27 resultados para Internal-Friction
em Consorci de Serveis Universitaris de Catalunya (CSUC), Spain
Resumo:
We present the results of a geological and geotechnical characterization of the metallurgic waste from the Sierra Minera de Cartagena-La Union. We have studied eight tailings dams from which we collected and analysed 42 samples of metallurgic waste. We measured grainsize distribution, the specific gravity of solid particles, plasticity index, permeability, both in situ and in the laboratory, direct shear characteristicsand moisture content. According to size distribution the tailings can be classified as sandy silt. Their plasticity index ranges from medium to nil. The internal friction angle varies between 28 and 42 degrees. Cohesion is between 0 and 2.2 t/m2. The specific gravity of the solid particles ranges widely from 1.8 to 4 g/cm3. The saturated hydraulic conductivity values vary between 1.3x 10-5 and 3.2x 10-9 m/s.The water content measured in situ shows that the degree of saturation remains relatively high despite low rainfall and high evaporation rates. Several tailings dams have failed. The leading causes of tailings-dam failure are: 1) slope instability; 2) overflow; 3) erosion; and 4) subsidence or collapse. The main factor leading to dam failure is that the tailings stored in the ponds are highly saturated
Resumo:
An analysis is carried out in a sample of 738 industrial plants of the determining factors in the use of internal promotion of blue-collar workers to middle managers and skilled technicians as against their external recruitment. The use of internal promotion is positively correlated with variables indicative of the efforts made by plants to measure employees' skills, and to a lesser extent, with the level of specificity of investments in human capital made by blue-collar workers. Contrary to what was expected, variables related with the use and efficiency of other incentive systems have no significant influence on the increased or decreased use of internal promotion. These results are initial evidence that internal promotions are used to protect and favour specific investments, especially those made by firms in order to discover their workers' skills.
Resumo:
We analyse the effects of investment decisions and firms' internal organisation on the efficiency and stability of horizontal mergers. In our framework economies of scale are endogenous and there might be internal conflict within merged firms. We show that often stable mergers do not lead to more efficiency and may even lead to efficiency losses. These mergers lead to lower total welfare, suggesting that a regulator should be careful in assuming that possible efficiency gains of a merger will be effiectively realised. Moreover, the paper offers a possible explanation for merger failures.
Resumo:
We present a solution to the problem of defining a counterpart in Algebraic Set Theory of the construction of internal sheaves in Topos Theory. Our approach is general in that we consider sheaves as determined by Lawvere-Tierney coverages, rather than by Grothen-dieck coverages, and assume only a weakening of the axioms for small maps originally introduced by Joyal and Moerdijk, thus subsuming the existing topos-theoretic results.
Resumo:
The purpose of this paper is to examine the determinants of use internal or external labour market to fill a firm vacancy in SME’s taking into account the differences existing among blue and white collar jobs. Following different theories we can identify three main reasons for use internal candidates rather than external ones‐ firm specific knowledge, adverse selection problems and motivation‐. However, there are others factors that might affect this choice but the last theories don’t take into account. In this paper we try to shed some light on what are these other factors that may affect firm decision to use internal or external labour market. Particularly we analyses the relationship among new technologies, innovation activity and firm location on the staffing strategy. The results shows difference behaviour on the decision to fill a vacancy using internal or external labour markets between manufacturing and service firms, and this decision depends not only on firm internal characteristics, like technological complexity or innovation activity, but also on firm location. The results also support the hypothesis of ports of entry especially in the manufacturing sector.
Resumo:
There is a major concern in economic literature about innovation, which is the interaction between internal and external factors.. In this paper those activities are hypothesized as being determined by some territorial characteristics like labour skills, technological infrastructure, educational facilities, agglomeration economies and industrial structure. This assumption allows understanding why those innovative activities are not spread across space and are located into specific areas. We use a detailed survey containing microdata for 497 SMEs located in Catalonia.
Resumo:
Background and Purpose Early prediction of motor outcome is of interest in stroke management. We aimed to determine whether lesion location at DTT is predictive of motor outcome after acute stroke and whether this information improves the predictive accuracy of the clinical scores. Methods We evaluated 60 consecutive patients within 12 hours of MCA stroke onset. We used DTT to evaluate CST involvement in the MC and PMC, CS, CR, and PLIC and in combinations of these regions at admission, at day 3, and at day 30. Severity of limb weakness was assessed using the m-NIHSS (5a, 5b, 6a, 6b). We calculated volumes of infarct and FA values in the CST of the pons. Results Acute damage to the PLIC was the best predictor associated with poor motor outcome, axonal damage, and clinical severity at admission (P&.001). There was no significant correlation between acute infarct volume and motor outcome at day 90 (P=.176, r=0.485). The sensitivity, specificity, and positive and negative predictive values of acute CST involvement at the level of the PLIC for 4 motor outcome at day 90 were 73.7%, 100%, 100%, and 89.1%, respectively. In the acute stage, DTT predicted motor outcome at day 90 better than the clinical scores (R2=75.50, F=80.09, P&.001). Conclusions In the acute setting, DTT is promising for stroke mapping to predict motor outcome. Acute CST damage at the level of the PLIC is a significant predictor of unfavorable motor outcome.
Resumo:
This paper investigates the impact of television on internal migration in Indonesia. We exploit the differential introduction of private television throughout the country and the variation in signal reception due to topography to estimate the causal effect of media exposure. Our estimates reveal important long and short run effects. An increase of one standard deviation in the number of private TV channels received in the area of residence reduces future inter-provincial migration by 1.7-2.7 percentage points, and all migration (inter and intra-provincial) by 4-7.4 percentage points. Short run effects are slightly smaller, but still sizeable and statistically significant. We also show that respondents less exposed to private TV are more likely to consider themselves among the poorest groups of the society. As we discuss in a stylized model of migration choice under imperfect information, these findings are consistent with Indonesia citizens over-estimating the net gains from internal migration.
Resumo:
El proyecto Internal Message consiste en el desarrollo de un sistema de mensajería interna que comunique de forma fiable y segura a los usuarios de cualquier sistema de gestión de contenidos Joomla.
Resumo:
In the present work, microstructure improvement using FSP (Friction Stir Processing) is studied. In the first part of the work, the microstructure improvement of as-cast A356 is demonstrated. Some tensile tests were applied to check the increase in ductility. However, the expected results couldn’t be achieved. In the second part, the microstructure improvement of a fusion weld in 1050 aluminium alloy is presented. Hardness tests were carried out to prove the mechanical propertyimprovements. In the third and last part, the microstructure improvement of 1050 aluminium alloy is achieved. A discussion of the mechanical property improvements induced by FSP is made. The influence of tool traverse speed on microstructure and mechanical properties is also discussed. Hardness tests and recrystallization theory enabled us to find out such influence
Resumo:
Topological indices have been applied to build QSAR models for a set of 20 antimalarial cyclic peroxy cetals. In order to evaluate the reliability of the proposed linear models leave-n-out and Internal Test Sets (ITS) approaches have been considered. The proposed procedure resulted in a robust and consensued prediction equation and here it is shown why it is superior to the employed standard cross-validation algorithms involving multilinear regression models
Resumo:
The relevance of the fragment relaxation energy term and the effect of the basis set superposition error on the geometry of the BF3⋯NH3 and C2H4⋯SO2 van der Waals dimers have been analyzed. Second-order Møller-Plesset perturbation theory calculations with the d95(d,p) basis set have been used to calculate the counterpoise-corrected barrier height for the internal rotations. These barriers have been obtained by relocating the stationary points on the counterpoise-corrected potential energy surface of the processes involved. The fragment relaxation energy can have a large influence on both the intermolecular parameters and barrier height. The counterpoise correction has proved to be important for these systems
Resumo:
Immigrant organisations in the City of Oslo receive support from the government for their daily operation. In order to receive such support, each organisation must be membership-based and have internal democratic procedures. This paper raises the question of how we can understand this combination of support for ethnic based organisations and requirements of membership and internal democracy. It explores the usefulness of two partly overlapping ways of understanding this policy and discusses their interrelationship. Firstly, within the context of the crisis of multiculturalism, the paper discusses whether this combination is based on the aim of strengthening the organisations’ procedural commitment to liberal-democratic principles. Secondly, the paper analyses whether requirements of membership and internal democracy can mainly be understood within the framework of the Nordic model of voluntary organisation. By comparing the policy at three empirical levels, the paper concludes that this combination can mainly be understood within the framework of the traditional historical Nordic model, but that there is an ambiguity in this policy related to minority rights.
Resumo:
In this paper we use a gravity model to study the trade performance of French and Spanishborder regions relatively to non-border regions, over the past two decades. We find that,controlling for their size, proximity and location characteristics, border regions trade onaverage between 62% and 193% more with their neighbouring country than other regions,and twice as much if they are endowed with good cross border transport infrastructures.Despite European integration, however, this trade outperformance has fallen for the mostperipheral regions within the EU. We show that this trend was linked in part to a shift in the propensity of foreign investors to move their affiliates from the regions near their home market to the regions bordering the EU core.