Report on theorerical results of power generation and conversion

Experimental results of a new controller able to support bidirectional power flow in a full-bridge rectifier with boost-like topology are obtained. The controller is computed using port Hamiltonian passivity techniques for a suitable generalized state space averaging truncation system, which transforms the control objectives, namely constant output voltage dc-bus and unity input power factor, into a regulation problem. Simulation results for the full system show the essential correctness of the simplifications introduced to obtain the controller, although some small experimental discrepancies point to several aspects that need further improvement.

Ion assisted deposition of thin films by substrate tuned radio frequency magnetron sputtering

The substrate tuning technique was applied to a radio frequency magnetron sputtering system to obtain a variable substrate bias without an additional source. The dependence of the substrate bias on the value of the external impedance was studied for different values of chamber pressure, gas composition and rf input power. A qualitative explanation of the results is given, based on a simple model, and the role of the stray capacitance is clearly disclosed. Langmuir probe measurements show that this system allows independent control of the ion flux and the ion energy bombarding the growing film. For an argon flow rate of 2.8 sccm and a radio frequency power of 300 W (intermediate values of the range studied) the ion flux incident on the substrate was 1.3 X 1020-m-2-s-1. The maximum ion energy available in these conditions can be varied in the range 30-150 eV. As a practical application of the technique, BN thin films were deposited under different ion bombardment conditions. An ion energy threshold of about 80 eV was found, below which only the hexagonal phase was present in the films, while for higher energies both hexagonal and cubic phase were present. A cubic content of about 60% was found for an ion energy of 120 V.

Optimum power allocation for parallel Gaussian channels with arbitrary input distributions

The mutual information of independent parallel Gaussian-noise channels is maximized, under an average power constraint, by independent Gaussian inputs whose power is allocated according to the waterfilling policy. In practice, discrete signalling constellations with limited peak-to-average ratios (m-PSK, m-QAM, etc) are used in lieu of the ideal Gaussian signals. This paper gives the power allocation policy that maximizes the mutual information over parallel channels with arbitrary input distributions. Such policy admits a graphical interpretation, referred to as mercury/waterfilling, which generalizes the waterfilling solution and allows retaining some of its intuition. The relationship between mutual information of Gaussian channels and nonlinear minimum mean-square error proves key to solving the power allocation problem.

Robust power allocation algorithms for MIMO OFDM systems with imperfect CSI

This paper presents a Bayesian approach to the design of transmit prefiltering matrices in closed-loop schemes robust to channel estimation errors. The algorithms are derived for a multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) system. Two different optimizationcriteria are analyzed: the minimization of the mean square error and the minimization of the bit error rate. In both cases, the transmitter design is based on the singular value decomposition (SVD) of the conditional mean of the channel response, given the channel estimate. The performance of the proposed algorithms is analyzed,and their relationship with existing algorithms is indicated. As withother previously proposed solutions, the minimum bit error rate algorithmconverges to the open-loop transmission scheme for very poor CSI estimates.

Composition of Greenhouse Gas Emissions in Spain: an Input-Output Analysis

Extending the traditional input-output model to account for the environmental impacts of production processes reveals the channels by which environmental burdens are transmitted throughout the economy. In particular, the environmental input-output approach is a useful technique for quantifying the changes in the levels of greenhouse emissions caused by changes in the final demand for production activities. The inputoutput model can also be used to determine the changes in the relative composition of greenhouse gas emissions due to exogenous inflows. In this paper we describe a method for evaluating how the exogenous changes in sectorial demand, such as changes in private consumption, public consumption, investment and exports, affect the relative contribution of the six major greenhouse gases regulated by the Kyoto Protocol to total greenhouse emissions. The empirical application is for Spain, and the economic and environmental data are for the year 2000. Our results show that there are significant differences in the effects of different sectors on the composition of greenhouse emissions. Therefore, the final impact on the relative contribution of pollutants will basically depend on the activity that receives the exogenous shock in final demand, because there are considerable differences in the way, and the extent to which, individual activities affect the relative composition of greenhouse gas emissions. Keywords: Greenhouse emissions, composition of emissions, sectorial demand, exogenous shock.

Ecological and Economic Impacts within the Environmental Input-Output Framework

The environmental input-output approach reveals the channels through which the environmental burdens of production activities are transmitted throughout the economy. This paper uses the input-output framework and analyses the changes in Spanish emission multipliers during the period 1995-2000. By decomposing the global changes in multipliers into different components, it is possible to evaluate separately the economic and ecological impacts captured by the environmental input-output model. Specifically, in this study we distinguish between the effects on multipliers caused by changes in emission coefficients (the ecological impacts) and the effects on multipliers caused by changes in technical coefficients (the economic impacts). Our results show a significant improvement in the ecological impacts of production activities, which contributed negatively to changes in emission multipliers. They also show a deterioration in the economic impacts, which contributed positively to changes in emission multipliers. Together, these two effects lead to a small reduction in global multipliers during the period of analysis. Our results also show significant differences in the individual behaviour of different sectors in terms of their contribution to multiplier changes. Since there are considerable differences in the way individual sectors affect the changes in emission levels, and in the intensity of these effects, this means that the final effects will basically depend on the activity considered. Keywords: emission multipliers, multipliers' changes, ecological impacts, economic impacts.

Countervailing power? Collusion in markets with decentralized trade

We consider the collective incentives of buyers and sellers to form cartels in markets where trade is realized through decentralized pairwise bargaining. Cartels are coalitions of buyers or sellers that limit market participation and compensate inactive members for abstaining from trade. In a stable market outcome, cartels set Nash equilibrium quantities and cartel memberships are immune to defections. We prove that the set of stable market outcomes is non-empty and we provide its full characterization. Stable market outcomes are of two types: (i) at least one cartel actively restrains trade and the levels of market participation are balanced, or (ii) only one cartel, eventually the cartel that forms on the long side of the market, is active and it reduces trade slightly below the opponent's.

I want you! An experiment studying the selection effect when assigning distributive power.

We study whether selection affects motivation. In our experiment subjects first answer a personality questionnaire. They then play a 3-person game. One of the three players decides between an outside option assigning him a positive amount, but leaving the two others empty-handed and allowing one of the other two players to distribute a pie. Treatments differ in the procedure by which distributive power is assigned: to a randomly determined or to a knowingly selected partner. Before making her decision the selecting player could consult the personality questionnaire of the other two players. Results show that knowingly selected players keep less for themselves than randomly selected ones and reward the selecting player more generously.

An input-output analysis of the "key" sectors in CO2 emissions from a production perspective: an application to the spanish economy

Here we present an approach that allows the identification of the "key" productive sectors responsible for CO2 emission. For this purpose, we develop an input–output methodology from a supply perspective. We focus on the impact of an increase in the value-added of the different productive sectors on total CO2 emissions and we identify the productive sectors responsible for the increase in CO2 emissions when there is an increase in the income of the economy. The approach shows the contribution of the various sectors to CO2 emission from a production perspective and allows us to identify the sectors that deserve more consideration for mitigation policies. This analysis is complementary to the input–output analysis from a demand perspective. The methodology is applied to the Spanish economy.

Demand elasticity and market power in the spanish electricity market

In this paper we check whether generator's bid behavior at the Spanish whosale electricity market is consistent with the hypothesis of profit maximization on their residual demands. Using OMEL data, we find the arc-elacticity of the residual demand around the system marginal price. The results suggest thet the larger firms are not actually profit-msximization. We argue how the regulatory environment may drive these results. Finally, we repeat the analysis for the first session of the intra-day market where presumably firms may not have the same incentives as in the day-ahead market.

Two algorithms to find a power integral basis

"Vegeu el resum a l'inici del fitxer adjunt."

Economic impacts of alternative water policy scenarios in the Spanish production system: an input-output analysis

The objective of this paper is to analyse the economic impacts of alternative water policies implemented in the Spanish production system. The methodology uses two versions of the input-output price model: a competitive formulation and a mark-up formulation. The input-output framework evaluates the impact of water policy measures on production prices, consumption prices, intermediate water demand and private welfare. Our results show that a tax on the water used by sectors considerably reduces the intermediate water demand, and increases the production and consumption prices. On the other hand, according to Jevons' paradox, an improvement in technical efficiency, which leads to a reduction in the water requirements of all sectors and an increase in water production, increases the amount of water consumed. The combination of a tax on water and improved technical efficiency takes the pressure off prices and significantly reduces intermediate water demand. JEL Classification: C67 ; D57 ; Q25. Keywords: Production prices; Consumption prices; Water uses; Water policy; Water taxation.

Income growth and atmospheric pollution in Spain: an input-output approach

The relationships between economic growth and environmental pressures are complex. Since the early nineties, the debate on these relationships has been strongly influenced by the Environmental Kuznets Curve hypothesis, which states that during the first stage of economic development environmental pressures increase as per capita income increases, but once a critical turning-point has been reached these pressures diminish as income levels continue to increase. However, to date such a delinking between economic growth and emission levels has not happened for most atmospheric pollutants in Spain. The aim of this paper is to analyse the relationship between income growth and nine atmospheric pollutants in Spain. In order to obtain empirical outcomes for this analysis, we adopt an input-output approach and use NAMEA data for the nine pollutants. First, we undertake a structural decomposition analysis for the period 1995-2000 to estimate the contribution of various factors to changes in the levels of atmospheric emissions. And second, we estimate the emissions associated with the consumption patterns of different groups of households classified according to their level of expenditure

Análisis input-ouput y emisiones de CO2 en España: Un primer análisis para la determinación de sectores clave en la emisión

El objetivo de estas páginas, que es parte de una investigación más amplia, es el desarrollo de un primer análisis de las relaciones entre la estructura productiva de la economía española y las emisiones de CO2, el más importante de los gases de efecto invernadero, a la atmósfera. Después de exponer la metodología utilizada, que permite la utilización conjunta en análisis expost, como el que nos ocupa, de los multiplicadores de oferta y demanda, se obtienen resultados relevantes que permiten un estudio detallado de las mencionadas relaciones. Posteriormente se determinan los sectores