venezuela and northwest Colombia. Although apparently formed over ultramafic rocks of similar composition and under similar climatic conditions, the composition of the lateritic soils varies. Factors that probably determined these differences in laterite composition are geomorphology, topography, drainage and tectonics. According to the mineralogy of principal ore-bearing phases, Dominican Ni-laterite deposits are classified as the hydrous silicate-type. The main Ni-bearing minerals are hydrated Mg-Ni silicates (serpentine and ¿garnierite¿) occurring deeper in the profile (saprolite horizon). In contrast, in the deposits of eastern Cuba, the Ni and Cooccurs mainly in the limonite zone composed of Fe hydroxides and oxides as the dominant mineralogy in the upper part of the profile, and are classified as the oxide-type.

Detection of millimetric deformation using a terrestrial laser scanner: experiment and application to a rockfall event

Terrestrial laser scanning (TLS) is one of the most promising surveying techniques for rockslope characterization and monitoring. Landslide and rockfall movements can be detected by means of comparison of sequential scans. One of the most pressing challenges of natural hazards is combined temporal and spatial prediction of rockfall. An outdoor experiment was performed to ascertain whether the TLS instrumental error is small enough to enable detection of precursory displacements of millimetric magnitude. This consists of a known displacement of three objects relative to a stable surface. Results show that millimetric changes cannot be detected by the analysis of the unprocessed datasets. Displacement measurement are improved considerably by applying Nearest Neighbour (NN) averaging, which reduces the error (1¿) up to a factor of 6. This technique was applied to displacements prior to the April 2007 rockfall event at Castellfollit de la Roca, Spain. The maximum precursory displacement measured was 45 mm, approximately 2.5 times the standard deviation of the model comparison, hampering the distinction between actual displacement and instrumental error using conventional methodologies. Encouragingly, the precursory displacement was clearly detected by applying the NN averaging method. These results show that millimetric displacements prior to failure can be detected using TLS.

An approach to predicting bowing control parameter contours in violin performance

We present a machine learning approach to modeling bowing control parametercontours in violin performance. Using accurate sensing techniqueswe obtain relevant timbre-related bowing control parameters such as bowtransversal velocity, bow pressing force, and bow-bridge distance of eachperformed note. Each performed note is represented by a curve parametervector and a number of note classes are defined. The principal componentsof the data represented by the set of curve parameter vectors are obtainedfor each class. Once curve parameter vectors are expressed in the new spacedefined by the principal components, we train a model based on inductivelogic programming, able to predict curve parameter vectors used for renderingbowing controls. We evaluate the prediction results and show the potentialof the model by predicting bowing control parameter contours from anannotated input score.

Statistical modeling of bowing control applied to violin sound synthesis

Excitation-continuous music instrument control patterns are often not explicitly represented in current sound synthesis techniques when applied to automatic performance. Both physical model-based and sample-based synthesis paradigmswould benefit from a flexible and accurate instrument control model, enabling the improvement of naturalness and realism. Wepresent a framework for modeling bowing control parameters inviolin performance. Nearly non-intrusive sensing techniques allow for accurate acquisition of relevant timbre-related bowing control parameter signals.We model the temporal contour of bow velocity, bow pressing force, and bow-bridge distance as sequences of short Bézier cubic curve segments. Considering different articulations, dynamics, and performance contexts, a number of note classes are defined. Contours of bowing parameters in a performance database are analyzed at note-level by following a predefined grammar that dictates characteristics of curve segment sequences for each of the classes in consideration. As a result, contour analysis of bowing parameters of each note yields an optimal representation vector that is sufficient for reconstructing original contours with significant fidelity. From the resulting representation vectors, we construct a statistical model based on Gaussian mixtures suitable for both the analysis and synthesis of bowing parameter contours. By using the estimated models, synthetic contours can be generated through a bow planning algorithm able to reproduce possible constraints caused by the finite length of the bow. Rendered contours are successfully used in two preliminary synthesis frameworks: digital waveguide-based bowed stringphysical modeling and sample-based spectral-domain synthesis.

Statistical modeling of violin bowing parameter contours

We present a framework for modeling right-hand gestures in bowed-string instrument playing, applied to violin. Nearly non-intrusive sensing techniques allow for accurate acquisition of relevant timbre-related bowing gesture parameter cues. We model the temporal contour of bow transversal velocity, bow pressing force, and bow-bridge distance as sequences of short segments, in particular B´ezier cubic curve segments. Considering different articulations, dynamics, andcontexts, a number of note classes is defined. Gesture parameter contours of a performance database are analyzed at note-level by following a predefined grammar that dictatescharacteristics of curve segment sequences for each of the classes into consideration. Based on dynamic programming, gesture parameter contour analysis provides an optimal curve parameter vector for each note. The informationpresent in such parameter vector is enough for reconstructing original gesture parameter contours with significant fidelity. From the resulting representation vectors, weconstruct a statistical model based on Gaussian mixtures, suitable for both analysis and synthesis of bowing gesture parameter contours. We show the potential of the modelby synthesizing bowing gesture parameter contours from an annotated input score. Finally, we point out promising applicationsand developments.

From room for books to room for users: an old infantry barrack as an answer to the lack of space

At the beginning of the 21st century, some Catalan university libraries detected a need stemming from the lack of space and the reconversion of physical libraries within the new European educational panorama. With the same cooperative spirit that characterized previous CBUC (Consortium of Academic Libraries of Catalonia) programs and services, the Consortium set in motion a project to address this need. An initial study was commissioned in 2002, and in 2003 a suitable building (old infantry barracks) was found in Lleida. The official opening took place in 2008. GEPA (Guaranteed Space for the Preservation of Access) facility is a cooperative repository, whose objectives are to store and preserve low use documents, ensuring their future access when needed, to convert room for books into room for library users, and doing it saving both space and money. The paper presents a brief historical introduction about the physical management of collections in libraries, and a short overview about high density library repositories all over the world, as an answer to the pressing problem of lack of spaces. The main goals of the communication are to comment the architectural project and its librarian issues, and to show how the GEPA facility allowed to change the spaces in university libraries in Catalonia. On the one hand, the paper deals with the selection of an old building to be renovated, the determination of the librarian needs, the compact shelving system chosen to store the documents in the building, the relation between physical space and information management, and the logistics involved in the load of low use documents from the libraries into the facility. On the other hand, we will show some examples of physical changes in Catalan libraries after large loads of documents to GEPA.

Fiscal sustainability and fiscal shocks in a dollarized and oil-exporting country: Ecuador

This paper investigates the fiscal sustainability of an emerging, dollarized, oil-exporting country: Ecuador. A cointegrated VAR approach is adopted in testing, first, if the intertemporal budget constraint is satisfied in Ecuador and, second, in identifying the permanent and transitory shocks that affect a fiscal policy characterized by inertia and a heavy dependence on oil revenues. Following confirmation that the debt-GDP ratio does not place the Ecuadorian budget under any pressure, we reformulate the model and identify two forces that push the fiscal system out of equilibrium, namely, economic activity and oil revenues implemented in the government budget. We argue that Ecuador needs to recover control of its monetary policy and to promote the diversification of its economy in order that non-oil tax revenues can replace oil revenues as a pushing force. Finally, we calculate quarterly elasticities of tax revenues with respect to Ecuador’s GDP and that of eight Eurozone countries. We illustrate graphically how the Eurozone countries with low positive or high negative elasticities’ levels suffer debt problems after the crisis. This finding emphasizes the pressing need for Ecuador to strengthen the connection between its tax revenues and output, and also suggests that the convergence of these elasticities in the Eurozone might contribute to the success of an eventually future fiscal union.

The effect of lignin as a natural adhesive on the physico-mechanical properties of Vitis vinifera fiberboards

Lignin was used as a natural adhesive to manufacture Vitis vinifera fiberboards. The fiberboards were produced at laboratory scale by adding powdered lignin to material that had previously been steam-exploded under optimized pretreatment and pressing conditions. The kraft lignin used was washed several times with an acidic solution to eliminate any contaminants and low molecular weight compounds. This research studied the effects of amounts of lignin ranging from 5% to 20% on the properties of Vitis vinifera fiberboards. The fiberboard properties evaluated were density, water resistance in terms of thickness swelling, water absorption, and the mechanical properties in terms of modulus of rupture, modulus of elasticity, and internal bond. Results showed that fiberboards made from Vitis vinifera without lignin addition had weaker mechanical properties. However, the fiberboards obtained using acid-washed kraft lignin as a natural adhesive had good mechanical and water resistance properties that fully satisfied the relevant standard specifications