Replacement therapy for iron deficiency improves exercise capacity and quality of life in patients with cyanotic congenital heart disease and/or the Eisenmenger syndrome

La teràpia suplementària de ferro millora la capacitat d’exercici i la qualitat de vida en malalts amb una cardiopatia congènita cianòtica i/ o síndrome d’Eisenmenger El dèficit de ferro és una troballa comú en la cardiopatia congènita cianòtica, i pot ser la causa d’una reducció en la capacitat d’exercici. Actualment, està indicada la reposició dels dipòsits de ferro en aquest grup de malalts, éssent les evidències científiques escasses. En el present treball investiguem la seguretat i eficàcia del tractament amb ferro en malalts amb una cardiopatia congènita cianòtica. Per tal motiu, vint-i-cinc malalts amb una cardiopatia congenita cianòtica i dèficit de ferro van ser inclosos de forma prospectiva entre Agost del 2008 i Gener del 2009. El tractament utilitzat fou fumarat ferròs oral, fins a una dosi màxima de 200 mg tres vegades al dia. En l’anàlisi basal i als tres mesos de seguiment es va utilitzar el test de qualitat de vida “CAMPHOR”, el test de la marxa dels 6 minuts i la prova d’esforç amb consum d’oxigen. L’edat mitja fou 39.9+/-10.9 anys, 80% dones. Catorze malalts tenien la síndrome d’Eisenmenger, sis una malaltia cianòtica complexa i cinc circulació de Fontan. Cap d’ells va haver d'interrompre el tractament degut a efectes adversos. Després de tres mesos de tractament, l’hemoglobina (19.0+/-2.9g/dL a 20.4+/-2.7g/dL, p&0.001), ferritina (13.3+/-4.7mug/L a 54.1+/-24.2mug/L, p&0.001) i saturació de transferrina (17.8+/-9.6% a 34.8+/-23.4%, p&0.001) van augmentar significativament. També hi va haver una millora significativa en la puntuació del test de qualitat de vida (20.7+/-10.9 a 16.2+/-10.4, p=0.001) i el test de la marxa (371.7+/-84.7m a 402.8.0+/-74.9m, p=0.001). No es van evidenciar canvis significatius en els valors de consum d’oxigen (40.7+/-9.2% a 43.8+/-12.4%, p=0.15). En definitiva, la teràpia suplementària amb ferro en els malats amb una cardiopatia congènita cianòtica i dèficit de ferro és segura i millora la qualitat de vida i la capacitat funcional. En aquest grup de malalts, per tant, és aconsellable identificar el dèficit de ferro i restaurar-ne els seus dipòsits.

Dissolution of Dynamic Electronic Institutions, a first approach: Relevant factors and causes

In the context of the digital business ecosystems, small organizations cooperate between them in order to achieve common goals or offer new services for expanding their markets. There are different approaches for these cooperation models such as virtual enterprises, virtual organizations or dynamic electronic institutions which in their lifecycle have in common a dissolution phase. However this phase has not been studied deeply in the current literature and it lacks formalization. In this paper a first approach for achieving and managing the dissolution phase is proposed, as well as a CBR process in order to support it in a multi-agent system

Estudio de la extracción química del fe en madera arqueológica subacuatica tratada previamente con peg 4000

Debido a la gran cantidad de muestras arqueológicas impregnadas con PEG que se encuentran contaminadas por compuestos insolubles de hierro, se plantea la posible extracción y formación de complejos Fe-L (L=PBTC) y sus efectos en (i) la estructura de la matriz orgánica, (ii) la estructura y propiedades físicas del PEG y (iii) el comportamiento de la muestra en la etapa posterior de almacenamiento. El proyecto analiza la formación de compuestos químicos y posibles modificaciones estructurales en el proceso de extracción del hierro. Consiste en un estudio sistemático de un sistema químico y su influencia en los procesos de precipitación de Fe3+ en medio acuoso. El proyecto se fundamenta en: (1) desarrollar un proceso experimental de optimización para la extracción de las sales contaminantes y (2) encontrar las técnicas analíticas óptimas que permitan apreciar modificaciones estructurales de los diferentes sistemas. Se determina la cantidad de hierro extraído mediante A.A. Las interacciones entre PBTC y PEG se analizan por IR. Las modificaciones de determinadas propiedades físicas se determinan por DSC y las estructurales mediante SEM. En las condiciones termodinámicas óptimas se obtiene una extracción superficial del hierro (30-35%). La disolución del PEG origina modificaciones de la masa y el volumen de la muestra

Estudio sobre la resistencia quimica de baldosas ceramicas no-esmaltadas para pavimentos industriales

The chemical resistance of ceramic tiles is the subject of the European Standard UNE-EN ISO 10545-13. In order to evaluate the effect of aqueous solutions of several chemicals agents on the aspect of the tile surface, this standard establishes a series of tests at room temperature followed by visual inspection. According to this standard the tiles of this study are classified as being of maximum resistance (UHA). However operating conditions can be more aggressive than those detailed in the standard. So, a systematic study has been undertaken. In the present work, the effect of aqueous solutions of several organic and inorganic acids on the tile surface is evaluated. Samples immersed in different solutions are subjected to the following conditions: T= 60º C; pH=2 and to agitation processes. Visual analysis, as well as optical microscopy and scanning electron microscopy (SEM) were performed in order to determine the possible variation of the superficial aspect of tiles. Moreover, atomic absorption spectrophotometry has been used in order to obtain quantitative information concerning the solubility of system M (III)-L (M= Fe; L= H2O or L= ligand). The results obtained show, in all cases, a progressive dissolution of iron oxide precipitates presents in the ceramic body

Role of fluid mixing in deep dissolution of carbonates

The presence of cavities filled with new minerals in carbonate rocks is a common feature in oil reservoirs and lead-zinc deposits. Since groundwater equilibrates rapidly with carbonates, the presence of dissolution cavities in deep carbonate host rocks is a paradox. Two alternative geochemical processes have been proposed to dissolve carbonates at depth: hydrogen sulfide oxidation to sulfuric acid, and metal sulfide precipitation. With the aid of geochemical modeling we show that mixing two warm solutions saturated with carbonate results in a new solution that dissolves limestone. Variations in the proportion of the end-member fluids can also form a supersaturated mixture and fill the cavity with a new generation of carbonate. Mixing is in general more effective in dissolving carbonates than the aforementioned processes. Moreover, mixing is consistent with the wide set of textures and mineral proportions observed in cavity infillings.

Networks of people in specialty production: family firms in the iron and steel Wire industries in Spain (1870-2000)

Capital intensive industries in specialized niches of production have constituted solid ground for family firms in Spain , as evidenced by the experience of the iron and steel wire industries between 1870 and 2000. The embeddedness of these firms in their local and regional environments have allowed the creation of networks that, together with favourable institutional conditions, significantly explain the dominance of family entrepreneurship in iron and steel wire manufacturing in Spain, until the end of the 20 th century. Dominance of family firms at the regional level has not been not an obstacle for innovation in wire manufacturing in Spain, which has taken place even when institutional conditions blocked innovation and traditional networking. Therefore, economic theories about the difficulties dynastic family firms may have to perform appropriately in science-based industries must be questioned

Unconventional magnetic behavior of iron-oxide nanoparticles in polymeric matrices

We report the results of magnetization and 57Fe Mössbauer spectroscopy measurements performed in the temperature range 5-300 K on composites containing iron¿oxide nanoparticles encased in polystyrene type resins. After carrying out a suitable field treatment in order to decouple the particles from the matrix, a fraction of the particles freely rotate in response to an applied magnetic field

Structural and magnetic characterization of the lithiated iron oxide LixFe3O4

The Rietveld profile‐analysis method is used to investigate the x‐ray diffraction pattern of lithiated Fe3O4. It is shown that, after exposure to air, pure magnetite coexists with a lithium‐inserted LixFe3O4 phase. The Mössbauer spectra at 300 and 4.2 K have been used to estimate the lithium content of the sample, the pure magnetite concentration, and the iron distribution over the available 16c and 16d sites of the spinel structure. Magnetization measurements from 4.2 to 120 K with an external magnetic field up to 150 kOe have been used to obtain the saturation magnetic moment, the magnetic anisotropy constants, and the susceptibility. It is concluded that a noncollinear spin structure should be present in Li0.5Fe3O4. These results indicate that there is no room‐temperature extrusion of iron even for x→2.0, but that on exposure to air LixFe3O4 samples with x>0.5 are oxidized at room temperature by delithiation.

Networks of people in specialty production: family firms in the iron and steel Wire industries in Spain (1870-2000)

Capital intensive industries in specialized niches of production have constituted solid ground for family firms in Spain , as evidenced by the experience of the iron and steel wire industries between 1870 and 2000. The embeddedness of these firms in their local and regional environments have allowed the creation of networks that, together with favourable institutional conditions, significantly explain the dominance of family entrepreneurship in iron and steel wire manufacturing in Spain, until the end of the 20 th century. Dominance of family firms at the regional level has not been not an obstacle for innovation in wire manufacturing in Spain, which has taken place even when institutional conditions blocked innovation and traditional networking. Therefore, economic theories about the difficulties dynastic family firms may have to perform appropriately in science-based industries must be questioned

Iron supply for erythropoiesis in the rabbit

Marrow radioiron uptake and marrow blood flow were measured in order to evaluate iron supply for erythropoiesis. Normal, phenylhydrazine-treated and bled animals were studied. The plasma iron turnover of seven normal rabbits was 1.49 +/- 0.22 mg/dl whole blood per d, of 11 rabbits treated 4 d before with phenylhydrazine was 5.16 +/- 1.81, and of four bled animals the plasma iron turnover was 3.75 +/- 1.61. The cardiac output and the percentage of blood flow to the marrow was increased in phenylhydrazine-treated and bled animals. Marrow iron flow in phenylhydrazine-treated animals was 38.3 +/- 32.6 micrograms/min per kg as compared with control values of 7.0 +/- 1.3 (P less than 0.01). This was due to an increase in marrow flow, an increase in plasma iron, and an increase in plasmatocrit. In bled animals, in spite of an increased marrow blood flow, marrow iron flow of 7.3 +/- 2.2 was similar to that of control animals due to a lower plasma iron concentration. The calculated marrow iron extraction of 3.7 +/- 2.4% in phenylhydrazine-treated animals was not different from that of control animals of 4.3 +/- 1.1, whereas extraction was increased in bled animals to 7.9 +/- 1.3 (P less than 0.01). In additional studies of transfused animals, acutely induced anemia was associated with an increased cardiac output, but also with a relative decrease in marrow flow, which left marrow iron supply unaffected. It would appear from these studies that an important mechanism for meeting the increased iron requirement of the hyperplastic erythroid marrow is an increase in marrow blood flow.

Learning form Nature to improve the heat generation of iron-oxide nanoparticles for magnetic hyperthermia applications.

The performance of magnetic nanoparticles is intimately entwined with their structure, mean size and magnetic anisotropy. Besides, ensembles offer a unique way of engineering the magnetic response by modifying the strength of the dipolar interactions between particles. Here we report on an experimental and theoretical analysis of magnetic hyperthermia, a rapidly developing technique in medical research and oncology. Experimentally, we demonstrate that single-domain cubic iron oxide particles resembling bacterial magnetosomes have superior magnetic heating efficiency compared to spherical particles of similar sizes. Monte Carlo simulations at the atomic level corroborate the larger anisotropy of the cubic particles in comparison with the spherical ones, thus evidencing the beneficial role of surface anisotropy in the improved heating power. Moreover we establish a quantitative link between the particle assembling, the interactions and the heating properties. This knowledge opens new perspectives for improved hyperthermia, an alternative to conventional cancer therapies.

Iron mining in Goa (India) : an interdisciplinary study

En aquest article es presenten breument els diferents capítols d’un treball interdisciplinari per tal d’entendre el context de prohibició de la mineria de ferro a Goa a finals del 2012 i proporcionar la informació necessària per tal d’orientar i gestionar la presa de decisions sobre l’activitat minera en un futur. Els sis primers capítols consisteixen en l’estudi del medi abiòtic, medi biòtic, fluxos de materials, aspectes socials, aspectes econòmics i finalment aspectes polítics. En canvi, en els dos últims capítols s'avaluen i es gestionen els impactes ambientals de la mineria mitjançant, per una banda, una anàlisi DPSIR i, d'altra banda, es proposen tres escenaris per integrar les diferents variables i fomentar la participació en la presa de decisions. S’ha dut a terme una extensa recerca mitjançant la recopilació de dades, entrevistes i visites a les zones d’estudi d’interès per tal d’entendre el conflicte de la mineria a Goa.

Direct Observation of Magnetic Metastability in Individual Iron Nanoparticles

X-ray photoemission electron microscopy combined with x-ray magnetic circular dichroism is used to study the magnetic properties of individual iron nanoparticles with sizes ranging from 20 down to 8 nm. While the magnetocrystalline anisotropy of bulk iron suggests superparamagnetic behavior in this size range, ferromagnetically blocked particles are also found at all sizes. Spontaneous transitions from the blocked state to the superparamagnetic state are observed in single particles and suggest that the enhanced magnetic energy barriers in the ferromagnetic particles are due to metastable, structurally excited states with unexpected life times